Lync Server 2010 Mobility. Server does not call mobile.

Hello all.
We have an infrastructure with Lync Server 2010 SE, Edge Server, ISA.
Everything works fine, Enterprise Voice is enabled and integrated with IP PBX.
Lync 2010 desktop client can call to PSTN without any problem.
But when user logs in to mobile client, iPhone Lync Mobility client for example, server tries to call to users' number but an error occurs, that user is not online, IM works just fine.
The reason is - call goes to trunk in the following format 98XXXXXXX with normalization rules, server tries to call in e.164 format +7XXXXXXXXXX.
Everybody knows how to normalize server calls?

Open Lync Server Control Panel, click Voice Routing and then click Test Voice Routing, enter the dialed number to test with the Dial Plan and Voice Policy assigned to the caller.
Lisa Zheng
TechNet Community Support

Similar Messages

  • Server does not support: RFC 567456 see CVE-2009-3555

    I am running Win 7, with a Netgear wireless dongle (Wn111v2) via a BT HomeHub. Both with latest drivers. Apart from Auto updates from MS & Firefox, no other software newly loaded.
    Recently, Netgear starts with 113 Mbps, then rapidly drops to 1 Mbps. Firefox Error console states: "Server does not support: RFC 567456 see CVE-2009-3555"
    All assistance appreciated. Dan

    That message is meant for webmasters to make them aware that they need to fix their servers.
    Firefox 3.6 versions can detect such a misconfiguration and displays a warning in the "Tools > Error Console".
    See also https://wiki.mozilla.org/Security:Renegotiation
    '''Update Adobe Reader (Adobe PDF Plug-In)'''
    *Check your version: http://www.mozilla.com/en-US/plugincheck/
    **'''Note: plugin check does ont have information to check all versions of all plugins'''
    *'''Another new version of Adobe Reader is schedule for release during the week beginning 2010-08-16 to correct security issues.'''
    Updating Adobe Reader:
    #From within your existing Adobe Reader:
    #*Open the Adobe Reader program from your Programs list
    #*Click Help > Check for Updates
    #Download complete installer:
    #*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below
    #*On the Adobe page, un-check any extra items (i.e. Free McAfee® Security Scan Plus) then click Download button
    #*If you see message just under tabs, DO NOT click the Allow button, instead click below that where it says "click here to download".
    #*Click "Save to File"; save to your desktop
    #*After download completes, close Firefox
    #*Click the installer you just downloaded and allow the install to continue
    #**Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
    #*See: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
    #After the installation, start Firefox and check your version again.

  • Connection Server does not start

    Hello guys,
    The Connection Server does not start anymore.
    When I always try to start it returns me a failed status and shows me that the server is considered failed because it has stopped 5 time(s) in 60 minute(s).
    It's a BOE XI 3.1 SP2 with IK 3.1 SP2 installed on a Windows 2003 Server.
    BO XI database is on a SQL Server and all tables are there and seems to be OK
    The log file for the connectserver via trace is below :
    2010/01/28 19:06:43.339|>>| | | 4524|4528| |||||||||||||||TraceLog::Admin: logdir ('C:/Program Files/Business Objects/BusinessObjects Enterprise 12.0/Logging/')
    2010/01/28 19:06:43.339|>>| | | 4524|4528| |||||||||||||||TraceLog::Admin: update ()
    2010/01/28 19:06:43.339|==| | | 4524|4528| |||||||||||||||TraceBridge::Initialize: pullable set to 1
    2010/01/28 19:06:43.339|==| | | 4524|4528| |||||||||||||||TraceLog state:
    // device_info
    // process        (process#pid)   = ConnectionServer#4524
    // device         (name#deviceid) = ConnectionServer#MainDevice
    // pull/push      (pullable)      = Pull
    // pull mode settings
    //   configfile   (ini)           = C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\Logging\logConfig\BO_trace.ini
    //   every ... s  (period)        = 60
    // config
    active        = true;
    severity      = 'W';
    importance    = '<<';
    keep          = true;
    always_close  = false;
    log_dir       = "C:/Program Files/Business Objects/BusinessObjects Enterprise 12.0/Logging/";
    2010/01/28 19:06:43.402|==| | | 4524|4528| |||||||||||||||SIServerController:run: Fail to initialize or uninitialize.  Reason is The root server reported an error Unknown.:
    2010/01/28 19:06:43.402|==| | | 4524|4544| |||||||||||||||SIServiceStopThread::run: SIServiceStopThread::run exited
    2010/01/28 19:06:43.402|==| | | 4524|4528| |||||||||||||||CsContainer::uninitialize
    2010/01/28 19:06:43.402|==| | | 4524|4528| |||||||||||||||TransientObjectMonitor stopMonitor()...
    .\siserver.cpp:974: TraceLog message 11
    2010/01/28 19:06:43.402|>>|A| | 4524|4528| |||||||||||||||assert failure: (.\siserver.cpp:974). (false : SIServerController::run: Unknown exception caught in server's uninitialization function).
    Any help please?!
    thank you very much.
    Cesar

