Lync Push with WP8 getting SIP/2.0 408 Request Timeout

Hi,
i have a problem with Push service with WP8 devices. Push service should be installed correct (get an success with the push test).
When i send an IM to the WP8 (Lync started and in background) the first IM always arrive. But all additional IMs did not and i got an time out massage in the Lync PC Client.
In the OCSLogger on the edge server i got an "SIP/2.0 408 Request Timeout" and "The client did not respond to the invitation".
All other in the log seems to be ok.
Has anyone an idea?
Regards
Martin

Hi,
Did the issue happen only for you or for multiple users?
You can use another Win Phone and test again.
Please update to the latest version for Lync Server and client and then have a test.
Please run the command Test-csMcxPushNotification such as:
Test-CsMcxPushNotification -AccessEdgeFqdn "atl-edge-001.litwareinc.com" to check if the push notification service is working.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Similar Messages

Lync Implementation with different internal and external domain sync

Hello Experts,
Having Windows 2012r2 with Lync 2013 frontend and Edge 2012 server on Win2012. Internal domain name is test.local and Internet domain name is : tgroup.com. Internally all the clients are able to sync with frontend
server using [email protected] or [email protected] Internal CA and External Digicert works fine. But only problem is with external clients who want to communicate through edge server.
Edge server has 3 LAN ip address (nat with public IP), 10.10.10.2, 10.10.10.3, 10.10.10.4 and another Internal network interface which has ip 10.10.20.3
which uses that to communicate with front-end.
How to achieve this ? We dont have reverse proxy configured and we have only two servers.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

The reverse proxy is used to publish URL's like the meet and dialin url, the address book url and the lync mobile client (smart phones and tablets) urls. This doesn't impact the external desktop user access as thats via the edge server. There is more to
it than that but for the sake of keeping this simple lets stick to that for now.
As far as SIP domains go. Think of your Lync users as having a SIP address similar to email addresses. You wouldn't have a user with an internal email address but with a different external email address. In fact best practice is to have the Lync SIP address
match the email address.
My reccomendation is to use the ttgoup.com as a sip domain and not the test.local
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Lync Sorted blog

Having issues with Lync meetings with external partners

This is basically a new concept for us because Lync was used mostly for internal use. The last couple of times we tried to have a meeting with a non-Federated partner like a reseller giving a demo, they would send us a Lync invite and when I try to connect
to the meeting by clicking the Lync invite in the email, my locally installed Lync 2013 client opens a window and I hear a series of beeps, about 20-30 like its trying to connect. It makes a connection for a few seconds (I enter the virtual lobby) and then
it disconnects.
This has happened with two different corporations, one of them being Microsoft. The companies are not Federated with us so I guess the questions are this:
Does the company have to be Federated with us just to have a meeting?
Should I enable partner domain discovery under Access Edge Configuration in Control Panel? (Seems like this is something you don't want)
I have Centralized logging running and I extracted the logs for the time the meeting was trying to start. I used Snooper to review the logs.
I am seeing two errors which are below:
SIP/2.0 403 Forbidden
ms-diagnostics: 1027;reason="Cannot route this type of SIP request to or from federated partners";source="sip-edge.ourdomain.com" (the source is our Edge)
SIP/2.0 504 Server Time-out
ms-diagnostics: 1017;reason="Cannot route From and To domains in this combination";summary="Cannot route between the source and destination domains because partner discovery is not enabled";external-domain="theirdomain.com";external-type="domain-type-remote";internal-domain="ourdomain.org";internal-type="domain-type-local";source="sip-edge.ourdomain.com"
504 is a bit confusing because it implies that you have to be Federated with a partner just to have a meeting.

Hi shadowtuck,
I reviewed your last post (https://social.technet.microsoft.com/Forums/en-US/40422065-9244-4d65-a538-b702315d6727/cant-share-desktop-in-lync-meeting-with-microsoft?forum=lyncdep
), and I did some more research.
You have two choices:
1. Enable open federation.
2. Join the meeting as a guest by using Lync Web App.
The diagram for your reference.
If you do not want to enable open federation, you have to join the meeting as a guest by using Lync Web App.
Best regards,
Eric

HT5029 Reconfiguring existing subscribed calendars to push with iCloud

I am not able to complete "Reconfiguring existing subscribed calendars to push with iCloud" using the directions given. The location, neither On My Mac, nor iCloud show up when I try to reconfigure (as shown in instructions here: http://support.apple.com/kb/HT5029). When I choose Get Info from my birthday subscription calendar, I can only "Ignore Alerts" or "Open Address Book."
I want to be able to see my birthday calendar items on iCloud.
Any help would be appreciated!
Many thanks, Cheryl

Greetings Cheryl,
The Birthday calendar in iCal s not a server based subscription which is what that article you reference deals with. The Birthday calendar feeds directly from the contents of the Address Book on your Mac.
To have your birthdays in iCloud:
Go to Apple > System Preferences > iCloud -- Make sure "Contacts" (aka Address Book) is checked.
Then follow this article: http://support.apple.com/kb/PH2676
Hope that helps.

