Lync shows wrong available time

We have 1 VIP whose lync shows wrong available time. He works in night hours, so it must say available till 12am .
Pls guide on how to fix this.
Note: i have also attached a pic with this thread for easier reference, thanks!!

Hi Ramkumar,
Lync will take the work hours from your Outlook client. Try changing users working in Outlook.
To change your work days and times in Outlook 2010, do the following:
Open Outlook Calendar and click the File tab.
Click Options.
Click Calendar.
Under Work time,
Under work hours change the Timings.
Once this is done close the both Lync client and outlook. Open outlook Client first and then Lync Clietn
Whenever you see a helpful reply, click on Vote As Helpful & click on Mark As Answer if a post answers your question.

Similar Messages

  • ITunes 9 shows/movies show wrong run time.

    Things were fine with iTunes 8, but ever since installing iTunes 9 I notice almost everything in my movie list shows the wrong run time, usually double what it actually is, and the same shows up on my ipod after syncing it. I am not sure what is causing this, but it's a little annoying. So I was wondering if anyone has some info or a solution? Thanks for any help.

    Attached are screen shots for the menu handling code for good1, bad1, and the launch section of the code for the main.vi.  In the launch code the good1 is in the bottom loop and bad1 is in the upper loop.  Pretty simple stuff, set corresponding led for the case string. If statement to handle code when led is true....
    Another interesting aside, I just remembered that I had the same problem with good3 as bad1until I added the error out indicator as shown in bad1.  Once I added the indicator to good3 it was fine, which is why it was added when I wrote bad1.  I had intended to go back and add it to good1 and good2, but haven't found the time/need.  
    I did have some really elaborate code to catch and display any errors messages in bad1, but I only caught an error once and it was under some strange condition in development mode which I was unable to dupllicate.  Deleted that code in frustration....
    Best Regards,
    ----almac----
    Attachments:
    bad1.JPG ‏16 KB
    Good1.JPG ‏13 KB
    launch.JPG ‏68 KB

  • ICal on my Air  showing wrong month times are off

    iCal on my Air is showing the wrong month on the left month view window and the correct date in the week view. If I want to see the week view for April, I have to select March. Times of events and alarms are also wrong. I just got a reminder for a flight I took yesterday.  Also when I entered times for flights they were entered 4 hours earlier than the actual departure time.  The 11" Air is about 6-8 weeks old.

    see this thread: https://discussions.apple.com/thread/2503871?start=0&tstart=0
    Basically trashing com.apple.iCal.plist resolve the question (Quit iCal before deleting the plist file from library>preferences)

  • Adf.currentDateTime shows wrong date/time

    Hi All,
    i am using the expression "adf.currentDateTime" for one attribute in my VO. My server time is proper but when rendered on page, this field shows the date 9 hrs back.
    Any inputs on this ?
    thnks
    Edited by: in the line of fire on Jun 15, 2011 12:06 PM

    Hi,
    sounds like the timezone setting in the WLS server is messed up. Is this happening with the integrated WLS in JDeveloper or a stand alone (remote) server ? In WLS you can set the timezone in setDomainEnv.cmd or setDomainEnv.sh in WLS_HOME\user_projects\domains\<domain_name>\bin
    (on Windows)
    set JAVA_OPTIONS=%JAVA_OPTIONS% -Duser.timezone=BST
    (on Unix Based OS)
    JAVA_OPTIONS=${JAVA_OPTIONS} -Duser.timezone=BST
    Frank

  • Finder status bar showing wrong available drive space

    The status bar in finder windows is saying that I have more space availible than I actually do.  This problem is not occuring on external drives. Everything from quick look to third party system monitoring apps all show the correct space availible, and the only thing that says otherwise is this finder status bar. 

    Having the same problem here - MacBook Pro (one week old) 10.8.2.  Started up from the "repair disk" and ran disk utility - both repair and fix permissions.  No correction.

  • Is there a feature in iCS that shows only the time scheduled/available on my calendar?

