Lync on Mac 10.8 fails to join meetings
Hello all,
I'm facing an issue since upgrading from OS X 10.6 to 10.8 that the Lync client 14.0.2 frequently fails to join meetings. If I retry enough times, usually I'm able to finally join. I rely on Lync meetings multiple times every day so this is a big issue for
me. Here's the error message I get:
"Unable to connect. Try connecting to the online meeting by using the web browser that is currently open."
Any ideas?
Thank you,
Evan
Thanks Rusty. It bothers me that this problem has existed for so long now.
If you all are not aware there is a fully functioning "workaround." Using lync, call into the meeting as if you were calling from into a regular concall, then put in the meeting pin. As soon as it realizes you are on lync the
meeting will be setup and it works fully, but it is really annoying to have to do each time.
I did install 14.0.4 as well today, no immediate change in behavior for me. Tried changing to external only manual sip/tls and it seems to be working in terms of creating meetings, but only if no others have joined at the time I create it. Joining
existing meetings does not work, like before you connect to the meeting, but the phone shows as a * (unconnected or issue I believe) and sharing sessions will not reliably start. After a minute, lync will show a random person from the meeting as calling
you. Answering does not join you to the conference.
So Microsoft still has some work to do to resolve this issue.
As for the rest with the keychain issues. Yep, the assigned one is expired from the outset. I went to a 10.7 system and checked, it was also set as expired there, so I'm not sure it matters but who knows. I've also tried allowing all certs
etc many times, but behavior was unreliable at best. The workaround above is the only thing that always works.
Similar Messages
-
Hi All,
Having an issue logging into my Office 365 Lync service. I have on-site exchange and I'm a bit confused about how to proceed in terms of what goes where:
Email Address: [email protected]
Office 365 Address: [email protected]
Now, on the PC I've just punched in my Office 365 address and password and it's worked fine, however Lync for Mac asks for both an email address an User ID. Using Lyn 14.0.7 on OS X Mavericks.
Any help on getting me logged in would be much appreciated!According to this situation, your account status and the Lync Online service should be fine. Based on my experience, this issue might be related to the Lync client or the environment of the machine.
To narrow down the cause, would you mind performing some steps to see if the issue persists? Please see the following:
1. Try to sign in to Lync by using an incorrect sign-in address which you know won’t work. For example, \EmailAddress @contoso.com. After the sign-in fails, please use the correct sign-in address.
2. Clear cached data
First, delete the following folders:
Users/Home Folder/Library/Caches/com.microsoft.Lync
Users/Home Folder/Documents/Microsoft User Data/Microsoft Lync History
3. If the certificates for Lync is corrupted, please delete it. To do this, follow these steps:
a. Open the Keychain Access certificate management utility. To do this, in Finder, click
Applications, click Utilities, and then click
Keychain Access. Or, search for Keychain Access by using Spotlight.
b. In the left pane, click login, and then click
Certificates.
c. In the right pane, find a certificate that's named
Unknown or Communications Server, select it, and then delete it.
Note You may have to unlock your keychain by using your password.
d. Close Keychain Access.
e. Restart Lync for Mac.
Also you can refer below link
http://community.office365.com/en-us/forums/166/t/212064.aspx
Please remember, if you see a post that helped you please click (Vote As Helpful" and if it answered your question, please click (Mark As Answer). -
Lync for Mac 14.0.10 (141024) not working with latest OS X Yosemite
Hi -- I am having issues logging in to Lync.
I recently installed OS X Yosemite 10.10.1 and installed Lync for Mac 14.0.10 (141024) and I have not been able to log in to Lync. When I try to sign in, I get the error message "Sign in to Microsoft Lync failed because the service is not available
or you may not be connected to the internet." I get this error message even though I am logged in to my company's network/internet.
Is anyone else having this problem and is there a solution?
Thanks!Yes! I've been wrestling with this problem all day! I've tried manually setting the server names, removing stored credentials, removing keychain entries, and finally clean uninstall/reinstall. No luck.
This line comes up a lot in my logs.
12/15/2014|15:02:46.771 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
Here's the majority of the errors from my log, trimmed down to fit into this post.
12/15/2014|14:58:44.678 185:A0B271D4 ERROR :: RtcGetPlatform(): 10.10
12/15/2014|14:58:44.678 185:A0B271D4 ERROR :: Failed to init PANOVideo[79B351F0], 80070002
12/15/2014|14:58:45.435 185:A0B271D4 ERROR :: No device Id to load PANOVIDEO
12/15/2014|14:58:45.435 185:A0B271D4 ERROR :: HRESULT failed: 80ee002d = hr . get_AudioSinkDevices
12/15/2014|14:58:45.435 185:A0B271D4 ERROR :: HRESULT failed: 80ee002d = hr . LoadDevices
12/15/2014|14:58:45.435 185:A0B271D4 ERROR :: virtual HRESULT CRTCMediaController::LoadDeviceSettings() Failed while loading device- 3 with 80ee002d.
12/15/2014|14:58:45.447 185:A0B271D4 ERROR :: HRESULT API failed: 80000008 = hr. ParsePidVid
12/15/2014|14:58:45.447 185:A0B271D4 ERROR :: HRESULT API failed: 80000008 = hr. ParsePidVid
12/15/2014|14:58:45.447 185:A0B271D4 ERROR :: HRESULT API failed: 80000008 = hr. ParsePidVid
12/15/2014|14:58:45.448 185:A0B271D4 ERROR :: HRESULT API failed: 80070005 = hr. Panoramic device registry key couldn't be read
12/15/2014|14:58:45.448 185:A0B271D4 ERROR :: HRESULT API failed: 80070005 = hr. Panoramic device registry key couldn't be read
12/15/2014|14:58:45.458 185:A0B271D4 ERROR :: LoadCustomTelephonyDeviceCollection: HRESULT failed: 80070002 = hr. Audio capture
12/15/2014|14:58:45.458 185:A0B271D4 ERROR :: LoadCustomTelephonyDeviceCollection: HRESULT failed: 80070002 = hr. Audio capture
12/15/2014|14:58:45.460 185:A0B271D4 ERROR :: HRESULT API failed: 80070005 = hr. Panoramic device registry key couldn't be read
12/15/2014|14:58:45.461 185:A0B271D4 ERROR :: Unable to register the event source for Lync - make sure event log source reg keys are in place and the resource dll is available
12/15/2014|14:58:45.461 185:A0B271D4 ERROR :: HRESULT SipStackGlobalInit() - Failed registering the event log source: 2
12/15/2014|14:58:45.472 185:A0B271D4 ERROR :: HRESULT SIP_STACK::RegisterIPAddrChangeNotification() - WSAIoctl did not return WSAEWOULDBLOCK as expected
12/15/2014|14:58:45.472 185:A0B271D4 ERROR :: void SIP_STACK::InitPlatformAuthCaps() - EnumerateSecurityPackages failed 0x80000001
12/15/2014|14:58:45.497 185:A0B271D4 ERROR :: SetTimeoutOptions: "Internet set timeout option: 2. Ignore any error. hr=80070057"
12/15/2014|14:58:45.497 185:A0B271D4 ERROR :: SetTimeoutOptions: "Internet set timeout option: 6. Ignore any error. hr=80070057"
12/15/2014|14:58:45.497 185:A0B271D4 ERROR :: SetTimeoutOptions: "Internet set timeout option: 5. Ignore any error. hr=80070057"
12/15/2014|14:58:45.535 185:A0B271D4 ERROR :: AddManagedCredential: "Cred type 1 has 1 credentials"
12/15/2014|14:58:45.535 185:A0B271D4 ERROR :: AddManagedCredential: "Cred type 6 has 1 credentials"
12/15/2014|14:58:45.768 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
12/15/2014|14:58:46.308 185:A0B271D4 ERROR :: HRESULT API failed: 80070005 = hr. Panoramic device registry key couldn't be read
12/15/2014|14:58:46.309 185:A0B271D4 ERROR :: HRESULT API failed: 80070005 = hr. Panoramic device registry key couldn't be read
12/15/2014|14:58:46.309 185:A0B271D4 ERROR :: OnActiveAudioDeviceChange: "Error: hr = 80000003"
12/15/2014|15:00:07.918 185:A0B271D4 ERROR :: AddManagedCredential: "Cred type 2 has 1 credentials"
12/15/2014|15:00:08.008 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
12/15/2014|15:00:08.068 185:A0B271D4 ERROR :: CreatePublication: "Unexpected function call. component state is 8."
