Lync freeze (not response) when press ` ( change language key)

ref
https://social.technet.microsoft.com/Forums/office/en-US/68ac31b0-0228-416c-a524-b3f356d0f010/lync-2013-client-hang-and-not-response-while-user-try-to-switch-input-language-by-grave-accent-key?forum=lyncprofile
I  just download and fresh install from portal.office.com
the system is clean  fresh  and  update to the most recently patch
After this issue , I try to
1. repair Office 2013 and Lync 2013  : the result > still freeze
2. Uninstall office 2013 and lync 2013  -> Reboot ->  install  office/ Lync : the result > still freeze
3. change the language key from   '  to   shif+alt   : the result > Not freeze
4. Chage the language key  back to  '   : the result > Freeze

Hi Pinkybear,
This is a known issue, to work around this issue, you must select one of the other keyboard shortcuts from Control Panel.
The related KB for your reference.
Lync 2013 stops responding when you change input language between English and Thai by using grave accent
http://support.microsoft.com/kb/2987778
Best regards,
Eric

Similar Messages

  • Windows 10 - Skype not respond when I change language with Grave accent

    Windows 10 - Skype not respond when I change language with Grave accent 

    Switching languages quickly in Windows 10 with the current version of Skype is a known issue.  Hopefully a future update will address the problem.

  • OneNote 2013: Font changes when pressing Enter / Return key

    I have the same problem as this guy (who didn't get a relevant answer): http://social.technet.microsoft.com/Forums/office/en-US/233833f7-dde8-414d-bdca-604ed8d57667/onenote-2013-font-changes-when-pressing-enter-return-key?forum=officeitpro
    I set my default to Calibri 14, but every time I press enter (I make a lot of bullet lists) the font changes to Calibri 11. 

    Hi,
    Did you change the default font after you typed a few words in a note container?
    Setting the default font in Microsoft Office OneNote affects text that you type in new note containers only. It does not affect existing text or text that you add to existing note containers.
    If you want to change the font in an existing note container, you need to change it manually under
    Home tab > Basic Text.
    Thanks,
    Steve Fan
    TechNet Community Support

  • I bought my iphone 5s a week before and now its volume "up" button is not working when pressed.Does anybody know what to do to make it work?I have a one year warranty.Should i give it to apple retail shop or is there any way to solve this problem?

    I bought my iphone 5s a week before and now its volume "up" button is not working when pressed.Does anybody know what to do to make it work?I have a one year warranty.Should i give it to apple retail shop or is there any way to solve this problem?

    IF it is a manufacturing defect and you bought the device from Apple or an authorized Apple retailer, then take it into Apple.

  • I have a 27" desktop mac running with OSX 10.6.8.  The bluetooth keyboard started not typing when some of the keys are pressed. Plugged in a wired keyboard, started doing the same thing.  Now the cursor moves but cannot select anything.  Suggestions?

    I have a 27" desktop mac running with OSX 10.6.8.  The bluetooth keyboard started not typing when some of the keys are pressed. Plugged in a wired keyboard, started doing the same thing.  When opening up a browser or application, the cursor moves but cannot select anything.  Suggestions?

    Maybe something in these Apple support articles will help.
    Keyboard Doesn’t Work
    Keyboard Keys Do Not Respond
    Keyboard/Mouse – Troubleshooting Wireless

  • Hi! I have a problem. My macbook pro install all applications only in german( when i change language, it still install in german) This began from aperture 3, it was installed in german, than all apps.Please help.

    Hi! I have a problem. My macbook pro install all applications only in german( when i change language, it still install in german) This began from aperture 3, it was installed in german, than all apps.Please help.

    Hi! I have a problem. My macbook pro install all applications only in german( when i change language, it still install in german) This began from aperture 3, it was installed in german, than all apps.Please help.

  • Macbook pro not opening when press power button

    my mac book pro not opening when press power button even battery is full.

    I already tried with the Battery in and without but no luck. I'm sure it's not that kind of problem unfortunally

  • HT201559 I have tried to reset and restart my iPod touch but it remains stuck at the apple logo and turns off. The iPod is not responsive when i connect it to my computer or wall charger.

