M-Audio 1814 Issue

I upgraded to Leopard. I've been experiencing a series of crashes that I've traced to the M-Audio Firewire 1814 interface. I installed the combo updates for LEOPARD, and ensured I had M-Audio's latest drivers for the FIREWIRE 1814.
Currently the M-Audio device is plugged into the 400 bus in back of the G5(Late2005)
With TIGER, there was a routine that I had to follow to avoid crashes (e.g. always turn on any firewire or usb peripherals first prior to the M-Audio device). Now with the LEOPARD upgrade, there is no mercy - I've tried everything, including the Hokey Pokey.
Issues include:
- Logic Pro 8 (2.02) plays sporadically (if the M-Audio device is removed things runs smooth)
- iTunes will not play if the M-Audio device is attached. Again, if the device is removed things run smoothly.
- When either of those two programs do play for any extended period, the BLACK SCREEN OF DEATH comes down and I have to restart.
- After disconnecting the M-Audio device. The system appears to run normal.
The FIREWIRE 1814 has normally been very good as a MIDI interface and an input/output device.
I'm frustrated. After sorting thru this issue for over a month - I'm still not closer to resolution and I don't have the $$$ to put into a new card.

I think you've already established where the problem lies. The driver for your device is not compatible with the rest of your system.
You say you have downloaded the latest driver, but it might be worth checking the website for known issues & bug reports, & that the driver you downloaded really is the most compatible one for your system.
Also — sometimes these things take time to sort out, so a fixed driver may not appear immediately…
Hopefully, you won't have to ditch the interface just because of a software glitch. That would be chucking the baby out with the bath water!

Similar Messages

M-Audio 1814 FireWire issue

I've got my M-Audio 1814 plugged into the back of my Mac Pro with a 6 to 9 pin FireWire cable. Whenever I plug in any other kind of FW peripheral, my box starts freaking out and my sound cuts in and out. I have the latest drivers installed but can't figure out what else I should do. Any ideas?

Yes, according to MAUDIO Drivers @ http://www.m-audio.com/index.php?do=support&tab=driver&serie_ID=2&PID=3dd58569d8 828cee4e812013e47dbb55&OS=77#tabs
Your audio device has been supported throughout Mac OS 10.5.2/.3/.4/.5 and now Mac OS 10.5.6 with the MAUDIO Drivers. The thing of it is, the Mac Pro (Early 2008) have been around all that time and has supported Mac OS 10.5.2/.3/.4/.5 and now supports Mac OS 10.5.6. So, bugs and issues have been worked out throughout all those MAUDIO driver updates for the Mac Pro (Early 2008). I am certain that the driver would be more reliable from MAUDIO for Mac OS 10.5.5 on a Mac Pro (Early 2008) 8 Core 3.2 GHz or 8 Core 2.8 GHz. The Mac Pro (Early 2009) was only just released with a customized version of Mac OS 10.5.6 only for the new Mac Pro (Early 2009). Whether or not MAUDIO provides the driver support reliably for the customized version of Mac OS 10.5.6 only for the new Mac Pro (Early 2009) is an expensive question to answer. So, the MAUDIO drivers are suited better for the Mac Pro (Early 2008) model. The hardware has been around longer and I have had no issues with my system for Apple Logic Pro and other audio production software on my Mac Pro (Early 2008) 8 Core 3.2 GHz. Besides, you won't need to deal with issues to do with using a 6 to 9 pin FireWire cable on the Mac Pro (Early 2008). They provide two firewire 400 and two firewire 800 ports.

Audio synch issues in QT

My project displays fine in PE8. No audio synch issues in the preview. After outputting the project to a quicktime movie withe LAN setting the audio becomes seems to run faster than the video, becoming more and more out of synch as the movie plays. Any ideas what might cause such an issue?

The Stream info in MPEG streamclip for files from both cameras gives me this info:
Bitrate: 30.31 Mpbs
Video Tracks:
DV/DVCPRO - NTSC, 720x480, 16:9, 29.9699999999999 fps, 28.77 Mbps
Audio Tracks:
16-Bit Little Endian mono, 48 khz, 768 kbps
I don't know if this helps.