    Hello,
    I have the same problem (Connection Server does not start).
    I'am under BOXI R2 SP6 (unix) and i have this error in my log when i want to start ConnectionServer :
    Timestamp       ProcessID       ThreadID        Message
    [Fri May  7 07:37:09 2010]      31154   1103673168      Log: level=3 cat=1 msg=35100 p=ConnectionServer started
    [Fri May  7 07:37:09 2010]      31154   1103673168      trace message: SIServerController::run: Before initialize
    [Fri May  7 07:37:09 2010]      31154   1103673168      (sidaemon.cpp:416): trace message: SUNIXDaemon::init: starting
    [Fri May  7 07:37:09 2010]      31154   1103673168      trace message: SUNIXDaemon::init: redirecting stdio to /dev/null
    [Fri May  7 07:37:09 2010]      31154   1103673168      (sidaemon.cpp:209): trace message: installing fg terminiation handler
    [Fri May  7 07:37:09 2010]      31154   1103673168      (sidaemon.cpp:220): trace message: installing abnormal sys handler
    [Fri May  7 07:37:09 2010]      31154   1103673168      (sidaemon.cpp:506): trace message: SUNIXDaemon::init: finished
    [Fri May  7 07:37:09 2010]      31154   1103673168      Log: level=0 cat=14 msg=35101 p=The root server reported an error Unknown.
    [Fri May  7 07:37:09 2010]      31154   1103673168      trace message: SIServerController:run: Fail to initialize or uninitialize.  Reason is The root server reported an error Un
    known.:
    [Fri May  7 07:37:09 2010]      31154   1103673168      trace message: CsContainer::uninitialize
    [Fri May  7 07:37:09 2010]      31154   1103673168      trace message: TransientObjectMonitor stopMonitor()...
    [Fri May  7 07:37:09 2010]      31154   1103673168      Log: level=0 cat=14 msg=35101 p=The root server reported an error Internal Error. (Reason: Unknown exception caught in ser
    ver).
    [Fri May  7 07:37:09 2010]      31154   1103673168      assert failure: (siserver.cpp:953). (false : SIServerController::run: Unknown exception caught in server's uninitializatio
    n function
    [Fri May  7 07:37:09 2010]      31154   1103673168      Log: level=3 cat=1 msg=35100 p=ConnectionServer stopped
    Any idea ?
    Thanks.

