Lync2013 Best Practices Analyzer can not scan the edge server details

Hi All,
I encount one strange question that the Lync 2013 Best Practices Analyzer tool can find there's one edge server in the lync infrastructure when scanning, but the scan result does not display the edge server details as front end server (front end server can
scan all details like hardware CPU, fqdn and so on. But the edge server has not)
Anyone can help, much appreciated.
Elva

It seems a network issue.
You should check you have the proper network access to Lync Edge Server as Lync Edge Server is not in the same subnet of Lync Front End Server.
Lisa Zheng
TechNet Community Support

Similar Messages

Credit card number change, your company can not charge , so , what can I do ?because I buy one year plan , but the plan stop already ,I can not change the credit card details.So, I need to buy one more year or can continous the paln with changing the cre

credit card number change, your company can not charge , so , what can I do ?because I buy one year plan ,
but the plan stop already ,I can not change the credit card details.
So, I need to buy one more year or can continous the paln with changing the credit number?

Hello pen pang,
if your Photoshop is a part of Creative Cloud you can use "Manage your membership and payments|Creative Cloud" at
http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html >>>
Payment & credit card >>> Help changing the credit card on your account >>> from there see what hints are listed.
On the other hand I'm sure that you can use the recommended procedure with a "normal" PS too.
If necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use the chat, I had the best experiences. I quote from Adobe's employee Preran: The chat button is activated as soon as there is an agent available to help.
If you need these explanations in another language, please use "Change" at the end/bottom of the website from above
Good luck!
Hans-Günter

Can not specify the SMTP server port, username and password for my SharePoint 2013 web application

We have our SMTP server under port number 141 and we should add username and password. but inside SharePoint 2013, I can only define the SMTP server name , from email, reply-to . But there are not fields to define the port number , the username and password.
So can anyone advice from where I can define the port number and other field settings for the SMTP server ?
Thanks

i am no sure about user name and password. i never saw that option.
check this guide:
http://blogs.technet.com/b/tirumals/archive/2012/03/17/step-by-step-configuration-of-outgoing-emails-from-sharepoint-to-microsoft-online.aspx
http://blog.fpweb.net/configuring-an-smtp-server-for-sharepoint/#.UuANoxAo6M8
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog
thanks for the reply, but in our case the SMTP is a separate server , and to connect to it i need to define the ; server IP /Name , port number, username & password. but in SharePoint there is no option to define the port number , and the links you
provide are regarding configuring SMTP server, while we already have an SMTP server but i need to connect SP with it . can you advice please?

Can not start the mobile server

Hello,
I have the mobile server as an module of IAS on Linux, actually I am trying to start it but is the only component of IAS that I can not start

Do you actually get that HTTP error when you try to start the mobile server. Or do you get that error when the setup executable is running ?
I feel you are mixing up things.
Tell us exactly what you tried, and the error that you got.

HT201210 Why my Iphone can NOT contact the apple server update for fixing software problem?

My iphone 2s is having software problem It can not contact Apple Server for fixing problem

Download firmware from here
iPhone1,1_3.1.3_7E18_Restore.ipsw
save on your computer. Connect iPhone in iTunes. Option+Restore (Mac) or Shift+Restore pointing to the downloaded IPSW.

Can not connect the Cirrus Server, help me.

I am managing some On-line programs that use the Cirrus server.
They worked fine until yesterday, but today is not.
Please tell me what happen on the server.
I need help of Adobe so mush.

i'm not having any trouble connecting to Cirrus right now from my house.
our hosting provider, where the Cirrus servers are located, caused a connectivity problem for one of the many servers in our cluster from about 07:00 UTC monday til about 19:00 UTC monday. however, during that time, our plenty-of-redundancy kept the cluster operating normally. my utilization graphs show completely normal usage patterns during that time and up through now. i rebooted the affected server at about 19:00 UTC, which cleared its problem and returned it to normal rotation in the cluster.
other than the reboot to clear the issue on that one server, there have been no changes to the cluster in quite some time. please try the Cirrus sample application:
http://labs.adobe.com/technologies/cirrus/samples/
if that works for you but your application does not work, then most likely you have made a change to your application or your networking environment, since no real change has been made to Cirrus.

My windows user can not access the lion server.

All Mac user is ok.but all of windows user link fail.