    Is there a filter mode that will mask the content of my schedule and show only
    the time scheduled/available?
    <P>
    This feature, which will be called "free/busy" time, will be included in the
    next major release of iPlanet Calendar Server. There will be an Access Control
    List(ACL) that provides Free/Busy access, as opposed to only Read access.

    Apps are on my iPad and worked fine with iOS 6. When iOS7 was loaded, I can no longer sign in to these two apps using my Apple ID. These apps are on my phone and work fine.  This problem is on on my iPad. 

  • Some fonts stopped showing as available on ID CS3, though at the same time they ARE showing as avail

    Some Adobe fonts stopped showing as available on ID CS3, though at the same time they ARE showing as available on AI CS3. How do I get them to show up so I can select them?

    Modified "computer" to unhide hidden, system files.
    Searched for "InDesign SavedData" and "InDesign Defaults" yet none show up for either.

  • Date In Terminal Shows Wrong Time

    I have a user (iMac Core 2 Duo 2.4GHz, 10.6.7, 6GB RAM) complaining that Entourage is reporting messages being sent/received 5 hours past the actual time. Sure enough, a test message I sent at 2:50 pm shows in her inbox as being sent/received at 7:50 pm. Checked the Date & Time settings in System Preferences, and all looks good & proper. When a file is created or modified, the time reported in Finder is correct. But when I open Terminal and type in the date command, it spits back a time exactly 7 hours in the future -- Fri Sep 30 19:50:33 UTC 2011.
    I've run a permissions cleanup on the drive, and the problem persists. Next step I guess is to trash a few prefs files, but I'm not sure whether doing that will affect the date/time that Terminal is picking up. Anybody have any quick tricks to rectify this issue, or maybe to set the date/time through Terminal?

    Ok, I think I have it fixed, kinda... The above response got me to pushing the time zone setting around the map, and I noticed that what is reported in Terminal didn't always match what I had set in the Preference panel. It seems to be associated with the city that's selected in the "Closest City:" pull-down menu to some degree; originally I had just typed in the local city name (Sioux Falls, SD) as I have on the other ~20 machines on the network. When I set it to Merida, Mexico, Terminal finally reported CDT correctly, and now Terminal (and Entourage) show the correct time.
    So I guess that's just a workaround; still would be nice to fix it for good.

  • FTP created time shows wrong

    Hi everyone
    windows 2012 or windows 2008 if windows ftp created.
    we stored files /folders in it.
    if we view these files through client windows explorer
     client xp:-it shows correct date & time
    for win7 or above shows differnet date & time of system
    although client & server both date & time are correct.
    same if we see through internet explorer through any client machine
    it shows correct date & time. also if we use filezilla client it shows
    correct date & time.
    so what is reason for client machine win7 and above through windows
    explorer to see ftp files shows differnet date & time.
    Pls suggest.

    Hi,
    Please check the Windows 7 Time Zone, if it is same with Windows XP. In addition, Please also try to Update time in Time settings through internet for test.
    Roger Lu
    TechNet Community Support

  • Camera l;ibrary showing wrong time picture taken

    Any idea how i get the z10 to display the correct time my pics where taken on my z10.  It is showing totally different time, but my phone home page and settings are all showing correct current time.  Any ideas??

    katkrc6787 wrote:
    Any idea how i get the z10 to display the correct time my pics where taken on my z10.  It is showing totally different time, but my phone home page and settings are all showing correct current time.  Any ideas??
    Settings - Date and Time - do you have correct Time Zone, is Auto Update Time Zone On, is Set Date and Time Automatically set to On ?.
    Take another picture then check Properties, other pictures may have 2 dates - created and edited.

