M-Audio Controller and Transport controls?

I know how to set other parameters to be controlled by my controller (m-audio axiom 49), but I can't figure out how to set the transport controls. Any help or ideas? Thanks!
iMac Core2Duo Mac OS X (10.4.8)

I went through the same process, of confusion, then figuring it out, with my new Oxygen 49. One question I never did get answered (despite two emails to M-Audio--no response at all): when I use the Transport controls on my Oxygen 49 in Logic, while running Reason in rewire mode, the transport controls do not work in Logic (Logic receives the commands, but is flakey as heck).
Any ideas?

Similar Messages

Multimedia Audio Controller, and Video Controller(VGA compatible) are missing on Windows XP(32Bit) SP3

Hi.
My Desktop Computer(Intel P 4, 512MB of RAM, and Graphics Card with 256MB of RAM)
Also, My Desktop Computer with P 4 doesn't have any access internet since there is no network adapter is installed. As a result, I would not be able to run the pc scan utility, or Reader a web-based applet that identifies my GPU or Audio controller
and finds the latest graphics driver for my GPU, and Audio.
I have two Windows XP installations:
Windows XP SP2(32Bit) which is old and it seems it infected by some viruses.
I have installed another fresh clean Windows XP(32Bit) SP3. However, I have two devices not detected well by Windows XP.
First of all, when saying that I have multi-operationgs systems, I mean there are two operating systems installed on my PC(SP2, SP3) both are 32Bit. The first Windows SP2(NOT installed by me) has all multimedia audio card installed well,
and has SCSI and RAID Host Controller shown the device manager. However, only the VGA is not installed on Windows SP2. However, the second one Windows SP3(Installed by me) has VGA not installed, Multimedia audio NOT installed, and there is no SCSI and RAID
Host Controller in device manager.
First: Yes, my motherboard has integrated video, and integrated audio card
According to the screen shots above, then
The vendor ID of Multimedia Audio Controller is 8086 and the device ID is
24D5.
The vendor ID of Video Controller is 8086 and the device ID is
2572.
I AM EXPECTING THAT KNOWING THE VENDOR ID AND THE DEVICE ID WILL LET ME QUICKLY FIND THE APPROPRIATE DRIVER. HOWEVER, I COULDN'T FIND THE APPROPRIATE DRIVER.
Thus, could you please help me to find them?
I have tried installing a soundMAX card driver, however, I found this error.
I have checked the other Windows XP SP2(32Bit) which is oder installed, and it seems it infected by some viruses.
However, the Multimedia Audio on that Windows is installed well. As here: I only posted these screen shots to show what kind of device is Multimedia Audio Card
The motherboard model is:
Belarc Advisor Computer Profile
Operating
System
System
Model
Windows XP Professional
Service Pack 3 (build 2600)
Install Language: English (United
States)
System Locale: Arabic (Yemen)
Installed: 22/03/2013 12:03:16
ص
Boot Mode: BIOS (Secure
Boot not supported)
Enclosure Type:
Desktop
Processor
a
Main Circuit Board
b
3.00 gigahertz Intel Pentium
4
16 kilobyte primary memory cache
1024 kilobyte secondary memory
cache
64-bit ready
Hyper-threaded (2 total)
Board: 775i65G.
Bus
Clock: 200 megahertz
BIOS: American Megatrends Inc. P3.00
03/20/2007
Drives
Memory Modules
c,d
39.99 Gigabytes
Usable Hard Drive Capacity
29.48 Gigabytes Hard Drive Free
Space
COMPAQ CD-ROM LTN486S [Optical drive]
3.5" format removeable
media [Floppy drive]
WDC WD400BB-75DEA0 [Hard drive] (40.00 GB) -- drive
0, rev 05.03E05, SMART Status:
Healthy
504 Megabytes Usable
Installed Memory
Slot 'DIMM0' has 512 MB
Slot 'DIMM1' is
Empty
Local Drive
Volumes
c: (NTFS on drive 0) *
20.98 GB
14.16 GB free
d: (NTFS on drive 0)
19.01 GB
15.33 GB free
<center>
* Operating System is installed on
c:
</center>
Network
Drives
None
discovered
Users
(mouse over user name for details)
Printers
local user
accounts
last logon
عايض
لرضي
19/01/2015 10:59:17 م
(admin)
local system
accounts
Administrator
never
(admin)
Guest
never
HelpAssistant
never
SUPPORT_388945a0
never
<center>Marks
a disabled account; Marks
a locked account </center>
Controllers
Display
Standard floppy disk
controller
Intel(R) 82801EB Ultra ATA Storage Controllers
Primary IDE
Channel [Controller]
Secondary IDE Channel [Controller]
None
discovered
Bus
Adapters
Multimedia
Intel(R) 82801EB USB
Universal Host Controller - 24D2
Intel(R) 82801EB USB Universal Host
Controller - 24D4
Intel(R) 82801EB USB Universal Host Controller -
24D7
Intel(R) 82801EB USB Universal Host Controller - 24DE
Intel(R)
82801EB USB2 Enhanced Host Controller - 24DD
None
discovered
Virus
Protection [Back to Top]
Group
Policies
Norton AntiVirus Version 18.1.0.37
 Virus Definitions Version Not Up To Date
 Realtime File Scanning
On
None
discovered
Communications
Other
Devices
↓ Realtek RTL8139 Family PCI Fast
Ethernet NIC
Status:
Cable unplugged
Dhcp Server:
none responded
Physical Address:
00:19:66:1F:F7:54
USB Human Interface
Device
Standard 101/102-Key or Microsoft Natural PS/2
Keyboard
HID-compliant mouse
USB Root Hub (5x)
USB Storage Use in past 30 Days(mouse
over last used for details)
Hosted Virtual Machines (mouse over
name for details)
Last
Used
SanDisk Cruzer Blade, s/n
4C532000020502112303, rev 2.01
19/01/2015
09:32:57 م*
USB 2.0 USB Flash Drive, s/n
59309e92e21612, rev 0.00
09/01/2015
12:29:17 ص*
<center>* Possibly used again before the reboot following this
time.</center>
None
discovered
See your entire
network map...
click for Belarc's System Management products
A man should convert his anger and sadness into strength to continue living in this life.

