Lynksis E1000 wired connection to Xbox 360 (need help)
Here's my problem: I connect my ethernet cable from the router to my computer, and the connection works fine. (ethernet port 1 on router.) I connect it from the router to my Xbox 360, and it acts as if I haven't even connected the ethernet cable.
Could somebody please give me some guidance towards getting my Xbox to be able to run a wired connection from my router?
Hi Jake,
This might throw you off the internet for the meantime, but how about connecting the xbox to the Internet port on your router. Let's see if the LED will light up.
As you mentioned before, did you use the same cable to connect your xbox to your router as what you used when you tested your xbox with the modem? If not, have your tried using only one cable for this?
Also, do you have other gaming consoles we can use to test this issue?
Audere est facere
Similar Messages
-
Time Capsule + Wired Connection for Xbox 360 Problom
i just bought a eithernet wire for time capsule since my my wireless network aint working i got it to work for my ps3 no problom but appertly the 360 is doomed all the way around it ses thers a problom with my ip adress when it seems fine im verry comfused at this matter is ther a way to fix this problom or even get the wireless way back aswell much aprecited
XBox360 could connect to an Express which is wirelessly or ethernet to the TC. You should be able to connect wireless to TC anyway w/o the Express. When testing that xbox360 go to "other." Change security password to WEP from WPA2 if you have to...
-
How do I connect my Xbox 360 to my iMac
I want to use my imac as a TV so i want to know how to connect the xbox 360 to my imac.
Thank you for your supportWhat iMac model do you have ?
The 2011 ThunderBolt iMacs only work with other ThunderBolt Macs Thunderbolt 10.6 Help: Using another Mac as an external display
For the 2009 and 2010 27" iMacs with Mini DisplayPort you would need something like the Kanex XD http://www.kanexlive.com/xd
The Kanex XD is not compatible with ThunderBolt iMacs.
Stefan -
Hi been trying to connect my xbox 360 online and i am h...
Hi been trying to connect my xbox 360 online and i am having major problems my router is a WRT54GS v.6 i have the newest firmware also i also use a linksys wireless adapter for my pc i am connecting my 360 to my pc and doing internet connection sharing i can get a ip address this way but not a dns if i have ics off i do not get a ip address i have tried everything opening ports on my router for the 360 and still nothen i am about to break my router and get a differnt one. me need helps.
Yes, you have the ports connected backwards.
The WAN port is labelled with the "circle of dots" icon, and must be connected to your DSL modem.
The LAN port is labelled with the "double-headed arrow" icon, and that is where you connect ethernet cabled devices on your LAN.
See Apple's article AirPort Base Station: About the WAN and LAN Ports
What is surprising is that you haven't previously run into all sorts of problems with your existing setup. Once you cable things properly, you will likely have to power down your DSL modem and Base Station for a while (sometimes just an instant, sometimes overnight). After waiting, plug the modem into power and wait a minute. Then plug the base station into power and wait for it to restart. -
I'm trying to find a way to connect my xbox 360 to my mackbook pro. I've searched the internet and found that I can use a eagle eye device but, its to expensive. So after looking at the xbox website, I found a vga adaptor for my xbox and an vga to mini displayport and I was wondering if this would work.
The minidisplay port is output only. It's not going to show anything from your xbox.
-
I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. has anyone used this devive (AV360) on there own 27" thunderbolt display (not the imac) and gotten it to work? If so I'd appreciate the help.
There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
-
Connecting my xbox 360 (elite) to my macbook pro?
I recently got a Macbook pro for christmas, and was wondering if there was anyway that I could connect my xbox 360 elite to it. I want to use the my macbook screen as a screen for my 360, at least until I can afford a new TV (roommate knocked my 32" samsung off its stand and broke it christmas day...).
I heard there is a VGA coord from microsoft that connects from a vga port to the back of the xbox, and i have the DVI to VGA adapter for the mac already. Was just making sure this works before I spend the $50.
