Lync monitoring Details reports are not getting opened, Getting SQL error like "Cannot impersonate user for data source 'CDRDB"

Hi,
Two month before, We have deployed Lync 13 set up with lync monitoring and archiving service enabled. After configuring we have the Lync monitoring and archiving services are working fine... few weeks back I have changed the Admin Password
of the Lync Setup. After that Lync Monitoring and Archiving services are not working.
when I try open Lync monitoring service from web UI,
http://localhost/ReportServer_LyncMonitoring/
Web UI is opening but Reports home page is not Accessible , Getting error Like
"An error has occurred during report processing. (rsProcessingAborted)
Cannot impersonate user for data source 'CDRDB'. (rsErrorImpersonatingUser)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
The user name or password is incorrect"
Please help me to trouble shoot this problem.
Thanks,
Rajarajan.D

Hi Rajarajan.D
You probably need to update the password against the CDRDB datasource in SSRS Report manager, take a look at this article: http://lyncme.co.uk/microsoft-lync-server-2013/cannot-impersonate-user-for-data-source-cdrdb-rserrorimpersonatinguser-error/
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
Georg Thomas | Lync MVP
Blog www.lynced.com.au | Twitter
@georgathomas
Lync Edge Port Check (Beta)
This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Similar Messages

RDL Reports are not working after installing SQL Server 2012 Service Pack 2 in the SharePoint integration Mode

I am using Reporting Service Integration mode with SharePoint. SSRS is installed on separated machine of SharePoint stacks in Integration Mode. Everything was working properly and I could create/edit/modify RDL reports(parameters, Datasource, Subscription)
inside SharePoint and Document Libraries.
But after installing SQL Server 2012 Service Pack 2, on opening RDL reports inside SharePoint I receive this error message.
The permissions granted to user 'i:0#.f|membership|username' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'i:0#.f|membership|username' are insufficient for performing this operation
I should mention that SSRS is installed in the SharePoint integration Mode and there is no SSRS management console.

Hi Hedayat-Abedijoo,
According to your description, you are using Reporting Services in SharePoint Integrated mode, and everything worked fine before you install SQL Server 2012 Service Pack 2. After the package is installed, when you open RDL reports, the error occurred: The
permissions granted to user 'i:0#.f|membership|username' are insufficient for performing this operation.
According to my search, there may be two reasons for the problem:
This is caused when the application pool account that runs the SharePoint Web application you are on in IIS and the application pool account that SharePoint believes is running the site differ. This happens if the application pool account is changed directly
in IIS instead of through SharePoint (using the approved method).
This error can be caused when Kerberos authentication has been set up correctly and delegation in a double hop scenario will succeed, but Reporting Services integration has been set up for Trusted Account rather than Windows Authentication. This causes
SharePoint to continue to impersonate the logged-on user when contacting Reporting Services; when Reporting Services compares the application pool account to the user account making the request, they are not equal.
In this case, we can solve the problem by changing the application pool account in IIS back to the previous account and set AuthenticationTypes to RSWindowsNTLM only. For detail information, please refer to 8.3 “The permissions granted to user 'Domain\User'
are insufficient for performing this operation” in the document:http://msdn.microsoft.com/en-us/library/ee384252(SQL.100).aspx
If you have any questions, please feel free to let me know.
Thanks,
Wendy Fu

BO 4.1 WEBI reports are not refreshing and FWB 00032 error while login

Hello All, First, We are not able to refresh our WEBI reports its hanging in between and throwing errors sometimes. Second, while login its giving below error. Account information not recognized: Invalid confidential channel. (FWB 00032) found relevant note : 1737852, but the pre-requisite is met. Issue is intermittent but its resolved now BO application restart. but we need to find out what could be the reason for this. Anyone has got this kind of situation. Regards Munish

Any Idea frnds.

Early Watch Reports are not getting generated.

Hi Experts,
I'm new to Solution Manager.
We were getting EWA report regularly till last month in solution manager.
But for the past one month the reports are not getting generated and I'm getting the following error message.
Kindly help
The data for this session is overdue. Data has not yet been transferred from the associated satellite system.
Go to the Service Data Control Center (transaction SDCCN) in the satellite system and check why the data has not been sent.
Typical sources of errors are:
The RFC connection for the SAP Solution Manager system is not working.
The 'Task Processor' background job, which collects the session data, has been changed.
Problems arose while data was being collected (see the detail log for the task that collects the session data).
A periodic 'SDCC Maintenance Package' task has not been scheduled to check whether your SAP Solution Manager system requests session data.
Session number: 1000000000704
Thanks,
Shanahas