  • Problems with Tomcat Server : Does not respond (Sometimes) - Plz Need Help

    I have a web application running on Tomcat 4.1.31. (SUN/Solaris)
    Clients access through iPlanet Web Proxy (SUN/Solaris).
    Theres a class that build a generic form (it return html codes) then it's affected in the JSP page :
    MyClass class = new MyClass();
    <%= class.getHtmlCode() %>
    the size of the form is variable (100Ko to 1,5Mo)
    When i m using the proxy, sometimes the server does not respond when he do the affectation <%= class.getHtmlCode() %>.
    If i call the page without proxy it work.
    The problem seem not depending of the size of the form. Without proxy it always work. And with proxy sometimes the server does not work.
    Please need help

    Originally Posted by scum
    Hey All,
    Need some help with ZDM7 PXE preboot services.
    Currently running a netware 6.5 server in VLAN1
    PXE client sitting in VLAN2.
    DHCP Server is running on VLAN3
    IPHelper is running
    DTS.ini, PDHCP.ini and TFTP.ini are unmodified.
    I have had networks put an IPHelper in place and my client successfully picks up an IP address. The screen displays the "BOOT SERVER IP" correctly and the clients IP details are correct.
    I watch the top of the screen where the Timeout counts down and eventually gives this error.
    "Error: The server did not respond as requested in time
    ZENworks shutting down...
    Press any key to continue..."
    This happens on every machine i have tested. If i hold down the Ctrl+Alt keys, then the imaging menu appears, i can select maintenance and the client will pull down the initrd, etc.. fine.
    if i disable the IPHelper, move the client to the same VLAN as the server, then the whole process works perfectly.
    not sure where to go from here.
    help please ;)
    leon
    Hi Leon,
    If you are getting the ZENworks menu when holding down the Ctrl-Alt keys, PXE/PDHCP seems to be doing the right thing. Routing issues also don't seem the case as you can pull down the first PXE boot files....
    The server running PXE, I assume it also runs the TFTP and Imaging services?
    These services are also running a recent version of Zen 7 (IR3/IR4)? A little more info on these components and what server they are on would be good :)
    Cheers,
    Willem

  • When I attempt to reply or forward email, it says my server does not allow relaying and will not send.

    When I attempt to forward or reply emails. I get the error message that my server does not allow relaying and will not send.

    Some ISPs don't really handle you mail, they pass it off to another pipeline.  That is called relaying.  Some receiving servers will not accept relayed messages, as they are frequently associated with spammers.
    In some cases, I understand aol relays within thier own system, confusing the issue a little.
    Who is you mail provider?  If it is a big name, this should not be an issue.   As a test, if you have an alternate e mail account, like gmail, try to send a message from that account and see if it goes through.

  • ICal error:  Server does not recognize your password

    Today I opened iCal on my iMac and I get an immediate error message saying that the "server does not recognize my password for my user name and says to make sure that it's entered correctly." I went to MobileMe in System Settings and everything was OK. I was able to see it on the MobileMe website but it still gives me the error message when I open iCal.

    Today, I had this exact same issue. What helped was quitting iCal, deleting the cal.me.com password in keychain, starting iCal again, then entering it again in iCal preferences. It started syncing right after that.
    People who don't have the cal.me.com password should check their general mobile me settings.
    Ghostlarke: if you sync your calenders, you ARE using MobileMe.

  • The server does not support the requested critical extension (0x8007202c)

    Hello guys,
    The sympton is the same as the one in "The
    server does not support the requested critical extension." Exception.
    I got the error in calling IDirectorySearch::GetNextRow. As I observe, the error is trigger when retrieving the another page of records. The LDAP path to connect is "GC://<FQDN_of_GC>". The search filter is (&(|(objectClass=group)(objectClass=msExchDynamicDistributionList))(mailnickname=*)).
    There are about 100 thousands of group objects in the forest. So the answer in that thread does not help.
    Any thoughts?
    Thanks.
    [email protected]

