LYNC update not showing up in WSUS Console.

I want to update my Lync Clients to latest patch via WSUS3.
Selected Lync 2010 for sync.but it doesnt show up in WSUS Console.
Tried removing filters also.
Pls. help
Abhijeet Kasurde KPIT Cummins Infosystems Ltd.

Hi,Abhijeet,
Would you please go to client policy in your Lync control panel and verify that you have set "Allow and update" in the Action drop-down menu for the latest version of Lync client.
Details you can check
http://technet.microsoft.com/en-us/library/gg182591.aspx
Regards,
Sharon
Sharon Shen
TechNet Community Support
***************************************************************************************************************************************************************************** Please remember to click “Mark as Answer” on the post that helps you, and to click
“Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial t

Similar Messages

Error installing CS5 updates; Some updates not showing up.

When I select a photo in lightroom 5 and opt to edit it in photoshop, I get a notification that says "This version of Lightroom may require the Photoshop Camera Raw plug-in version 8.3 for full compatibility. Pleas update the Camera Raw plug-in using the update tool available in the Photoshop help menu."
Upon entering photoshop and opening the update tool, there are two updates, but neither for the Camera Raw plug-in. I went ahead and tried to update those anyway, and at the end, I got two error messages reading "There was an error downloading this update. Please quit and try again later." and "Installation failed." The updates were for Adobe Extension Manager CS5 5.0 and Adobe Device Central CS5.0.1, respectively.
My question has two parts. First, how can I work around these error messages and successfully install the updates, and second, why is the Camera Raw plug-in update not showing up? Thanks in advance!
Below are screenshots of the Lightroom message and the update error messages.

What updates should have been available, and
Why were they not available at that time?
Lets examine the case of the backup that has been on the shelf a while.
I really would like to help, but this post does not really answer my two questions. If you want to troubleshoot this scenario, we're going to need some HARD information to work with.
WSUS reported (updates needed report) that there were 90+ updates available and approved for that machine
The computer reporded that there were no updates available.
My first eyebrow-raising moment here is the idea that a computer has 90+ updates
approved and available (and, ostensibly, cannot find any of them to be downloaded), and my very first question in response to raising that eyebrow is this: And all 90+ of those updates are NOT SUPERSEDED??? To which my second question would be: When
was the last time that machine had patches installed?
I took a look at another computer in the same OU and computer update group with the same initial install image and I see 12 updates available, all not yet approved for that group.
If the updates are Not Approved, then those updates are also Not Available.
I'll also point out here that the best way to approach this scenario is to believe what you see and investigate the reason why, rather than questioning the veracity of what's displayed in the console or the logs.
If the client says there are no updates available for installation, then that's the bottom line, and the proper response is to identify an update that
should be available for installation and determine why it's not being downloaded/installed.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Computer not showing up in wsus