I have been on the phone with Apple, done all of the trouble shooting they have recomended. When I attempt to connect it to the internet I get a message reading "your apple tv is connected to your wi-fi but cannot connect to the internet. I have plugged the modem right into the apple tv and it still won't work. This is the second device I've used. (apple gave me a new one after the first didn't work). I just thought there might be someone out there who had the same issue and knows how to resolve it.

Can not use the VC server

Hi,
I have installed the Visual Composer.But when I launch the Visual
Composer,the IE show: This product requires MSXML Parser v4.0 .I have
install the MSXML Parser v4.0,why ?
The MSXML Parser version is v4.0 sp1.

Hello,
I have the same problem.
Did you find a sollution?!!

Best Practice Analyzer database mismatch error

Hi all,
I am getting the following critical error when I run the BPA on a couple of our BizTalk servers and wondered if anyone had seen the same?
"The version of BizTalk Server does not Match the Version of BizTalk Management Database Schemas"
I am using v1.2 of BPA aagainst a BizTalk 2010 install.
This has only surfaced since we upgraded from BizTalk 2009 R2 BUT not on all of our environments.
It does not seem to be causing any runtime issues however as all applications seem to be running fine!!
Looking at the BizTalkDBVersion tables in SQL everything looks the same on servers which present this error and those that do not i.e. There is an entry for version 3.9.469.0 ... which matches the BizTalk Server version reported in the registry
at "\HKLM\Software\Microsoft\BizTalk Server\3.0\Product Version\"
The only thing I can see is that as this was an upgrade there is also an entry in the
BizTalkDBVersion tables for the 2009R2 version (3.8.368.0), so maybe the BPA is selecting this value and comparing against the regisrty version?]
However, this doesn't explain why I see this issue on 2 upgraded servers but not the 3rd?
Any ideas?
Regards,
Dave

Hi Dave,
There is no version as BizTalk 2009 R2. v3.8.368.0 refers to BizTalk 2009 (not R2).
The above error occurred because BizTalk Server Best Practices Analyzer has detected that the version of BizTalk Server does not match the version of the BizTalk Database Schemas. This can happen if the BizTalk database was deleted and then restored
with an incorrect database.
Check the version of SQL Server upgraded against the version of BizTalk server.
Reference BPA Help file:
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

SQL server Best Practice Analyzer output in .CSV

Hi Team, I ran SQL server Best practice analyzer on our SQL 2008 R2 server. I was trying to export scan result in .csv format but it is only giving me option to save it in .xml format. I have been looking for ways to export output in such a way
that it can be readable and I can send it to our clients but no luck.
How can I export SQL BPA output in .csv or any other user friendly format?
Thanks in Advance.

Hi MSRS27,
You can run Best Practices Analyzer (BPA) scans either from Server Manager, by using the BPA GUI, or by using cmdlets in Windows PowerShell. We can view or save BPA results from Windows PowerShell session in different format.
If you want to export BPA results to a comma-separated values (CSV) text file, run the following cmdlet, where Path represents the path and text file name to which you want to save the CSV results.
CSV results can be imported into Microsoft® Excel, or other programs that display data in spreadsheets or grids.
Get-BPAResultModel ID| Export-CSVPath
For more information, see: Run Best Practices Analyzer Scans and Manage Scan Results
http://technet.microsoft.com/en-us/library/hh831400.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Could not start the portal server after installing Portal Source Code