12/15/2014|15:00:08.069 185:A0B271D4 ERROR :: EndBatchWrite: "CreatePublication failed. hr=80ee0061"
12/15/2014|15:00:08.071 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
12/15/2014|15:00:08.111 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:certificate:OCS:1 from credman: hr=0x80000001"
12/15/2014|15:00:08.176 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:certificate:EWS:1 from credman: hr=0x80000001"
12/15/2014|15:00:08.183 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:00:08.183 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:OCS:1 from credman: hr=0x80070057"
12/15/2014|15:00:08.189 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:00:08.189 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:GAL:1 from credman: hr=0x80070057"
12/15/2014|15:00:08.194 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:00:08.194 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:DLX:1 from credman: hr=0x80070057"
12/15/2014|15:00:08.199 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:00:08.199 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:EWS:1 from credman: hr=0x80070057"
12/15/2014|15:00:08.204 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:00:08.204 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:AUS:1 from credman: hr=0x80070057"
12/15/2014|15:00:08.209 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:00:08.209 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:AUB:1 from credman: hr=0x80070057"
12/15/2014|15:00:08.214 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:00:08.214 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:ABS:1 from credman: hr=0x80070057"
12/15/2014|15:00:08.219 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:00:08.219 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:SPM:1 from credman: hr=0x80070057"
12/15/2014|15:00:08.224 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:00:08.225 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:CER:1 from credman: hr=0x80070057"
12/15/2014|15:00:08.229 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:00:08.230 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:LOC:1 from credman: hr=0x80070057"
12/15/2014|15:00:08.234 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:00:08.235 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:RGS:1 from credman: hr=0x80070057"
12/15/2014|15:00:08.240 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:00:08.240 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:ANO:1 from credman: hr=0x80070057"
12/15/2014|15:00:08.245 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:00:08.245 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:BDM:1 from credman: hr=0x80070057"
12/15/2014|15:00:08.251 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:00:08.251 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:PHO:1 from credman: hr=0x80070057"
12/15/2014|15:00:08.257 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:00:08.257 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:proxy:PRX:1 from credman: hr=0x80070057"
12/15/2014|15:00:08.262 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:00:08.262 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:[email protected]:anonymous:ANO:1 from credman: hr=0x80070057"
12/15/2014|15:00:08.262 185:A0B271D4 ERROR :: StartComponent: "Failed to reload credentials from credman: hr=0x80070057"
12/15/2014|15:00:08.277 185:A0B271D4 ERROR :: Initialize: "Error: returning hr = 80040154 - "
12/15/2014|15:00:08.448 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
12/15/2014|15:00:08.681 185:A0B271D4 ERROR :: Unable to event log - make sure event log source reg keys are in place and the resource dll is available
12/15/2014|15:00:08.736 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
12/15/2014|15:00:08.776 185:A0B271D4 ERROR :: HRESULT failed: 80000008 = hr . Wrong format
12/15/2014|15:00:23.871 185:A0B271D4 ERROR :: HRESULT API failed: 80ee0061 = hr. DisableSubscriptionManager
12/15/2014|15:00:23.878 185:A0B271D4 ERROR :: HRESULT API failed: 80ee0061 = hr. DisablePublicationManager
12/15/2014|15:00:23.878 185:A0B271D4 ERROR :: HRESULT API failed: 80ee0061 = hr. DisableUserSearchManager
12/15/2014|15:00:23.878 185:A0B271D4 ERROR :: HRESULT API failed: 80ee0061 = hr. failed to disable the endpoint
12/15/2014|15:00:23.884 185:A0B271D4 ERROR :: DWORD SIP_MSG_PROCESSOR::GetLocalConnectionAddrSubnet() get subnetmask failed
12/15/2014|15:00:23.956 185:A0B271D4 ERROR :: CreatePublication: "Unexpected function call. component state is 8."
12/15/2014|15:00:23.956 185:A0B271D4 ERROR :: EndBatchWrite: "CreatePublication failed. hr=80ee0061"
12/15/2014|15:00:23.957 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=2, hr=80ee0061"
12/15/2014|15:00:23.957 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=3, hr=80ee0061"
12/15/2014|15:00:23.957 185:A0B271D4 ERROR :: ~CManagedCredential: "type=2, domainAndUser=erobr, passwordAvail=1, cert=00000000, userCert=0"
12/15/2014|15:00:23.957 185:A0B271D4 ERROR :: ~CManagedCredential: "type=6, domainAndUser=, passwordAvail=0, cert=00000000, userCert=0"
12/15/2014|15:00:23.957 185:A0B271D4 ERROR :: AddManagedCredential: "Cred type 6 has 1 credentials"
12/15/2014|15:00:25.116 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
12/15/2014|15:00:25.126 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
12/15/2014|15:00:26.963 185:A0B271D4 ERROR :: virtual void SIP_MSG_PROCESSOR::OnConnectComplete(HRESULT, BOOL) connect failed 80072743 retry connecting via HTTP tunnel
12/15/2014|15:00:26.964 185:A0B271D4 ERROR :: virtual void SIP_MSG_PROCESSOR::OnConnectComplete(HRESULT, BOOL) UseHttpProxy failed
12/15/2014|15:00:26.964 185:A0B271D4 ERROR :: Releasing connection and notifying transactions
12/15/2014|15:00:26.964 185:A0B271D4 ERROR :: void SIP_MSG_PROCESSOR::NotifyRequestConnectionConnectComplete(HRESULT) - Error: 80072743
12/15/2014|15:00:28.983 185:A0B271D4 ERROR :: virtual void OUTGOING_TRANSACTION::OnRequestConnectionConnectComplete(HRESULT) - connection failed error 80072743
12/15/2014|15:00:29.023 185:A0B271D4 ERROR :: HRESULT API failed: 80ee0061 = hr. DisableServManager
12/15/2014|15:00:29.023 185:A0B271D4 ERROR :: virtual void OUTGOING_TRANSACTION::OnRequestConnectionConnectComplete(HRESULT) - connection failed error 80072743
12/15/2014|15:02:46.771 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
12/15/2014|15:02:46.775 185:A0B271D4 ERROR :: CreatePublication: "Unexpected function call. component state is 8."