Dont worry, dont think anyone was as a matter of fact
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=908&jump= true#M908
http://support.microsoft.com/default.aspx?scid=kb;en-us;80509
http://support.microsoft.com/default.aspx?scid=kb;en-us;84567
that worked for me, maybe it will help someone else that went through what i did, its a miracle i did not top myself after going through all this BS. ALSO dont threaten your computer with violence, cos it will always call your bluff which makes things worse

OS X 10.5.6: High RAM usage corrupts Audio Playback and Volume Control

Software Effected or Related:
iTunes 8.1, Quicktime 7.4, Adobe CS3
Description:
Basically any RAM intensive operation seems to corrupt the sound driver so that static is injected into the stream. In addition, volume control fails to function, with decrease of volume controls resulting in a louder more corrupted signal being sent to the speakers.
Attempted Fixes:
RAM swapped, no effect.
Permissions repaired, no effect.
PR Zapped, no effect.
Reinstalled OS, no effect.
Workaround:
It's in no way ideal, but once the corruption occurs, a reboot of the machine will restore function until the next RAM intensive operations causes the problem again. It's at best an annoying band aid.
Notes:
I'm not really expecting a solution, more as I want to find out if anyone else is having a similar issue to my own. If this system behavior sounds familiar, please reply and let me know about your system. This behavior only started for me when my company migrated to OS 10.5. A downgrade is not an option, due to software compatibility issues. Thanks for your attention.

I am having that exact same issue with my new MacBook Pro. I notice faint bursts of static like the audio is trying to break through and then it is lost all together. I trash my sound prefs (both Library/Preferences and ~/Library/Preferences and reboot which corrects it, but then it happens again within a few days (or hours)... what gives? What is corrupt and what file do I need to permanently replace? Do I need to call Apple about this on a new machine?
Message was edited by: SWLinPHX

Can Anyone Help Me Set Up My M-Audio Radium As A Control Surface?

Hi Everyone,
I just bought a new keyboard (M-Audio Radium) because the old one died. There's a bunch of knobs and sliders that I hear can be used as a control surface. However, when I follow the manual there seems to be several discrepancies between what it shows and what the Logic-Preferences-Control Surfaces interface shows. So if someone could be so kind as to point me in the right direction as to the proper way to set this up, I'd appreciate it. P.S. The more that you can walk me through it the better. Thanks

I just picked up an Oxygen8v2...it just has 8 knobs and transport controls. First off, I saw a video on a guy using this with Logic, and he opened the Enigma software that is for editing M-Audio controllers. He went to the Keystation88 preset, and there is a Logic template. He just literally copied the item he wanted, say, the Stop button, and then opened the Oxygen8v2 panel and pasted it over the Stop on that template. Seems to make sense, but, I do it, and it doesn't work at all.
So, I just spent an hour figuring this out. Here's the only way so far I got this to work. First off, none of the M-audio boards are in the Controller window, or, they are not Natively supported in Logic. Why? Who knows, they are only the largest supplier of these things. Anyway, for the transport controls, I went to the Key Assignments... window, and found the stop line, clicked on Learn Assignment button, and hit the stop button on my Oxygen8v2. Works great. I did that for all the transport buttons.
Now, of the 8 knobs, the last 2 already seem to control the pan and track levels, just luck I think that the preset controller numbers match Logic's. So, I want to assign one of the other knobs to the Send level of Bus 1, another to Bus 2. Now I had to open the Controller Assignments... window. Clicked on Send 1 in Logic, and the window then said Send 1, I hit Learn, and twiddled the knob, and hit Learn again to stop, and it worked. I did the same for send 2 and knob 2...BUT, something still isn't quite right. The send 1 knob works, but the send 2 knob goes all on and all off when I turn the knob...it's not seeing all the values, just on and off. Tried it 10 times, and it still isn't working. Don't know.
I was very surprised to not find any Logic stuff for these M-Audio controllers. Both are some of the most popular software/hardware out there, yet it's as if Logic doesn't exist to M-Audio (I know, ProTools, ProTools, ProTools...)