    Hi Michael,
    Thanks for your remind of the server is Windows 2008 R2. 
    After deep research on this topic, there were a couple of possible causes. One was based on asking AD to do sorting on the results of the query. Our calls to AD do not do any sorting at all. The other I came to was a couple of pages that may help alleviate
    the problem of groups in large AD environments. It has to deal with the temporary table size that Active Directory uses, with the tunable parameter MaxTempTableSize.
    The articles as below are for your reference:
    http://social.technet.microsoft.com/Forums/en-US/exchangesvradmin/thread/95bfb95f-4e43-4dd8-ac3a-0c89d2cf528e
    http://support.microsoft.com/kb/315071
    http://msdn.microsoft.com/en-us/library/ms677927(VS.85).aspx
    Besides, if the above is not the cause of our issue, there may be something wrong in the C# code. Since I just an AD engineer and not familiar with the C# code, I suggest you should involve one C# code engineer to work with us about this issue. After doing
    many research, please add the class of the object when searching. For example, “DirectorySearcher ds = new DirectorySearcher(de, filter,class)”. I’m not sure if it’s correct, just a suggestion.
    Hope to hear good news from you soon. Happy X'MAS day!
    Best regards,
    Bryan

  • I bought a new imac running Loin and Office 2011. The server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software.

    I bought a new imac running Loin with Office 2011. I am the only mac in the office and the Server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software other than webmail access through our website. It looks as though 2011 is not compatible with 2003 per some searches online, but what are some options I have to gain full access again? I purchased parallels in hopes that this my help and I am able to use remote desktop connection to log on to server but can not drag and drop files I need. There is a shared drive on that Server we all use to exchange files.
    The two main issues are gaining access to my email again and ability to drag and drop files from mac to pc. I hope this is enough info to get some solutions.
    PS - IT person says my iMac's IP is what his server does not understand so that is why I can not login.

    Office 2011 is not compatbile with Exchange 2003.
    I suggest you post further Office related questions on Microsoft's own forums for their Mac software:
    http://answers.microsoft.com/en-us/mac

  • The security database on the server does not have a computer account for this workstation trust relationship