12/15/2014|15:02:46.775 185:A0B271D4 ERROR :: EndBatchWrite: "CreatePublication failed. hr=80ee0061"
12/15/2014|15:02:46.775 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
12/15/2014|15:02:47.845 185:A0B271D4 ERROR :: AddManagedCredential: "Cred type 2 has 1 credentials"
12/15/2014|15:02:47.845 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
12/15/2014|15:02:47.846 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
12/15/2014|15:02:47.867 185:A0B271D4 ERROR :: CreatePublication: "Unexpected function call. component state is 8."
12/15/2014|15:02:47.867 185:A0B271D4 ERROR :: EndBatchWrite: "CreatePublication failed. hr=80ee0061"
12/15/2014|15:02:47.868 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
12/15/2014|15:02:47.868 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
12/15/2014|15:02:47.870 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:certificate:OCS:1 from credman: hr=0x80000001"
12/15/2014|15:02:47.871 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:certificate:EWS:1 from credman: hr=0x80000001"
12/15/2014|15:02:47.872 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:02:47.872 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:OCS:1 from credman: hr=0x80070057"
12/15/2014|15:02:47.872 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:02:47.872 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:GAL:1 from credman: hr=0x80070057"
12/15/2014|15:02:47.872 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:02:47.872 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:DLX:1 from credman: hr=0x80070057"
12/15/2014|15:02:47.872 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:02:47.872 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:EWS:1 from credman: hr=0x80070057"
12/15/2014|15:02:47.873 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:02:47.873 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:AUS:1 from credman: hr=0x80070057"
12/15/2014|15:02:47.873 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:02:47.873 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:AUB:1 from credman: hr=0x80070057"
12/15/2014|15:02:47.873 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:02:47.873 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:ABS:1 from credman: hr=0x80070057"
12/15/2014|15:02:47.874 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:02:47.874 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:SPM:1 from credman: hr=0x80070057"
12/15/2014|15:02:47.874 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:02:47.874 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:CER:1 from credman: hr=0x80070057"
12/15/2014|15:02:47.874 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:02:47.874 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:LOC:1 from credman: hr=0x80070057"
12/15/2014|15:02:47.874 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:02:47.874 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:RGS:1 from credman: hr=0x80070057"
12/15/2014|15:02:47.875 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:02:47.875 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:ANO:1 from credman: hr=0x80070057"
12/15/2014|15:02:47.875 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:02:47.875 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:BDM:1 from credman: hr=0x80070057"
12/15/2014|15:02:47.875 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:02:47.875 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:PHO:1 from credman: hr=0x80070057"
12/15/2014|15:02:47.875 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:02:47.876 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:proxy:PRX:1 from credman: hr=0x80070057"
12/15/2014|15:02:47.876 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:02:47.876 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:[email protected]:anonymous:ANO:1 from credman: hr=0x80070057"
12/15/2014|15:02:47.876 185:A0B271D4 ERROR :: StartComponent: "Failed to reload credentials from credman: hr=0x80070057"
12/15/2014|15:02:47.876 185:A0B271D4 ERROR :: Initialize: "Error: returning hr = 80040154 - "
12/15/2014|15:02:47.915 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
12/15/2014|15:02:47.915 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
12/1
12/15/2014|15:02:47.924 185:A0B271D4 ERROR :: Unable to event log - make sure event log source reg keys are in place and the resource dll is available
12/15/2014|15:02:47.942 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
12/15/2014|15:02:47.942 185:A0B271D4 ERROR :: HRESULT failed: 80000008 = hr . Wrong format
12/15/2014|15:02:48.237 185:A0B271D4 ERROR :: static HRESULT SIP_MESSAGE::ParseStatusLine(const CHAR*, SIZE_T, SIZE_T*, SIP_MESSAGE*) ParseSipVersion failed 80000008
12/15/2014|15:02:48.237 185:A0B271D4 ERROR :: ParseStartLine failed hr: 80000008
12/15/2014|15:02:48.237 185:A0B271D4 ERROR :: static HRESULT SIP_MESSAGE::ParseSipMessageIntoHeadersAndBody(CHAR*, SIZE_T, SIZE_T*, BOOL, SIP_MESSAGE*, bool) ParseStartLine failed
12/15/2014|15:02:48.238 185:A0B271D4 ERROR :: HRESULT CSIPMessageCollator::ProcessCollatedData() Parsing collated data into a SIP message failed: 0x80000008
12/15/2014|15:02:48.238 185:A0B271D4 ERROR :: virtual HRESULT CSIPMessageCollator::OnRecv(HRESULT, BYTE*, DWORD) Failed to process the accumulated data.
12/15/2014|15:02:48.238 185:A0B271D4 ERROR :: virtual HRESULT CSIPClientConnection::OnRecv(HRESULT, BYTE*, DWORD) (80000008) this: 7867D738. Setting CSIPClientConnection state to disconnected
12/15/2014|15:02:48.238 185:A0B271D4 ERROR :: void CSIPClientConnection::NotifyError(HRESULT) (80000008) this: 7867D738 - Enter
12/15/2014|15:02:48.238 185:A0B271D4 ERROR :: void SIP_MSG_PROCESSOR::ReleaseRequestConnectionAndNotifyOutgoingTransactions(HRESULT) this: 78AE1408 - Exit
12/15/2014|15:02:48.243 185:A0B271D4 ERROR :: void CSIPClientConnection::NotifyError(HRESULT) this: 7867D738 - Exit
12/15/2014|15:02:48.243 185:A0B271D4 ERROR :: virtual HRESULT CSIPClientConnection::OnDisconnect(HRESULT) (80072746) this: 7867D738
12/15/2014|15:02:48.243 185:A0B271D4 ERROR :: void CSIPClientConnection::NotifyError(HRESULT) (80072746) this: 7867D738 - Enter
12/15/2014|15:02:48.243 185:A0B271D4 ERROR :: void CSIPClientConnection::NotifyError(HRESULT) this: 7867D738 - Exit
12/15/2014|15:02:48.244 185:A0B271D4 ERROR :: virtual void OUTGOING_TRANSACTION::OnConnectionError(HRESULT) - error: 80ee0067
12/15/2014|15:02:50.255 185:A0B271D4 ERROR :: HRESULT API failed: 80ee0061 = hr. DisableServManager
12/15/2014|15:02:50.289 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[133] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
12/15/2014|15:02:50.289 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[133] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
12/15/2014|15:02:50.289 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[133] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
12/15/2014|15:02:50.289 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[102] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
12/15/2014|15:02:50.289 185:A0B271D4 ERROR :: OnEnable: "Logon failed with UCCP status/diag code 0x80ee0067/0"
12/15/2014|15:02:50.290 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
12/15/2014|15:02:50.290 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
12/15/2014|15:02:50.345 185:A0B271D4 ERROR :: SetStatusInfo: "Component LogonSession reports error code 0x80ee0067 (no auto-recovery)"
12/15/2014|15:02:50.347 185:A0B271D4 ERROR :: CreatePublication: "Unexpected function call. component state is 8."