Hi all, I try to install the portal source code and compile portal source code on the development computer. It does not work. I use Visual Studio 2002. Now I can not start the portal server. I got the error. I delete source code from webapp\portal folder. I still get the following error.
948 03-14 11:16:20 Error UI Infrastructure 3328 3340 com.plumtree.uiinfrastructure.activityspace.Interpreter.HandleRequest() Unable to load request data._System.NullReferenceException_ at com.plumtree.uiinfrastructure.application.RequestData.LoadQSSettings() at com.plumtree.uiinfrastructure.activityspace.Interpreter.HandleRequest(IXPRequest request, IXPResponse response, ISessionManager session, IApplication application)949 03-14 11:16:20 Error UI Infrastructure 3328 3340 com.plumtree.uiinfrastructure.activityspace.Interpreter.HandleError() Server error._System.NullReferenceException_ at com.plumtree.uiinfrastructure.application.RequestData.LoadQSSettings() at com.plumtree.uiinfrastructure.activityspace.Interpreter.HandleRequest(IXPRequest request, IXPResponse response, ISessionManager session, IApplication application)950 03-14 11:16:20 Info UI Infrastructure 3328 3340 com.plumtree.uiinfrastructure.activityspace.Interpreter.DisplayServerErrorPage() Server error, redirecting to error page.951 03-14 11:16:20 Error UI Infrastructure 3328 3340 com.plumtree.uiinfrastructure.activityspace.Interpreter.HandleError() Error displaying error page._com.plumtree.openfoundation.util.XPException_ at System.Environment.GetStackTrace(Exception e) at System.Environment.GetStackTrace(Exception e) at System.Environment.get_StackTrace() at com.plumtree.openfoundation.util.XPException..ctor(String message) at com.plumtree.portaluiinfrastructure.login.PTPersonalSettingsHelper.GetPersonalSettingValue(String sSettingName, ISessionManager sessionManager, IApplication application, IPTSession ptSession) at com.plumtree.portaluiinfrastructure.login.PTPersonalSettingsHelper.GetPersonalSettingValue(String sSettingName, AActivitySpace asSpace) at com.plumtree.portalpages.common.uiparts.NavigationModel.Init(AActivitySpace parent) at com.plumtree.uiinfrastructure.activityspace.AActivitySpace.RegisterModel(String modelName, String storageName) at com.plumtree.uiinfrastructure.activityspace.AActivitySpace.RegisterModel(String modelName) at com.plumtree.portalpages.common.uiparts.PlumtreeAS.Init() at com.plumtree.portalpages.common.error.ErrorAS.Init() at com.plumtree.uiinfrastructure.activityspace.Interpreter.CreateSpace(RequestData tempData) at com.plumtree.uiinfrastructure.activityspace.Interpreter.DisplayServerErrorPage(RequestData tempData) at com.plumtree.uiinfrastructure.activityspace.Interpreter.HandleError(Exception e, Boolean bDisplayErrorInComments, RequestData tempData) at com.plumtree.uiinfrastructure.activityspace.Interpreter.HandleRequest(IXPRequest request, IXPResponse response, ISessionManager session, IApplication application) at com.plumtree.uiinfrastructure.activityspace.Interpreter.DoService(IXPRequest request, IXPResponse response, ISessionManager session, IApplication application) at com.plumtree.uiinfrastructure.web.XPPage.Service(HttpRequest httpRequest, HttpResponse httpResponse, HttpSessionState httpSession, HttpApplicationState httpApplication) at com.plumtree.portaluiinfrastructure.activityspace.PlumHandler.ProcessRequest(HttpContext context) at System.Web.CallHandlerExecutionStep.System.Web.HttpApplication+IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) at System.Web.HttpApplication.ResumeSteps(Exception error) at System.Web.HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData) at System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) at System.Web.HttpRuntime.ProcessRequest(HttpWorkerRequest wr) at System.Web.Hosting.ISAPIRuntime.ProcessRequest(IntPtr ecb, Int32 iWRType)
I don't know how to fix this problem. Should I reinstall portal server? Thank you for your help! Jan

