Lync Inactive Timer Not Working - Starts after 5 minutes rather than 20 minutes

I have a client who has her Inactive timer set to 20 minutes. I verified that the registry entry is set as such. We have rebooted her system and cleared her Lync cache files. She does not have a screen saver set, and her plugged
in power setting for turning off the display is set for 30 minutes, and put the computer to sleep is Never. Battery power options has the display turning off after 5 minutes. Her system is plugged in and the Inactive status kicks off
after 5 minutes and the display does not turn off. I can not figure out why it is kicking off after 5 minutes rather than 20 minutes as it is set. Any ideas on what else might be causing it to go inactive after 5 minutes? Or what else I can
try to get it to initiate the 20 minutes that it has set?

My apologies, I didn't check the location being the 2010 forum and was hoping it might still be 2013 as we get a lot of 2013 posts in the 2010 forums. The app doesn't currently work with 2010 which stinks. I was thinking if it
worked we could beef it up so it worked well for you and add some additional features. In the end, there's no native option but it's a good idea.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Similar Messages

"disp+work" process in not getting started after kernel upgradation

Hello Experts,
Good day…..,
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741, but the “disp+work” process is not getting started after kernel upgrade.
I have posted “dev_W0” log &
“disp+work” command result obtained in CMD prompt of respective server.
Please help me out in this. Thanks all in advance.
“dev_w0” Log”
trc file: "dev_w0", trc level: 1, release: "741"
* ACTIVE TRACE LEVEL           1
* ACTIVE TRACE COMPONENTS      all, MJ
M sysno      55
M sid        TNG
M systemid   562 (PC with Windows NT)
M relno      7410
M patchlevel 0
M patchno    42
M intno      20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile D:\usr\sap\TNG\SYS\profile\TNG_DVEBMGS55_ABTHMSSB01
M pid        2392
M
M
M Wed Jul 23 02:04:35 2014
M kernel runs with dp version 208000(ext=117000) (@(#) DPLIB-INT-VERSION-208000-UC)
M length of sys_adm_ext is 500 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 2392) [dpInit.c 731]
M DpCommonParamInit: rdisp/core_file_size = default --> no change
I MtxInit: 30000 0 0
M
M Wed Jul 23 02:04:36 2014
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: alloate/attach shared memory (mode=ATTACH)
M DpShMCreate: sizeof(wp_adm)                         24288    (1104)
M DpShMCreate: sizeof(tm_adm)                          51472080             (256080)
M DpShMCreate: sizeof(ca_adm)                           432000 (72)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/7464064/7583152
M DpShMCreate: sizeof(comm_adm)                   7583152                (14904)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm)                      0              (296)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)                         0              (80)
M DpSockTableSize: max/headSize/ftSize/tableSize=500/16/520064/520080
M DpShMCreate: sizeof(sock_adm)                       520080 (1016)
M DpShMCreate: sizeof(vmc_adm)                       0              (3208)
M DpShMCreate: sizeof(wall_adm)                        (ft=41664/fi=67472/hd=64/rec=192)
M DpShMCreate: sizeof(amc_rec_adm)                              (ft=86464/fi=67472/hd=64/rec=416)
M DpShMCreate: sizeof(websocket_adm)                         (ft=28864/hd=64/rec=272)
M DpShMCreate: sizeof(gw_adm)          64
M DpShMCreate: sizeof(j2ee_adm)       3936
M DpShMCreate: SHM_DP_ADM_KEY                  (addr: 00000000103D0050, size: 60433936
M DpShMCreate: allocated sys_adm at 00000000103D0250
M DpShMCreate: allocated wp_adm_list at 00000000103E20F0
M DpShMCreate: allocated wp_adm at 00000000103E2410
M DpShMCreate: allocated tm_adm_list at 00000000103E84F0
M DpShMCreate: allocated tm_adm at 00000000103E8730