i got a machine that is not showing up in wsus
in the windowsupdate log I found this. any idea what is wrong?
2014-07-09 16:22:53:583
376 c60
AU Triggering Online detection (non-interactive)
2014-07-09 16:22:53:583
376 1110
AU #############
2014-07-09 16:22:53:583
376 1110
AU ## START ## AU: Search for updates
2014-07-09 16:22:53:583
376 1110
AU #########
2014-07-09 16:22:53:584
376 1110
AU <<## SUBMITTED ## AU: Search for updates [CallId = {BFDC2FF6-051C-404E-8A42-74F01AB1B92D}]
2014-07-09 16:22:53:604
376 1280
Agent *************
2014-07-09 16:22:53:604
376 1280
Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-07-09 16:22:53:604
376 1280
Agent *********
2014-07-09 16:22:53:604
376 1280
Agent * Online = Yes; Ignore download priority = No
2014-07-09 16:22:53:604
376 1280
Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-07-09 16:22:53:604
376 1280
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-07-09 16:22:53:604
376 1280
Agent * Search Scope = {Machine}
2014-07-09 16:22:53:604
376 1280
Setup Checking for agent SelfUpdate
2014-07-09 16:22:53:605
376 1280
Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2014-07-09 16:22:53:605
376 1280
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-07-09 16:22:53:613
376 1280
Misc Microsoft signed: Yes
2014-07-09 16:22:56:200
376 1280
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-07-09 16:22:56:207
376 1280
Misc Microsoft signed: Yes
2014-07-09 16:22:56:210
376 1280
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-07-09 16:22:56:217
376 1280
Misc Microsoft signed: Yes
2014-07-09 16:22:56:219
376 1280
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-07-09 16:22:56:227
376 1280
Misc Microsoft signed: Yes
2014-07-09 16:22:56:244
376 1280
Setup Determining whether a new setup handler needs to be downloaded
2014-07-09 16:22:56:244
376 1280
Setup SelfUpdate handler is not found. It will be downloaded
2014-07-09 16:22:56:244
376 1280
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256"
2014-07-09 16:22:56:247
376 1280
Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2014-07-09 16:22:56:247
376 1280
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2014-07-09 16:22:56:266
376 1280
Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2014-07-09 16:22:56:266
376 1280
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2014-07-09 16:22:56:290
376 1280
Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2014-07-09 16:22:56:290
376 1280
Setup SelfUpdate check completed. SelfUpdate is NOT required.
2014-07-09 16:22:56:918
376 1280
PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-07-09 16:22:56:918
376 1280
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://wsus2012:8530/ClientWebService/client.asmx
2014-07-09 16:22:56:924
376 1280
PT Initializing simple targeting cookie, clientId = 67e34bc0-db8a-4177-b3f5-31fbf7e87c27, target group = phase1, DNS name = wsgrm58-mjfrah1.domain.com
2014-07-09 16:22:56:924
376 1280
PT Server URL = http://wsus2012:8530/SimpleAuthWebService/SimpleAuth.asmx
2014-07-09 16:22:57:823
376 1280
PT WARNING: SyncUpdates failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
2014-07-09 16:22:57:823
376 1280
PT WARNING: SOAP Fault: 0x00012c
2014-07-09 16:22:57:823
376 1280
PT WARNING: faultstring:Fault occurred
2014-07-09 16:22:57:823
376 1280
PT WARNING: ErrorCode:RegistrationRequired(3)
2014-07-09 16:22:57:823
376 1280
PT WARNING: Message:need to call RegisterComputer.
2014-07-09 16:22:57:823
376 1280
PT WARNING: Method:"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/SyncUpdates"
2014-07-09 16:22:57:823
376 1280
PT WARNING: ID:9cd5f589-ebc3-4100-86dc-8d1dc849e5e5
2014-07-09 16:22:57:831
376 1280
PT Initializing simple targeting cookie, clientId = 67e34bc0-db8a-4177-b3f5-31fbf7e87c27, target group = phase1, DNS name = wsgrm58-mjfrah1.domain.com
2014-07-09 16:22:57:831
376 1280
PT Server URL = http://wsus2012:8530/SimpleAuthWebService/SimpleAuth.asmx
2014-07-09 16:23:01:583
376 1280
Agent WARNING: Failed to evaluate Installed rule, updateId = {189A8F50-0C3A-4FDF-8BC2-BC23A3EB11FB}.101, hr = 80242013
2014-07-09 16:23:03:702
376 1280
PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2014-07-09 16:23:03:703
376 1280
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://wsus2012:8530/ClientWebService/client.asmx
2014-07-09 16:23:04:668
376 1280
Agent * Found 0 updates and 74 categories in search; evaluated appl. rules of 1087 out of 1779 deployed entities
2014-07-09 16:23:04:669
376 1280
Agent *********
2014-07-09 16:23:04:669
376 1280
Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-07-09 16:23:04:669
376 1280
Agent *************
2014-07-09 16:23:04:692
376 bd8
AU >>## RESUMED ## AU: Search for updates [CallId = {BFDC2FF6-051C-404E-8A42-74F01AB1B92D}]
2014-07-09 16:23:04:692
376 bd8
AU # 0 updates detected
2014-07-09 16:23:04:692
376 bd8
AU #########
2014-07-09 16:23:04:692
376 bd8
AU ## END ## AU: Search for updates [CallId = {BFDC2FF6-051C-404E-8A42-74F01AB1B92D}]
2014-07-09 16:23:04:692
376 bd8
AU #############
2014-07-09 16:23:04:692
376 bd8
AU Successfully wrote event for AU health state:0
2014-07-09 16:23:04:692
376 bd8
AU Featured notifications is disabled.
2014-07-09 16:23:04:693
376 bd8
AU AU setting next detection timeout to 2014-07-10 00:14:20
2014-07-09 16:23:04:693
376 bd8
AU Setting AU scheduled install time to 2014-07-10 08:00:00
2014-07-09 16:23:04:693
376 bd8
AU Successfully wrote event for AU health state:0
2014-07-09 16:23:04:694
376 bd8
AU Successfully wrote event for AU health state:0
2014-07-09 16:23:04:694
376 1280
Report CWERReporter finishing event handling. (00000000)
2014-07-09 16:23:07:458
376 1280
Report REPORT EVENT: {19C1C33B-F2ED-4170-BFEC-8124CAA75647}
2014-07-09 16:23:04:668-0700 1
147 101
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Software Synchronization
Windows Update Client successfully detected 0 updates.
2014-07-09 16:23:07:458
376 1280
Report REPORT EVENT: {EA50BC59-3EAD-4DD7-B2BD-A18BE5CC8154}
2014-07-09 16:23:04:668-0700 1
156 101
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Pre-Deployment Check
Reporting client status.
2014-07-09 16:23:07:461
376 1280
Report CWERReporter finishing event handling. (00000000)
2014-07-09 16:23:07:472
376 1280
Report Uploading 2 events using cached cookie, reporting URL = http://wsus2012:8530/ReportingWebService/ReportingWebService.asmx
2014-07-09 16:23:07:475
376 1280
Report Reporter successfully uploaded 2 events.