    When I try to log on to my DC it says "The security database on the server does not have a computer account for this workstation trust relationship". It won't let me log on. I installed another server server 2012r2  (its virtual )
    and I can get to ADSI edit. 
    I think what happened was I had a pc that could not connect without unplugging the network cable. So I found this fix 
    FIX: “The security database on the server does not have a computer account for this workstation trust relationship”2032011
    I’ve seen a lot of solutions, or suggestions rather, with regard to the error in the title of this post.  In my experience, the problem can almost always be resolved without extra domain add/removes and reboots, which is the most prevalent solution I have
    seen around.  Usually, this issue is due to a mismatch between attributes of the computer account in Active Directory and those values on the system itself.  Here are the steps I take to fix this issue when it crops up:
    Open up Active Directory Users & Computers pointed to the domain the computer account resides in
    From the “View” pull-down menu, make sure that “Advanced Features” is checked
    Navigate to the part of your organizational unit (OU) structure where the computer account for this server resides
    Open the Properties for the computer object
    Choose the “Attribute Editor” tab on the Properties dialog box
    Check the Attributes dNSHostName & servicePrincipalName – anywhere that a fully qualified hostname is specified (e.g. myserver.mydomainname.com), make sure that the entry matches the hostname
    you have configured when you go here on your server: Start -> Computer -> Right-Click, Properties -> Change Settings (under “Computer name, domain… settings”) -> Full Computer Name
    As an example, for a fictitious W2K8 R2 server whose Full Computer Name is “srv1.mydomainname.com”, these attribute/value pairs should be in Active Directory:
    dNSHostName:
    srv1.mydomainname.com
    servicePrincipalName:
    HOST/SRV1
    HOST/srv1.mydomainname.com
    RestrictedKrbHost/SRV1
    RestrictedKrbHost/srv1.mydomainname.com
    TERMSRV/SRV1
    TERMSRV/srv1.mydomainname.com"
    Not reading it carefully I add a computer with the same name as the pc having the issue and followed the above. The problem is that I did not notice that the spn did not want the name of my server (serv1) but the name of the trouble
    pc.
    dcdiag output
    PS C:\Users\administrator.TOM> dcdiag.exe
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       ***Error: DC3 is not a Directory Server.  Must specify /s:<Directory Server> or  /n:<Naming Context> or nothing to
       use the local machine.
       ERROR: Could not find home server.
    PS C:\Users\administrator.TOM> dcdiag.exe /s:DC2
    Directory Server Diagnosis
    Performing initial setup:
       * Identified AD Forest.
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site\DC2
          Starting test: Connectivity
             The host 9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM could not be resolved to an IP address. Check the DN
             server, DHCP, server name, etc.
             Neither the the server name (DC2.TOM) nor the Guid DNS name (9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM)
             could be resolved by DNS.  Check that the server is up and is registered correctly with the DNS server.
             Got error while checking LDAP and RPC connectivity. Please check your firewall settings.
             ......................... DC2 failed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site\DC2
          Skipping all tests, because server DC2 is not responding to directory service requests.
       Running partition tests on : ForestDnsZones
          Starting test: CheckSDRefDom
             ......................... ForestDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... ForestDnsZones passed test CrossRefValidation
       Running partition tests on : DomainDnsZones
          Starting test: CheckSDRefDom
             ......................... DomainDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... DomainDnsZones passed test CrossRefValidation
       Running partition tests on : Schema
          Starting test: CheckSDRefDom
             ......................... Schema passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Schema passed test CrossRefValidation
       Running partition tests on : Configuration
          Starting test: CheckSDRefDom
             ......................... Configuration passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Configuration passed test CrossRefValidation
       Running partition tests on : TOM
          Starting test: CheckSDRefDom
             ......................... TOM passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... TOM passed test CrossRefValidation
       Running enterprise tests on : TOM
          Starting test: LocatorCheck
             ......................... TOM passed test LocatorCheck
          Starting test: Intersite
             ......................... TOM passed test Intersite
    PS C:\Users\administrator.TOM> regsvr32 schmmgmt.dll
    PS C:\Users\administrator.TOM> netdig /fix
    netdig : The term 'netdig' is not recognized as the name of a cmdlet, function, script file, or operable program.
    Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
    At line:1 char:1
    + netdig /fix
    + ~~~~~~
        + CategoryInfo          : ObjectNotFound: (netdig:String) [], CommandNotFoundException
        + FullyQualifiedErrorId : CommandNotFoundException
    PS C:\Users\administrator.TOM> Setup /PrepareSchema
    Setup : The term 'Setup' is not recognized as the name of a cmdlet, function, script file, or operable program. Check
    the spelling of the name, or if a path was included, verify that the path is correct and try again.
    At line:1 char:1
    + Setup /PrepareSchema
    + ~~~~~
        + CategoryInfo          : ObjectNotFound: (Setup:String) [], CommandNotFoundException
        + FullyQualifiedErrorId : CommandNotFoundException
    PS C:\Users\administrator.TOM> netdiag /test
    netdiag : The term 'netdiag' is not recognized as the name of a cmdlet, function, script file, or operable program.
    Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
    At line:1 char:1
    + netdiag /test
    + ~~~~~~~
        + CategoryInfo          : ObjectNotFound: (netdiag:String) [], CommandNotFoundException
        + FullyQualifiedErrorId : CommandNotFoundException
    PS C:\Users\administrator.TOM> nslooup
    nslooup : The term 'nslooup' is not recognized as the name of a cmdlet, function, script file, or operable program.
    Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
    At line:1 char:1
    + nslooup
    + ~~~~~~~
        + CategoryInfo          : ObjectNotFound: (nslooup:String) [], CommandNotFoundException
        + FullyQualifiedErrorId : CommandNotFoundException
    PS C:\Users\administrator.TOM>

