M.2 connector in Portg Z30-A?

So, I have ordered myself a Z30-A-189.
In this review of its big brother Z30-A-12U they show a picture of the exposed motherboard:
http://www.notebookcheck.net/Review-Toshiba-Portege-Z30-A-12U-Notebook.108290.0.html
Am I crazy, or do I spot a M.2 connector beneath the WiFi card?
To me it looks like an "M key" connector with 4x PCIe 3.0 lanes, or am I wrong?
I really hope that I'm not crazy. At some point when NAND Flash finally gets retired and we start to see some propper fast and small SSDs, having a 32Gb/s SSD connector seems like a godsend!

Just for reference that is indeed a M.2 connector, it's also only for SINGLE sided 2242 boards (i.e. no SSD's fit, but the 3G/4G WWAN module fits because it's single sided).
The other M.2 connector is a B type for double sided 2230 boards (i.e. the intel wireless nic).
At the moment I don't know if SATA and/or PCI-E is wired, USB is wired because the WWAN modules uses the USB pins. Also I don't know if even if SATA and/or PCI-E is wired the bios/efi room has support for any modules other than the WWAN module.
On the positive side I think there is space enough for using an M.2 extension cable with a full 2280 board attached (albeit secured either with glue or insulating tape). In case it's only useful if the socket is SATA and/or PCI-E wired and the BIOS/EFI supports it.

Similar Messages

Portg Z30-A-182 - Recovery Media Creator Error

Hi,
I have a brand new Portg Z30-A-182, have installed my office and virusscan and now want to create a set of Recovery DVD's using Recovery Media Creator.
I use a Samsun external DVD-writer and DVD+RW disc's.
I keep getting the error 0E01BA-49-00000000 when the software wants to start writing to the DVD.
I searched the internet and this seems an error which occurs frequently and does not get solved using other type of discs.
How do I solve this error ?
I saw that I can BUY a set of recovery discs with Toshiba online, but that can not be the purpose with a brand new pc ???

Can you plese test functionality when you try to create recovery USB stick?
I have machine without ODD too and I have created recovery USB. It is for me more komfortable than using DVDs.
By the way: in the past i have created recovery DVDs using DVD-R medias only.
Check also this thread.

Portg Z30-B-117 noisy fan

Hi,
I have a problem with my new notebook Portg Z30-B-117,
It has realy noisy fan, I was forced to use baterry saving mode, without that I can not work on this machine.
The fan speed is absurdly designed.
It has much more speed even when it does not heat up.
Please make a new bios with clever fan speed, then it will be the best notebook on the market!
Thanks in advance.

Hi, I bought Portg Z30-B-119 a few days ago and I agree this would*be the best laptop/ultrabook on the market, if not for two annoying problems that can easily be fixed by Toshiba.
1/
The fan indeed turns on and off very often, and really unnecessarily. It is not related to running any highly demanding process. It is enough to watch a video clip on youtube for 2 minutes and the fan turns on for few seconds, and then switches off because the laptop cools down enough. Then after another minute the temperature rises again so the fan is on again, and so on, back and fourth. This is quite annoying. This happens also when you just read something, just less often. And I know why this happens. Here is the explanation.
This is simply because of a very bad choice of Toshiba.* I used a tool that monitors the temperature of the cpu core (under Linux) and I saw that the fan is turned on already at 49 degrees Celsius (the core temperature, not the laptop case! The laptop is really cool outside when the cpu has 49 degrees inside!)*
How stupid is that! This laptop has i5-5200U installed so the maximum cpu core temperature is 100 degrees, so why not turning it on at 65 or 70?* On my Dell laptop, the fan is switched on at 65 degrees even though it is a lot less noisy than on Toshiba.
I use "balanced" mode for cooling, so the fan is less noisy than in "high performance" mode but it is still much more audible than on my Dell laptop.
The "power saving" mode is useless, because when the laptop reaches 48 deg the cpu frequency goes down to 400 MHz permanently (yes, because it will never cool off without the fan) and the laptop is useless at 400 MHz.
2/
The battery charging. The battery lifetime will be very bad on Tosbiba Z30. This is because the laptop charges the battery every time you plug in the power supply even if you used your laptop on battery for two minutes and it still shows 100%. Moreover this cannot be switch it off. I measured it simply by monitoring the current when switching the power cord with the laptop switched off so this is a fact not just a hypothesis.
On my old Dell laptop, the battery will never start charging until it goes below 90%. On my friend's Lenovo there is even an option in the Bios so he can decide to charge the battery only when it is below 70%.
It is a well-known fact, that the battery life is much shorter if you keep charging it when it is nearly full.
On my Dell laptop, I can even disable charging the battery completely using Fn+F2. So I can decide myself when to switch in on.
I do not expect Toshiba to have such a sophisticated tool, but at least they could disable charging the battery until it is discharged for example 80%.
Both problems can be easily fixed. The question is, do they care about their customers enough to do it? And how do you request such feature? Do the read the forum?