2014-07-09 16:23:01:583 376 1280 Agent WARNING: Failed to evaluate Installed rule, updateId = {189A8F50-0C3A-4FDF-8BC2-BC23A3EB11FB}.101, hr = 80242013
Please DECLINE the Internet Explorer 9 Irish Language Pack for Windows 7 x64 update and try again.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Why is the software update not showing up in general settings?

Why does my software update not show up in general settings?

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

11.0.3 update not showing up in software update.

I am currently running itunes 11.0.2 on OS X 10.8.3. Checking for an upate for itunes from within the app indicates an update is available. Choosing to download it brings up the app store. App store checks and retruns that no updates are available. Any ideas? I guess I could go ahead and download the install image for 11.0.3. Just curious why it isn't showing up.
thanks.

see:
software update not showing updates

All apps need to update not showing in iTunes

All apps need to update not showing in iTunes. For example, 50 apps need to update. On section "Updates" shows only 10 programs. If you click on the "Update all programs" is updating all 50 programs. Last version of iTunes (11.1.5) installed.

On your MacBook yes, but not on another device. That should take place when your phone syncs with your iTunes. I wonder if what you are observing is due to the fact that you have turned off Wi-Fi syncing with your phone. Connect the phone to iTunes with the USB cable, select the summary tab and ensure that the option to sync over Wi-Fi is checked.

Computers are not showing up in WSUS admin console

I have just deployed WSUS 3.2 on Server 2012 R2. All my client computers are Server 2012 R2 as well. I configured all the settings via the default domain GPO to point to my WSUS server and when I check the reg settings on any of the clients I see all the
settings I configured in the GPO are being pushed down. But when I go to the All Computers in the WSUS console there are no clients showing up. At first I thought it had to do with the port number not being in the Specify Intranet Microsoft update service
location all I had was the server name. I then changed it to 'servername:8530' and that change got pushed down but still no clients show up in the Computer's section in the WSUS admin console.
Is there something I should check or may be missing here?
Thanks