Hi all, I try to install the portal source code and compile portal source code on the development computer. It does not work. I use Visual Studio 2002. Now I can not start the portal server. I got the error. I delete source code from webapp\portal folder. I still get the following error.
948 03-14 11:16:20 Error UI Infrastructure 3328 3340 com.plumtree.uiinfrastructure.activityspace.Interpreter.HandleRequest() Unable to load request data._System.NullReferenceException_ at com.plumtree.uiinfrastructure.application.RequestData.LoadQSSettings() at com.plumtree.uiinfrastructure.activityspace.Interpreter.HandleRequest(IXPRequest request, IXPResponse response, ISessionManager session, IApplication application)949 03-14 11:16:20 Error UI Infrastructure 3328 3340 com.plumtree.uiinfrastructure.activityspace.Interpreter.HandleError() Server error._System.NullReferenceException_ at com.plumtree.uiinfrastructure.application.RequestData.LoadQSSettings() at com.plumtree.uiinfrastructure.activityspace.Interpreter.HandleRequest(IXPRequest request, IXPResponse response, ISessionManager session, IApplication application)950 03-14 11:16:20 Info UI Infrastructure 3328 3340 com.plumtree.uiinfrastructure.activityspace.Interpreter.DisplayServerErrorPage() Server error, redirecting to error page.951 03-14 11:16:20 Error UI Infrastructure 3328 3340 com.plumtree.uiinfrastructure.activityspace.Interpreter.HandleError() Error displaying error page._com.plumtree.openfoundation.util.XPException_ at System.Environment.GetStackTrace(Exception e) at System.Environment.GetStackTrace(Exception e) at System.Environment.get_StackTrace() at com.plumtree.openfoundation.util.XPException..ctor(String message) at com.plumtree.portaluiinfrastructure.login.PTPersonalSettingsHelper.GetPersonalSettingValue(String sSettingName, ISessionManager sessionManager, IApplication application, IPTSession ptSession) at com.plumtree.portaluiinfrastructure.login.PTPersonalSettingsHelper.GetPersonalSettingValue(String sSettingName, AActivitySpace asSpace) at com.plumtree.portalpages.common.uiparts.NavigationModel.Init(AActivitySpace parent) at com.plumtree.uiinfrastructure.activityspace.AActivitySpace.RegisterModel(String modelName, String storageName) at com.plumtree.uiinfrastructure.activityspace.AActivitySpace.RegisterModel(String modelName) at com.plumtree.portalpages.common.uiparts.PlumtreeAS.Init() at com.plumtree.portalpages.common.error.ErrorAS.Init() at com.plumtree.uiinfrastructure.activityspace.Interpreter.CreateSpace(RequestData tempData) at com.plumtree.uiinfrastructure.activityspace.Interpreter.DisplayServerErrorPage(RequestData tempData) at com.plumtree.uiinfrastructure.activityspace.Interpreter.HandleError(Exception e, Boolean bDisplayErrorInComments, RequestData tempData) at com.plumtree.uiinfrastructure.activityspace.Interpreter.HandleRequest(IXPRequest request, IXPResponse response, ISessionManager session, IApplication application) at com.plumtree.uiinfrastructure.activityspace.Interpreter.DoService(IXPRequest request, IXPResponse response, ISessionManager session, IApplication application) at com.plumtree.uiinfrastructure.web.XPPage.Service(HttpRequest httpRequest, HttpResponse httpResponse, HttpSessionState httpSession, HttpApplicationState httpApplication) at com.plumtree.portaluiinfrastructure.activityspace.PlumHandler.ProcessRequest(HttpContext context) at System.Web.CallHandlerExecutionStep.System.Web.HttpApplication+IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) at System.Web.HttpApplication.ResumeSteps(Exception error) at System.Web.HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData) at System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) at System.Web.HttpRuntime.ProcessRequest(HttpWorkerRequest wr) at System.Web.Hosting.ISAPIRuntime.ProcessRequest(IntPtr ecb, Int32 iWRType)
I don't know how to fix this problem. Should I reinstall portal server? Thank you for your help! Jan

Server Core 2008 R2 SP1 - AD DS Best Practice Analyzer Scans Don't Produce Any Output