Portg Z30-A-108 - Num lock does not work on external keyboard

Hi,
We have a Portg Z30-A-108. We use it with external wireless keyboard and mouse. On the external keyboard is used, the num pad does not work (as if the "num lock" was off). I tried using the function key FN+F11 on the laptop but without any succes.
Does somebody had the same problem or any idea to solve it ?
Thanks.
Nicolas

>On the external keyboard is used, the num pad does not work (as if the "num lock" was off)
You are talking about the external keyboard.
But from my knowledge the internal Portg Z30-A-108 keyboard does not contain the num pad. Possibly this is the reason why the Num Lock is turned off.
By the way: the NumLock can be enabled in the system registry.
Open Windows registry editor using the command regedit.
In the registry, go to the folders.
HKEY_CURRENT_USER\ Control Panel\ Keyboard\
Within the keyboard folder, you should find a string value named "InitialKeyboardIndicators" with a value of 0, 1, or 2.
Here the value meaning:
0 = Num Lock is turned OFF after the logon.
1 = Disable Num Lock.
2 = Numlock is turned ON after the logon.

Wifi problems Portge Z30

Hi everyone,
I have a Toshiba Portege Z30 from 1 year ago, and almost since the beggining I've had some issues with the wifi. It works fine, and suddenly it stops working. The icon shows no change, but surfing internet and downloads become really slooooow. I just turn off the wifi and turn on again, and it works fine till next time it happens. It happens just sometimes...
Does anyone have a similar problem with his Toshiba?

Hi
Does it happen using battery power or did you notice this WiFi issue using the notebook connected to mains power.
From my point of few the WiFi performance could be affected by some power saving settings which you could set in Microsoft Advanced power settings.
You should check this choose the power plan you are currently using and go to Advanced settings. Here you should check the available WiFi options and should set for both modes (batter / mains power) performance.
Feedback would be appreciated.

Portg Z30-A-1E1 - External monitor blacks out randomly

Very annoying problem - every now and then the monitor blacks out for 2 seconds and comes back.
Monitor is powered all the time.
HDMI cable changed twice and does not solve the problem.
Seems like a change of resolution or a reset - can the problem be in the graphic card? Otherwise maybe the HDMI port itself detecting strange stuff?
Please help I'm getting crazy as I work 90% of the time on external monitor.
Thanks
MAx

Originally Posted by ammtosh
I would try the French service, Toshiba is an international company. If you have a problem with your Italian car in France you go to the French workshop...
Yes maybe you are right. Still, annoying not being a fluent French speaker to have to deal with them.... and with 90% possibility that they'll say "if you bought in Italy you should talk to them". I'll try.
PS: another ridiculous thing: you buy a product that has a problem, and you need to pay to call the support service? Really not acceptable....
The dark side is strong.... actually, I start wondering which is the real dark side. Theory of relativity!

Fingerprint Utility on Portege Z30-A-12Q is not working

Hello,
I need help regarding this issue :
I performed a fresh windows 8.1 install, the same version as before, but this time i chose UEFI over BIOS. When i used BIOS the fingerprint sensor was working fine, but now it says "Failed to connect to the sensor".
I am using Toshiba Portege Z30-A-12Q i5-4200 256 GB SSD, or the PT243E model. I searched the forums and i found a issue similar with another Toshiba R product which was resolved by adding a firewall exception.
I added fingerprint utility in firewall exception, even disabled firewall all the way, but still the same problem. Also in device manager i have under Biometric devices Validity Sensors (WBF) (PID=0010).
I also checked in BIOS to see if it it enabled and it is.
The only thing i changed in BIOS are Secureboot (made it on) and chose CSM (for UEFI), but i think these settings have no relevance to the problem since they are used for booting.
I tried uninstalling and reinstalling the driver 3 times.
Please help me with this problem.
Thank you very much,
Andrei Chitescu

This is very interesting : what do you mean by "Installed the chipset driver two times" ?
I have exactly the same problem with a Portg R30A-19Q.
Changed over from Win 7 to Win 8.1 (one of the worst decisions in my life ! What a disappointment !
Productivity down by a factor 3 or 4 ! But this is another subject !).
Tried to reinstall the fingerprint recognition, which did not accept my fingerprints (because "already used on another account").
Called French technical support, who recommended uninstalling the fingerprint recognition software, which would erase my previous Win 7 fingerprints, left over in the BIOS.
Then after reinstalling the software, it did not work any better.
Called again technical support, who gave me a "confidential" link to a fingerprint clean up software, that would remove the fingerprints left over in the BIOS.
This did not work either, because the installation could not find ATWBFClient.dll.
Called again technical support, and was told that there was no other solution than reinstalling Win7, then erasing my fingerprints under Win 7, then reinstalling Win 8.1, and recreating new fingerprints ! What a nightmare !
If anything can be done Under Win 8.1, I shall try ten times !
Thanks !

Portg: Watching DVD's on my TV

My new Portg has a built-in DVD player--so excited!!!! Can I watch the DVD on my TV? If so, what kind of cable connections would I need?

As far as I know every newer Toshiba notebook has a TV-Out built-in. But be carefull there are two different standards S-Video and RCA connector. You can differ them, S-Video looks like an PS2 port and have 6 connectors, the RCA connector is yellow and have one connector. You have to consider which standard is in your Portege and which one is supported by your TV.
CYA BOB77

How can I connect my Early 2011" Macbook Pro 13" inch, with a generic Mini Display Port to HDMI connector, to a LG 32LD340 LCD TV, using Mountain Lion 10.8.2?