  • Suggesion required in schedulin sender adapter using availability time plan

    Hi Experts,
    I have to schedule sender JDBC adapter as per below business requirement:
    Every month i have to exclude first 5 days and remaining days adapter has to run till month end.
    I have selected monthly frequency in Availability time plan and provided 5 days as duration. I have selected excluded option to stop adapter for first 5 days. I have checked the communication channel monitoring, communication channel status is showing stop after 5th day also.
    Please suggest me in this regard. What ever i have done is correct or do i need to change the settings in availability time plan??
    Regards,
    Bhuvan.

    Answer: Pick Availability Time  Daily and select start series and end series date as needed.. Same date for Availability times from and to.
    Click display and then check the dates you dont need (i.e first five days) and click exclude. That's it.
    >>When you pick monthly, it means the schedule is once in a month. --- Wrong
    Edited by: Baskar Gopal on Mar 11, 2011 2:39 PM

  • Lenovo Solution Center Showing Wrong Warranty

    I bought my Lenovo G500 laptop in December 2013. It has 1 year warranty. Today I installed Lenovo Solution Center and saw that it shows wrong warranty. 
    According to Lenovo Solution Center, the warranty is set to expire on September 22, 2014. But its wrong since I bought the laptop just around Christmas in 2013.
    Solved!
    Go to Solution.

    Hi Mayank,
    Welcome to Lenovo Community Forums!
    There was an initial bug in LSC where extended warranty was not accurately shown and this was addressed in version 1.1.006.  Several changes to the functionality of warranty lookup have been implemented in different versions of LSC to address other considerations.
    In some cases, the Lenovo Solution Center is displaying a message, “Unable to determine warranty”, for the System and displaying a message, “not available”, for the Battery. 
    This could occur on any Lenovo system running Windows 7 or 8 and running LSC.
    These will be solved in version 2.0.018 or higher of LSC.
    Warranty status can be checked on the Lenovo support site at any time:
    http://support.lenovo.com/en_IN/product-service/wa​rranty-status/default.page?
    Do post us back for further queries.
    Best Regards
    Shiva Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • [SOLVED] stellarium showing wrong objects positions

    just stellarium showing wrong things, like the location or time are wrong...
    i discover stellarium long time ago but i barely uses it, some time ago i remember that i see the moon in it and looking outside i can see the moon too! it was awesome, lately i noticed that the objects that i see in the program, say the moon, the sun, are not in the correct "place" for example right now here in argentina time is 08:40am and i see the sun like it was near midday, and i can say that now the moon never shows where it needs to be
    I've set localtime to UTC when i installed arch, but i remember one time setting it to localtime and back to UTC but not remember why, besides i dont know the diference...
    here's my rc.conf
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # HARDWARECLOCK: set to "UTC" or "localtime"
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_US.utf8"
    HARDWARECLOCK="UTC"
    TIMEZONE="America/Buenos Aires"
    KEYMAP="es"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # Scan hardware and load required modules at bootup
    MOD_AUTOLOAD="yes"
    # Module Blacklist - modules in this list will never be loaded by udev
    MOD_BLACKLIST=()
    # Modules to load at boot-up (in this order)
    # - prefix a module with a ! to blacklist it
    MODULES=(r8169 slhc snd-mixer-oss snd-pcm-oss snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore kqemu loop)
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    HOSTNAME="aleyscha"
    # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available
    # interfaces.
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    # - prefix an entry in INTERFACES with a ! to disable it
    # - no hyphens in your interface names - Bash doesn't like it
    # Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
    lo="lo 127.0.0.1"
    eth0="dhcp"
    INTERFACES=(lo eth0)
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    # - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 192.168.0.1"
    ROUTES=(!gateway)
    # Enable these network profiles at boot-up. These are only useful
    # if you happen to need multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network-profiles
    #NET_PROFILES=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    DAEMONS=(syslog-ng iptables network netfs crond autofs fuse @fam @hal @alsa @clamav @avahi-daemon @gpm @sensors !postfix)
    # End of file
    B
    Last edited by leo2501 (2008-10-15 03:07:04)

    Just in case: Did you set your location correctly in stellarium? I noticed that the new version (0.10) reseted the settings.
    BTW. UTC is time in GMT (e.g. London, England) and localtime is time wherever you are (Argentila I guess). If your clock is set to localtime and settings are for UTC it could be cause of your problems.
    Last edited by jase (2008-10-13 07:02:16)

  • Make Lync User Always Available

    I want to make a Lync user always available even if he's not signed in using Lync client, is there a way to do that? by using a simple command, change SQL attribute or having a 3rd party app?