M DpShMCreate: allocated ca_adm at 00000000134FF000
M DpShMCreate: allocated comm_adm at 0000000013568980
M DpShMCreate: system runs without slock table
M DpShMCreate: allocated sock_adm at 0000000013CA4130
M DpShMCreate: allocated vmc_adm_list at 0000000013D232C0
M DpShMCreate: system runs without VMC
M DpShMCreate: allocated gw_adm at 0000000013D23560
M DpShMCreate: allocated j2ee_adm at 0000000013D237A0
M DpShMCreate: allocated ca_info at 0000000013D24900
M DpShMCreate: allocated wall_adm (ft) at 0000000013D24B40
M DpShMCreate: allocated wall_adm (fi) at 0000000013D2F000
M DpShMCreate: allocated wall_adm (head) at 0000000013D3F990
M DpShMCreate: allocated amc_rec_adm (ft) at 0000000013D3FBD0
M DpShMCreate: allocated amc_rec_adm (fi) at 0000000013D54F90
M DpShMCreate: allocated amc_rec_adm (head) at 0000000013D65920
M DpShMCreate: allocated websocket_adm (ft) at 0000000013D65B60
M DpShMCreate: allocated websocket_adm (head) at 0000000013D6CE20
M DpShMCreate: initialized 21 eyes
M DpCommAttachTable: attached comm table (header=0000000013568980/ft=0000000013568990/fi=0000000013C86E10)
M DpSockAttachTable: attached sock table (header=0000000013CA4130/ft=0000000013CA4140)
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use Semphore 33 for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X
X Wed Jul 23 02:04:37 2014
X mm.dump: set maximum dump mem to 96 MB
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Wed Jul 23 02:04:44 2014
M ThInit: running on host ABTHMSSB01
I MtxInit: 0 0 0
M
M Wed Jul 23 02:04:45 2014
M calling db_connect ...
B Loading DB library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' is "741.10", patchlevel (0.42)
C Prepending D:\usr\sap\TNG\DVEBMGS55\exe to Path.
C Register application info.
C
C Wed Jul 23 02:04:47 2014
C Oracle client version: 10.2.0.4.0, (dbsl 741 040714, UNICODE[2])
C Detailed Oracle client (patch) info not available.
C *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c    2406]
C     Only Secure Connect method possible.
M ***LOG R19=> ThDbConnect, db_connect ( DB-Connect 000256) [thDatabase.c 76]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step TH_INIT, thRc ERROR-DB-CONNECT_ERROR, action STOP_WP, level 1) [thxxhead.c   2281]
M Wed Jul 23 02:04:48 2014
M
M Info for wp 0
M
M    pid = 2392
M    severity = 0
M    status = 0
M    stat = WP_NEW
M    waiting_for = NO_WAITING
M    workerType = DP_WORKER_DIAWP
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M mode_cleaned_counter = 0
M    control_flag = 0
M    report = > <
M    action = 0
M    tab_name = >                              <
M
M ThIErrHandle: no current incoming request
M
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ABTHMSSB01_TNG_55 on host ABTHMSSB01 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Wed Jul 23 02:04:48 2014
M * RELEASE 741
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 16797709
M * MODULE D:/depot/bas/741_REL/src/krn/si/th/thxxhead.c
M * LINE 2470
M * COUNTER 1
M *
M *****************************************************************************
M
M PfRejectStatistic: clear statistic record
M PfClearAllRec: clear statistic area
M PfClearAllRec: statRecordAction = STAT_RECORD_ACTION_REJECT
M Entering TH_CALLHOOKS
M ThCallHooks: call hooks for event BEFORE_DUMP
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 2392) [dpnttool.c 335]
“Desp+Work” Command result:
C:\Users\tngadm>disp+work
disp+work information
kernel release 741
kernel make variant 741_REL
compiled on NT 6.0 6002 x86 MS VC++ 16.00 for NTAMD64
compiled for                  64 BIT
compilation mode UNICODE
compile time Jul 9 2014 16:39:46
update level 0
patch number 42
source id 0.042
RKS compatibility level 0
supported environment
database (SAP, table SVERS) 700
710
701
702
703
                              711
720
730
731
732
738
740
operating system
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
Windows NT 6.1
Windows NT 6.2
Windows NT 6.3
C:\Users\tng