Routing Sound Output - M-Audio 1814

Hello,
Just got a Mac Book Pro and am using an M-Audio 1814 as my sound card. The 1814 is connected to my stereo via s/pdif, but I cannot for the life of me figure out how to change the output in the system preferences so sound from the web, itunes etc. comes through the s/pdif output rather than the analog channels.
Any ideas?
Thanks!

Problem solved...this was the answer for future folks in need:
In the FW 1814 control panel set the the Digital Port Selection to SPDIF
Set the SPDIF input port to the desired selection
Then go into you computers HD and go to Applications>utilities> Audio Midi Setup
Mske sure you are in the Audio Devices window and click configure speakers
Set left front to 5 and set right front to 6, then click apply down below
Message was edited by: boggis

M- Audio 1814 Ouput Question

Hello there,
I have M-audio 1814 and apogee mini-me. I cant´see 1814 in my preferences window. In Audio Driver section, there is only built- in audio and apogee mini-me. I use also logic pro 8 and there it works fine. Any ideas?
-Janne-

Hi,
I used to have M-Audio in my workplace...but after having so many problems...and having the techs contradict their own advice...I packed the M-Audio products and bought other stuff (Digidesign).
They "repair" by replacing with new boxes...and the WORST of their problems has always been their software DRIVER implementations...I have no clue why they think replacing hardware when the SOFTWARE is the problem...will fix it.Someone needs to rethink their customer support solutions.
The last straw was when they blamed ProTools(made by AVID,their new owner) of my particular problem,after I had told them I was NOT running ProTools...Again...why are they blaming or pointing their finger at something that has NO bearing on the problem...I gave up at that point.
So,after my illustrious rant,I would recommend you walk,no better yet RUN and get another brand of audio interface.And don't look back,or you might turn to salt...(sorry for all you religoius types out there for the reference).

10.4.10 Audio Popping Issues: Information Check with Internal Speakers

For people with internal speakers, or those without subwoofers: Please read all the way to the bottom to find a test that will determine whether you are also having audio problems, even if you can't hear pops.
We've had a lot of discussion about audio popping due to 10.4.10, and the evidence indicates that the audio circuitry is going to sleep to conserve power, even on AC-only computers like the iMac, Mac Mini, and (at least one) Mac Pro. Some people claim to not have this problem, but I'm wondering if they just aren't noticing it.
Having external speakers with a subwoofer, set to high amplification, are key to obvious detection of the problem. Let the sound subsystem go idle for 30+ seconds (wait a minute with no audio, just to be safe), turn up your external speakers really loud, and cause the computer to make a sound. You should hear a burst before the sound plays. If you repeat the sound, you won't hear the burst. This is the sound of the audio circuitry powering on, and the speakers are amplifying it.
About 30 seconds after the sound finishes playing, if you leave the volume of your speakers turned way up, you should hear a "pop" as the circuitry is powered off. Then, playing another sound will recreate the burst.
I haven't been able to hear these sounds with internal speakers, either on the Mini or iMac. But the problem still exists, and it is detectable... if you know what you are looking for.
The burst of the audio circuitry turning on also causes a delay in the audio. The delay is a noticeable fraction of a second, an it can easily be detected if you have a repeatable source of sound. I like Terminal.app, because I use that application all day, every day. Here is how you can check to see if you are also subject to the audio problems:
1. Start Terminal.app (in the /Applications/Utilities directory).
2. Wait one minute for the audio circuitry to shut down.
3. Without typing anything else, very quickly strike and release the Backspace key.
4. If you pressed the key all the way, the program should have caused a beep. However, if the audio circuitry goes to sleep, the beep should occur after you have moved your hand off the key. This is because the circuitry takes time to power itself on before playing the sound.
5. Now, quickly strike the Backspace key again. You should notice that the sound is produced immediately as you hit the key, without the delay you just witnessed.
6. Strike the Backspace key repeatedly, to confirm that there is no audio delay. Do this about once every second or two. If you press the key too rapidly, not all of the presses will produce sounds... this behavior is not related to the issue we are testing.
7. Wait another minute for the audio circuitry to shut down, and strike the Backspace key once more. You should again observe a delay between your strike and the sound production.
If you witness delays like this, your audio circuitry is also going to sleep, and you are having the same audio problems as the rest of us. However, either because you are using internal speakers, or because your external speakers don't have the appropriate response, you aren't hearing the same bursts and pops as the rest of us.
Please try this test, and report here. I want to build a list of people who previously couldn't hear the sounds, but still have the delay. This might give us a better picture of the scope of the problem.