12/15/2014|15:02:50.347 185:A0B271D4 ERROR :: EndBatchWrite: "CreatePublication failed. hr=80ee0061"
12/15/2014|15:02:50.347 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=2, hr=80ee0061"
12/15/2014|15:02:50.347 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=3, hr=80ee0061"
12/15/2014|15:02:50.348 185:A0B271D4 ERROR :: ~CManagedCredential: "type=2, domainAndUser=erobr, passwordAvail=1, cert=00000000, userCert=0"
12/15/2014|15:02:50.348 185:A0B271D4 ERROR :: ~CManagedCredential: "type=6, domainAndUser=, passwordAvail=0, cert=00000000, userCert=0"
12/15/2014|15:02:50.348 185:A0B271D4 ERROR :: AddManagedCredential: "Cred type 6 has 1 credentials"
12/15/2014|15:02:50.349 185:A0B271D4 ERROR :: OnEvent: "Component LogonSession failed during state STOPPED: hr=0x80ee0067, diagCode=0"
12/15/2014|15:02:55.761 185:A0B271D4 ERROR :: AddManagedCredential: "Cred type 2 has 1 credentials"
12/15/2014|15:02:55.761 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
12/15/2014|15:02:55.761 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
12/15/2014|15:02:55.782 185:A0B271D4 ERROR :: CreatePublication: "Unexpected function call. component state is 8."
12/15/2014|15:02:55.782 185:A0B271D4 ERROR :: EndBatchWrite: "CreatePublication failed. hr=80ee0061"
12/15/2014|15:02:55.782 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
12/15/2014|15:02:55.783 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
12/15/2014|15:02:55.785 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:certificate:OCS:1 from credman: hr=0x80000001"
12/15/2014|15:02:55.786 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:certificate:EWS:1 from credman: hr=0x80000001"
12/15/2014|15:02:55.786 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:02:55.786 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:OCS:1 from credman: hr=0x80070057"
12/15/2014|15:02:55.787 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:02:55.787 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:GAL:1 from credman: hr=0x80070057"
12/15/2014|15:02:55.787 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:02:55.787 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:DLX:1 from credman: hr=0x80070057"
12/15/2014|15:02:55.787 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:02:55.787 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:EWS:1 from credman: hr=0x80070057"
12/15/2014|15:02:55.787 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:02:55.787 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:AUS:1 from credman: hr=0x80070057"
12/15/2014|15:02:55.788 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:02:55.788 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:AUB:1 from credman: hr=0x80070057"
12/15/2014|15:02:55.788 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:02:55.788 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:ABS:1 from credman: hr=0x80070057"
12/15/2014|15:02:55.788 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:02:55.788 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:SPM:1 from credman: hr=0x80070057"
12/15/2014|15:02:55.788 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:02:55.789 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:CER:1 from credman: hr=0x80070057"
12/15/2014|15:02:55.789 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:02:55.789 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:LOC:1 from credman: hr=0x80070057"
12/15/2014|15:02:55.789 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:02:55.789 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:RGS:1 from credman: hr=0x80070057"
12/15/2014|15:02:55.789 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:02:55.789 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:ANO:1 from credman: hr=0x80070057"
12/15/2014|15:02:55.790 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:02:55.790 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:BDM:1 from credman: hr=0x80070057"
12/15/2014|15:02:55.790 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:02:55.790 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:PHO:1 from credman: hr=0x80070057"
12/15/2014|15:02:55.790 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:02:55.790 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:proxy:PRX:1 from credman: hr=0x80070057"
12/15/2014|15:02:55.791 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:02:55.791 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:[email protected]:anonymous:ANO:1 from credman: hr=0x80070057"
12/15/2014|15:02:55.791 185:A0B271D4 ERROR :: StartComponent: "Failed to reload credentials from credman: hr=0x80070057"
12/15/2014|15:02:55.791 185:A0B271D4 ERROR :: Initialize: "Error: returning hr = 80040154 - "
12/15/2014|15:02:55.804 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
12/15/2014|15:02:55.812 185:A0B271D4 ERROR :: Unable to event log - make sure event log source reg keys are in place and the resource dll is available
12/15/2014|15:02:55.830 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
12/15/2014|15:02:55.830 185:A0B271D4 ERROR :: HRESULT failed: 80000008 = hr . Wrong format
12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: static HRESULT SIP_MESSAGE::ParseStatusLine(const CHAR*, SIZE_T, SIZE_T*, SIP_MESSAGE*) ParseSipVersion failed 80000008
12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: ParseStartLine failed hr: 80000008
12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: static HRESULT SIP_MESSAGE::ParseSipMessageIntoHeadersAndBody(CHAR*, SIZE_T, SIZE_T*, BOOL, SIP_MESSAGE*, bool) ParseStartLine failed
12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: HRESULT CSIPMessageCollator::ProcessCollatedData() Parsing collated data into a SIP message failed: 0x80000008
12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: virtual HRESULT CSIPMessageCollator::OnRecv(HRESULT, BYTE*, DWORD) Failed to process the accumulated data.
12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: virtual HRESULT CSIPClientConnection::OnRecv(HRESULT, BYTE*, DWORD) (80000008) this: 7C0FBB18. Setting CSIPClientConnection state to disconnected
12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: void CSIPClientConnection::NotifyError(HRESULT) (80000008) this: 7C0FBB18 - Enter
12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: void SIP_MSG_PROCESSOR::ReleaseRequestConnectionAndNotifyOutgoingTransactions(HRESULT) this: 7A529008 - Exit
12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: void CSIPClientConnection::NotifyError(HRESULT) this: 7C0FBB18 - Exit
12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: virtual HRESULT CSIPClientConnection::OnDisconnect(HRESULT) (80072746) this: 7C0FBB18
12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: void CSIPClientConnection::NotifyError(HRESULT) (80072746) this: 7C0FBB18 - Enter
12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: void CSIPClientConnection::NotifyError(HRESULT) this: 7C0FBB18 - Exit
12/15/2014|15:02:56.053 185:A0B271D4 ERROR :: virtual void OUTGOING_TRANSACTION::OnConnectionError(HRESULT) - error: 80ee0067
12/15/2014|15:02:58.072 185:A0B271D4 ERROR :: HRESULT API failed: 80ee0061 = hr. DisableServManager
12/15/2014|15:02:58.072 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[133] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
12/15/2014|15:02:58.072 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[133] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
12/15/2014|15:02:58.072 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[133] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
12/15/2014|15:02:58.072 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[102] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
12/15/2014|15:02:58.072 185:A0B271D4 ERROR :: OnEnable: "Logon failed with UCCP status/diag code 0x80ee0067/0"
12/15/2014|15:02:58.073 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
12/15/2014|15:02:58.079 185:A0B271D4 ERROR :: SetStatusInfo: "Component LogonSession reports error code 0x80ee0067 (no auto-recovery)"
12/15/2014|15:02:58.081 185:A0B271D4 ERROR :: CreatePublication: "Unexpected function call. component state is 8."
