M.2 for MSI H97 Gaming 3
planning to buy Crucial m550 M.2 , is there any incompatibility? will everything be fine?
Everything will work fine, no compatibility issues to be expected. Just note that Crucial M550 will offer the same performance no matter the connection. So the M.2 version won't be faster than the SATA version as it uses the same controler that can't take advantage of the PCI-E connection.
Similar Messages
-
MSI H97 GAMING 3 Intel H97 With 2GB Asus GTX 760 DirectCU
ust built my pc got it working with onboard grapics when i plug the dvi into the graphics card i get no display the HDD has a fresh install of windows 7 i haven't installed any drivers for the mobo or the GPU, im also using a fairly old VGA monitor and im using a VGA TO DVI connector.
specs
8GB (2x4GB) Corsair DDR3 Vengeance
Intel Core i7 4770K Quad Core
2GB Asus GTX 760 DirectCU II OC, 28 1
MSI H97 GAMING 3 Intel H97 (Socket 1150) DDR3 ATX Motherboard
This card has to be compatible with this board right? it can't be that issue?Quote from: Nichrome on 27-October-14, 23:23:26
Hi,
Yes both are compatible.
What is your power supply?
Also did you try any different cable for video between GPU and TV/monitor? Maybe try different monitor too.
Hello ah, so the card and the MoBo are compatible? thats great!
PSU is Corsair CX750M 750W ATX 80+ Bronze PC Power Supply
also i will try a newer monitor that just has a DVI wire rather than using a converter -
New bios availible? MSI H97 Gaming 3
Hi
new bios availible? MSI H97 Gaming 3
actual bios 1.81B1.8 official is out http://www.msi.com/support/mb/H97-GAMING-3.html#down-bios
-
Uefi gop for msi gtx770 gaming
Please can i have the vbios for my card?
s/n: 602-v282-28sb1308026747
Msi gtx770 gaming.
Thx.Hi,
I got this message in the nvflash,
NVIDIA Firmware Update Utility (Version 5.142)
Checking for matches between display adapter(s) and image(s)...
Adapter: GeForce GTX 770 (10DE,1184,1462,2825) H:--:NRM B:01,PCI,D:00,F:00
WARNING: Firmware image PCI Vendor ID (0000)
does not match adapter PCI Vendor ID (10DE).
WARNING: None of the firmware image compatible PCI Device ID's
match the PCI Device ID of the adapter.
Adapter PCI Device ID: 1184
Firmware image PCI Device ID: 0000
WARNING: Firmware image PCI Subsystem ID (A500.E844)
does not match adapter PCI Subsystem ID (1462.2825).
WARNING: Firmware image Board ID (0000) does not match adapter Board ID (E12D).
PCI Device ID override detected.
(This is usually only needed for very special circumstances.)
Are you sure you want to continue?
Type "YES" to confirm (all caps):
Can i continue with the update ??
THX -
MOVED: MSI H97 GAMING 3 Intel H97 With 2GB Asus GTX 760 DirectCU
This topic has been moved to GAMING Motherboards.
https://forum-en.msi.com/index.php?topic=184389.0Quote from: Nichrome on 27-October-14, 23:23:26
Hi,
Yes both are compatible.
What is your power supply?
Also did you try any different cable for video between GPU and TV/monitor? Maybe try different monitor too.
Hello ah, so the card and the MoBo are compatible? thats great!
PSU is Corsair CX750M 750W ATX 80+ Bronze PC Power Supply
also i will try a newer monitor that just has a DVI wire rather than using a converter -
MOVED: UEFI/GOP for msi gtx770 gaming
This topic has been moved to GAMING Graphics Cards.
https://forum-en.msi.com/index.php?topic=254605.0Use the attached.
Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
Then flash the included file with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash -
Latest BIOS for MSi GTX980 Gaming 4G
Hi
as some others have done and to try and solve the no display ports working issue.
this is the bios reported via GPUZ = 84.04.28.00.F6
uploaded here https://mega.co.nz/#!JBZznaDa!aRhWJ-CQqwvsrDTYieLWcmg-5gjiNVFusMeBQ95H6FY
could you please advise if its the latest and supply a link to the latest BIOS and instruction on how to install, thanks.Hi Svet,
As advised by MSI live update I've upgraded from 143 to 113 bios.
Seems to have solved the problem of not having a signal to my 4K monitor through DP on boot.
Also no problems so far...
I've read several posts about this being the wrong bios for my serial #.
My serial is 602-V317-15SB.....
Can you please confirm that I have the correct bios?
Thanks! -
17" Backpack for MSI Notebook Gaming Series
Hello MSI fans!
I have bought my MSI Notebook 5 years ago and I very proud of this brand.
However, it is time to change my backpack I received with it. This is the model:
I would like to replace it with this model:
The official website does have a page where you can view it but no buying options are listed.
http://eu.msi.com/html/popup/nbac/
Are there any chances to buy one of these bags separately?Quote from: dgauser10786;54079
Hello MSI fans!
I have bought my MSI Notebook 5 years ago and I very proud of this brand.
However, it is time to change my backpack I received with it. This is the model:
[ATTACH=CONFIG]2097[/ATTACH]
I would like to replace it with this model:
[ATTACH=CONFIG]2098[/ATTACH]
The official website does have a page where you can view it but no buying options are listed.
http://eu.msi.com/html/popup/nbac/
Are there any chances to buy one of these bags separately?
Right Here
http://www.tecs.com.au/shop/msi-notebook-backpack-up-to-17-3-gaming-g-series-black-with-red-trim.html -
[REQ] Latest UEFI BIOS for MSI GTX770 Gaming 2GB OC
Hi, guys
I need to bring to the life bricked GTX770 Gaming 2GB OC so I need latest vbios.
S/N: 602-V282-220Bxxxxxxxxx
Thanks a lot !this one is the latest version:
https://forum-en.msi.com/index.php?topic=182093.msg1308154#msg1308154 -
Re: Is there a BIOS alternative for "MSI 990FXA Gaming" to boot with FX-9590 CPU
Quote from: ibrahimkazanci on Today at 19:11:35I agree but if I pay for this, I want to use it till burn...
Well if that is your wish maybe someone that is familiar with modding BIOS can help.
Can't you t...Well without drivers even worst PSU will not cause crash when using high end GPU. But once you install them, GPU uses actual amount of power.
-
[Request] Vbios for MSI 280x Gaming 3G OC
Hello,
I need a vbios for said card.
The S/N is: 602-V277-28SB1312065791
There is the GPU-Z thingy, at the bottom.Quote from: ruta.andrea on Today at 10:01:29
you are sure that i have a > 1.2 version??? mmm...
your boards BIOS should be Version 1.4 out of the box as 1.4 was the current BIOS version being flashe... -
[request] Need Vbios for MSI GTX660 Gaming edition.
For some reason friend updated me wrong vBios and now its all messed up and now in CPUtech its says i have subvendor gigabyte.. The hell.
My S/N:602-v287-33SB1311053620Quote from: Svet on 13-January-14, 23:11:08
try flashing the card by placing at secondary PCI-E slot,
and boot PC from 1st PCI-E card who has another working card installed
then try to reflash the one with wrong/failed flash
Kinda tried that but how can i flash the secondary card without risking accidentaly flashing the card that im booting with?
Kinda need the new bios rom to be sure its right now. Serial number is in the first post.
How can i flash the broken card if i have the boot card on it now? So what im asking how i can flash specific card and not the the one that this is runing with? -
What is the best memory kit for MSI Z97 Gaming Series with 4790K?
What is the best and most stable kit in each category?