    Hi,
    how about stopping the snom from reporting its status as "AWAY"? Please note it must report "AWAY" per default after a certain
    time of inactivity, but you can change this.
    Please review:
    http://wiki.snom.com/Settings/away_timeout and
    http://wiki.snom.com/wiki/index.php/Settings/inactive_timeout
    You will find both settings in the snom phone webinterface under PREFERENCES / Status
    Show status inactive after this many minutes (0 = never):
    Show status away after this many minutes (0 = never):
    Feel free to change both values e.g. to 0 and see if it fits your need.
    Thanks and greetings from Berlin,
    Jan
    Jan Boguslawski | Technical Product Manager - snom OCS / UC Edition | MCITP: EA, MCITP & MCTS: LYNC, MCTS: EXCHANGE | snom technology AG, Berlin | www.snom.com | http://ocsphoneguy.blogspot.com

  • LR 5.3 showing wrong thumbnails

    I have been running LR 5.3 smoothly for a while but a couple of minutes ago LR started to show wrong thumbnails, it shows thumbnails from a delete Snapshot. I have tried purging my cache but nothing happens. I have upgraded from LR 3 to LR 3.5  Ideas ? This is my system:
    Lightroom version: 5.3 [938183]
    Operating system: Windows 7 Home Premium Edition
    Version: 6.1 [7601]
    Application architecture: x64
    System architecture: x64
    Logical processor count: 2
    Processor speed: 1.9 GHz
    Built-in memory: 3003.1 MB
    Real memory available to Lightroom: 3003.1 MB
    Real memory used by Lightroom: 912.9 MB (30.4%)
    Virtual memory used by Lightroom: 901.7 MB
    Memory cache size: 364.0 MB
    Maximum thread count used by Camera Raw: 2
    System DPI setting: 96 DPI
    Desktop composition enabled: Yes
    Displays: 1) 1366x768
    Application folder: C:\Program Files\Adobe\Adobe Photoshop Lightroom 5.3
    Library Path: C:\Users\User\Pictures\Lightroom\Lightroom 5 Catalog.lrcat
    Settings Folder: C:\Users\User\AppData\Roaming\Adobe\Lightroom
    Installed Plugins:
    1) 500px
    2) Behance
    3) Canon Tether Plugin
    4) Facebook
    5) Flickr
    6) Leica Tether Plugin
    7) Nikon Tether Plugin
    8) SmugMug
    Config.lua flags: None
    Adapter #1: Vendor : 8086
        Device : 2a42
        Subsystem : 360b103c
        Revision : 7
        Video Memory : 64
    AudioDeviceIOBlockSize: 1024
    AudioDeviceName: Speakers (Conexant High Definition SmartAudio 221)
    AudioDeviceNumberOfChannels: 2
    AudioDeviceSampleRate: 44100
    Build: LR5x89
    CardID: 10818
    Direct2DEnabled: false
    GPUDevice: D3D
    MaxTexture2DSize: 8192
    OGLEnabled: true
    Renderer: Mobile Intel(R) 4 Series Express Chipset Family
    ShaderModel: 10.0
    Vendor: Intel
    VendorID: 32902
    Version: 8086:2a42:360b103c:0007

    I have had this problem also ever since I updated to 5.3,  I think it is a major bug!
    At random the preview window on the left doesnt show the preview of the presets anymore when I hover them, and when I click back and forth to other images it suddenly starts working again, its a very annoying problem and I cannot believe that Adobe isnt aware of it yet!
    Marcel

Maybe you are looking for