I have an Early 2011" macbook pro 13 inch (core i5 2.3ghz 4gb ram 320hdd) with Mountain Lion 10.8.2, and I want to connect it via Mini DP to HDMI connector, and a HDMI cable to a LCD TV LG 32LD340. When I had Lion OS, I had no problems at all.

If you have an external drive equal to or larger than your internal HD, clone your internal to it with either Carbon Copy Cloner or Super Duper. Test the clone to make sure it's bootable. Then upgrade either one. Try it out first.

Unable to load database connector - using JRC w/report connecting to Oracle

A simple Java program was created to test a Crystal Report using JRC. The Java program is a thick-client Swing desktop application (modified from an example of crxi_r2_migrating_rdc_to_jrc.pdf). The program failed to execute the report with the following error:
Unable to load database connector u2018com.crystaldecisions.reports.queryengine.driverImpl.DriverLoader'
It might be something simple to correct the problem, but I am not able to find related answers in the documentation and from the forum.
CR version is XI R2. The Java program was compiled and run using jdk1.4.2_13. Oracle is 10.2.
Do I have to use JDBC? or the CR Oracle driver will do? What needs to be setup? If I use JDBC, what do I need to setup (I tried to following the links in the forums or other documentation, but most of the links to http://support.businessobjects.com/.... are broken - i.e. re-route to the SAP support page but not directly linked to the articles)
When the report JRCTestReport.rpt was saved with the option "Save Data With Report", it works fine. So the problem is only with Oracle database driver, the other jars are fine.
In the report JRCTestReport.rpt the database properties are:
       DatabaseDLL             crdb_oralce.dll
       Password
       Server                        myTestDB
       Trusted_Connection    False
       User ID                      MyUser
The crdb_oracle.dll is located at:
C:\Program Files\Business Objects\Common\3.5\bin
Files are stored in the following tree structure:
<Testing Folder>
     JRCTest.java
     JRCTest.class
     WEB-INF
               lib
                    All required JRC jars and CRConfig.xml
     Reports
               JRCTestReport.rpt
Java source code JRCTest.java
import java.awt.*;
import javax.swing.*;
import java.io.*;
import com.crystaldecisions.ReportViewer.*;
// Use this for talking to JRC in-process
import com.crystaldecisions.reports.sdk.*;
import com.crystaldecisions.sdk.occa.report.reportsource.*;
public class JRCTest
     private static void createAndShowGUI()
          try
               //Make sure we have nice window decorations.
               JFrame.setDefaultLookAndFeelDecorated(false);
               //Create and set up the window.
               JFrame frame = new JFrame("JRCTest");
               frame.setTitle("JRCTest");
               frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
               ReportViewerBean viewer = new ReportViewerBean();
                                  System.out.println("ReportViewerBean.init");
               viewer.init(new String[0], null, null, null);
                                  System.out.println("new ReportClientDocument");
               ReportClientDocument rpt = new ReportClientDocument();
                                  try
                                          System.out.println("Openning Report...");
                                          rpt.open("JRCTestReport.rpt", 0);
                                  catch (Exception ex)
                                          System.out.println("Failed to open report");
                                          System.out.println(ex.toString());
                                          return;
                                  try
                                          System.out.println("logon...");
                                          rpt.getDatabaseController().logon("myUser", "myPass");
                                  catch (Exception ex)
                                          System.out.println("Failed to logon");
                                          System.out.println(ex.toString());
                                          return;
                                  System.out.println("ReportClientDocument.getReportSource");
               IReportSource rptSource = rpt.getReportSource();
               viewer.setReportSource(rptSource);
                                                System.out.println("viewer.setReportSource");
               frame.getContentPane().add
                    (viewer, BorderLayout.CENTER);
               frame.setSize(700, 500);
               frame.setVisible(true);
               viewer.start();
          catch (Exception exception)
               System.out.println(exception.toString());
     public static void main(String[] args)
          javax.swing.SwingUtilities.invokeLater(new Runnable()
               public void run()
                    createAndShowGUI();
Execution result:
C:\tmp\CrystalJavaTest>java -classpath .;./WEB-INF/lib;./WEB-INF/lib/ReportViewe
r.jar;./WEB-INF/lib/jrcerom.jar;./WEB-INF/lib/jrcadapter.jar;./WEB-INF/lib/Concu
rrent.jar;./WEB-INF/lib/CrystalCharting.jar;./WEB-INF/lib/CrystalCommon.jar;./WE
B-INF/lib/CrystalContentModels.jar;./WEB-INF/lib/CrystalExporters.jar;./WEB-INF/
lib/CrystalExportingBase.jar;./WEB-INF/lib/CrystalFormulas.jar;./WEB-INF/lib/Cry
stalQueryEngine.jar;./WEB-INF/lib/CrystalReportEngine.jar;./WEB-INF/lib/CrystalR
eportingCommon.jar;./WEB-INF/lib/icu4j.jar;./WEB-INF/lib/keycodeDecoder.jar;./WE
B-INF/lib/log4j.jar;./WEB-INF/lib/MetafileRenderer.jar;./WEB-INF/lib/rasapp.jar;
./WEB-INF/lib/rascore.jar;./WEB-INF/lib/rpoifs.jar;./WEB-INF/lib/Serialization.j
ar;./WEB-INF/lib/URIUtil.jar;./WEB-INF/lib/xercesImpl.jar;./WEB-INF/lib/xml-apis
.jar JRCTest
Starting
Crystal Report Viewer 2.1.21.2
java.vendor = Sun Microsystems Inc.
java.version = 1.4.2_13
os.name = Windows XP
os.version = 5.1
os.arch = x86
ReportViewerBean.init
new ReportClientDocument
Openning Report...
logon...
ReportClientDocument.getReportSource
viewer.setReportSource
ERROR - JRCAgent1 detected an exception: Unable to load database connector 'com.
crystaldecisions.reports.queryengine.driverImpl.DriverLoader'.
        at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwRepo
rtSDKException(Unknown Source)
        at com.businessobjects.reports.sdk.b.i.if(Unknown Source)
        at com.businessobjects.reports.sdk.b.i.a(Unknown Source)
        at com.businessobjects.reports.sdk.b.i.byte(Unknown Source)
        at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unkno
wn Source)
        at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
        at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
        at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
        at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unkno
wn Source)
        at com.crystaldecisions.sdk.occa.report.application.ReportSource.getPage
(Unknown Source)
        at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource
.getPage(Unknown Source)
        at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReport
Source.getPage(Unknown Source)
        at com.businessobjects.crystalreports.viewer.core.rs.b.if(Unknown Source
        at com.businessobjects.crystalreports.viewer.core.av.a(Unknown Source)
        at com.businessobjects.crystalreports.viewer.core.av.run(Unknown Source)
        at java.lang.Thread.run(Thread.java:534)
Unable to load database connector 'com.crystaldecisions.reports.queryengine.driv
erImpl.DriverLoader'.

