Lync or Skype and O365
Try this
https://support2.microsoft.com/common/survey.aspx?scid=sw;en;3695&showpage=1
Troubleshooting Lync Online sign-in for admins
When i launch skype for business it asks me for my email address..
I type it and then click sign on and get the following error message:
"Skype for Business couldn't find a Skype for Business Server for "domain.com" there might be a issue with Domain Name Services (DNS) configuration for your domain. Please contact your support team.
Problem is I have not setup any Skype server.. I was assuming since our services are hosted with microsoft they would have this in place as part of our service.
Am i incorrect? Is their a server I need to put into the manual settings?
Similar Messages
-
Office 365 Lync Online / Skype For Business Journaling
Hello,
From what I have found in my research, there is no way to journal Lync Online / Skype For Business IMs with Office 365. Please correct me if I'm wrong. Is anyone doing this by way of workaround or 3rd part product?
Thanks in advance.
This topic first appeared in the Spiceworks CommunityThanks for the clear dialogue and responses.
I want upgrade from Skype to Skype for Business, BUT want to retain my Skype ID (which is printed on my business cards) and existing contact connections.
My situation is similar to Jim Carpenter's, in that I've used Skype for years. I have it linked to my old Microsoft account that I'd set up for the old SkyDrive (now OneDrive) product. When I bought Office 365 Business Premium (includes Skype for Business), it necessitated creating a second Microsoft ID using the suffix [e-mail removed for privacy and security] to set up my new business account. That is a different login than my existing Skype login tied to the original MS account, and the new one not only accesses the MS programs, it accesses Exchange, through which I run Outlook calendar and contacts.
So, are these the steps I should take?
Unlink my existing Skype account
then uninstall Skype
then install Skype for Business
I would guess that there would need to be a re-linking step of some sort, too, but I'm unclear on this. Guidance?
Please confirm that is the best path. Will this process allow me to migrate the Skype ID and contacts to the business app?
Thanks much. -
Lync 2013 skype federation approved
Hi
I have got skype and lync 2013 IM federation approved on
https://pic.lync.com. My sip domain shows activated on its page. Now what next shall I do ? As I am still using self issued certificate on external lync edge interface, do I need to apply a public certificate so that I can add skype to my local network
lync client? I could not send IM to my skype account otherwise. It is coming with an error id 504 source 239. As I have sip.xxx.com.au, webconf.xxx.com.au, av.xxx.com.au which point to lync edge and meet.xxx.com.au, dialin.xxx.com.au, owa.xxx.com.au, lyncdiscover.xxx.com.au
which point to iis arr reverse proxy. Also have lynvweb.xxx.com.au as external web service. In my case, if I would need to apply public SSL to make my lync work with skype, do I have to apply a multi domain public certificate which up to 10 domain ?Would go
daddy certificate be used ?
Also, if lync edge external interface certificate get replaced, it needs to replace certificate on iis arr reverse proxy server of its default web site binding with public certificate too?
WenFei CaoCorrect, you need public CA issued certificates for your edge external interface in order for federation to work.
Best practice would be to have a public cert loaded on both your Edge and Reverse proxy servers, however in regards to Federation, it's your Edge that will be in use. So you don't need to load a public cert on your Reverse proxy (I assume you've loaded
your root cert on to any mobile devices or devices that connect in) but I personally would for the sake of completeness and to prevent any possible certificate trust issues in the future. (it will save you loads of headaches) I would typically only use an
internal cert for external facing when I am testing/labbing and then replace them with public certs before going into production.
Also if you haven't already, follow these steps to configure the provider in Lync: http://blogs.4ward.it/lync-2013-and-skype-federation-how-to/
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer" | Blog
www.lynced.com.au | Twitter
@imlynced -
Lync 2013 & Skype Integration 3rd Party Cert. Requirement
hi to all
I am a liitle bit confused about the Trusted Certificate (public certificate) need for the Lync 2013 server and Skype integration.
