Lynx k3011w tablet frozen after long sleep under win 8.1

Hi,
I have k3011w tablet updated to win 8.1. Latest drivers installed including intel driver from microsoft update. I found that after long time sleep, the table was frozen. Pressing window key does not wake up the tablet. Short pressing power key does nothing. I have to long press power button to restart the tablet.
Any one has same issue? How to resolve it.
Thanks.

This has also happens to me it is the only problem I have had thus far. I also have the latest drivers. I am hoping a fix will be released. So far, from my research, it appears that there isn't anything much to be done outside of waiting for a fix to be released.
I am unsure whether this fix would come from microsoft or Lenovo, or whether one will come at all.

Similar Messages

Wi Fi looses connection after long sleep and the performs poorly after reconnecting

I am having trouble with the Wi FI dropping after a long sleep. Then after getting back on line trouble with pages loading slowly. This just started when I switched to Road Runner Lightning using a Ubee DVW 3201B modem/router. My service provider is Brighthouse. They suggested that the MAC firewall is the problem. Do I need the firewall with asecure router/ any help appreciated.

I have the same issue and have to cycle the wireless modem on the laptop. Doesn't matter if I'm on a preferred netowrk or no, or if I stay on the same network or move. I come out of sleep, I have to cycle the modem.
It's not life threatening, or anything, but it's a hassle. I didn't have the issue with Snow Leopard.

MacBook Air not reconnecting to wireless after long sleep.

Hello,
First off, apologies if this has been addressed in a previous post; went through a few pages and saw nothing that helped.
I have been having problems with my i5 Thunderbolt 11" MacBook Air - running Lion 10.7.3 - reconnecting to my home network, which is listed as a Prefered Network, after being in sleep mode; especially after a long sleep, say overnight.
I know it's not my network because my 2.8 Core 2 Duo 15" MBP - running 10.6.8 - never has a problems reconnecting.
I see other posts refering to a WiFi Update for other machines, but not the Air. And this was purchased with Lion, so while a re-install might solve the issue - again something I saw suggested - I would rather avoid the hassle.
I've checked with the "Apple people" at Best Buy - the closest thing I have to an Apple Store here in South Texas - and they say the recent update should have fixed the problem.
Thanks in advance for any thoughts/suggestions/advice are greatly appreciated!
- Rob

There are no solutions because for many it is still an unresolved problem. It is not a problem for most. I for one have three Macs, a MacBook Pro, a MacBook Air, and a MacMini. Only one of the three, the MacBook Pro, has the problem.
Also see these, all on Lion: https://discussions.apple.com/thread/3704573?tstart=30
and: https://discussions.apple.com/thread/3190651?tstart=60
and: https://discussions.apple.com/thread/3192395?tstart=90
and: https://discussions.apple.com/thread/3191630?tstart=150

Late 2012 iMac loses resolution after long sleep

Hi guys, 1st time post that I hope someone can help me solve.
After I wake my 27" iMac after a long sleep the text is blurred and when I look at display resolutions I only have two options (1024x768 & 800x600).
A reboot does not always solve it, a NVRAM reset works sometimes and a Safe Boot always works. During NVRAM reset the 1st screen is the normal grey but after the second chime the screen can be snowy.
Currently I have computer sleeps set to never and with the display set to sleep after 20mins, and I have not had a problem yet.
I have reinstalled mavericks (not a clean install), removed memory, disconnected all usb devices and reset SMC but still have same problem.
Anybody got any ideas?
Dave

Welcome to Apple Support Communities ..
Text is blurred .. Safe Boot always works.
Might be a font causing this since Safe Mode disables all third party fonts.
Open FontBook in your Applications folder.
From the FontBook menu bar click File > Restore Standard Fonts
Restart your Mac to test.

Screen jitter after long sleep

Hi Folks -
I have macbook air (about 2 years old) running Mac OS X 10.8.3. Lately I'm veen noticing that the LCD screens jitters and jumps when awaking from a long sleep. If I sleep the computer again, and then wake it up immediately, the problem goes away.
Anybody seen anything like that?
Paul

Consider a possible third party software issue.
Consider a visit to the optometrist.

ARD 3.3 Will not Wake Machine After Long Sleep

We are using ARD 3.3 on our network. We have found that ARD will not wake machines after they have gone to sleep and stayed in that state overnight. If I manually wake the machine and put it to sleep, it works fine. If I wake the machine and put it to sleep for several hours, it still works fine. The problem is completely random and only seems to happen when the machines have been asleep overnight. There are three machines this occurs with, I will describe each one below. I have a sneaky suspicion that it is our Firewall appliance causing the problem, but would appreciate any other input...
Machine #1
Intel Imac 2.8Ghz core-duo
OS X 10.5.8
4GB 667mhz DDR2 SDRAM
Problem: Occurs 98% of the time and is very consistent on this machine
Machine #2
PPC G5 Imac 1.9Ghz
OS X 10.4.11
1.5GB SDRAM
Problem occurs about once a week to once every other week with this machine
Machine #3
Intel Imac 2Ghz Core Duo
Mac OS X 10.5.8
2GB 1067Mhz DDR3
Problem occurs once in a blue moon
I have tried the following troubleshooting steps with machine #1 because it seems to have the problem so much...
1. Tried another user account
2. Tried removing power management plist located in HD --> Library --> Preferences --> Systemconfig
3. Tried resetting the SMU
4. Tried to repair disk permissions
5. Ran FSCK -FY from single user mode
6. Ran AHT for 17 hours straight with no errors
7. Booted to clean install of OS on external FW drive with user ported to FW drive.
BTW: Our firewall appliance is an Snapgear SG560 with the latest firmware.
Thanks for any input much appreciated...