    Ok fixed. 
    At a elevated cmd prompt run ;
    C:\Users\administrator.TOM>setspn -x
    As you can see the DC serv1 had duplicate SPNs.
    Checking domain DC=TOM
    Processing entry 1
    HOST/serv1.TOM is registered on these accounts:
            CN=SERV1,OU=Domain Controllers,DC=TOM
            CN=C00049,CN=Computers,DC=TOM
    {14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/TOWN-HBWJ29ZOQC is registered on these ac
    counts:
            CN=Administrator,CN=Users,DC=TOM
            CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
    {14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/town-hbwj29zoqc.TOM is registered on thes
    e accounts:
            CN=Administrator,CN=Users,DC=TOM
            CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
    RestrictedKrbHost/serv1 is registered on these accounts:
            CN=C00049,CN=Computers,DC=TOM
            CN=SERV1,OU=Domain Controllers,DC=TOM
    RestrictedKrbHost/serv1.TOM is registered on these accounts:
            CN=C00049,CN=Computers,DC=TOM
            CN=SERV1,OU=Domain Controllers,DC=TOM
    found 5 groups of duplicate SPNs.
    Went to the computers OU and changed computer c00049 to the correct SPN. Now I have a new issues, I'll start a new thread.

  • Crstal Report Server does not working on installation of Crystal Design

    Hi,
    I had installed Crystal Report Server 2008 on a machine, I was able to login and open the CMC console as well but on installation of Crystal Desing the CMC and inforview are not opening. its displaying some dll file is missing.
    Kindly inform whether Server does not work after installation of Design on the same machine.
    Thanks & Regards
    PNN  Murthy

    Questions related to ASP.NET should be posted in the ASP.NET forums (http://forums.asp.net ).

  • I suddenly cannot email photos from iphoto. I get a box that says "server does not recognize username or password". I now have to use regular email and cannot re-size my photos.

    Suddenly I can no longer email photos directly via iphoto mail.  The box comes up that says "server does not recognize username or password".  I used to be able to re-size my photos before sending so that they jpeg or pixels were larger for publishing in newspapers or magazines, but I can no longer do that.  Apple tech support told me to change my iphoto "preferences" to using regular email to send.  But that does not allow me to re-size.  Is anyone else having this problem?  I don't know if there was an update that caused this or what?  Please help.

    The box comes up that says "server does not recognize username or password".
    That error message usually will pop up, when there is a conflict between the "From" setting for the mail account you are sending from and the selected outgoing mail server. Probably the outgoing Mail server is receiving a user name and password it does not understand. When the mail returns unsent, do you see the "Try again" panel with the option to select a different outgoing mail server?
    If you do not see this panel, change the Mail "Preferences > General" to "If Outgoing server is unavailable: Show a list of alternate servers". This way, you will know, which server Mail is trying to send from.
    Have you tried to set "From"  pop-up menu to one of your other email addresses?  If that works, change your settings in Mail to always send from this address. You can set this option in the Mail "Preferences > Composing: Send New Messages from". I have my "Send New Messages from" set to "iCloud". That is working best for me with iPhoto.

  • I have an Ipad 2 and are having problems sending out emails in one of my email address. I always get a message reading the email was not sent because the server does not allow relaying. This is an email account POP3. I have no such problem with gmail.

    I have an Ipad 2 and are having problems sending out emails in one of my email address. This is a POP3 email Account? I always get a message reading that the email was not sent because the server does not allow relaying. I have no such problem with gmail. What could be the problem and how do I resolve this. Is it about settings?
    Richard.

    Welcome to the Apple community.
    If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
    The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
    The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
    Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
    Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
    Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

  • I keep getting a popup error message in Ical "server does not recognize name/password

    I keep getting a popup error message in Ical "server does not recognize name/password"  This started after they did the change to Icloud and extended our subcriptions. 
    Tricia

    I guess that the server name is incorrect, then.
    Did it ever work?
    Delete the account, reboot the phone, then add it back and be sure you choose Yahoo as the mail server type. Everthing should then fill in automatically except your user name and password.