Re: 10.4.10 Audio Popping Issues: Information Check with Internal Speakers
Your analysis of what is happening is right on.
The problem on my Intel Mac mini with external Klipsch speakers (two mid-range/high and a subwoofer) is REAL obvious as the system emits a hum like a Spinal Tap amplifier turned up to #11 when 10.4.10 powers down the audio circuitry
Then, if I play a song in iTunes, it first pops and the hum disappears right before playing.
Quite annoying.
Here's what I sent to Apple tech support:
Guys/Gals (OS X Engineers):
Concerning the Snap, Crackle Pop Audio problem in the 10.4.10 update:
Please. Just do the right thing and fix the audio.
There is no need to power cycle the audio subsystem to save .0005 amps on your laptops.
And then to make your Mac mini/iMac/other desktop users have to put up with it when using AC power is ridiculous.
Put the audio subsystem back like it was in 10.4.9 and let the laptop battery freaks looking for mini-amp savings get a "work-a-round".
Crikey!
Mac Mini 1.83 Ghz Intel Core Duo 1GB RAM Mac OS X (10.4.9) 20 Years of Microsoft-Induced Grey Hair

Playback pauses and audio sync issues with live video stream

I'm seeing playback pauses about every three seconds and audio sync issues with our live demo stream when using the OSMF/Strobe player. It happens on both our 2Mbps 720p stream and our 480p 750Kbps stream so it does not seem to be related to higher resolution/bandwidth streams. It also happens if I point directly to a stream asset or if I point to a .f4v with both streams listed for dynamic so it does not seem to be related to dynamic streaming specifically.
The same live streams play back very well without pauses or audio sync issues in the Akamai's dynamic player and even slightly better with JW 5.2.
I have viewed the OSMF/Strobe playback on three different laptops of various age (3 months to 2 years) and two are Windows and one is Linux. I have also tried the various buffering options on the Flash Media Player Setup and Strobe setup and it has not made a noticeable difference.
To see the stream with the Akamai player, go to: http://live.kulabyte.com
To see the stream with the OSMF/Strobe player, go to: http://live.kulabyte.com/osmf
I do not have JW set up for public viewing yet, but the two above show the distinct difference.
We are really hoping to start pointing our customers towards the OSMF player because of the support provided by the community and Adobe, but we have to get the quality of the playback to be acceptable first.
If someone has ideas on debugging I can PM the actual video assets to you.
Thanks,
Tim

Hi Tim,
You need to add this setting:
dynamicStreamBufferTime=8
The actual value can be higher or lower. The best practice is to use a value that is twice the keyframe distance. Anyway, try different values and see which performs the best for your content.
I know that the setup page does not contain this option and it is not documented in the UserGuide. We simply missed it. Sorry.
Also note that the dynamic buffering algorithms are not being used for dynamic streaming content. I tried to explain this here:
https://sourceforge.net/adobe/smp/wiki/Dynamic%20Buffering/
Looking forward to your confirmation that this solved your issue.
-Andrian

Flv audio sync issues & player 9

Greetings, I've been looking for a solution for weeks, and
thought I'd give the forums a shot.
I have a client site with 6 progressively downloaded flv
clips that play when a button is clicked.
The flv files are encoded with After Effects 6.5, and the swf
files are published in Player 8.
The video clips are made with an alpha channel of a guy
talking and are about 30 sec to 1 minute long each.
The problem is audio sync issues on certain computers during
playback even when the files are completely buffered.
The other problem is that these flv files won't play on
computers that have player 9 loaded.
I'm investigating whether there are audio sync issues when
encoding flv files from AE 6.5, but still really
confused about the player 9 issue. I was wondering if there
are updates to 9 I can recommend to my client
or if adobe knows of any bugs that are currently being looked
into.
Thanks,
Kevin

I may just be talking to myself here, but...
Could there be any difference in the way an flv plays when
you
import the flv to the stage, as opposed to playing it
dynamically
using the NetStream class? Could this cause any audio sync
issues? Does Flash Player 9 have any difficulties displaying
flv files loaded dynamically?
Any ideas from Adobe folks would be great. Thanks.