Thanks!Broschati,
No, this won't work. The DVI port on your Macbook Pro is for video out. The Macbook Pro's display is connected directly to the GPU, and there is no way to input video to it.
Scott -
Is there a way to connect an Xbox 360 to an HP TouchSmart 520-1030?
I have had this HP TouchSmart for well over a 2 years. This one question came to mind. Can you hook an Xbox 360 to an HP TouchSmart 520-1030? I have looked and Looked and found nothing helpful on the web.
Specs are: HP TouchSmart 520-1030
Intel Core i3-2120
4 GB's Of ram
No HDMI
This question was solved.
View Solution.Hello ScreenNameHere,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are looking to connect your Xbox 360 to your computer. First if you do not mind what is it that you are trying to do? Are you trying to use the TouchSmart as a monitor to play on or are you trying to use the internet access on the computer? As well, I would encourage you to post which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this we can provide you with accurate information.
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
Qosmio G20 VGA in for connecting to XBox 360
How can i connect a Xbox 360 to the qosmio using a VGA HD cable like this?
http://www.xbox.com/en-US/hardware/x/xbox360vgahdcable/
Is it possible to use the fantastic monitor of the Qosmio to play?
Any help apreciatedMores is right, there is no VGA input on the Qosmio G20 (I wish there was though), you have to use an S-Video connection from your Xbox. Using the Qosmio player works perfectly well, there's no delay at all, the only problem I had was the video quality was utterly terrible. S-Video out from my 360 to a TV was fine, but input into the laptop looked awful, oh well!
Cheers,
Steve -
Unsure about connecting my Xbox 360 to soundcard
I have searched this forum and looked at the stickies to determine if this is possible before posting but am a little confused so I decided to ask for clarification...
I have a Sound Blaster X-Fi XtremeGamer Fatalty Professional Series installed in my PC
I am considering purchasing the Sound Blaster Digital I/O module
Is it possible to get 5. surround from my PC speakers if I connect my Xbox 360 to this setup using the Xbox 360 VGA HD AV Cable?
Are there any downsides to doing so? Sound lag, skips, etc?I don't really know.. I got a Auzentech Prelude with SPDIF (supporting optical) input and output and even after Dolby Li've or DTS is activated on my system I get no sound whatsoever if I activate Dolby Digital on my Xbox360?
Is it supposed to be like that? No sound when running Dolby Digital through a optical cable to my Auzentech Prelude?
Dolby Stereo works, but then again I guess it wont really utilize my 7. speaker setup at all?
Or does the sound card upmix to 7. or something, even when running Dolby Stereo on the Xbox360?
No sound at all if I select Dolby Digital or that Dolby Digital WMA thing.. I thought Auzentech Prelude supported both Dolby Digital and that WMA thing?
At least the SPDIF / Optical output does? -
Trying to connect an XBOX 360 to my airport base station via ethernet cabl
Hello,
I have the older snow airport base station and was trying to connect my xbox 360 to it via an ethernet port. There are only 2 ethernet ports on the snow base station. one is being used by the cable coming from my dsl modem. the other free port i tried plugging into my xbox 360 to no avail. the xbox cant get an ip address. the open ethernet port on the base station is labeled with the circle logo. the one being used by my dsl modem has the two outer pointing arrows. I turned off the airport to my macbook and tried to connect my macbook to that port my xbox was in and it would not connect to the net either. Is it possible, i have the ports backwards. my wireless internet for all 3 mac computers works fine. Any help would be greatly appreciated!!!!
Thanks!!!
VinnyYes, you have the ports connected backwards.
The WAN port is labelled with the "circle of dots" icon, and must be connected to your DSL modem.
The LAN port is labelled with the "double-headed arrow" icon, and that is where you connect ethernet cabled devices on your LAN.