Problem with Set/Get volume of input device with single channel

from Symadept <[email protected]>
to Cocoa Developers <[email protected]>,
coreaudio-api <[email protected]>
date Thu, Dec 10, 2009 at 2:45 PM
subject Problem with Set/Get volume of input device with single channel
mailed-by gmail.com
hide details 2:45 PM (2 hours ago)
Hi,
I am trying to Set/Get Volume level of Input device which has only single channel but no master channel, then it fails to retrieve the kAudioDevicePropertyPreferredChannelsForStereo and intermittently kAudioDevicePropertyVolumeScalar for each channel. But this works well for Output device.
So is there any difference in setting/getting the volume of input channels?
I am pasting the downloadable link to sample.
http://www.4shared.com/file/169494513/f53ed27/VolumeManagerTest.html
Thanks in advance.
Regards
Mustafa
Tags: MacOSX, CoreAudio, Objective C.

That works but the the game will not be in full screen, it will have an empty strip at the bottom.
I actually found out what's the problem. I traced the stageWidth and stageHeight during resizing event. I found out that when it first resized, the stage width and height were the size with the notification bar. So when I pass the stage into startling, myStarling = new Starling(Game,stage), the stage is in the wrong size. For some reason, I can only get the correct stage width and height after the third resizing event.
So now I need to restart Starling everytime a resizing event happened. It gives me the right result but I am not sure it is a good idea to do that.
And thanks a lot for your time kglad~I really appriciate your help.

Problem with SET GET parameters

Hi all,
I am facing a problem using SET and GET parameters.
There is a Z transaction(Dialog program) where some fields of screen are having parameter ID's. That transaction is designed to diaplay/change status of only one inspection lot at a time.
Now I need to call that transaction in a loop using BDC. I mean i need to update the status of multiple inspection lots(one after the other). Before calling the transaction I am using
SET PARAMETER ID 'QLS' FIELD lv_prueflos.
Unfortunately the transaction is only changing the first inspection lot. When I debugged I found that the screen field is changing in PAI. Even though in PBO it shows the next value, when it goes to PAI it is automatically changing to the first value(inspection lot).
Example: Inspection Lots : 4100000234
4100000235
4100000236
Now first time when the call transaction is being made the status of insp lot 4100000234 is changed. For the second time when insp lot 4100000235 is being passed in PBO ican see this. But the moment it enters PAI the screen field changes to 4100000234.
Could you pls help me in solving this issue.
Thanks,
Aravind

Hi,
Problem with SET GET parameters
Regarding on your query. Follow this below link.
It will help you.
Re: Problem with Set parameter ID
Re: Problem in Set parameter ID
I Hope it will helps to you.
Regards,
Sekhar

MRS Push with SMP 3.0 and Service Manager 4.2 is not working

Hi All,
I am working on SMP 3.0 SP 06 Service Manager 4.2 application .
I have configured MRS Push which is not working . Service Order push is working fine.
If anyone has configured MRS push with any one the Syclo mobile products ,Please share the steps.
Thanks in advance.
Thanks
Neha

Neha,
Can you refer this OSS note: 2014454 for MRS setup.
Thanks,
Manju

How to get multiple phones in a request with SelectCmDevices

Hi all:
I had met this problem, i can get only one phone with this request:
"<soapenv:Envelope xmlns:xsi=\"http://www.w3.org/2001/XMLSchema-instance\" xmlns:xsd=\"http://www.w3.org/2001/XMLSchema\" " +
"xmlns:soapenv=\"http://schemas.xmlsoap.org/soap/envelope/\" xmlns:soap=\"http://schemas.cisco.com/ast/soap/\" xmlns:soapenc=\"http://schemas.xmlsoap.org/soap/encoding/\"> " +
"<soapenv:Header>" +
"<AstHeader xsi:type=\"soap:AstHeader\">" +
"<SessionId xsi:type=\"xsd:string\">1234567</SessionId>" +
"</AstHeader>" + "</soapenv:Header>" + "<soapenv:Body>" +
"<soap:SelectCmDevice soapenv:encodingStyle=\"http://schemas.xmlsoap.org/soap/encoding/\">" +
"<CmSelectionCriteria xsi:type=\"soap:CmSelectionCriteria\">" +
"<SelectBy xsi:type=\"xsd:string\">Name</SelectBy>" +
"<Status xsi:type=\"xsd:string\">Registered</Status>" +
"<Class xsi:type=\"ns1:DeviceClass\">Phone</Class>" +
"<Model xsi:type=\"xsd:unsignedInt\">255</Model>" +
"<SelectItems>" + "<Item>" + macadd +
"</Item>" + "</SelectItems>" + "</CmSelectionCriteria>" +
"</soap:SelectCmDevice>" + "</soapenv:Body>" +
"</soapenv:Envelope>";
But how can i to get multiple phones in a request? i had tried many methods, but all of them are not work. Thanks for any helps!