Thanks for the help. Below is the windowsupdate.log file. I stopped the update service renamed the old log file and let it create a new one.
2015-01-06 13:40:14:038
720 218c
Misc =========== Logging initialized (build: 7.9.9600.17415, tz: -0500) ===========
2015-01-06 13:40:14:038
720 218c
Misc = Process: C:\Windows\system32\svchost.exe
2015-01-06 13:40:14:038
720 218c
Misc = Module: c:\windows\system32\wuaueng.dll
2015-01-06 13:40:14:038
720 218c
Service *************
2015-01-06 13:40:14:038
720 218c
Service ** START ** Service: Service startup
2015-01-06 13:40:14:038
720 218c
Service *********
2015-01-06 13:40:14:069
720 218c
IdleTmr Non-AoAc machine. Aoac operations will be ignored.
2015-01-06 13:40:14:069
720 218c
Agent * WU client version 7.9.9600.17415
2015-01-06 13:40:14:069
720 218c
Agent WARNING: SleepStudyTracker: Machine is non-AOAC. Sleep study tracker disabled.
2015-01-06 13:40:14:069
720 218c
Agent * Base directory: C:\Windows\SoftwareDistribution
2015-01-06 13:40:14:069
720 218c
Agent * Access type: No proxy
2015-01-06 13:40:14:069
720 218c
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2015-01-06 13:40:14:069
720 218c
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 2.
2015-01-06 13:40:14:069
720 218c
Agent * Network state: Connected
2015-01-06 13:40:14:085
720 218c
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2015-01-06 13:40:14:085
720 218c
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 2.
2015-01-06 13:40:14:116
720 218c
Agent *********** Agent: Initializing global settings cache ***********
2015-01-06 13:40:14:116
720 218c
Agent * Endpoint Provider: 00000000-0000-0000-0000-000000000000
2015-01-06 13:40:14:116
720 218c
Agent * WSUS server: IADWSUS01:8530
2015-01-06 13:40:14:116
720 218c
Agent * WSUS status server: IADWSUS01:8530
2015-01-06 13:40:14:116
720 218c
Agent * Target group: (Unassigned Computers)
2015-01-06 13:40:14:116
720 218c
Agent * Windows Update access disabled: No
2015-01-06 13:40:14:116
720 218c
Misc WARNING: Network Cost is assumed to be not supported as something failed with trying to get handles to wcmapi.dll
2015-01-06 13:40:14:116
720 218c
WuTask WuTaskManager delay initialize completed successfully..
2015-01-06 13:40:14:116
720 218c
AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2015-01-06 23:16:19, not idle-only, not network-only
2015-01-06 13:40:14:116
720 218c
AU Timer: 143FB093-8AA1-4DBC-A582-8806F8F4C1F7, Expires 2015-01-07 22:13:54, not idle-only, not network-only
2015-01-06 13:40:14:116
720 218c
AU Timer: CF1ABEC6-7887-4964-BB93-B2E21B31CEC1, Expires 2015-01-07 15:10:18, not idle-only, not network-only
2015-01-06 13:40:14:116
720 218c
AU Timer: 29A863E7-8609-4D1E-B7CD-5668F857F1DB, Expires 2015-01-07 15:10:01, not idle-only, not network-only
2015-01-06 13:40:14:132
720 218c
Report WARNING: CSerializationHelper:: InitSerialize failed : 0x80070002
2015-01-06 13:40:14:132
720 218c
Report CWERReporter::Init succeeded
2015-01-06 13:40:14:132
720 218c
Agent *********** Agent: Initializing Windows Update Agent ***********
2015-01-06 13:40:14:132
720 218c
DnldMgr Download manager restoring 0 downloads
2015-01-06 13:40:14:132
720 218c
AU ########### AU: Initializing Automatic Updates ###########
2015-01-06 13:40:14:148
720 218c
AU Additional Service {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782} with Approval type {Pre-download notify} added to AU services list
2015-01-06 13:40:14:148
720 218c
AU AIR Mode is disabled
2015-01-06 13:40:14:148
720 218c
AU # Policy Driven Provider: IADWSUS01:8530
2015-01-06 13:40:14:148
720 218c
AU # Detection frequency: 22
2015-01-06 13:40:14:148
720 218c
AU # Approval type: Pre-install notify (Policy)
2015-01-06 13:40:14:148
720 218c
AU # Auto-install minor updates: No (User preference)
2015-01-06 13:40:14:148
720 218c
AU # ServiceTypeDefault: Service 117CAB2D-82B1-4B5A-A08C-4D62DBEE7782 Approval type: (Pre-download notify)
2015-01-06 13:40:14:148
720 218c
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2015-01-06 13:40:14:148
720 218c
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 1, GetLastError=2250
2015-01-06 13:40:14:148
720 218c
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 3, GetLastError=2250
2015-01-06 13:40:14:148
720 218c
AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80240037
2015-01-06 13:40:14:148
720 218c
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2015-01-06 13:40:14:163
720 218c
AU AU finished delayed initialization
2015-01-06 13:40:14:163
720 218c
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2015-01-06 13:40:14:163
720 218c
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2015-01-06 13:40:14:163
720 218c
AU Adding timer:
2015-01-06 13:40:14:163
720 218c
AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2015-01-06 23:16:19, not idle-only, not network-only
2015-01-06 13:40:14:163
720 1b9c
DnldMgr Asking handlers to reconcile their sandboxes