1. 4x8Gb
2. 4x4Gb
3. 2x8GbNot really good idea. It's temporary usage, and instead of RAMDisk I suggest you buy SSD of SATA III or M.2 depending on what motherboard you have. Go for 16Gb, and buy 120Gb SSD, it will be more efficient. Also you won't get much difference between starting game like Battlefield 4 on SSD and RAMDisk.
Or buy 2x60Gb SSD, 1 for OS and 1 for apps so OS drivers doesn't mix together with games etc. -
Re: MSI H97 Gaming 3 - Directx 12 + Windows 10 + Multi GPU
I doubt it's going to be possible to run nvidia and amd/ati gpu at the same time..
Quote from: david on Today at 13:11:02Hi shaggyfox44,
If I understand, it sounds like you bought a new modem/router instead of re-using your previous one. The fact that the new one is an identical model is ... -
Ask for help: NEW PC (MSI H97 Gaming3) would not boot
Dear all, I am skilled computer person. I my life I did build many computers. But this time I have an issue with power up and boot.
I have components:
1) new MSI mainboard H97 Gaming 3
2) new INTEL CPU Core i5 4460 BOX with default fan and heatsink
3) new MSI VGA 285 R9 (working in other computer so VGA is OK)
4) new 1600 MHz RAM ADATA CL9 2x4GB set. I also tried RIPJAWS CL7 2x4GB 1600MHz
To be exact I did test these two RAM sets: RIPJAWS G.SKILL F3-1280CL7D-8GBXM and ADATA AX3U1600W4G9-DMV CL9.
5) new 700W power source 90+ efficiency. I tried other Power source (got same error with MSI H97) which works in other computer, so the issue does not seem to be the power source.
This is the behaving of the new system: on Power ON the all componets switch on, fan rotate the Sound Boost light up in red, but all run only for 3s and than automatically switch off. After 2s it automatically start again and switch on for 3s and again switch off and on again and again and again same in cyrcle. When I push Power off button for 5s it completely power Off. The Debug LED blink for 16x times.
I tried to power on without the VGA MSI 285 R9. Same issue as with VGA pluged in.
When I put the RAM out, the computer starts and buzzer beep like there is no RAM, so normal behaving. But with RAM inserted it behaves strange. I did test two set of RAM with CL7 and CL9 all 1600 MHz. Is there any limitation for 1600MHz and CL ? Should I try 10CL or 11CL ? Or limitation in 2x4GB sets? I did not find any such information in any manual for the H97 Gaming 3 board.
I tried to reset the BIOS by shorten the pins, has no effect on the problem.
I was thinking about some low fan rotation protection but I do not think this should be a problem?
I can not find anywhere the debug LED coder for H97. There is no LED display like Z97 has, only one single led that blinks. In my case blinked 16x.
Can you help me? What can be wrong and prevents normal boot?
Thank you a lot
OttoI have read this post https://forum-en.msi.com/index.php?topic=252119.0
there is about a hard plug of the 24pin power connector to the board. In my case the 24pin connector is also very hard to plug into the board. But I tried to plug it without damaging the board by force. So it should fit inside. But I will try to check again.
Maybe you are looking for
-
I just downloaded some groove templates from LogicCafe.com and ran into something quite disturbing and or interesting. So the file downloaded to my desktop... its a .lso file named MPC3000Q.lso. I double clicked it and it opens fine in L8... there ar
-
How to get the file name?
Hoe to print the file name of the program we are running???
-
XQuery in BEA 9.2 classpath problem - can anyone help?
Im trying to execute and XQuery in a custom control called from a pageflow actrion. No matter where i put the saxon8 jars, i get the error below. They are in the Eclipse project properties, on my Win XP classpath, on the Weblogic server classpath, in
-
What Macs will mountain lion support
What Macs will mountain lion support
-
My screen saver is showing internet radio....
My screen saver is showing internet radio instead of pictures after the update. How do i turn it off? I have went thru every menu and have all the settings the way they have been Prior to the latest update. now the screen saver is always Internet rad