Our problem is trying to Integrate Skype with our Lync 2013. We configured Lync Edge and Lync Backendserver with internal Certification Authority Certifcates ,we finished provisioning Lync 2013 with Skype according to the "http://www.microsoft.ctom/en-us/download/details.aspx?id=39071"
document and we received answer from Microsoft that we ıntegration is finished.
But we could not make any call or add contacts either from Skype no Lync client.
Some forums say that we had to integrate Trusted Certificates to our Lync Edge server (http://social.technet.microsoft.com/Forums/lync/en-US/ec3142cb-179a-427d-909c-135052621043/how-to-deploy-the-federation-with-skype?forum=ocsmobility)
But I could not see in official documents.Can someone lead me the correct way to do this ?
ThanksYou will need to change the external Edge certificate to a public issued UC/SAN certificate. Without a public cert the remote party (in this case the MSN/Skype servers) won't be able to establish trust and will fail.
You can do this by re-running the Lync Deployment Tool & Request/Assign Certificates
Here is a walk through:
http://www.digicert.com/csr-creation-lync-2013.htm
http://www.digicert.com/ssl-certificate-installation-lync-2013.htm
Because you are replacing, you will need to restart your Edge services afterwards for it to take effect (You can use Lync Management Shell and run Stop-CsWindowsService & Start-CsWindowsService)
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer" | Blog
www.lynced.com.au | Twitter
@imlynced -
Lync with skype a SIP provider
Dear All,
is it possible to integrate lync with skype as voip service for international calling ?Actually you can. You need to use Audiocodes eSBC that has a native capability to integrate with Skye as a VOIP provider ann then integrate Lync mediation server with the eSBC and configure routing accordingly.
http://www.audiocodes.com/skype
http://thamaraw.com -
Hell All!
Does anyone know a date when Lync to Skype video calls will be available? Specifically, a Skype Mobile user to a Lync Mobile user?
Thank you in Adavance!
RonHi Ron,
This feature is still under development, I believe that it will be published in the near futher.
Microsoft Lync-Skype connectivity v2 – Adds Video and More
http://blogs.technet.com/b/nexthop/archive/2014/02/18/microsoft-lync-skype-connectivity-v2-adds-video-and-more.aspx
Best regards,
Eric -
When i login to my mac, it opens iTunes, Skype and AIM. I've tried deleting these from the login items, but they are not on the list. Can anyone help?
babowa wrote:
If you do not lock that folder immediately after deleting all the contents, it will simply populate again (Resume - a "feature" in Lion). You do that by doing a Get Info (highlight folder and press Command + I keys), unlock the lock at the bottom, enter your admin password, then check the box to lock the folder. lock the lock and you're done.
Yes, that is correct. The alternative is to quit all applications prior to logging out. Lion will then have a chance to remove the saved states.
babowa also wrote:
And, for the OP:
It has also been a regular feature of Mac OS to automatically open any window that was open at shutdown. To avoit that behavior, simply close any Finder windows and properly quit applications by closing their window and using Command + Q (or File >Quit).
This was true only for the Finder. Prior to Lion, no other apps would launch unless they were included in the Login Items for the account. And the OS would not restore windows for other apps.
A very small number of apps (TextWrangler is an example) implemented this capability prior to Lion. They could restore previously opened windows. But that is an application feature, and can be controlled by the application's preferences. Lion implements it at the system level, and users have virtually no control on a per application basis. -
Hello, I've updated the iPhone I have got I have a problem I hope you respond to some of the applications no longer work, such as the safari and skype and many applications are no longer working with the ios7.0.4
Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove apps from Recently Used (multi-tasking) list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Swipe up on the app preview card to remove it from the list
- Press the home button when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue. -
My ipod touch is telling me that the Skype and Twitter apps need updating. When I try to update them they both fail. I have tried numerous times. I have tried connecting the ipod to itunes and removing the apps, to reload them but that does not work either. If I try and update the apps through itunes the system tells me they are updated. Can anyone assist please?