After I switched the report to use JDBC, I am still getting the same error.
Machine has multiple jdk, oracle 10g, Oracle11g client installed though. So I need to set my path to use the jdk from Crystal Report and Oracle 10g.
The program was compiled and ran with the following path and CLASSPATH:
set path="C:\Program Files\Business Objects\j2sdk1.4.2_08\bin";"C:\Program Files\Business Objects\j2sdk1.4.2_08\jre\bin";"C:\Program Files\Business Objects\j2sdk1.4.2_08\jre\bin\client";c:\oracle\ora102\bin
set CLASSPATH=.;./WEB-INF/lib;./WEB-INF/lib/ReportViewer.jar;./WEB-INF/lib/jrcerom.jar;./WEB-INF/lib/jrcadapter.jar;./WEB-INF/lib/Concurrent.jar;./WEB-INF/lib/CrystalCharting.jar;./WEB-INF/lib/CrystalCommon.jar;./WEB-INF/lib/CrystalContentModels.jar;./WEB-INF/lib/CrystalExporters.jar;./WEB-INF/lib/CrystalExportingBase.jar;./WEB-INF/lib/CrystalFormulas.jar;./WEB-INF/lib/CrystalQueryEngine.jar;./WEB-INF/lib/CrystalReportEngine.jar;./WEB-INF/lib/CrystalReportingCommon.jar;./WEB-INF/lib/icu4j.jar;./WEB-INF/lib/keycodeDecoder.jar;./WEB-INF/lib/log4j.jar;./WEB-INF/lib/MetafileRenderer.jar;./WEB-INF/lib/rasapp.jar;./WEB-INF/lib/rascore.jar;./WEB-INF/lib/rpoifs.jar;./WEB-INF/lib/Serialization.jar;./WEB-INF/lib/URIUtil.jar;./WEB-INF/lib/xercesImpl.jar;./WEB-INF/lib/xml-apis.jar;C:/oracle/ora102/jdbc/lib/ojdbc14.jar
I modified my java testing program to display more info:
Modified program:
import java.awt.*;
import javax.swing.*;
import java.io.*;
import com.crystaldecisions.ReportViewer.*;
// Use this for talking to JRC in-process
import com.crystaldecisions.reports.sdk.*;
import com.crystaldecisions.sdk.occa.report.reportsource.*;
import com.crystaldecisions.sdk.occa.report.exportoptions.*;
import com.crystaldecisions.sdk.occa.report.data.*;
import com.crystaldecisions.sdk.occa.report.lib.PropertyBag;
import com.crystaldecisions.sdk.occa.report.lib.IStrings;
public class JRCTest2
   private static void createAndShowGUI()
      try
         System.out.println("Starting");
         //Make sure we have nice window decorations.
         JFrame.setDefaultLookAndFeelDecorated(false);
         //Create and set up the window.
         JFrame frame = new JFrame("JRCTest2");
         frame.setTitle("Testing 1, 2, 3");
         frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
         System.out.println("new ReportViewerBean");
         ReportViewerBean viewer = new ReportViewerBean();
         System.out.println("ReportViewerBean.init");
         viewer.init(new String[0], null, null, null);
         System.out.println("new ReportClientDocument");
         ReportClientDocument rpt = new ReportClientDocument();
         try
             System.out.println("Openning Report...");
             rpt.open("JRCTestReport.rpt", 0);
         catch (Exception ex)
            System.out.println("Failed to open report");
            System.out.println(ex.toString());
            return;
         try
            // try logon here to see if any exceptions
            rpt.getDatabaseController().logon("myUser", "myPass");
         catch (Exception ex)
            System.out.println("Failed to logon");
            System.out.println(ex.toString());
            return;
         IDatabase idb = rpt.getDatabaseController().getDatabase();
         Tables dtb = idb.getTables();
         IConnectionInfo conInfo = dtb.getTable(0).getConnectionInfo();
         PropertyBag attrs = conInfo.getAttributes();
         conInfo.setPassword("myPass");
         conInfo.setUserName("myUser");
         IStrings s = attrs.getPropertyIDs();
         for (int i=0; i < s.size(); i++)
            System.out.println(s.getString(i));
            System.out.println(attrs.getStringValue(s.getString(i)));
         System.out.println(" ");
         conInfo.setAttributes(attrs);
         attrs = conInfo.getAttributes();