Hi,
The maintanance package is getting executed everyday. However, it is throwing some error.
I have checked the RFC connection and they are working fine.
Here with I'm attaching part of the log i got for the maintance package error.
Pls help
Maintenance Package completed
> Maximum number of retries reached ( 0003 )
Updating license data completed from destination SM_SOMCLNT100_BACK [Maintenance Package]
Error updating license data from destination SM_SOMCLNT100_BACK [Maintenance Package]
Retrieval of license data failed from destination SM_SOMCLNT100_BACK
> ( AGS_MK_GET_MAINT_KEYS )
> Function module for retrieval of license data not available on Solution Manager
Updating license data started from destination SM_SOMCLNT100_BACK [Maintenance Package]
Error refreshing service definitions from destination SM_SOMCLNT100_BACK
> Password logon no longer possible - too many failed attempts
> error reading function module interface BDL_DO_SESSION_REFRESH_NEW from SM_SOMCLNT100_BACK
> Re-entry after error
Refresh of service definitions started from destination SM_SOMCLNT100_BACK [Maintenance Package]
Refresh sessions from destination SM_SOMCLNT100_BACK finished [Maintenance Package]
> Sessions cannot be refreshed from destination SM_SOMCLNT100_BACK ( SOM , 0020312095 )
> Password logon no longer possible - too many failed attempts
> error reading function module interface DSWP_API_SESSIONLIST_GET from SM_SOMCLNT100_BACK
Refresh sessions from destination SM_SOMCLNT100_BACK started [Maintenance Package]
Refresh sessions from destination SDCC_OSS finished [Maintenance Package]
> Sessions are up to date
Refresh sessions from destination SDCC_OSS started [Maintenance Package]
> Not due, due every 7 day(s), last successful run 10.07.2011 21:20:24
Delete old session and log data :
Maintenance Package started
Thanks,
Shanahas

Business Objects 3.1 reports are not working with IE 10.

Hi,
Recently I upgraded my internet explorer to IE10.. Since then business objects 3.1 reports are not opening in IE10.0
Getting error message "webpage can't be found".
I am not sure whether BO 3.1 reports work with IE 10.0 or not.
Please advise
Thanks
Sat

Did you try with other browsers ?
IE 10 (Compatibility View display mode) with Oracle Java 6 / Oracle Java 7 is supported for BOXI3.1 SP6.
Please check the PAM for details of your SP level.

Reports are not posting with report repository webserver configured for Sin

Hi Everyone,
We have configured Single Signon on our Test environment (UADB1) using Sun Authentication Manager. Everything went well, we can login using our LDAP accounts except for one thing. The reports are not posting to the report repository.
Our setup goes like this. We have used only one webserver for login and for report repository purposes. SSL certificate was configured in the webserver and we are using https in the report node. Both URLs https://dv001.test.com:8450 and http://dv001.test.com:8400 were configured for Single Signon.
Report Node Definition
Node Name: uadb1
URL: https://dv001.test.com:8450/psreports/uadb1
Connection Information
https
URI Port: 8450
URI Host: dv001.test.com
URI Resource: SchedulerTransfer/uadb1
Below is the error I am getting. If I will use another webserver which is not the Single Signon configured as report repository the reports are posting. So, I am thinking this has something to do with the Single Signon setup and SSL. ANy idea? Thanks.
PSDSTSRV.2093190 (10) [06/13/10 01:05:43 PostReport](3) 1. Process Instance: 9499/Report Id: 8465/Descr: Process Scheduler System Purge
PSDSTSRV.2093190 (10) [06/13/10 01:05:43 PostReport](3) from directory: /psft/pt849/appserv/prcs/UADB1/log_output/AE_PRCSYSPURGE_9499
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) (JNIUTIL): Java exception thrown: java.net.SocketException: Unexpected end of file from server
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](3) HTTP transfer error.
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](3) Post Report Elapsed Time: 0.2300
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) =================================Error===============================
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) Unable to post report/log file for Process Instance: 9499, Report Id: 8465
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Process Name: PRCSYSPURGE, Type: Application Engine
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Description: Process Scheduler System Purge
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Directory: /psft/pt849/appserv/prcs/UADB1/log_output/AE_PRCSYSPURGE_94

Duplicated thread : Reports not posting if using Single Signon webserver as report repo
Nicolas.