12/15/2014|15:02:58.081 185:A0B271D4 ERROR :: EndBatchWrite: "CreatePublication failed. hr=80ee0061"
12/15/2014|15:02:58.081 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=2, hr=80ee0061"
12/15/2014|15:02:58.081 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=3, hr=80ee0061"
12/15/2014|15:02:58.081 185:A0B271D4 ERROR :: ~CManagedCredential: "type=2, domainAndUser=DOMAIN_NAME_REMOVED\USER_NAME_REMOVED, passwordAvail=1, cert=00000000, userCert=0"
12/15/2014|15:02:58.081 185:A0B271D4 ERROR :: ~CManagedCredential: "type=6, domainAndUser=, passwordAvail=0, cert=00000000, userCert=0"
12/15/2014|15:02:58.081 185:A0B271D4 ERROR :: AddManagedCredential: "Cred type 6 has 1 credentials"
12/15/2014|15:02:58.082 185:A0B271D4 ERROR :: OnEvent: "Component LogonSession failed during state STOPPED: hr=0x80ee0067, diagCode=0"
12/15/2014|15:02:59.921 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
12/15/2014|15:03:06.314 185:A0B271D4 ERROR :: CreatePublication: "Unexpected function call. component state is 8."
12/15/2014|15:03:06.314 185:A0B271D4 ERROR :: EndBatchWrite: "CreatePublication failed. hr=80ee0061"
12/15/2014|15:03:06.315 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
12/15/2014|15:03:07.574 185:A0B271D4 ERROR :: AddManagedCredential: "Cred type 2 has 1 credentials"
12/15/2014|15:03:07.574 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
12/15/2014|15:03:07.597 185:A0B271D4 ERROR :: CreatePublication: "Unexpected function call. component state is 8."
12/15/2014|15:03:07.597 185:A0B271D4 ERROR :: EndBatchWrite: "CreatePublication failed. hr=80ee0061"
12/15/2014|15:03:07.597 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
12/15/2014|15:03:07.600 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:certificate:OCS:1 from credman: hr=0x80000001"
12/15/2014|15:03:07.601 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:certificate:EWS:1 from credman: hr=0x80000001"
12/15/2014|15:03:07.601 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:03:07.601 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:OCS:1 from credman: hr=0x80070057"
12/15/2014|15:03:07.601 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:03:07.601 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:GAL:1 from credman: hr=0x80070057"
12/15/2014|15:03:07.601 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:03:07.602 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:DLX:1 from credman: hr=0x80070057"
12/15/2014|15:03:07.602 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:03:07.602 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:EWS:1 from credman: hr=0x80070057"
12/15/2014|15:03:07.602 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:03:07.602 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:AUS:1 from credman: hr=0x80070057"
12/15/2014|15:03:07.602 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:03:07.602 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:AUB:1 from credman: hr=0x80070057"
12/15/2014|15:03:07.603 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:03:07.603 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:ABS:1 from credman: hr=0x80070057"
12/15/2014|15:03:07.603 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:03:07.603 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:SPM:1 from credman: hr=0x80070057"
12/15/2014|15:03:07.603 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:03:07.603 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:CER:1 from credman: hr=0x80070057"
12/15/2014|15:03:07.603 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:03:07.603 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:LOC:1 from credman: hr=0x80070057"
12/15/2014|15:03:07.604 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:03:07.604 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:RGS:1 from credman: hr=0x80070057"
12/15/2014|15:03:07.604 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:03:07.604 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:ANO:1 from credman: hr=0x80070057"
12/15/2014|15:03:07.604 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:03:07.604 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:BDM:1 from credman: hr=0x80070057"
12/15/2014|15:03:07.605 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:03:07.605 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:specific:PHO:1 from credman: hr=0x80070057"
12/15/2014|15:03:07.605 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:03:07.605 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:uri=EMAIL_ADDRESS_REMOVED:proxy:PRX:1 from credman: hr=0x80070057"
12/15/2014|15:03:07.605 185:A0B271D4 ERROR :: ReadCredential: "Failed to read cred: hr=0x80070057"
12/15/2014|15:03:07.605 185:A0B271D4 ERROR :: LoadOneCredential: "Failed to read Microsoft_OC1:[email protected]:anonymous:ANO:1 from credman: hr=0x80070057"
12/15/2014|15:03:07.605 185:A0B271D4 ERROR :: StartComponent: "Failed to reload credentials from credman: hr=0x80070057"
12/15/2014|15:03:07.606 185:A0B271D4 ERROR :: Initialize: "Error: returning hr = 80040154 - "
12/15/2014|15:03:07.618 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=5, hr=80ee0061"
12/15/2014|15:03:07.625 185:A0B271D4 ERROR :: Unable to event log - make sure event log source reg keys are in place and the resource dll is available
12/15/2014|15:03:07.644 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
12/15/2014|15:03:07.644 185:A0B271D4 ERROR :: HRESULT failed: 80000008 = hr . Wrong format
12/15/2014|15:08:07.004 185:A0B271D4 ERROR :: virtual void SIP_MSG_PROCESSOR::OnConnectComplete(HRESULT, BOOL) connect failed 80072743 retry connecting via HTTP tunnel
12/15/2014|15:08:07.004 185:A0B271D4 ERROR :: virtual void SIP_MSG_PROCESSOR::OnConnectComplete(HRESULT, BOOL) UseHttpProxy failed
12/15/2014|15:08:07.004 185:A0B271D4 ERROR :: Releasing connection and notifying transactions
12/15/2014|15:08:07.004 185:A0B271D4 ERROR :: void SIP_MSG_PROCESSOR::NotifyRequestConnectionConnectComplete(HRESULT) - Error: 80072743
12/15/2014|15:08:09.024 185:A0B271D4 ERROR :: virtual void OUTGOING_TRANSACTION::OnRequestConnectionConnectComplete(HRESULT) - connection failed error 80072743
12/15/2014|15:08:09.025 185:A0B271D4 ERROR :: HRESULT API failed: 80ee0061 = hr. DisableServManager
12/15/2014|15:08:09.026 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[133] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
12/15/2014|15:08:09.026 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[133] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
12/15/2014|15:08:09.026 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[133] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
12/15/2014|15:08:09.026 185:A0B271D4 ERROR :: WriteLogonSessionAssertionTrace: "Get[102] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058"
12/15/2014|15:08:09.026 185:A0B271D4 ERROR :: OnEnable: "Logon failed with UCCP status/diag code 0x80072743/0"
12/15/2014|15:08:09.026 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
12/15/2014|15:08:09.032 185:A0B271D4 ERROR :: SetStatusInfo: "Component LogonSession reports error code 0x80072743 (no auto-recovery)"
12/15/2014|15:08:09.035 185:A0B271D4 ERROR :: CreatePublication: "Unexpected function call. component state is 8."