         s = attrs.getPropertyIDs();
         // Print property again after setting attributes
         for (int i=0; i < s.size(); i++)
           System.out.println(s.getString(i));
           System.out.println(attrs.getStringValue(s.getString(i)));
         System.out.println(" ");
         System.out.println("ReportClientDocument.getReportSource");
         IReportSource rptSource = rpt.getReportSource();
         viewer.setReportSource(rptSource);
         frame.getContentPane().add
     (viewer, BorderLayout.CENTER);
         frame.setSize(700, 500);
         frame.setVisible(true);
         viewer.start();
      catch (Exception exception)
         System.out.println(exception.toString());
   public static void main(String[] args)
      System.out.println("main");
      javax.swing.SwingUtilities.invokeLater(new Runnable()
         public void run()
            createAndShowGUI();
Running result:
C:\tmp\CrystalJavaTest>java JRCTest2
main
Starting
new ReportViewerBean
Crystal Report Viewer 2.1.21.2
java.vendor = Sun Microsystems Inc.
java.version = 1.4.2_13
os.name = Windows XP
os.version = 5.1
os.arch = x86
ReportViewerBean.init
new ReportClientDocument
Openning Report...
Trusted_Connection
false
Server Name
dbHost
Connection String
Use JDBC=b(true);Connection URL=s(jdbc:oracle:thin:@dbHost:1521:myDB);Database Class Name=s(oracle.jdbc.OracleDriver);Server=s(dbHost);User ID=s(myUser);Password=;Trusted_Connection=b(false);JDBC Connection String=s(!oracle.jdbc.OracleDriver!jdbc:oracle:thin:/@dbHost:1521:myDB)
Server Type
JDBC (JNDI)
Database Class Name
oracle.jdbc.OracleDriver
Use JDBC
true
URI
!oracle.jdbc.OracleDriver!jdbc:oracle:thin:/@dbHost:1521:myDB
Database DLL
crdb_jdbc.dll
Trusted_Connection
false
Server Name
dbHost
Connection String
Use JDBC=b(true);Connection URL=s(jdbc:oracle:thin:@dbHost:1521:myDB);Database Class Name=s(oracle.jdbc.OracleDriver);Server=s(dbHost);User ID=s(myUser);Password=;Trusted_Connection=b(false);JDBC Connection String=s(!oracle.jdbc.OracleDriver!jdbc:oracle:thin:/@dbHost:1521:myDB)
Server Type
JDBC (JNDI)
Database Class Name
oracle.jdbc.OracleDriver
Use JDBC
true
URI
!oracle.jdbc.OracleDriver!jdbc:oracle:thin:/@dbHost:1521:myDB
Database DLL
crdb_jdbc.dll
ReportClientDocument.getReportSource
ERROR - JRCAgent1 detected an exception: Unable to load database connector 'com.crystaldecisions.reports.queryengine.driverImpl.DriverLoader'.
        at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown Source)
        at com.businessobjects.reports.sdk.b.i.if(Unknown Source)
        at com.businessobjects.reports.sdk.b.i.a(Unknown Source)
        at com.businessobjects.reports.sdk.b.i.byte(Unknown Source)
        at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
        at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
        at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
        at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
        at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
        at com.crystaldecisions.sdk.occa.report.application.ReportSource.getPage(Unknown Source)
        at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.getPage(Unknown Source)
        at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.getPage(Unknown Source)
        at com.businessobjects.crystalreports.viewer.core.rs.b.if(Unknown Source)
        at com.businessobjects.crystalreports.viewer.core.av.a(Unknown Source)
        at com.businessobjects.crystalreports.viewer.core.av.run(Unknown Source)
        at java.lang.Thread.run(Thread.java:534)
Unable to load database connector 'com.crystaldecisions.reports.queryengine.driverImpl.DriverLoader'.
Also got similar error when the path and classpath was switched to Oracle 11g.
Is there a way to tell which file that it failed to load?
Thanks
Kin