I cannot wake up any computers even if asleep for a few seconds. ARD 3.3 has broken a lot of features such as copying files by dragging from a remote connection to desktop and it no longer reports Current Status correctly.
AWFUL update. Apple please fix this or explain how to downgrade to 3.2
I can no longer use this in the school where I supervise 50 Macs.

Live Cam Voice requires restart after system sleep under Vista

I have attached my Live Cam Voice to my brandnew Vaio Notebook which runs Windows Vista Home Premium and installed the latest drivers from the Creative website. The cam works fine, until I put the laptop to sleep mode and waking it up again. After waking the PC up, the cam is not recognized anymore and I need to restart the computer.
Anybody experienced similar problems and (hopefully) has a solution? Thx.

Did you ever solve this problem? I have a similar problem on my desk top running Vista Home. I couldn't get the Vista driver (download from this wesite) to load so resorted to trying the XP dri've. This seemed to work until Vista put the machine into "Sleep" mode. After coming out of Sleep mode I eith have to restart the computer or disconnect and reconnect the webcam.

Help! 2010 imac 27" - Display doesn't work after long sleep

I just recently started having this problem. I've had this iMac since 2010 with zero issues, but it seems like ever since I downloaded Yosemite, the screen won't work after the computer has been sleeping for a while. I have to hold the power button and do a hard restart to get it to work again. If the computer has only been sleeping for a while, it wakes just fine. It's only after it's been sleeping all night and I go to use it agsin. I've checked power connections and all is good. Any ideas??

Hi Punisher8522,
Welcome to the Support Communities! The resource below offers some troubleshooting steps to try when your computer won't wake from sleep.
OS X: When your Mac doesn't sleep or wake - Apple Support
http://support.apple.com/en-us/TS5357
Your computer cannot wake from sleep
Make sure your computer isn't powered off by pressing the power key for one second.
If you're using an external display, make sure your display is not powered off or unplugged.
If you are using a Mac desktop:
Make sure the AC power cord is connected securely to the computer and outlet.
Make sure the AC power outlet it is connected to is working properly.
If your computer is plugged into a power strip, make sure the power strip is not turned off. Check to make sure other items connected to the power strip are receiving power.
Your computer is slow to wake from sleep
If you see a progress bar when you wake your computer from sleep, this is normal. The computer is waking from safe sleep.
OS X Recovery and sleep
The system software your computer uses when started from OS X Recovery allows display sleep. Your computer does not go to sleep on idle while started from Recovery unless you are using a Mac notebook that is not connected to AC power.
Additional troubleshooting
If the steps above do not resolve your sleep-related issue, try these additional recommendations.
Reset SMC
The System Management Controller (SMC) is involved in managing power on your computer. Reset the SMC on your Mac if you are having difficulty sleeping or waking your computer.
Reset NVRAM/PRAM
Nonvolatile RAM (NVRAM)/Parameter RAM (PRAM) stores some power-related settings.Try resetting NVRAM/PRAM if you are having difficulty sleeping or waking your computer.
Test with external devices disconnected
Some external devices can prevent your computer from sleeping. Try disconnecting items other than your Apple keyboard or mouse from the built-in USB, Thunderbolt and Firewire ports on your Mac. If this resolves the issue, try reconnecting your external devices one at a time until you find the device preventing sleep or wake. Check the documentation that came with the device, or contact the device manufacturer for more information.
Try Safe Mode
Check to see if the issue still occurs when the computer is started in Safe Mode. If this resolves the issue, it could be related to a third party software item such as:
a login item
a startup item
a third party kernel extension
Try another user account
Try creating another user account, or log in as guest. See if your computer sleeps and wakes properly from the additional user account. If it does, your issue may be related to one of the following:
a login item
an app open in the original user account
You can disable login items from the Accounts pane of System Preferences. Try opening only one app at a time in the original user account to determine which app is preventing sleep. If you isolate the issue to a particular app or login item, check its documentation, or contact the developer of that software for more information.
Last Modified: Sep 19, 2014
I hope this information helps ....
- Judy

IMac (Mid 2011) Does not wake up after long sleep

Hi People,
Having issues with my Mid2011 iMac (21,5", 2.7GHz). Just upgraded to 12GB RAM (2x2GB original + 2x4GB). System runs fine, no issues.
But when system goes to sleep for a longer period (a few hours) it will not wake up again. Neither by Keyboard/Mouse interaction (Bluetooth as well as USB) nor by pushing the powerbutton. I also performed the PRAM and SMC reset as described in the apple support resources.
Feeling a bit lost. Any Ideas?
Thanks in advance for any help!