C *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c    2406]
C     Only Secure Connect method possible.
For this issue you need to set up SSFS.
1639578 - SSFS as password storage for primary database connect
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741
Are you sure kernel 741 is compatible with an EHP 4 system ?
Read this SAP note
1969546 - Release Roadmap Kernel 740
Regards
RB

HT1338 Application "FINDER"not responding,Desktop files disappeared & " also "Trash" not working svn after relaunching several times.

Application "FINDER"not responding,Desktop files disappeared & " also "Trash" not working svn after relaunching several times.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter the name of the crashed application or process (Finder) in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

My new i phone 6 plus some time not connecting wifi after switching off it start and after some time gain its stop connection please advice

my new i phone 6 plus some time not connecting wifi after switching off it start and after some time gain its stop connection please advice

settings - general - reset - reset network settings.

My MacBook Pro keyboard not working correctly after Win7 bootcamp installation. In OSx boot it keep Win keyboard. How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

My MacBook Pro keyboard not working correctly after Win7 bootcamp installation.
Installation went well but when I boot either with OSx or Win it always keeps Windows keyboard.
How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

Hi - I have the exact same model as your MacBook and had a few questions as mine is acting up. I upgraded the ram to 8gb (2x 4GB ram) and ever since then my computer has not been running as smoothly and the start up time is horrendous. Have you encountered this problem? And if so how did you fix? What would you advise me do?
I was thinking of reverting back to the original factory 4GB then rebooting the entire computer. Any suggestions?
Thanks in advance!
Allen

Social App not working even after update from noki...

nokia n8 social loading feeds.
My wife and i have the same problem now, only last week she said my phone will not work on facebook the widget on main home screen will not load feeds at all, and the widget is now blank saying refresh all the time, so i linked the phone up to the computer and did a scan for new updates with nokia updater which you can download from nokia site.
Its now the 4th jan and the phones still will not work even after and update from a socail app,
nothing , facebook will load after a few pushes, and looks like its loading till it says loading feeds then it says the (wording unable to load news feeds)

Uninstall the social app and reboot your phone. Then go to software updates and reinstall from the offering given in the updates. I've uninstalled and reinstalled social twice and it has worked both times.
blitZkid
Nokia C7: Running on Nokia Belle
"If I'm helpful in anyway, a click of appreciation on the star would be nice"

HT5622 Why is my Apple ID or password not working anymore after I reset my password?

Why is my Apple ID or password not working anymore after I reset my password?
It keep asking my password... I have reset it, then, when I enter the new password, it's not accepted...

Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

Aluminum Wireless Keyboard not working properly after Firmware update 1.1

Hi,
Well, as the subject says, my keyboard is not working properly after I updated the firmware. The problem is that several keys (delete, down arrow, brackets and apostrophe) stopped working right after I installed the update. I never dropped it or hit it. And I did not stop or interrupt or did anything during the install. I take very good care of it.
I have already tried toubleshooting with the support page, restarting the iMac, taking off the batteries, setting it up with bluetooth again, going back a week with time machine and to reinstall the firmware. So, if you have something new for me to try, I will really apreciate it.
Thanks in advance.
Franco.

I have 24" iMac with the Apple wireless M&KB - I know this is basic but have you tried a fresh set of batteries? My KB will refuse to establish connection when batteries are on the weak side the firmware update may just be a co incidents. If your wireless mouse is working OK then I would guess the blue tooth is functioning.
Not sure about the 10.49 download - are your other file downloads completing properly? Are there any error messages?
Steve

ITunes / iPhone not working properly after newest update...

iTunes is not working properly after the newest update... It dosen't see my iPhone, the program acts very sluggish, and has trouble loading the Store. Anyone have a solution or an explanation? I have tried the suggestions found in other threads ie. restart, re-download, charge phone, restart phone and so on. Nothing works. Everything was working fine until iTunes and the new ios were installed. After that it all went to crap. Thanks, Randy...