Hi,
This is a re-post moving this discussion to the recommended forum "Server Core" from here:
http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/cc33d429-88e0-4450-a73c-361e395fd217.
I am having problems producing any output for any AD DS Best Practice Analyzer Scans on a Windows Server Core 2008 R2 SP1 Domain Controller.
I have imported the "ServerManager" and "BestPractices" PS modules on that Server by running the following commands:
Import-Module ServerManager
Import-Module BestPractices
I've then run
get-BPAModel, to find out what best practice scan models are availale, this returns the following output:
Id
LastScanTime
Microsoft/Windows/DirectoryServices     Never
Microsoft/Windows/DNSServer               Never
I then run all the BPA scans on that box:
Get-BPAModel | Invoke-BPAModel
This returns the following output:
ModelId
Success Detail
Microsoft/Windows/DirectoryServices True       (InvokeBpaModelOutputDetail)
Microsoft/Windows/DNSServer          True       (InvokeBpaModelOutputDetail)
Since the BPA invocation results weren’t displayed automatically, I entered the following command to see them:
Get-BPAModel | Get-BPAResult | Out-File "D:\Source\BPA.txt"
This command will create a text file with the scan results but I only see the results of the DNSServer scan, not the DirectoryServices scan.
I have also tried to view the results in a HTML format by running the following command but still only see the DNSServer scan results:
Get-BPAModel | Get-BPAResult | ConvertTo-Html | Set-Content d:\Source\BPA.htm
I have also tried exeucuting the scan ONLY for the "Microsoft/Windows/DirectoryServices" model but can't get any results to be returned. I have also connected using server manager from a Full install of Server 2008 R2 SP1 but that
doesn't seem to show any results under the "Best Practices Analyzer" section when the "Active Directory Domain Services" node is selected, all 4 tabs ("Noncompliant", "Excluded", "Compliant" and "All") show zero (0). However, the summary text above the
tabs does show when the last scan was performed. which seems to be correct.
Is there something special that needs to be done to produce the BPA results for the "Microsoft/Windows/DirectoryServices" BPA model on Server Core 2008 R2 SP1?
BTW: The Forest/Domain is W2K3R2 Native, this is the first W2K8R2 DC in the environment and I have installed .NET 4 framework (Server Core) to support Powershell 3, also installed.
Thanks, Paul.
belpad

Hi Diana,
OK, pretty sure I've now found the root cause of the issue I've described above.
I was also looking into Windows Update Agent issues for these W2K8R2 Server Core DC's, where no updates would be applied via WSUS (configured via GPO) and would fail with "FATAL: CBS called Error with 0x8000ffff windows update agent server
core".
Yesterday, I managed to get one of the W2K8R2 Server Core DC's (WSUS updates) working again by removing one of the .NET 4 Framework security updates (KB2600211) which was manually applied when the server was initially setup. .NET 4 (Server Core Edition
http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=22833) was installed as a pre-requisitie for Powershell 3. Once this update was removed, the affected server core DC was restarted and WSUS updates started to get applied.
So I followed the same procedure on the other server core DC but this did not resolve the WSUS issue this time.  Next, I did further investigation into the Windows Update Agent problem. This led me to the following article:
http://blogs.technet.com/b/brad_rutkowski/archive/2008/07/03/windows-update-fails-with-8000ffff-e-unexpected.aspx which described an issue with NTFS permissions being set incorrectly on C: drive, with the "BUILTIN\Users" group completely
missing on the C: drive.
I found the affected Server Core DC also had this issue and when the "BUILTIN\Users" was assigned permissions on the C: drive as described above, and the Windows Update Agent re-started, the Server Core DC started to install all required updates
configured via WSUS.
Next, I ran the Directory Service BPA, which now produces the desired output either locally or remotely via Server Manager.
Therefore, I can only assume that the Directory Service BPA also uses "Network Service" much like WUAUSERV (Windows Update Agent), which requires access to the C: drive via the "BUILTIN\Users" assignment.
So this has subsequently led me to check the C: drive (%systemdrive%) permissions across multiple W2K8R2 machines, all of which showed differing assigned permissions, as follows:
1. W2K8R2 Server Core DC - With Directory Services BPA and Windows Update Agent Not Working
C:\>icacls c:\
c:\ BUILTIN\Administrators:(OI)(CI)(F)
    CREATOR OWNER:(OI)(CI)(IO)(F)
    NT AUTHORITY\INTERACTIVE:(OI)(CI)(RX)
    NT AUTHORITY\SYSTEM:(OI)(CI)(F)
2. W2K8R2 Server Core DC - With Directory Services BPA and Windows Update Agent Working OK
C:\>icacls c:\
c:\ NT AUTHORITY\SYSTEM:(OI)(CI)(F)
    BUILTIN\Administrators:(OI)(CI)(F)
    BUILTIN\Users:(OI)(CI)(RX)
    BUILTIN\Users:(CI)(AD)
    BUILTIN\Users:(CI)(IO)(WD)
    CREATOR OWNER:(OI)(CI)(IO)(F)
3. W2K8R2 Full DC - With Directory Services BPA and Windows Update Agent Working OK
C:\>icacls c:
c: NT SERVICE\TrustedInstaller:(F)
   NT SERVICE\TrustedInstaller:(CI)(IO)(F)
   NT AUTHORITY\SYSTEM:(M)
   NT AUTHORITY\SYSTEM:(OI)(CI)(IO)(F)
   BUILTIN\Administrators:(M)
   BUILTIN\Administrators:(OI)(CI)(IO)(F)
   BUILTIN\Users:(RX)
   BUILTIN\Users:(OI)(CI)(IO)(GR,GE)
   CREATOR OWNER:(OI)(CI)(IO)(F)
4. W2K8R2 Server Core DHCP Server (Migrated from W2K3 with Server Migration Tools) - With DHCP BPA and Windows Update Agent Working OK
C:\>icacls c:
c: NT AUTHORITY\SYSTEM:(OI)(CI)(F)
   BUILTIN\Administrators:(OI)(CI)(F)
5. W2K8R2 Server Core DHCP Server (Migrated from W2K3 with netsh) - With DHCP BPA and Windows Update Agent Working OK
C:\>icacls c:
c: NT AUTHORITY\SYSTEM:(OI)(CI)(F)
   BUILTIN\Administrators:(OI)(CI)(F)
   BUILTIN\Users:(OI)(CI)(RX)
   BUILTIN\Users:(CI)(AD)
   BUILTIN\Users:(CI)(IO)(WD)
   CREATOR OWNER:(OI)(CI)(IO)(F)
None of the above servers have a Group Policy or any in-house scripts defined that configure C: drive permissions. It seems odd that there should be such a variance in the C: (%systemdrive%) drive permissions across the above servers, with only
scenarios 2 and 5 above have matching permissions. I can only imagine that maybe some software or software update might be causing this.
By reviewing the above output, it seems there is also a difference between the C: drive permissions of W2K8R2 Server Core and W2K8R2 Full. Not sure if this is by design?
Is there any Microsoft Documentation describing what the default %systemdrive% NTFS permissions should be for W2K8R2 Server Core and Full. Furthermore, do these permissions change when the various infrastructure roles are installed and enabled i.e.
Domain Controller, DHCP etc. I ask, since I would like to use the correct set of permissions for %systemroot% in each scenario. Please advise if I should be asking this question in a different forum?
belpad