Print from ipad if i connect a usb connector to my ipad can i connect my printer to it and print??as im thinking of buying the new ipad for work but i must be able toprint

hi can any one help i want to get the new ipad for work but i need to print.i see i can buy a usb connector can i print if i plug my printer into the usb.

If you have a USB printer connected to your computer, Mac or PC, you can activate or install AirPrint and print from your iPad over wifi without any special apps.
Activate AirPrint in Mac OS X;
http://netputing.com/airprintactivator/
Add AirPrint to Windows;
http://jaxov.com/2010/11/how-to-enable-airprint-service-on-windows/

Error while creating azure service bus connector

Hi,
I get below error while creating SB connector-
{"status":"Failed","error":{"code":"ResourceDeploymentFailure","message":"The resource operation completed with terminal provisioning state 'Failed'."}}
Screenshot below-

Unfortunately it still fails with same error. It took quite a long time before failing.
{"status":"Failed","error":{"code":"ResourceDeploymentFailure","message":"The
resource operation completed with terminal provisioning state 'Failed'."}}

Error while adding a connector for SSL..help!!!

i'm getting this error when i added a connector for SSL and restarted tomcat
my connector tag is
<Connector keystorePass="kalima" scheme="https" port="8443" sslProtocol="TLS" redirectPort="-1" enableLookups="true" keystoreFile="Mykeystore" protocol="TLS" keystore="C:\Documents and Settings\santhoshyma\Mykeystore" clientauth="false" algorithm="SunX509" keypass="changeit" secure="true" keytype="JKS">
      <Factory className="org.apache.coyote.tomcat5.CoyoteServerSocketFactory" keystorePass="kalima" keystoreFile="C:\SSLTest\Mykeystore"/>
    </Connector>
LifecycleException: Protocol handler instantiation failed: java.lang.NullPointe
rException
        at org.apache.coyote.tomcat5.CoyoteConnector.initialize(CoyoteConnector.
java:1368)
        at org.apache.catalina.core.StandardService.initialize(StandardService.j
ava:609)
        at org.apache.catalina.core.StandardServer.initialize(StandardServer.jav
a:2384)
        at org.apache.catalina.startup.Catalina.load(Catalina.java:507)
        at org.apache.catalina.startup.Catalina.load(Catalina.java:528)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:324)
        at org.apache.catalina.startup.Bootstrap.load(Bootstrap.java:250)
        at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:424)

The question is answered in CRM 7.0 forum:
Getting error while adding a custom field (with input help) through AET

OIM 9.1.0 with Database User Management: Connector Exception upon Connect

Hi,
I've been struggling with the Database User Management connector (9.0.4) with Sybase, following the steps word-for-word as per the documentation (Oracle® Identity Manager Connector Guide for Database User Manage Release 9.0.4; E10425-0; July 2009).
When defining the IT Resource through the Install Connector wizard, I get the following when it does a connection test:
14:51:52,795 ERROR [WEBAPP] Class/Method: CreateITResourceAction/testConnectivityForDataBase/ClassNotFoundException encounter some problems: No ClassLoaders found for: com.sybase.jdbc2.jdbc.SybDriver
java.lang.ClassNotFoundException: No ClassLoaders found for: com.sybase.jdbc2.jdbc.SybDriver
even though I've ensured jconn2.jar is in the ThirdParty directory, reflushed the cache, and restarted OIM; the connector still can't seem to load the driver.
I've tried the database testing script with similar results.
Any thoughts?
Cheers
Simon
PS: I believe v5.5 of JConnect (as required by the OIM Connector) has been EOL'd and Sybase. They recommend you use v6.0 (v6 is jconn3.jar)), which from what I can see should work as com.sybase.jdbc3.jdbc.SybDriver; I tried that as well but had the same ClassNotFoundException.

I've fixed it; needed to copy jconn2.jar into the $JBOSS_HOME/lib directory and restart the server.