Hi msabir:
Thanks for your help. Yea,i don't want to get the first 200 phones, i just want to get the phones which are listed in the items.For example:
"SEP0013192F15DU"+
"SEP000E839C1479"+
"SEP00131A4D3B34"+
"SEP001D450BF4CF"
,then i just want to get the four phones, but when i do like this,i always just got one phone,why is that? Then i changed to use Array like this:
"http://schemas.xmlsoap.org/soap/encoding/\">" +
"" +
"" +
""+
""+
"10"+
"Phone" +
"255" +
"Any" +
"Name" +
"" +
""+
""+
""+
""+
""+
"SEP001D450BF4CE"+
""+
""+
"SEP00131A4D3B34"+
""+
But it alway throws this error:
soapenv:Server.generalExceptionERROR: SelectBy is null
why? Thank you very much!

Anyone having problem with iphone getting not delivered message after sending picture and it really is getting delivered to recipient.

Anyone having problem with iphone getting a not delivered message after sending pic and it really is getting delivered to recipient.

Same problem here with and I've done everything shy of a total reset which I also find unacceptable. This problem exists on all iMessage platforms (iPhone, iPad, and Mac) so I don't see how restoring my iPhone would help the problem.

My iphone 5 everytime i go into mail it comes up with - Cannot get Mail - the connection to the server failed- i then have to click ok - I am still receiving mail - it is driving me mad having to click this everytime - anybody else had the same ?

My iphone 5 everytime i go into mail it comes up with - Cannot get Mail - the connection to the server failed- i then have to click ok - I am still receiving mail - it is driving me mad having to click this everytime - anybody else had the same problem and have found a solution - only stated happening since iPhone was updated .

Hello there, Badboymbc.
The following Knowledge Base article provides some steps for troubleshooting mail on your iOS device:
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Lync integration with Third-Party mail server's

Hi all,
Does Lync integrates with any third party mail servers?
Or it integrates only with Exchange Server?
Regards,
ArunKumar.J

Agree with Thamara. Exchange is the only platform supported for presence as well as voice functionality. The client uses EWS to communicate with the server to check calendar integration, nothing else is going to mimic this properly enough to
avoid issues.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

My Nano will stop playing music after a short bit. I have to push play to get it to start up again. I can't remember the fix.

Help!My Nano will stop playing after a few minutes. I have to push play to get it to start up again. I can not remember the fix.

See here: iPod nano (6th generation): Music stops when display turns off
B-rock

Tried to run a CD I had run with Snow Leopard. Now (with Lion) getting a message that PowerPC applications are no longer supported.. How do I overcome this? Thanks

Tried to run a CD I had run with Snow Leopard. Now (with Lion) getting a message that PowerPC applications are no longer supported.. How do I overcome this? Thanks

Well Lion does not support power PC applications. They only way is to upgrade the application, or if your have SL disks, reinstall SL.

HT1420 i didnt get my app i had bought be cause of an error and the money i bought my idea with didnt get back to the amount before

i didnt get my app i had bought be cause of an error and the money i bought my idea with didnt get back to the amount before

You should be able to download it via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your Mac's iTunes.
If it doesn't show there then was the purchase successful e.g does it show on your purchase history : http://support.apple.com/kb/HT2727 ? If not then it might just be a holding charge, and not a 'proper' purchase charge.
If it does show on your purchase history, but not in Purchased for redownloading, then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com

RTP Media Stream with "Third Party SIP Device" always through CUCM

Hello,
i have i quite strage problem on one of my customers locations:
we have a cucm 7.1.5(SU4) with the cucm in the datacenter. And we have a small location(branch office) which has a small wan connection to the datacenter (1MBit/s).
In this location we have several Kirk (Polycom) Dect phones which register as "Third Party SIP Device - Basic" on the CUCM.
(The problem is the same if i use the X-Lite SIP Client instead)
When this SIP Phones or the X-Lite Client dials a internal Number of the same location the RTP Media Streams goes directly from the SIP Client to the phone. But if they dial an external number the RTP Stream goes from the SIP Client via the wan connection to the CUCM and back via the wan connection to the 2901 H.323 Gateway (on the same location).
and of course if i now start a big download or upload i'm no longe able to complete the phone call because we have no QOS on the wan connection, because we don't want to make calls over this connection.
When i look at the Sniffer files with Wireshark i see that the CUCM sends his own ip adresse in the SDP Header for the RTP Stream to the SIP Client. And this of course is wrong because the RTP Stream should always reside on the branch office.
i tested this in my lab (CUCM 8.5) and it is the same. i used the "Standard SIP Profile" and a Basic Third Party SIP Device"
The SCCP Phones on the same location which are configured with the same Region, Location, Device Pools, Media Resources and which use the same Gateway for external calls do not have this problem.
In the Gateway configuration "MTP Required" is not activated and i tested it in my lab with some Cisco SIP Phones (9971) and they are also not affacted with this problem.
any ideas?

do you have a SIP trunk to the external devices with MTP required checked ?

Lync Push with WP8 getting SIP/2.0 408 Request Timeout

Similar Messages

Maybe you are looking for