12/15/2014|15:08:09.035 185:A0B271D4 ERROR :: EndBatchWrite: "CreatePublication failed. hr=80ee0061"
12/15/2014|15:08:09.035 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=2, hr=80ee0061"
12/15/2014|15:08:09.035 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=3, hr=80ee0061"
12/15/2014|15:08:09.035 185:A0B271D4 ERROR :: ~CManagedCredential: "type=2, domainAndUser=DOMAIN_NAME_REMOVED\USER_NAME_REMOVED, passwordAvail=1, cert=00000000, userCert=0"
12/15/2014|15:08:09.035 185:A0B271D4 ERROR :: ~CManagedCredential: "type=6, domainAndUser=, passwordAvail=0, cert=00000000, userCert=0"
12/15/2014|15:08:09.035 185:A0B271D4 ERROR :: AddManagedCredential: "Cred type 6 has 1 credentials"
12/15/2014|15:08:09.036 185:A0B271D4 ERROR :: OnEvent: "Component LogonSession failed during state STOPPED: hr=0x80072743, diagCode=0"
12/15/2014|15:18:06.842 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061"
12/15/2014|15:18:06.842 185:A0B271D4 ERROR :: LoadValue: "UCCP object is not received yet. groupIndex=0, hr=80ee0061" -
Remote PowerShell Connection to Lync Server With Kerberos authentication Fails
Hi everyone ,
Remote PowerShell to Lync Server With Kerberos authentication Fails .. Is there any reason for not being able to connect when authentication specified as Kerberos . But exactly same code works when Authentication is specified as "Negotiate"
E.g :
Error -
$session=New-PSSession -ConfigurationName Microsoft.Powershell -ConnectionUri https://serverName.lync.com/ocspowershell/ -Credential $cred -Authentication Kerberos
[serverName.lync.com] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. The authentication mechanism requested by the client is not supported by the server or unencrypted traffic is disabled in
the service configuration. Verify the unencrypted traffic setting in the service configuration or specify one of the authentication mechanisms supported by the server. To use Kerberos, specify the computer name as the remote destination. Also verify
that the client computer and the destination computer are joined to a domain.To use Basic, specify the computer name as the remote destination, specify Basic authentication and provide user name and password. Possible authentication mechanisms reported by
server: Digest Negotiate For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [], PSRemotingTransportExc
eption
+ FullyQualifiedErrorId : PSSessionOpenFailed
Works -
$session=New-PSSession -ConfigurationName Microsoft.Powershell -ConnectionUri https://serverName.lync.com/ocspowershell/ -Credential $cred -Authentication NegotiateHi,
Please double check if Windows Update is the latest version, if not, please update and then test again.
Please also ensure that the workstation you are using has network access to the Certificate Authority that signed the certificate.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Lync for mac 2011 not working in corporate LAN
Hi guys,
I have a mac client that has newest version 14.0.10 of lync installed. The Mac works on OS X Yosemite
operating system. The problem is that when you connect to corporate LAN, lync never connects and gives
following error:
Sign in to Microsoft Lync failed because the service is not available or you may not be connected to the Internet.
If you share a connection via mobile or connect via outside network, you are able to log in and lync functions properly
I have tried to update root certificate on mac via copying one from windows client, but with no luck.Hi Itseeker1,
As ErikHMac stated, the new version of Lync for Mac 14.0.11 has been released, you can install it and check if the issue is solved.
I know you have installed the root certificate on Mac, but please check it again and make sure the certificate is issued by an Enterprise Certificate Authority (Internal CA) and
also should be trusted by the Lync Server.
In addition, it looks like an Internet connectivity issue, please try to flush the DNS cache by running the following command.
dscacheutil -flushcache
Hope it can be helpful.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Lync for Mac 2011- Missing Certificates
I updated my Lync for Mac 2011 and I haven't been able to log in since. If I delete Lync and reinstall without the latest update (14.0.1) then at least I can see Lync but I can't log in. It says "Lync was unable to sing in. Please verify
your logon credentials and try again. If the problem continues, please contact your support team." We are on Office365 in our office and I'm the only one that seems to be missing my certificate in the keychain. Everyone else is having
no problem with Lync.
If I run the update (to 14.0.7) then Lync doesn't even open (this is reproducable every time I do this uninstall, reinstall, update sequence), I just get a big fail window that says the following:
Process: Microsoft Lync [86015]
Path: /Applications/Microsoft Lync.app/Contents/MacOS/Microsoft Lync
Identifier: com.microsoft.Lync
Version: ???
Build Info: Unknown-131205~0
Code Type: X86 (Native)
Parent Process: launchd [176]
Responsible: Microsoft Lync [86015]
User ID: 502
Date/Time: 2013-12-20 09:23:55.154 -0800
OS Version: Mac OS X 10.9.1 (13B42)
Report Version: 11
Anonymous UUID: AC53DD12-73A6-8DE3-FA1C-8B53636E08C5
Sleep/Wake UUID: 88EA8EF0-4BC9-4D66-B8CD-76B3BA39FBFE
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/USBHidWrapper.framework/Versions/14/USBHidWrapper
Referenced from: /Applications/Microsoft Lync.app/Contents/MacOS/Microsoft Lync
Reason: image not found
Binary Images:
0x8fec2000 - 0x8fef4417 dyld (239.3) <4B280BB1-55F8-313F-86A6-8ADD644ED69E> /usr/lib/dyld
0x90371000 - 0x9041cfff libcrypto.0.9.7.dylib (106) <DA3D5F8E-5822-3D41-BC1C-FFE1CC9BB42B> /usr/lib/libcrypto.0.9.7.dylib
0x9042c000 - 0x90495fff com.apple.SystemConfiguration (1.13 - 1.13) <542075CD-9085-3F30-B84B-DD0277D6A40E> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfiguration
0x9059b000 - 0x90800ff7 com.apple.AddressBook.framework (8.0 - 1365) <6D80FC70-269E-3C12-A9B4-279F27C58BEF> /System/Library/Frameworks/AddressBook.framework/Versions/A/AddressBook
0x9102b000 - 0x91032ffe com.apple.agl (3.2.3 - AGL-3.2.3) <E26A1D2C-596E-31F0-8E70-FC381874F8DA> /System/Library/Frameworks/AGL.framework/Versions/A/AGL
0x92658000 - 0x9285aff7 com.apple.CoreFoundation (6.9 - 855.11) <50F70E07-043A-3A2F-87EF-A36BA6C5C9D9> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x934da000 - 0x934daffd com.apple.audio.units.AudioUnit (1.9 - 1.9) <8A37963C-DF6F-3DFF-94E9-407DC5DFEDA9> /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x93f08000 - 0x9401fffb com.apple.WebKit (9537 - 9537.73.11) <74634980-1AC4-3874-9BC2-72E1ED8FB534> /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
0x94f26000 - 0x94f7bff7 com.apple.QuickLookFramework (5.0 - 622.3) <3C6ADC02-2C67-361B-B042-47DDCC0EDA5F> /System/Library/Frameworks/QuickLook.framework/Versions/A/QuickLook