- Try a reset. It cures amny ills
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Have you tried deleting them from the iPod and then redownloading them dorectly to the iPod?
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
When I open skype gives me an error message
how can I solve this problem?xdenisu,
Try This.
Go to device manager and disable Bluetooth device.
Then run Skype and go to, Tools >> Options... >> Advanced Settings >> Manage other programs' access to skype and remove Bluetooth software >> Quit Skype.
Re-enable Bluetooth in Device manager then try running Skype.
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others. -
I upgraded to 5.0.5 on my iphone4 and now 2 apps won't work - Skype and Pinterest. When I tap them they open and then immediately close. I have tried turning off my phone and deleting the apps then reinstalling them. They still don't work. What do I try next?
I went through your instructions Notification was already off
Alert Sytie was set on None - switched to Alerts
Badge App icon was set on off Turned it on
Sounds was set to off Turned it on
View in Lock Screen was set to off Turned it on
Still does not work. Thanks for trying -
I hate the new skype and i wish i culd go back to ...
My Skype got updated to the latest version(7.0) and I absolutely hate it.I use Skype everyday for at least 3 hours to talk to my friends and the new version is just awful and I cant keep using it. After about 6 hours on the new version I decided to downgrade to the prior version (6.2) winch I think was Skype best for now.It didn't work well (I couldn't read group messages unless I was managing the group and the chat was a little buggy) but I dint care because anything is better then the new 7 version.
Today for some reason it log me out of Skype and I couldn't log in into the old Skype so I had to update to the new Skype which made we very upset.
I do realise that the old Skype was old and the devs tries to make it look newer by following the win8 trend and that some people will like the new Skype and they are not as conservative as i am so i suggest the simple solution of giving people choice. Make the new version the default layout but make it possible to change it in the options so users which don't like the new UI can revert back to the good old one.The new Skype is probably designed to match the Windows 10 style and feel over all three platforms it will be running on.
Skype versions below 6.16 (or 14 ) is retired, 6.2 is below so you cannot log in using that one.
This one however will:
http://download.skype.com/msi/SkypeSetup_6.21.0.104.msi -
Really Apple?
With the release OSX 10.8.5 Apple has once again showed its true colors, and continued its efforts to create a closed Apple system, which eliminates third party vendors, unless, one can only assume... they pay.
Included in this OSX update is the disabling of the built-in camera to work with third party applications such as Skype and Gmail video chat. No surprise the camera works just fine with Apple apps such as Facetime and Photobooth.
The answer I got on my call to AppleCare to ask for assistance in reinstalling 10.8.4, so that I may Skype again, was we can not do that. You can not go back unless you have a time machine bkup.
Can anyone help me get back to to 10.8.4 on my 2013 MB Air?
I do not have a time machine bkup as this computer is not used to store important documents.
Thank you.Read this post: 10.8.5 Broke Camera Usage For 3rd Party Apps Like Skype
Another: isight not recognized in Skype after 10.8.5 upgrade
Don't panic. Skype simply needs to update its app. -
I have created an App-V 5.0 Package for Office 365 ProPlus using the documentation provided here:
http://technet.microsoft.com/en-us/library/jj219422.aspx
I am able to load the App-V Package into my SCCM 2012 SP1 environment and deploy the package to a test machine
Within SCCM, I have configured the deployment type to only select a couple of applications. Notice that Lync, Outlook, Infopath and Onenote are not selected.
http://i.imgur.com/1eMxUlY.jpg
For my deployment type, I only selected Word, Excel and Powerpoint. Looking at my test machine, those 3 applications now show up in my start screen.
http://i.imgur.com/amZmxAT.jpg
I don't see any of the other Office applications be default on my start screen, so I would think all looks good. If I type another Office application, lets say access at the start screen I get, "No apps match your search."
http://i.imgur.com/fxbWEvb.jpg
But if I type Lync, Outlook, Infopath or Onenote, it shows me that those applications are available, and I can launch them as an App-V application just as I could Excel, Word or Powerpoint, the applications that I wanted to have available.