Quicktime audio sync issues

Hello,
I have quicktime version 10 (128). I can't get anything to play in it without there being severe audio sync issues every time. I can't figure out why. Can someone please help me fix this problem?
When I export my movies from imovie to quicktime it will play in quicktime, properly and without sync issues, for a really short period of time - seconds. But after that, the audio no longer matches the video. I know it's an issue in QT because when I upload the video to YouTube there are no audio sync issues whatsoever.
Help?
Thank you so much,
YahYah

I am dissapointed to see that no one has addressed this issue. I have similar issues.
The MP4's play perfectly in the quicktime player but in Premiere they are off by varying degrees sometimes up to a minute even. I had similar problems in the past with files from the same producer. However last time I was able to change the extension before importing and then sync them up manually on the timeline. It worked everytime. This time however when I change the extension Premiere brings it in as an audio only file.

MP4 Video from Flip Ultra having Audio Sync Issues

All of sudden I've started having audio sync issues with the mp4 footage exported from the The Flip Ultra camera. Ive tryed the mp4 footage in both windows 7 and Mac OS X and i'm having the same audio issue but when I watch in the flip software or in iMovie no issues. Any know why this has just started happening?

Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1

Audio Sync Issue on Export

Hello,
I have an issue with an export that I am attempting to do. I have used 50 still photos (psd) and created a slide show in after effects. It is working well. I attempted to create 4 comps made from standard dv footage. 720 x 480 from video cameras in the 1990s. I need to export out eventually to 1920 x 1080 for showing on our TV channel. It would be a .m2t format. When i attempted to do a test export, everything worked fine....the photo comps were good, the only problems were the video clips that had video/audio sync issues.
I am not sure what the problem is exactly. I feel my workflow is not right and that is leading to this issue.
I created the 50 slide comps in AE
I then used the hour long DV clips in PrPRO to make sub clips (about 30 seconds each, total of 8)
I rendered these out to then import into AE
imported into AE and made comps out of them
then render out a test file that would be my finalproject in mpeg format.
I would like to not render the video a second time and would like, basically to take my AE photo comps straight to prmiere pro to insert the DV footage but don't know how exactly to do that.
Is there something that you can recommend.
Thanks,
M

We need to know a lot more to help you. Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"

Trouble exporting 11-min film as XML because of audio translation issue

Hi, I am trying to export a short film XML file of approximately 11 minutes for a sound engineer and it's coming up with a ton of audio translation issues.
Can I attach the report and someone help me? Most of the issues are audio tracks from ADR but I recorded them with the same H4Zoom I used for the original, and some were the original production audio to which I applied the DeNoiser effect. They're all stereo files with the exception of a few mp3s which were special effect sounds. Why are they not being translated? What can I do to get this into an .xml?? It looks like somewhere between 100-150 audio files were not translated.

are you using merged clips? premiere merged clip XML issue
if the sound engineer will take another format, premiere can export OMF or if you have audition you can open the OMF in audition and export it as a fcp xml.

So frustrating that nobody knows why. Audio Sync issue.

I have an imovie project of old family footage that was ported over from VHS through a sony dcr pc120e mini dv cam straight through to intel imac via firewire. The imovie project is flawless and the sound is perfectly in sync. ive exported to idvd and when finished the audio is out of sync on the final disk. Now i have been reading about this issue and see that people blame idvd8 but it happens when i make a dvd with my imovie project using toast titanium 9 too. Surely if it plays perfectly as an imovie project there must be a way of transferring to dvd without audio sync issues. If anyone knows a solution or piece of software that will remedy this please please let me know as i have wasted about 12 dvds in various experiments.