0x95c83000 - 0x95cf8ffb com.apple.framework.IOKit (2.0.1 - 907.1.13) <86D72735-9DFB-35C8-83F7-CE0DCF17D354> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x95efa000 - 0x95f08ff7 libz.1.dylib (53) <858B4D9F-D87E-3D81-B07A-DF9632BD185F> /usr/lib/libz.1.dylib
0x9633a000 - 0x9633afff com.apple.Carbon (154 - 157) <C49AD4A1-8DE3-357D-AEF3-D6CD39EA91EF> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x964cc000 - 0x964ccfff com.apple.Cocoa (6.8 - 20) <407DC9E6-BBCE-3D34-9BBB-00C90584FFDF> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
0x96bd0000 - 0x96e3dff6 com.apple.security (7.0 - 55471) <5FCF76B2-92C6-3404-87D3-91B3F6E203AA> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x96e68000 - 0x96f54ff7 libxml2.2.dylib (26) <32040145-6FD6-3AD2-B98B-39F73BF9AC47> /usr/lib/libxml2.2.dylib
0x980f9000 - 0x98112fff com.apple.Kerberos (3.0 - 1) <91F17EB2-C70C-359C-B09D-96B52D2A9C9F> /System/Library/Frameworks/Kerberos.framework/Versions/A/Kerberos
0x98116000 - 0x98147ff4 com.apple.securityinterface (9.0 - 55047) <0D5ED2B8-C973-3C91-BA45-22501A043263> /System/Library/Frameworks/SecurityInterface.framework/Versions/A/SecurityInterface
0x9849e000 - 0x98610ffb com.apple.audio.toolbox.AudioToolbox (1.9 - 1.9) <E5FFD35D-18CF-333C-BECE-39F8E47BE707> /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x98613000 - 0x98621ff3 com.apple.opengl (9.0.83 - 9.0.83) <16CFFD50-217E-3E18-88AF-7F2AD980628B> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
0x9ac69000 - 0x9ac86ffb libresolv.9.dylib (54) <3EC12A7F-6BA1-3976-9F1F-6A4B76303028> /usr/lib/libresolv.9.dylib
0x9b41b000 - 0x9b5c7ff1 com.apple.QuartzCore (1.8 - 332.0) <07F9B77F-35A2-3D21-99FA-CD3FCE5B9C7B> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
0x9b8bf000 - 0x9b8c0fff libSystem.B.dylib (1197.1.1) <C58F0CC9-C1FD-3024-9358-D3359A6BBCAD> /usr/lib/libSystem.B.dylib
0x9bb23000 - 0x9bd9fff7 com.apple.QuickTime (7.7.3 - 2826.0.1) <42542002-DCFF-3675-B919-440EC5057D56> /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
0x9bda0000 - 0x9bdf5ff7 com.apple.audio.CoreAudio (4.2.0 - 4.2.0) <0F1C111F-1E64-33BB-A69F-14643B3037D5> /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
Model: iMac11,1, BootROM IM111.0034.B02, 4 processors, Intel Core i7, 2.8 GHz, 8 GB, SMC 1.54f36
Graphics: ATI Radeon HD 4850, ATI Radeon HD 4850, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.74.0-P2P
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: ST31000528ASQ, 1 TB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: Hub
USB Device: PT-9500PC
USB Device: DG Dashuo USB-V4.0
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Internal Memory Card Reader
USB Device: Hub
USB Device: Keyboard Hub
USB Device: Apple Keyboard
USB Device: IR Receiver
USB Device: Built-in iSight
Thunderbolt Bus:
I've checked out all the forums and walked through some of the steps and I think I figured out my issue: I have NO certificate in my keychain whatsoever; Known or unknown. My account/system administrator here is unsure how to get me a certificate because
we use Office 365 and he says when I install Lync or try to log in it should be giving me a new certificate. Does anyone know how to get me a certificate? Or know how my administrator will get it to install a new certificate?If your OSX filesystem is formatted as: Mac OS Extended (Case-sensitive, Journaled) then the Lync 14.0.7 upgrade will immediately crash. You need to follow the instructions
in the blog post referenced below:
http://preston4tw.blogspot.com.au/2013/12/microsoft-lync-2011-for-mac-1407-bug.html
This will fix the immediate crash and if your Lync worked before the upgrade to 14.0.7 it should work again. If you have certificate problems then this would not be the only
fix required. -
Lync for Mac 2011 does not update Presence properly.
Hello all,
I work in a Enterprise environment, we run Active Directory and bind our Macs to the domain. We use Lync for Mac, and I've noticed that on the Mac clients, the user status does not update accordingly. When my users are in a conference call, it shows
available, etc. It works fine on a Windows machine with that same user.
If the event is on the Outlook calendar, sometimes it will show them as away during that time period, but it does not seem to update when on the phone/in a meeting, etc.
Any advice would be appreciated, my user is on Mac OSX 10.9.3 and Lync 14.0.8.
Thank you,
MichaelWe are seeing the exact same thing at our company. A hundred or more Macs all with broken presence.
Its issues like this that have us looking at Jabber now - Cisco doesn't seem to have buggy OS X software like Microsoft. That will be 40,000+ seats lost due to this and other issues. Maybe if enough hit MS in their pocketbook
they will start paying more attention to Macs.. or at least test them before rolling out software.
Note a few things regarding our setup:
1. Our Lync is on-prem 2010 and 2013 mix
2. Our email is in 365
3. We are using ADFS and FIM for SSO, Dirsync.
4. We do not domain join our Macs. (back when Lion wrecked all our domain joined accounts we stopped with that foolish practice)
It worked with previous versions of Lync 2011.
It works for zero Lync 2011 users. Lync 2013 on-prem domain joined machines work. We see the same thing where a Mac users also logged into 2013 on a Windows machine will help update the Lync 2011 client... but its not an acceptable work-around.
I suspect its having difficulties with the external cert. -
The hard drive on my Mac Book Pro failed last week. I just put a new Samsung SSD in this thing and had to load the Snow Leopard OS that came with the computer. I had Mt. Lion on the old drive that I had purchased last year but no boot disc made. I have made several attempts to get the Mt lion soft ware on the computer but the Apple store does not have it only mavericks but my Snow Leopard version is too old for it so I cant get it either. How do I get something to run the software that I had on the old drive?
Unfortunately I lost my life and am trying to rebuild. Isn't the technical era great.
Backup, backup, backup
As a minimum, use 3-2-1 (or even more)
3 copies of your data (original copy counts as 1)
2 different backup utilities/storage formats (protects from bugs in the software)
1 copy off-site (protects against theft, fire, and natural disaster)
More backup copies are even better.
Backup disks are cheap compared to the lost of personal data that does not exist anywhere else. -
just got a Nikon D610 and CS5 for Mac can't open the images -- message says installed version of camera raw doesn't support the camera. Downloaded the Raw 6.2 update for Mac, but installation failed. Now what?
The D610 didn't get out-of-the-box RAW support until Photoshop CC.