    I have tried to reset and restart my iPod touch but it remains stuck at the apple logo and turns off. The iPod is not responsive when i connect it to my computer or wall charger.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • No sound when press physical keyboard keys

    Hello ! By clicking on the physical keyboard keys on my Blacberry Passport no sound ( tone) as when you press the virtual keys ( numbers, symbols, ....). And how are you ? What could be the problem? Is there a sound when you press the physical keys ?
    Solved!
    Go to Solution.

    Hi @SPBU 
    By design, audible 'typing noise' will not occur when pressing any of the physical keys.
    Audible noise will only occur when using the virtual keyboard. Thanks! 
    Did someone help you? Click Like! Did a post solve your issue? Click Accept as Solution!
    Follow me on Twitter or Google+ and subscribe to the Inside BlackBerry Help Blog

  • HT4061 my ipad air is in recovery mode and it is not starting.I pressed the main key when connected to my computer but there was no response

    My ipad has gone in recovery mode when I tried to upgrade my system software.it showed a loading bar and then turned off and never started.i tried to turn it on by pressing the home key and start button simultaneously but there was no response.i even connected it to the  itunes but there was no response by the ipad

    RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. If you did not do step 4 properly, start all over again.

  • Trackpad not responsive when MB connected to an external device

    After I installed Maverick on my MP retina, every time I connected my smartphone the screen freezes and the trackpad is not responsive anymore. Never happened before. What shall I do? Reinstall Lion? Thanks.

    The higher resolution is pushing you to the next higher rendering resolution.  If you are in Develop and set zoom position to 1:4 or 1:8 it should speed back up (each level is 4 times as fast as tge previous).

  • Condition value not updated when qty changed

    hi all,
    I have created a new condition ZPR1 (copied from PR00) and use a new formula for it.
    There is a problem when I change the qty after the item is billed.
    Suppose the original qty is 1 and total ZPR1 price is 100. When I change the qty to 2, the ZPR1 price is still 100! It will change to 200 if the item is not billed.
    Anybody encounters such problem and how to solve?
    Thanks

    Hi,
    I don't mean to change the unit price.
    I mean the condition value (the item total price) is not updated
    You can't change the price anymore in the condition tab after you billed
    But when you change the qty of the item, the total value should change accordingly
    And I think for my case I should not cancel the invoice. Suppose original qty is 10, and there is partial shipment of 7 and billed the customer. Later customer request to reduce the qty to 7 to complete the item. We should not cancel the invoice in this case.
    Try to test with PR00 and PN00, you will see the item value will be changed according to the item qty.

  • Email not triggerd when employee change add in ESS

    Hi Guru,
    When emplyee changes there add on ESS email not triggered to payroll team
    can any help me in this

    Hi
    We have Dynamic action it works for if we change Add in SAP but it wont work when we do same thing from ESS
    is this the campatibility issue.
    because when we debug this when we find that this is not going through one user exit.

  • HT1619 menu does not appear when pressing the menu bottom from the apple remote

    I got a apple remote but the menu does not appear on the computer when pressing the menu bottom!?

    Prior to Lion, it used to invoke the menu of the FrontRow application.  FrontRow is no longer available with Lion.  The menu button will work with apple TV. 
    Regards,
    Captfred

  • Is there a fix for a slow response when pressing stop?

    When pressing stop (either by mouse or pressing spacebar), there is always a one to two second delay before the music actually stops. Why is this? Any fix?
    I have been using Digital Performer and that always stops on a dime. It is a bit annoying to hear another 1- 2 seconds of music after hitting "Stop". Any ideas?
    This is not a latency issue.
    Thanks

    A lag setting in like that could also be a sign of needed RAM exceeding available RAM - at which time parts of the contents of RAM have to be temporarily stored to or retrieved from disk.
    That lag is from the OS needing to read RAM content from disk, or the OS needing to write RAM content to disk - and more often than not, both simultaneously. Only after this has been done ("swapping") is the correct RAM content - that's needed for Logic to 'stop' - in place and can the command actually be executed.
    Installing more RAM should help, though you might want to check the (real) RAM use of your laggy Logic project via Activity Monitor first, just to be sure.
    One of the big RAM eaters, apart from sampled acoustic instruments, is Flex. used RAM can grow quickly when Flex editing. If that happens it may be wise to quit and restart Logic from time to time.

Maybe you are looking for