Error while provisioning a resource through generic connector

Hi All,
I installed the DBAT 9.1.0.5.0 connector after copying the mysql-connector-java-5.1.21-bin.jar file in the ext folder of the java installation that i use on the OIM machine. Now when i provision this generic connector resource through the resources tab, it stays in the provisioning stage. When i look at resource history, i see that the create user and child tables inserts are shown as rejected. Also the error when i open the rejected cause is:
Response: GCPROV.ProvTransportProvider.DBProvisioningTransport.DB_STATUS_FIELD_LOOKUP_ERROR
Response Description: Unknown response received
Error Details
Setting task status... "GCPROV.ProvTransportProvider.DBProvisioningTransport.DB_STATUS_FIELD_LOOKUP_ERROR" does not correspond to a known Response Code. >Using "UNKNOWN".I find the following logs in the OIM diagnostics: (my host name is test and the table name is newtable in the database. While creating the connector i dont get any error as such)
Class/Method: DBFacade/getConnection encounter some problems: No suitable driver found for mysql://test/newtable[[
java.sql.SQLException: No suitable driver found for mysql://test/newtable
at java.sql.DriverManager.getConnection(DriverManager.java:602)
at java.sql.DriverManager.getConnection(DriverManager.java:154)
at org.apache.commons.dbcp.DriverManagerConnectionFactory.createConnection(DriverManagerConnectionFactory.java:51)
at org.apache.commons.dbcp.PoolableConnectionFactory.makeObject(PoolableConnectionFactory.java:290)
at org.apache.commons.pool.impl.GenericObjectPool.borrowObject(GenericObjectPool.java:840)
at org.apache.commons.dbcp.PoolingDataSource.getConnection(PoolingDataSource.java:95)
at com.thortech.xl.gc.impl.common.DBFacade.getConnection(Unknown Source)
at com.thortech.xl.gc.impl.common.DBFacade.getMetadata(Unknown Source)
at com.thortech.xl.gc.impl.common.DBFacade.getDBType(Unknown Source)
at com.thortech.xl.gc.impl.common.DBFacade.getSchema(Unknown Source)
at com.thortech.xl.gc.impl.prov.DBProvisioningTransportProvider.getSchema(Unknown Source)
at com.thortech.xl.gc.impl.prov.DBProvisioningTransportProvider.sendData(Unknown Source)
at com.thortech.xl.gc.runtime.GCAdapterLibrary.executeFunctionality(GCAdapterLibrary.java:574)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpMYSQLCONNECTOR_GTC.GENERICADAPTER(adpMYSQLCONNECTOR_GTC.java:125)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpMYSQLCONNECTOR_GTC.implementation(adpMYSQLCONNECTOR_GTC.java:70)
at com.thortech.xl.client.events.tcBaseEvent.run(tcBaseEvent.java:196)
at com.thortech.xl.dataobj.tcDataObj.runEvent(tcDataObj.java:2492)
at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(tcScheduleItem.java:2919)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(tcScheduleItem.java:553)
at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:604)
at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
at com.thortech.xl.dataobj.tcOrderItemInfo.processChildTableChange(tcOrderItemInfo.java:655)
at com.thortech.xl.dataobj.tcOrderItemInfo.eventPostInsert(tcOrderItemInfo.java:184)
at com.thortech.xl.dataobj.tcUDProcess.eventPostInsert(tcUDProcess.java:236)
at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:604)
at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
at com.thortech.xl.dataobj.tcTableDataObj.save(tcTableDataObj.java:2906)
at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.addProcessFormChildData(tcFormInstanceOperationsBean.java:1929)
at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.addProcessFormChildData(tcFormInstanceOperationsBean.java:1593)
at Thor.API.Operations.tcFormInstanceOperationsIntfEJB.addProcessFormChildDatax(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy377.addProcessFormChildDatax(Unknown Source)
at Thor.API.Operations.tcFormInstanceOperationsIntfEJB_h6wb8n_tcFormInstanceOperationsIntfRemoteImpl.__WL_invoke(Unknown Source)
at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
at Thor.API.Operations.tcFormInstanceOperationsIntfEJB_h6wb8n_tcFormInstanceOperationsIntfRemoteImpl.addProcessFormChildDatax(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
at $Proxy178.addProcessFormChildDatax(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:198)
at $Proxy375.addProcessFormChildDatax(Unknown Source)
at Thor.API.Operations.tcFormInstanceOperationsIntfDelegate.addProcessFormChildData(Unknown Source)
at com.thortech.xl.webclient.actions.DirectProvisionUserAction.handleVerifyProcessData(DirectProvisionUserAction.java:2093)
at com.thortech.xl.webclient.actions.DirectProvisionUserAction.goNext(DirectProvisionUserAction.java:363)
at sun.reflect.GeneratedMethodAccessor3947.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:269)
at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(tcLookupDispatchAction.java:133)
at com.thortech.xl.webclient.actions.tcActionBase.execute(tcActionBase.java:894)
at com.thortech.xl.webclient.actions.tcAction.execute(tcAction.java:213)
at org.apache.struts.chain.commands.servlet.ExecuteAction.execute(ExecuteAction.java:58)
at org.apache.struts.chain.commands.AbstractExecuteAction.execute(AbstractExecuteAction.java:67)
at org.apache.struts.chain.commands.ActionCommandBase.execute(ActionCommandBase.java:51)
at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
at org.apache.commons.chain.generic.LookupCommand.execute(LookupCommand.java:305)
at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
at org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:283)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1914)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:463)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at com.thortech.xl.webclient.security.CSRFFilter.doFilter(CSRFFilter.java:78)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.iam.platform.auth.web.PwdMgmtNavigationFilter.doFilter(PwdMgmtNavigationFilter.java:122)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.iam.platform.auth.web.OIMAuthContextFilter.doFilter(OIMAuthContextFilter.java:108)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