You can either upgrade to CC or use the DNG Converter to convert and open your DNGs in CS5. -
AD stored user Photos do not display in Lync for Mac 2011
I'm using Lync for Mac 2011 14.0.9 and the my user photo as well as the photos of other users who are using photos stored in our AD do not display. This behaviour has been occurring at least since 14.0.5. The behaviour occurs regardless of whether
I sign in using Kerberos or name / Password. This behaviour is common for all our Mac lync users. The only photos that display are ones from windows lync users that have chosen to use a photo that is stored on the internet somewhere.
The Lync for Mac 2011 client is running against Lync Server 2010 and Exchange 2010 servers.
I also have the common problem that I cannot search the global address book for lync users. Maybe this is related but none of the reports I've seen about the address book search have mentioned anything about photos not displaying.
Anyone Experience similar issues or know where I could start to find the problem with the contacts display? It used to work correctly way back in 14.0.2 and subsequently an update around 14.0.5 killed the features for me.
Oh and the Mac is running OSX 10.9 but the issues also occurred in OSX 10.8
Thanks!Hi,
Did you choose “Show a picture from a web address” on Windows Lync 2010 client? If yes, on Windows Lync 2010 client, choose “Default corporate picture” instead of “Show a picture from a web address”. Then open Lync 2011 on Mac computer to test the issue.
The choose will sync to all Lync clients for the same Lync account.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
QoS application for Lync for Mac 2011 clients
Hi guys,
I'm deploying Lync 2013 at a customer site. We'll be applying QoS by enforcing static port ranges within Lync (CsConferencingConfiguration), and applying ACLs on the network equipment and dropping the various Lync modalities into the relevant QoS queue,
pretty standard.
Quick question. What's the expected behaviour for the Lync for Mac 2011 client. Will it honour the port ranges as defined on the Lync server conferencing configuration? Can't seem to find the answer anywhere online or in the forums.
2nd question - does anyone know what the meaning of the following command:
Set-CsMediaConfiguration -EnableQoS $True
According to the TechNet
article titled Enabling QoS for devices that are not based on Windows, it sounds like this command has some role to play in enabling QoS for non-Windows devices... just wondering if that includes Mac OS. Again, information is sketchy
on this.
Cheers, James.
James FrostOne way you can check is simply by running a WireShark capture on a Windows endpoint. Either run a capture on the Mediation server to sniff a PSTN call, or as RTP traffic is point to point in a two-party call you can just call a Windows PC from the
Mac. Look for the DSCP section in the Internet Protocol area as shown in this non-Lync article:
http://conceptsfortheroad.com/2012/06/how-to-verify-dscp-value-in-not-being-stripped/
Or play with this filter "ip.dsfield.dscp == 46" to see if something is being sent at all.
Hopefully someone has done a deep dive and will chime in, but I'd love to see your results!
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications -
After upgrading to yosemite my Lync for Mac will not sign in. It seems to connect, briefly displays a contact list, and then goes back tho the sign in screen and it starts all over. I am running version 14.0.9, and my advanced settings seem to be the same. Please help!
This Microsoft KB post, titled "Lync for Mac 2011 14.0.9 is incompatible with OS X Yosemite 10.10" explains the incompatibility
http://support2.microsoft.com/kb/3012202
The fixed version of Lync to support Yosemite is here
http://www.microsoft.com/en-us/download/confirmation.aspx?id=36517 -
One of my customers has a Windows Server 2008 R2 cluster for an Exchange 2010 Mailbox Database Availability Group. Lately, they've been having problems with one of their nodes (the one node that is on a different subnet in a different datacenter) where
their Exchange databases aren't replicating. While looking into this issue it seems that the problem is the Network Manager isn't started because the cluster service is failing. Since the issue seems to be with the cluster service, and not Exchange,
I'm asking here.
When the cluster service starts, it appears to start working, but within a few minutes the following is logged in the system event log.
FailoverClustering
1572
Critical
Cluster Virtual Adapter
Node 'nodename' failed to join the cluster because it could not send and receive failure detection network messages with other cluster nodes. ...
It seems that the problem is with the 169.254 address on the cluster virtual adapter. An entry in the cluster.log file says: Aborting connection because NetFT route to node nodename on virtual IP 169.254.1.44:~3343~ has failed to come up.
In my experience, you never have to mess with the cluster virtual adapter. I'm not sure what happened here, but I doubt it has been modified. I need the cluster to communicate with its other nodes on our routed 10. network. I've never experienced
this before and found little in my searches on the subject. Any idea how I can fix this?
Thanks,
Joe
Joseph M. Durnal MCM: Exchange 2010 MCITP: Enterprise Messaging Administrator, Exchange 2010 MCITP: Enterprise Messaging Administrator, MCITP: Enterprise AdministratorHi,
I suspected an issue with communication on UDP port 3343. Please confirm the set rules for port 3343 on all the nodes in firewall and enabled all connections for all the profiles
in firewall on all the nodes are opened, or confirm the connectivity of all the node.
Use ipconfig /flushdns to update all the node DNS register, then confirm the DNS in your DNS server entry is correct.
The similar issue article:
Exchange 2010 DAG - NetworkManager has not yet been initialized
https://blogs.technet.com/b/dblanch/archive/2012/03/05/exchange-2010-dag-networkmanager-has-not-yet-been-initialized.aspx?Redirected=true
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Re install CS5.1??
Mac 10.7 failed - upgraded to Mac 10.9, CS 5.1 did not transfer from external HD. How do I reinstall - do I delete what I coped from external HD, then reinstall from disks?Adobe applications should be installed, not transferred. If yoiu have the disks then yes, use them. IF you do not you can download from:
Download and Installation Help -
https://helpx.adobe.com/download-install.html -
Indesign standard version installation error for Mac OS: "installer failed to initialize.
Indesign standard version installation error for Mac OS: "installer failed to initialize. Please download Adobe Support Advisor to detect problem". Transferred by application over to new laptop, application considered damaged, with instructions to reinstall. Attempting from downloaded file.
go to HD>library>application support>adobe>caps and rename the caps folder.
go to USER library>application support>adobe>OOBE and rename OOBE folder
install Adobe application manager from below link.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
Maybe you are looking for
-
How to open Photomerge Panorama in PSE 12. The option is not available when I choose File/New.
In PSE 12 (iOS) I can't find "Photomerge Panorama". The tutorial says it should be available in the menu File/New. Yet it isn't.
-
Setting Page Items from SQL Query
Hi, </br></br> I am using "SQL Query (PL/SQL function body returning SQL query)" for a report. In the body of the sql query, after calling a function, I have the following statement: </br></br> APEX_UTIL.SET_SESSION_STATE( p_name => 'P13_MESSAGE', p_
-
I'm new to B1 and I'm trying to add a UDF to inventory master. The type options include "Regular" & "Text". What is the difference and when should you use one vs the other?
-
I am working on trying to get LabView to communicate with an Allen-Bradley Compact Logix PLC using the NI Ethernet I/P driver. I am currently getting errors on both system of a CIP Message instruction error and cannot determine if the problem is in
-
Hi, I have a small issue: I have a split with two outgoing flows, let us call them flow A and flow B. Now I want that the flow continues after the Join, if flow A has finished, but not if only flow B. Meaning flow B is a kind of optional. Nevertheles