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Keyboard not working correctly after updating to 8.1 64bit pro.

Keyboard not working correctly after updating to 8.1 64bit pro.
After I updated, everything seemed ok and then all of the sudden I rebooted and only the f1 – f12 row would work. I resorted to resorted to unplugging and removing the battery and it would work for a short amount of time. This has been reported on other laptops as well, see here.
http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/windows-81-keyboard-problem-cou...
I think it can be solved with a driver update from hp or the keyboard builder but none is online.

Hi,
Please put the units product no. in the link and check if your PC is tested by HP with Windows 8.1
http://www8.hp.com/us/en/ad/windows-8/upgrade.html
Let me know if you need more help.
I am an HP employee.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on “Kudos” STAR to say thanks!***

Ps CC 2014 is not working correctly after mac update to Yosemite 10.10.1. Select does not protect unselected areas. Magic eraser erases unselected ares.

Ps CC 2014 is not working correctly after mac update to Yosemite 10.10.1. Select does not protect unselected areas. Magic eraser erases unselected ares.

Yes my particular issue is not like yours. However, there have been many other laptop users experiencing similar problem to yours after 3.10 kernel. Mostly it seems to be bumblebee users that experience your problem with the blank screen. We do know that nvidia have yet to make their official drivers work with kernel 3.10 and up. The drivers in the Arch repository have been patched to work with 3.10. From what I have seen, this also only seem to be affecting laptops with newer nvidia gpu's. I fear there is not much to do with this problem until nvidia give official 3.10 kernel support.
My suggestion would be to stick with 3.9.9 kernel and the drivers that work with it, and don't upgrade those packages until nvidia has addressed these issues. If you have a look at the nvidia forums you will see quite a number of topics mentioning black screen when starting x on 3.10 kernel, and also a thread for the system dying. Reading some of the threads there may help you keep up to date on whether or not the issue seem to be solved.
https://devtalk.nvidia.com/default/board/98/

My mini i pad 2 retina display screen is not work correctly after two days of buying appear some gray line on screen un furtunately i live in iran and i havnot access to any i pad store please guide me

My mini i pad 2 retina display screen is not work correctly after two days of buying appear some gray line on screen un furtunately i live in iran and i havnot access to any i pad store please guide me

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
 Cheers, Tom

Window 10 upgrade. Graphics driver not working even after re-install

Notebook pavilion DV6 3280. Just upgraded to Windows 10 and AMD graphics driver not working even after re-install. What do I do? Is there another driver not on the HP Website that I should try?

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Asha 501 : Whatsapp not working properly after 14....

Hi,
whatsapp is not working properly after software update, some times contacts never sync. screen goes pale and chat window doesn't show properly.
Looks like memory problem after the new updates or anything else?

Similar complains around the web. I'd recommend getting the phone flashed at a care point to see if that improves the situation.
Do wait for a couple of weeks for the full firmware files to be available at the respective care centers. AFAIK, they are not yet available in India.

Iphone 4 front camera not working even after reboot,resets and restore.

i am using iphone 4 .I have problem that front camera is not working even after reboot,resets and restore with itunes.I thing there is a hardware problem.
Now i wont to go apple store for replace the phone because phone is under warranty period.But problem is that i lost the receipt.Will apple store help me without my receipt ?please help me

If setting up as new device without using the latest backup does not bring the camera function back, get it looked at or serviced by Apple:
How to back up your data and set up as a new device
Apple - Support - Service Answer Center

Lync Inactive Timer Not Working - Starts after 5 minutes rather than 20 minutes

Similar Messages

Maybe you are looking for