  • Connection failed: SQLState:'01000' SQL Server Error:67 [Microsoft]ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()). Connection failed: SQLState:'08001' SQL Server Error:17 [Microsoft]ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist o

    Help,
    setup a new sql server 2012 on a windows 2012r2 server to replace old sql server 2005 on an old windows server 2003 machine.  When i test the ODBC connection locally on the server it works fine, however when i try to connect via windows 7 client machine
    i get the following error:
    Connection failed:
    SQLState:'01000'
    SQL Server Error:67
    [Microsoft]ODBC SQL Server Driver][DBNETLIB]ConnectionOpen
    (Connect()).
    Connection failed:
    SQLState:'08001'
    SQL Server Error:17
    [Microsoft]ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied
    I think it must be a permissions thing, I've turned off the firewall for now and still no difference, 've also made sure remote connection is enabled.  I can connect to the other sql server in studio manager on the new machine however, i can't go do
    the same in the old server, says:
    cannot connect to hbfsqlpro1\hbfsqlpro1
    Additonal information a network related or instance specifc error occured while establising a connection to SQL server.  The server was not found or was not accessible.  Verify that the instance name is correct and that SQL server is configured to
    allow remote connections. (provider:SQL Network Interfaces, error 26 - error locationg server/instance specified) (Microsoft SQL server)
    the instance is def correct, as that is what i use to connect locally on the new machine and what it comes up on the studio manager on the new machine.  STarting to pull my hair out somewhat, i'm sure it's something really simple! 

    Hello,
    You are trying to connect to a named instance. Make sure the SQL Server Browser service is started on the SQL Server computer.
    Make sure TCP/IP is enabled.
    http://msdn.microsoft.com/en-us/library/ms191294(v=sql.110).aspx
    Try to disable Windows Firewall or security software on both, SQL Server instance and client computer.
    Test basic connectivity too. Try to ping from the client computer to the SQL Server computer.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • I cannot copy and paste details from my bank statement into a word document, without the formatting changing.I have a message in my Error console which reads: server does not support RFC 5746, see CVE-2009-3555

    Since transferring data from my desktop to my laptop, i am now having problems copying and pasting details from my bank website in to a word document, the formatting is all over the place. This didnt happen before, when i pasted the details in to the word document the formatting was exactly the same as on the webpage. If I use internet explorer, I dont have this problem, so, I can only assume it has something to do with Firefox. I have checked the "Error console" and I am receiving this message: server does not support RFC 5746, see CVE-2009-3555.

    Maybe:<br />
    Dafizilla Table2Clipboard: https://addons.mozilla.org/firefox/addon/1852

Maybe you are looking for

  • How to make some seperate lines as one paragraph in MS Word2013

    hi friends when i copy & paste a part of a book (for example a paragraph) from .pdf files into MSWord 2013, the paragraph is pasted as separate lines,so i have to manually edit that. it takes long time. i have pasted my problem in following pictures,

  • IMessage trouble with two iPhones and one Apple ID

    Hi, I'm having trouble with iMessage after updating both of my iPhones to iOS 6 and not being able to use iMessage with one of the phones. Some background: -I have two iPhones, one on AT&T in the U.S., and one on NTT DoCoMo in Japan, both with separa

  • SAP SYCLO Work Manager 6.1 Blueprint

    Hi Friends, I am new to syclo, going to implement syclo agentry wm 6.1 for our client in coming days. can anybody give me the tips to create business blueprint template on sap syclo agentry work manager 6.1. Tips on requirement gathering also appreci

  • Insert master data from SEM to BW

    Hi There, I wonder if anyone know, how in a standard way if it is possibile to insert master data from SEM to BW. I am referring in particular to the masterdata of the 0VENDOR. In fact the customer want to input the 0VENDOR Master data directly from

  • Change Mail for Exchange sender name

    Hi, How can I change the sender's name for outgoing emails in Mail for Exchange application? I am using Nokia 5800 Xpress Music. Thank you!