[2012-09-11T17:05:56.287+05:30] [oim_server1] [ERROR] [] [OIMCP.DATC] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: afe85475fa0d4a6c:5cb6bbbf:139b19b5dd1:-8000-00000000000041eb,0] [APP: oim#11.1.1.3.0] Class/Method: DBProvisioningTransportProvider/sendData encounter some problems: DB_GET_CONNECTION_ERROR[[
com.thortech.xl.gc.exception.DBException: DB_GET_CONNECTION_ERROR
at com.thortech.xl.gc.impl.common.DBFacade.getConnection(Unknown Source)
at com.thortech.xl.gc.impl.common.DBFacade.getMetadata(Unknown Source)
at com.thortech.xl.gc.impl.common.DBFacade.getDBType(Unknown Source)
at com.thortech.xl.gc.impl.common.DBFacade.getSchema(Unknown Source)
at com.thortech.xl.gc.impl.prov.DBProvisioningTransportProvider.getSchema(Unknown Source)
at com.thortech.xl.gc.impl.prov.DBProvisioningTransportProvider.sendData(Unknown Source)
at com.thortech.xl.gc.runtime.GCAdapterLibrary.executeFunctionality(GCAdapterLibrary.java:574)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpMYSQLCONNECTOR_GTC.GENERICADAPTER(adpMYSQLCONNECTOR_GTC.java:125)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpMYSQLCONNECTOR_GTC.implementation(adpMYSQLCONNECTOR_GTC.java:70)
at com.thortech.xl.client.events.tcBaseEvent.run(tcBaseEvent.java:196)
at com.thortech.xl.dataobj.tcDataObj.runEvent(tcDataObj.java:2492)
at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(tcScheduleItem.java:2919)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(tcScheduleItem.java:553)
at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:604)
at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
at com.thortech.xl.dataobj.tcOrderItemInfo.processChildTableChange(tcOrderItemInfo.java:655)
at com.thortech.xl.dataobj.tcOrderItemInfo.eventPostInsert(tcOrderItemInfo.java:184)
at com.thortech.xl.dataobj.tcUDProcess.eventPostInsert(tcUDProcess.java:236)
at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:604)
at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
at com.thortech.xl.dataobj.tcTableDataObj.save(tcTableDataObj.java:2906)
at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.addProcessFormChildData(tcFormInstanceOperationsBean.java:1929)
at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.addProcessFormChildData(tcFormInstanceOperationsBean.java:1593)
at Thor.API.Operations.tcFormInstanceOperationsIntfEJB.addProcessFormChildDatax(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy377.addProcessFormChildDatax(Unknown Source)
at Thor.API.Operations.tcFormInstanceOperationsIntfEJB_h6wb8n_tcFormInstanceOperationsIntfRemoteImpl.__WL_invoke(Unknown Source)
at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
at Thor.API.Operations.tcFormInstanceOperationsIntfEJB_h6wb8n_tcFormInstanceOperationsIntfRemoteImpl.addProcessFormChildDatax(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
at $Proxy178.addProcessFormChildDatax(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:198)
at $Proxy375.addProcessFormChildDatax(Unknown Source)
at Thor.API.Operations.tcFormInstanceOperationsIntfDelegate.addProcessFormChildData(Unknown Source)
at com.thortech.xl.webclient.actions.DirectProvisionUserAction.handleVerifyProcessData(DirectProvisionUserAction.java:2093)
at com.thortech.xl.webclient.actions.DirectProvisionUserAction.goNext(DirectProvisionUserAction.java:363)
at sun.reflect.GeneratedMethodAccessor3947.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:269)
at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(tcLookupDispatchAction.java:133)
at com.thortech.xl.webclient.actions.tcActionBase.execute(tcActionBase.java:894)
at com.thortech.xl.webclient.actions.tcAction.execute(tcAction.java:213)
at org.apache.struts.chain.commands.servlet.ExecuteAction.execute(ExecuteAction.java:58)
at org.apache.struts.chain.commands.AbstractExecuteAction.execute(AbstractExecuteAction.java:67)
at org.apache.struts.chain.commands.ActionCommandBase.execute(ActionCommandBase.java:51)
at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
at org.apache.commons.chain.generic.LookupCommand.execute(LookupCommand.java:305)
at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
at org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:283)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1914)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:463)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at com.thortech.xl.webclient.security.CSRFFilter.doFilter(CSRFFilter.java:78)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.iam.platform.auth.web.PwdMgmtNavigationFilter.doFilter(PwdMgmtNavigationFilter.java:122)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.iam.platform.auth.web.OIMAuthContextFilter.doFilter(OIMAuthContextFilter.java:108)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: java.sql.SQLException: No suitable driver found for mysql://test/newtable
at java.sql.DriverManager.getConnection(DriverManager.java:602)
at java.sql.DriverManager.getConnection(DriverManager.java:154)
at org.apache.commons.dbcp.DriverManagerConnectionFactory.createConnection(DriverManagerConnectionFactory.java:51)
at org.apache.commons.dbcp.PoolableConnectionFactory.makeObject(PoolableConnectionFactory.java:290)
at org.apache.commons.pool.impl.GenericObjectPool.borrowObject(GenericObjectPool.java:840)
at org.apache.commons.dbcp.PoolingDataSource.getConnection(PoolingDataSource.java:95)
... 116 more
Can someone please help me with this? I am totally stuck here.
Thanks

Got the errors.
1) DB_STATUS.. error was coming since the lookup I gave there was not actually created in the database due to a refresh I did while creating it effectively deleting all the entered data.
2) The error in logs was coming due to wrong input of the GTC database provider during the creation of IT Resource.

M.2 connector in Portg Z30-A?

Similar Messages

Maybe you are looking for