IE update not showing in software update in sccm2007

I am trying to find IE update in SCCM 2007 but not showing. but other updates showing
EX: MS14-021 This update showing in WSUS but not in SCCM console. I checked WSUSSYNC log and WCM log, not getting any error. Kindly help me. (update rollup and necessary OS checked in configuration).

if you don't get any error in wsyncmgr.log you should have the update in sccm.
Try a sync again if no errors occurs the updates should be in the console.

Windows 8.1 not showing up in WSUS 3.0 SP2 Windows 2003

As the title says really, all Windows 7 etc work a treat, but any Windows 8.1 are not showing...
Any ideas peeps?
many thanks
Kev

Am 04.09.2014 schrieb kevin_cambs_uk:
As the title says really, all Windows 7 etc work a treat, but any Windows 8.1 are not showing...
Get they W8.1 Clients the same GPO Settings like the W7 Clients? Pls
verify the sttings direct on the W8.1 Clients. If the settings are
there, pls look in %windir%\WindowsUpdate.log for Errormessages.
Servus
Winfried
Gruppenrichtlinien
WSUS Package Publisher
HowTos zum WSUS Package Publisher
NNTP-Bridge für MS-Foren

Free Lion update not showing in purchases in App store.

Hi I have just bought a new I mac. I want the Lion update so went to the up to date program page and entered in the information required. Lion sucessfully purchased although is not showing in the purchases tab of the app store. I have checked my order history and it is there... I would really appreciate any help as I would like to upgrade to Lion before I start messing around with my mac.

I filled out the form for the Free Lion upgrade. I would then assume that I would go into app store and be able to download it but it hasn't appeared in the purchased tab. I had just setup my time capsule and the settings were wrong so my connection was intermittent. I possibly missed something during the process. I checked my order history and the free upgrade is there, I will be contacting mac app store tomorrow.

2014.1 App Updates Not Showing Up in Creative Cloud

Hi,
Not all the 2014.1 App updates showed up in my Creative Cloud Application: only Dreamweaver 2014.1 and Edge Animate 2014.1 showed up. I've installed the Application Update for the Creative Cloud App, restarted the app, and no success. I've quit and relaunched the app. They don't show up.
MacBook Pro
Retina, 15-inch, Late 2013
Software OS X 10.9.5 (13F34)
Any assistance would be appreciated.
Thanks,
A.

Hi amcallisterocad,
We would like to inform you that application except Dreamweaver, Edge Animate, and Muse would not show version as CC 2014.1 in Creative Cloud desktop app. However, if you go in the app menu then about app, you should see latest build there.
Eg.
Launch Photoshop.
Go to Photoshop menu> About Photoshop.
Check the build there.
Please let us know if there is anything else that we can be of help to you.
Thanks,
Atul Saini

ATV2 update / not show up in iTunes devices

Hi all of you who already are enjoying the update.
Does anyone can tell me whether the upgrade took care of the old, widespread problem of ATV not showing up or dropping from the device list in iTunes?