What causes "report could not be opened for writing . . ." message

"This report could not be opened for writing. Any changes must be saved to a new file." The version is CR 2013 SP1. Win 7 Pro. I'm new to CR and can't figure out why I get this error. I've verified all Windows permissions. It's an SAP error message - not a Windows message. Thanks in advance.
rd

Hi Rd,
Per SAP Note 1911880, this has been identified as a Bug in CR 2011. Since CR 2013 is just a rebranded version of the same tool, the SAP Note should apply to CR 2013 as well.
For CR 2013, the issue has been resolved in FP3. I would suggest you to upgrade to the highest available version for CR 2013 and see if it works.
Another workaround could be to right-click the CR Designer exe > Run as Administrator > Log-in with Admin credentials > try opening the report.
-Abhilash

Expense reports are not processing for future date?

hi folks,
in our co.expense reports are not processing for future date, even though the end date is one month from now the expense reports are not getting paid.
can anybody assist me to come out of this issue.
thanks in advance,
regards
bhanu

HI,
Could you please share how to go Debug mode in Dymanic program, I have scenarion in SAP HR , when Employee is hire , during the hiring action Infotype 32 is updating based on following conditions
********INSERT IT0032 FOR CANDIDATE ID *************
P0001-PERSG<>'5' - True
P0000-MASSN='01'/X
P0000-MASSN='H1'/X
P0000-MASSN<>'84'/X
P0000-MASSN<>'86'/X
P0000-MASSN<>'99'/X
GET_PNALT(ZHR_CREATEP0032)
RP50D-FIELDS <> ''
INS,0032,,,(P0000-BEGDA),(P0000-ENDDA)/D
P0032-PNALT=RP50D-FIELD1
P0032-ZZ_COMPID='05' _ True
Infotype record is being created but there is no data in "RP50D-FIELD1 , so i tried to debug the subroutine GET_PNALT(ZHR_CREATEP0032) as mention in Dynamic action, its not going in debugger mode.
Do you have any Idea about how to debug the program. used in dynamic action
Regards,
Madhu

I am trying to download photos from my camera to iphoto on my mac book (which I have done many times before). This time I am getting an alert that saysThe photo "IMG_5965.JPG" could not be opened, because the original item cannot be found. Help?

I am trying to download photos from my camera to iphoto on my mac book (which I have done many times before). This time I am getting an alert that saysThe photo “IMG_5965.JPG” could not be opened, because the original item cannot be found. How can I fix this?

There is a fair likelihood of an explanation of this symptom
in another ASC discussion thread; see the reply by léonie:
https://discussions.apple.com/message/20165563#20165563
You may have to research any newer possibilities in trouble-
shooting or resolving issues by use of iPhoto Support page.
Since I don't use iPhoto as a primary editor or storage, the
details on the topic aren't so good. I prefer ToyViewer editor.
•iPhoto Support
•iPhoto Video Tutorials
Hopefully the error is easily corrected.
Good luck & happy computing!

My old emails and documents are not showing up in email or finder both from the same date and I cannot find them anywhere. I do not believe I have any archive settings on. Any idea how I get them to show up?

my old emails and documents are not showing up in email or finder both from the same date and I cannot find them anywhere. I do not believe I have any archive settings on. Any idea how I get them to show up?

Hello gpbondi,
The following article provdies step-by-step instructions for downloading your purchases both in iTunes and on your devices.
Download past purchases
http://support.apple.com/kb/HT2519
Cheers,
Allen

My itunes app was working fine then all of a sudden I'm getting an error - The Itunes application could not be opened. The required folder cannot be found. But it doesn't tell me what folder.

I am using Windows Vista. My itunes launched fine until now. Now I get an error - "The Itunes application could not be opened. The required folder cannot be found". I have no idea what file it is looking for. Has anyone seen this error?
I have also tried to uninstall the package and I get the error Could not access network location %APPDATA%\. And it won't uninstall. I don't know why it's complaining in both cases.
Itunes was working 3 weeks ago with no problem.
HELP!!!

hey did u ever get you itunes fixed?

I can't open my itunes application, keep getting message - the itunes application could not be opened, an unexpected error occurred (13010) Please help

I can't open my itunes application, keep getting message - the itunes application could not be opened, an unexpected error occurred (13010) Please help

Try removing the Genius database. In the "Finder" go to the /username/Music/iTunes/ folder and delete the "iTunes Library Genius.itdb" file. This may allow the program to launch again. This file will be recreated upon first use of the "Genius" feature.

Iphoto wont open,keep getting Alert:The photo IMG_3515.jpg could not be opened,because the original item cannot be found. It opened fine two days ago. Any suggestions? iPhoto 9.3.2

iphoto wont open,keep getting Alert:The photo IMG_3515.jpg could not be opened,because the original item cannot be found. It opened fine two days ago. Any suggestions? iPhoto 9.3.2

No changes were made. I saw in one of the threads where someone said to repair the database(which didn't work) or Rebuild the database(which did work). Thanks to one all for the support.
WP

Reports are not called from form in browser plz help

Hi,
I have installed 9iAS+8.1.7 database on the same machine with NT4 server.My system's forms(.fmx) are running well but my reports are not running from my main form.i call reports from the
from as,
Run_Product(reports,'..\iReports\xglrxx12.rep',synchronous,RUNTIME,FILESYSTEM,pl_id,null);
Actually want to know the report's setting when calling from the from in a browser(environment variables,virtual paths etc.).
My database is installed in drive E:\8idb_home\ and 9iAS is on
G:\9iAS_home\.My systems .fmx & .rep files are in "iforms" and "ireports" folder respectively.
Plz help!
Many thanks!