See Apple's article AirPort Base Station: About the WAN and LAN Ports
What is surprising is that you haven't previously run into all sorts of problems with your existing setup. Once you cable things properly, you will likely have to power down your DSL modem and Base Station for a while (sometimes just an instant, sometimes overnight). After waiting, plug the modem into power and wait a minute. Then plug the base station into power and wait for it to restart. -
is there a reason iPhones won't connect with Xbox 360's like iPods did?
Because even though it plays mp3 and has ipod capabilites...it's a phone! Were you able to connect your previous cell phone to your Xbox?
Message was edited by: iphonechik -
My iphone 4 is not working and I cant reset it from the computer either because it wont connect to it I need help!!!
1. I tried connecting it to itunes for a system reset and it didnt work.
2. The phone wont even turn on!!!If the phone wont turn on it sounds like it needs to be charged. Plug it into a charger and wait about 15 minutes and try turning it on while still charging. Have you tried holding in your home button with the on/off button held in? Hold them both together until the apple logo comes up and then release them. The screen will blink off an on while it is resetting. I still think this is a battery issue. Good luck~
-
BEx Connection Failure...need help !!
This is the error message.
Error Group
RFC_ERROR_COMMUNICATION
Message
Connect to SAP gateway failed
Connect_PM GWHOST=192.168.7.190, GWSERV=sapgw01, ASHOST=192.168.7.190, SYSNR=01
LOCATION CPIC (TCP/IP) on local host
ERROR partner not reached (host 192.168.7.190, service 3301)
TIME Thu Aug 10 16:41:48 2006
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -10
MODULE nixxi_r.cpp
LINE 8593
DETAIL NiPConnect2
SYSTEM CALL SiPeekPendConn
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 4
Need help..asap!!
Thanks in advance.Hi Chintai,
we got a problum when we are trying to connect to Bex to BW server. we got the same problum which you got earlier.
we the the following error message
Error Group
RFC_ERROR_COMMUNICATION
Message
Connect to SAP gateway failed
Connect_PM GWHOST=10.235.245.95, GWSERV=sapgw00, ASHOST=10.235.245.95, SYSNR=00
LOCATION CPIC (TCP/IP) on local host
ERROR partner not reached (host 10.325.295.95, service 3300)
TIME Mon Oct 30 17:50:50 2006
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -10
MODULE nixxi_r.cpp
LINE 8593
DETAIL NiPConnect2
SYSTEM CALL SiPeekPendConn
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 2
Please let me know whou you have resolved the issue.
Please mail me your solution. Mailid: [email protected]
Thanks
Lakshmi -
I just bought an iPad2 and each time I click on the iTunes button it says "cannot connect to iTunes" I need help on this urgently
Try a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
Basic troubleshooting
From Here
http://www.apple.com/support/ipad/basics/
Maybe you are looking for
-
CASE not found while executing CASE statement on Submit Form
Hi to all APEX users and developers. I have several APEX applications and they are all working well, but recently I got one strange exception when I try to submit page: Session: Fetch session header information ...metadata, fetch page info ...Validat
-
How can i delete apps from the purchased list?
i have apps from like a while ago, and i deleted them, but with apples new "purchased" feature, you are able to see everything. How do i delete them???
-
IPhone 4 OS crashes Adobe Bridge's Photo Downloader and Nikon Transfer
Ever since I updated my old iPhone 3G to the new OS4, it crashed Adobe Bridge's Photo Downloader, and I don't like to use iPhoto, so I won't. I haven't for years. I just bought the iPhone 4 fully expecting that the non-Apple photo utilities would get
-
Program does not wait for user input
Hi everyone, i am working on a program and there are 2 problems that i can't figure out. Since they are 2 different topics, I will do 2 posts. Just to give you some background on the program, it is a program that reads 3 txt files into 4 different ar
-
Excuse me,i failed to install java plug-in in the platform of pentium 4
r there some compatiable problems between p4 n java plug-in? thx a lot~