This is not what I was expecting when I went through the trouble to create an App-V package. It looks like almost all of the apps become available on my client machine, all App-V is doing is making the application button in the start screen a little
harder to find.
What is interesting is that for the applications I did want published, I can search for them by just entering a few letters of the application name, and they show up with the 2013 version label, see below for an example search for Word.
http://i.imgur.com/0LeS05z.jpg
For the applications that I did not publish but still show up on my client, I have to type in the full name of the application for the launch button to come up. For example, I can't type lyn and expect to see Lync, but if i type lync I will get an
option to launch the application. The same goes for Outlook, Infopath and Onenote, and when you do type in the full namke of the app, it doesn't show the version number like Word does as Word 2013, it just shows Lync, or Outlook, or Infopath, or
Onenote.
http://i.imgur.com/QV1afuc.jpg
vs
http://i.imgur.com/PxgSmUc.jpg
Can anyone from Microsoft confirm that this is expected behavior. If this is to be expected this is pretty disappointing, because a main point of the App-V package is it is the only way to limit which applications are deployed via Office 365 ProPlus
but from what I can tell, it really isn't limiting anything beyond the start screen for most cases.So it looks like the config xml files are the best option
http://blogs.technet.com/b/office_resource_kit/archive/2013/12/02/announcing-app-v-5-0-sp2-support-for-office-2013-volume-licensing-editions.aspx
You can now use the Deployment Configuration file to configure the Office installation. One question I often get is, “How do I disable msaccess.exe or infopath.exe from an Office install if I am not using the MSI package?” This can be done by modifying the
Deployment Configuration file in App-V with entries like the following:
<Application Id="[(AppVPackageRoot}]\office15\MSACCESS.EXE" Enabled="false">
<VisualElements>
<Name>Access 2013</Name>
<Icon />
<Description />
</VisualElements>
</Application>
That will prevent App-V from publishing msaccess.exe on the system and/or you can remove any undesired application shortcuts from publishing on the targeted computer using the shortcuts properties by deleting or commenting them out. Once you’ve configured your
Deployment and User Configuration files, you’ll have everything you need to import the packages into your App-V environment to start testing. -
10.8.2 Update Causes Skype and Chrome to Crash
I just finished the OSX 10.8.2 update and now Skype and Chrome/Rockmelt won't open on my Macbook Pro.
I get the following error message:
"RockMelt (or Chrome/Skype) quit unexpectedly.
Click Reopen to open the application again. Click Report to see more detailed information and send a report to Apple."
I've tried opening the applications again, (repeatedly) as well as restarting my computer to no avail. Everything was working perfectly prior to the update. Anyone else having the same problem? Or advice on what to do?So far, here are the programs that I've experienced problems with:
Non-Apple Programs
Chrome/Rockmelt
Skype
Remote Desktop
Apple Programs
iPhoto
Dashboard (sometimes)
AppStore (sometimes)
Everthing worked perfectly until the update and now the programs won't even open. Also, I've redownloaded Chrome/Rockmelt and Skype with no success.
Thanks!
Maybe you are looking for
-
Itunes refuses to import some mp3 files.
Hi, Can someone please advise. I have an album of MP3 tracks. For some reason Itunes refuses to import all but 2 of the songs on the ablum. I have the files on the hard drive in my music folder which should be auto sync to Itunes. This does not happe
-
Signal degradation when using busses/auxes.
i reviewed some mixes done three years ago, when i didn't use subgrouping and the busses were only used for fx returns. my current projects sound muddier than these older ones. am using auxes to sum different sections of the arrangement together now.
-
What should i do?
-
it has been over 20 hours now
-
Updates to Acrobat 8 Professional Cause Preferences to Reset
For some time now, any time the software is updated all Preferences settings return to their default settings. Anybody know why this is happening?