After the new 10.9.2 Maverick upgrade, my Photosmart C4480 3 in 1 printer can not scan and save the file to desktop or documents. You can only see the image in the print preview area. Does anyone know how to fix this or when a fix will be out?

After Aple support downloaded the new 10.9.2 Maverick upgrade on my MacBook Air, my Photosmart C4480 3 in 1 printer can not scan a document and load the file on to my desktop or document file. (You can see the doc image in the preview but it doesn't save it.) Does anyone know an Apple fix for this or when the fix will be out? After hours of trying reloading, and the usual fixes, etc. Apple told me to call HP, and HP told me they don't support Mac. It does not seem honorable of Apple to put out an upgrade and not tell people it will destroy their scanning ability, and that the only thing to do is to buy another printer/scanner.

Have you tried using Applications/Image Capture to scan.
Vuescan often works.
VueScan
VueScan FAQ

TS1398 my iphone 4s can not scan any wifi network, i tried everything but still can not scan any wifi connection even though our wifi is working properly in our mac book and ipad. What do i need to do if the problem is the hardware?pls help

my iphone 4s can not scan any wifi network, i tried everything but still can not scan any wifi connection even though our wifi is working properly in our mac book and ipad. What do i need to do if the problem is the hardware?pls help

When you say it "can not scan any wifi network" do you mean it is not detecting Wi-Fi networks?
Is Wi-Fi turned on in Settings > General > Wi-Fi?
Have you tried Settings > General > Reset > Reset Network Settings?
Is it just the home network that the device will not connect to? or any network?

Adobe Reader XI Pro does not recognize Samsung Multifunction Xpress M2875FD. I can not edit the PDF documents that I scan it. What do I do?

Adobe Reader XI Pro does not recognize Samsung Multifunction Xpress M2875FD. I can not edit the PDF documents that I scan it. What do I do?

We need to find out what you actually have here. There is no Adobe Reader Pro. There is Adobe Reader and Adobe Acrobat Pro.
With Acrobat Pro, you may be able to do some editing after running OCR. With Adobe Reader, you cannot edit.
Which one do you have?

Lync2013 Best Practices Analyzer can not scan the edge server details

Similar Messages

Maybe you are looking for