Hi,
First of all thanks to Vincent Botteman for solving the prob.
Yes when i changed my call of run_product by excluding the path i have specified when calling from form it then makes a result.
Also specified the entry of your reports .rep files by giving path in reports60_path registery variable as,
Run regedit-->Hkey_Local_Machine-->Software-->Oracle here give the full path of your .rep files as an first entry in reports60_path variable.And finally not mention the path when calling reports from form as,
Run_Product(reports,'xglrxx13.rep',synchronous,RUNTIME,FILESYSTEM,pl_id,null);<--- Correct way.
Run_Product(reports,'..\iReports\xglrxx13.rep',synchronous,RUNTIME,FILESYSTEM,pl_id,null);<--- Wrong way.
Regards!

Reports are not able to run coz of Block Corruption

Hi all,
I have reported some Oracle finance reports are not running.
Once i got the call i looked into the user trace file, there i found the below :
Corrupt block dba: 0x2100f345 file=33. blocknum=62277. found during buffer read
on disk type:0. ver:0. dba: 0x00000000 inc:0x00000000 seq:0x00000000 incseq:0x00000000
Entire contents of block is zero - block never written
Reread of block=2100f345 file=33. blocknum=62277. found same corupted data
table scan: segment: file# 15 block# 84
skipping corrupt block file# 33 block# 62277
Corrupt block dba: 0x2100f346 file=33. blocknum=62278. found during buffer read
on disk type:0. ver:0. dba: 0x00000000 inc:0x00000000 seq:0x00000000 incseq:0x00000000
Entire contents of block is zero - block never written
Reread of block=2100f346 file=33. blocknum=62278. found same corupted data
table scan: segment: file# 15 block# 84
skipping corrupt block file# 33 block# 62278
Then i try to find out which table is affected by the below queary :
SQL> select segment_type,owner,segment_name from dba_extents where file_id=33 and 62278 between block_id and block_idblocks -1;+
SEGMENT_TYPE      OWNER
SEGMENT_NAME
TABLE             GL
GL_JE_LINES
So this above table GL_JE_LINES is the affected table is init.
Now what is the action i have to take. In this database there is no archive log enabled and version of this database is 7.
Can any one sugges me what is the action i have to take now.
Regards
Hamid

DB version :
SQL> select * from v$version;
BANNER
Oracle7 Server Release 7.3.4.3.0 - Production
PL/SQL Release 2.3.4.3.0 - Production
CORE Version 3.5.4.0.0 - Production
TNS for IBM/AIX RISC System/6000: Version 2.3.4.0.0 - Production
NLSRTL Version 3.2.4.0.0 - Production
Alert log :
SID>tail -f alert_SID.log
Tue Sep 25 14:35:03 2012
Errors in file /u20/app/oracle/admin/APRD/udump/ora_84426_aprd.trc:
Tue Sep 25 14:35:03 2012
Errors in file /u20/app/oracle/admin/APRD/udump/ora_84426_aprd.trc:
Tue Sep 25 14:35:03 2012
Errors in file /u20/app/oracle/admin/APRD/udump/ora_84426_aprd.trc:
Tue Sep 25 15:09:18 2012
create tablespace tbs datafile '/stage/software/APRD/oradata/tbsnew.dbf' size 10                                                                             0m
Tue Sep 25 15:09:27 2012
Completed: create tablespace tbs datafile '/stage/software/AP...
Trace file :
SID>tail -f ora_84426_aprd.trc
on disk type:0. ver:0. dba: 0x00000000 inc:0x00000000 seq:0x00000000 incseq:0x00000000
Entire contents of block is zero - block never written
Reread of block=2101d366 file=33. blocknum=119654. found same corupted data
table scan: segment: file# 15 block# 84
skipping corrupt block file# 33 block# 119654
Corrupt block dba: 0x2101d367 file=33. blocknum=119655. found during buffer read
on disk type:0. ver:0. dba: 0x00000000 inc:0x00000000 seq:0x00000000 incseq:0x00000000
Entire contents of block is zero - block never written
Reread of block=2101d367 file=33. blocknum=119655. found same corupted
For this above :
SQL> select segment_type,owner,segment_name from dba_extents where file_id=33 and 119654 between block_id and block_id+blocks -1;
SEGMENT_TYPE      OWNER
SEGMENT_NAME
TABLE             GL
GL_JE_LINES
Regards
Hamid

Lync monitoring Details reports are not getting opened, Getting SQL error like "Cannot impersonate user for data source 'CDRDB"

Similar Messages

Maybe you are looking for