mogreen wrote:
camcorder on 16bit, i am using a vhs player attacthed to camera then firewire to imac, ... the imovie project is perfect in everyway. Everything is pal. Yes i did export to QT within IM and this was also out of sync.
thanks for answering some of my Qs ...
there's one thing, I do suspect, which was a 'source' for sync-weirdness for years.. which is the AUDIO connected to some video.
you told us, video is 25fps, and audio is included 16bit (which is good...)
I assume, adding some NON-conform audio could cause trouble... (as a 12bit audio would cause outofsynciness) .. we do know very little about, how iM08 handles audio+video internally, we 'Silverbacks' had long discussions about really weird side effects as a 'zooming' of dvfiles on export etc. I wouldn't be surprised, if adding some non-iTS, non-48kHz-aiff, non-whatever... causes such an effect.
so, please answer my audio Q from above: source, format, bitrate...?
and just for curiosity: how long is your project in total? hh:min:sec?
==edit==
pops into mind: in iM vers3, there was some 'bug', concerning PAL wrong audio and NTSC good audio ... wow < scratching bald head > .. try to contact some wiseguy with better memory..
Message was edited by: Karsten Schlüter

Help please... Audio sync issues going from iMovie to iDVD (iLife '09 packa

I've tried technical support, I've tried looking online but nothing seems to have helped, so here's the problem:
I have a video/movie, that is around 58 minutes long, I share it to iDVD and the other media formats from iMovie. The vid has music, transitions, titles, credits, etc... It plays fine in iMovie while I am editing it. The problem comes when I try to export it to another media format and to iDVD.
There's a section that has major audio sync issues that I have no idea how to even begin to fix. There is audio and music from the 55 minute mark that plays over the 27 minute mark for a good 3 minutes of video and audio.
I've tried some of the suggestions I've come across but nothing seems to work. Does anyone have anything that they can offer this very frustrated guy? Please and thank you in advance.

I don't shoot 12 bit audio (ever) so I'm not an expert on fixing it or converting it back to 16 bit audio. I can only report what others on this forum claim to have worked (in some cases with marginal success).
The ones that comes to mind are:
1. video and audio extraction in an attempt to re sync.
2. exporting back to the camera from iMovie and then re-importing as 16 bit.
http://support.apple.com/kb/TA25603?viewlocale=en_US
http://discussions.apple.com/thread.jspa?messageID=8113985
Message was edited by: SDMacuser

Why does embedded video cause audio sync issues?

Greetings all,
   I have a question that is perhaps best answered by an Adobe developer or someone who knows the SWF file format and various audio/video standards fairly well. When one drags an FLV file into the library in flash authoring tool, a window appears. If you click "Embed FLV in SWF and play on timeline", an awful message appears, "WARNING: Embedded video is likely to cause audio synchronization issues...". My question is: why would there be any audio synchronization issue? Is this really just a bug/unimplemented feature? Or is there some fundamental shortcoming of current versions of the SWF file format that does not allow for the FLV audio/video signals to be properly encoded in the SWF file? Or is it that the flash player plays SWF and FLV data in fundamentally different ways and that even if the audio/video is perfected sync'd in the SWF file, the fact that it's a SWF file causes flash player to lose sync?
   I'm guessing only a Flash developer could answer this (and probably not just any Flash developer!), so if there are any out there, please spare some wisdom for a poor lost SWF surfer.
   Thanks!

Hi:
Welcome to discussions!
From what I am reading, you are trying to use the audio that was in the original video-right? By that, I mean, you haven't added a voice over or music-just using the speaker's voice on the tape.
If so, you might want to try using something like a Fade Out or Fade In instead of one of the transitions that add or subtract to the length of the video
[Quoted from iMovie Help]
Some transitions (for example, Cross Dissolve and Push) shorten your movie by a few seconds, depending on the speed of the transition. For example, if you add a transition with a speed of 2 seconds, iMovie overlaps 2 seconds from the first clip and 2 seconds from the second clip as it renders the transition. This shortens your movie by a total of 2 seconds.
The Overlap transition freezes the last frame of the clip on its left and superimposes it over the next clip. Fade In/Fade Out blackens the last frames of the clip on the left and the first frames of the following clip.
[End quote]
Or you could try extracting the audio from the movie so that you could edit it and sync it that way.
Sue

M-Audio 1814 Issue

Similar Messages

Maybe you are looking for