I left my iTunes 7.6 sync'ing overnight and throughout the day. ATV2 (MacOS 10.5.1) seems to sync much much slower than AVT1 with 10.5.2.
Anyhow, I returned from work with iTunes in some 'crashed' state: it was responsive, but the itunes store was full of incomplete images and the browse views were incorrect. No devices listed.
I went to turn on my TV connected with ATV2 to find that ATV2 then seems to flicker (renegotiate tv resolution) three times before displaying video. ATV1 did NOT do this. I recall when this (renegotiate tv resolution last night) it resulted in ATV2 reboot (eg, 'sea-of-video' movie playing) on two separate occasions. Does that mean ATV2 needs my 'energy-hog' plasma TV on the whole time while sync'ing?!?! ATV1 did not have this problem!
Then, there were no sync status on ATV2. I returned to reboot iTunes 7.6 to find that it started to sync with ATV2 and then 'devices' not listed. But, ATV2 is busy 'copying' files. When I returned to iTunes 7.6, it seems to 'restart' the sync'ing of the files ATV2 was just copying.
I'm really confused as to what the heck ATV2 is now doing with iTunes 7.6. I'm using the 'default' automatic setting ... I though of giving Apple the 'freshman try' before taking over.
ps I'm also noticing that most of the 'album/preview/poster' are is missing on ATV2 but available while on ATV1. Anyone else notices that?

ESB Services nor Default System not showing up in ESB console

We are running SOA Suite 10.1.3.1 and the services within the ESB console are not showing up immediately after logging into the console. I have verified that the credentials
within the esb_paramater table are correct. We have also increased the amount of max cursors on the DB. Is there something else
that we can try to get those services up and running?
Edited by: user5529739 on Jun 11, 2009 9:50 AM

So you can ping and nslookup from your ms to these agents and vice versa right? I wouldn't do a manual install, I would push the agent from the management server. You can uninstall the agent manually, or use cleanmom to get rid of them. Then
do an install from the console. When you initiate the install from the console (management server), should it run into any issues it will dump out an error which will give you an idea of where the problem may be.
From Holmans post on this:
e MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
The MOM Server could not execute WMI Query "(null)” on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access. If Windows 2008 firewall is enabled, ensure “Remote Administration (RPC)” rule is enabled/allowed. We need port 135 (RPC) and the DCOM port range opened for console push through a firewall.
3. Inspect WMI service, health, and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

10.5.7 Update not showing in Installed Updates log

Hello everyone!
Not sure if this is some type of problem or not but I'm checking with you guys before I do something drastic like reinstall Leopard or something.
I installed the 10.5.7 update yesterday on my iBook G4. After I installed it, the computer hanged only showing my desktop and dock (no menu bar). After a while, I manually powered off the iBook, turned it on and saw it boot, restart, and boot back up. I updated Safari 4 beta after that. Then I checked the Installed Updates log on System Preferences and it showed the Safari update but not the 10.5.7 update. I thought there might be something wrong so I downloaded the Combo Update, repaired permissions and installed the update again. No hang this time, it restarted but it did do that boot-restart-boot again thing again. Tried it twice now and the 10.5.7 update is still not showing in the Installed Updates log even though in About This Mac it does say I'm running 10.5.7.
Is that normal? Are others having this issue?

Suggest you read my tip at
http://discussions.apple.com/thread.jspa?threadID=2004922&tstart=0
on how to get 10.5.7 to display in you installed updates
System Preferences/Software Update/Installed Updates

AT350-T16 Jelly Bean Update not showing up

I just purchased a Excite 10 on the premise that it had jelly bean. However upon turning on its only 4.0.3. I tried to update to 4.1 but the update does not show up. Is there an update for a AT300/AT350-T16 or not?

There should be, yes. You may want to contact customer support at (800) 457-7777.
- Peter

LYNC update not showing up in WSUS Console.

Similar Messages

Maybe you are looking for