Addition:
Performed a test of the RAM with memtest. No erros found. Also forget to mention that the Mac has also Software updates and firmware updates installed.

Black screen upon wakeup after longer sleep...

In the last 2 months or so, I have seen my MacMini 2011 OSX 10.7.3 crashing withing a minute of wakeup, after sleeps of more than 2-3 hours.
Sometimes the Black screen occurs almost immediately, sometimes it takes up to a minute after the desktop appears (after logging in).
This did not occur until I got 10.7.3 and only within the last 2 months.

Anyone?
I am up to 100 crashes upon wakeup now. Various versions of Lion 10.7.x. I have done clean installs as well.
Does anyone else get the black screen of death shortly after wakeup from sleep?
This never happened on 10.7.0, 10.7.1 or 10.7.2
Crashes happen in both 10.7.3 and now 10.7.4, and for sleeps as short as 90 minutes.

Screen won't wake up after long sleep. HP Envy All-in-one, no touch screen, windows 8

If asleep for a short time (+ or - 30 mins), it wakes up. For a longer time, the computer comes alive, but the screen stays dark blue. If I wait two minutes and then move the mouse or space bar, the screen comes up.
I worked through the on line help, changed several settings, but it did not help.

Hello Ken900,
Please take a look at this document, which provides troubleshooting steps that I hope, will help resolve your 'waking up/freezing' issue.
If I have been helpful or if you’d like to say thanks you can click the white star under my name to give me Kudos. I really appreciate it!
Please let me know if this helps resolve your issue.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Problems switching users and recovering from long sleep sessions

I upgraded my 2008 MacBook Pro to Mavericks and am now having issues with switching users and recovering from sleep. I can sometimes go to the login window but the system hangs when switching from one user to another. It often hangs after long sleep sessions.
Often I am finding that switching off and back on i sth easiest solution but I am getting a bit sick of it. Anyone have any suggestions?

funkyblue:
I usually leave my Pismo on and allow it to sleep. I find that waking from sleep and general functioning of the computer works a lot better if from time to time (I do it at least weekly) I shut down the computer, start up in Safe Mode, log in, empty Trash and reboot normally. The emptying Trash part clears the font caches.
You should consider doing other maintenance procedures, if you don't already. Gulliver's Mac OS X System Maintenance has good ideas with linked resources.
Please do not hesitate to post back with further questions or comments.
Good luck.
cornelius

No sound on Audigy 2 ZS under Win XP, under Linux

Hi,
I have an Audigy 2 ZS installed on my AMD 64 3500+, Board Asus A8N-SLI Deluxe (BIOS 0). I first installed Win XP, Sound drivers and everything worked fine, then installed SUSE Linux 9.3 (x64-Version), and everything was fine too. After a while, under Win XP the sound card stopped working. I don't remember what I changed in my config, but I couldn't get it working again under XP. Under Linux everything is still ok.
I even reinstalled XP, and still there's no sound. Strange thing is, that the drivers install perfectly and everything on the system seems to be ok, but there's no sound neither on digital-out nor analog.
Any ideas would be greatly appreciated.

I tried both, disabling, enabling.
Currently there's a digital sound system with external decoder connected to it (Creative Soundworks DTT3500 Digital), as well a 5. analog Headphone, so all jacks execept line in are connected. Headphones and sound system is ok, I tested that on other PCs.

Please could you advise? ... After installing Itunes 11.3.1.2 on my Laptop and when reconnecting my iPad2 via USB, it is no longer visible under 'My Computer'. Any advice on resolving this issue would be most welcome. Thanks

Please could you advise? ... After installing Itunes 11.3.1.2 on my Laptop and when reconnecting my iPad2 via USB, it is no longer visible under 'My Computer'. Any advice on resolving this issue would be most welcome. Thanks

Any one or a combo may help
Give your iPad a reset. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and try again.
Try a different USB cord
Try a different USB port
Try rebooting your computer
Try closing/opening iTunes.
If you go through that and it doesn't work, try going into the control panel, add/remove programs. Uninstall iTunes, Apple Mobile Device Service, Apple Application Support. Then redownload and reinstall iTunes and try again

My wireless mouse disconnects after a long sleep, and only rebooting machine makes it come back.

My wireless mouse disconnects after a long sleep time, always overnight, and pushing buttons, replacing batteries, etc. doesn't wake it up again. I have to reboot the machine, sometimes losing data, in order to make it work again. I am kinda new to mac, so hopefully I am just missing something easy.

Maybe something here will help:
https://discussions.apple.com/message/15090955#15090955
Regards,
Captfred

Lynx k3011w tablet frozen after long sleep under win 8.1

Similar Messages

Maybe you are looking for