Bug in transport controls?

Hi,
I've been going a little crazy trying to get an M-Audio Oxygen's transport controls to sync to Logic. I have MMC engaged, and all of the transport controls work on the M-Audio, and the computer keyboard except 'PLAY.' This will NOT work directly on the computer or on the Oxygen when MMC is engaged.
Any help would be greatly appreciated!
Cheers,
Glenn

I figured it out. For some reason my capture format was set to HDV instead of DV.

Add audio files and control play in pdf

Hi, newbie here. I have a set of large text documents in Word and corresponding mp3 audio files. I am trying to create pdf's with the audio files embedded at specific points in the text. I can put audio in and play it, but there is no controls for the audio. I have seen a pdf file with a play-pause-stopbar that works, but cannot figure out how to do it. Any and all help is greatly appreciated. Using Acrobat Pro7 (can upgrade if needed). Thanks
Just another thought, is there a small flash player that can be mbedded into a pdf?

Thanks. I have upgraded and used the new conversion to Flash for the mp3 and
it works well. The look of the player isn't the greatest but it suits my
needs. Thanks again.

My Apple TV controller stopped working with my tv box. I changed battery. But the remote controller works in the store and it controles my iMac . What is the problem?

My Apple TV controller stopped working with my tv box. I changed battery. But the remote controller works in the store and it controles my iMac . What is the problem?

Hi Ron.
Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

Motion control: PXI 7350 controller and UMI 7774 to interface with third-party driver UDK5114NW2

Dear community,
This is about Motion control in Labview: I try to control a step motor by using a PXI 7350 controller and UMI 7774 to interface with third-party driver UDK5114NW2. The problem is 5 Disable LEDS on UMI 7774 board always lit even when I check "enable" on "Motion I/O setting" in configuration of PXI 7350 motion controller. Furthermore, when I start to control step motor, it is not working and I found disable LED on UMI board still lit. I don't know how to solve this problem. Can someone help me to figure out? Thank you in advance!
Hau Nguyen.

Dear Community,
I said wrong, 4 disable LEDS on UMI 7774 Board instead of 5 as my previous post. Why nobody help me to solve this problem. I can not turn off disable LEDs on UMI 7774 Board so I can not start the strp motor. Please help me!
Hau Nguyen.

Make a audio controller file move with a pan and zoom.

I am using a few folio overlays for a digital publication.
I have an image that uses the pan and zoom overlay.
I would like to add several play buttons for audio that are linked to the image so when you pan the image the audio files move with it.
So far I can only get the audio controller file to be static and the image move under it.

Here's a little trick for you. Before creating a scrolling frame, group the
text frame with a small no fill/no stroke frame. Now you have group in the
frame, you can drag additional objects in using the layers panel.

How do I configure my PCI-GPIB cards so that one is a controller and the other is a device being controlled by the first card

I have 2 PC's, both fitted with PCI-GPIB cards. One will be the system controller and the other will be a device on the GPIB bus. How do I configure both cards using LabWindows/CVI v7.0 to achieve this ? What commands are used to send and receive the data ?

Hi Pete,
For the controller board you don't really need to do anything. By default the GPIB interface is configured as controller.
The non-controller can be configured in MAX. Right-click on the interface, uncheck the ono-controller box and change the primary address. It is usually a good idea to set these parameters programatically. Use ibpad to set the primary address and ibrsc to release system control.
For the controller you can use a device descriptor (using ibdev) or a board descriptor (ibfind).
You can only open a reference to the non-controller board using ibfind (ibfind("gpib0"), for example). This will open a board reference. You cannot use a device reference because that implies that the board is capable of addressing the bus. On
ly the system controller can.
Here are some links I found on the web on this subject:
Passing GPIB Control -- System Controller vs. Controller In Charge
Tutorial: Programmatic File Transfers over the GPIB
Example: Using a C Program as a GPIB Non-Controller with LabVIEW as the GPIB Controller
Example: Serial Polling Between Two Computers (Controller and Non-controller)
Hope this helps.
DiegoF
National Instruments.

Keyboard: audio and Brightness control keys not working with or without fn

The Keys for controling Audio and Brightness (F1-F5) do not work.
Also combined with pressing the "fn" key the keys do not work.
So i only control audio with the remote control or the slider in the menubar.
Making a reboot with deleting pram didn't help.
I'm running the up to date version of leopard on a macbook pro (core2duo).
I also searched in the forum for this problem.
I oten read about "sytem control"-"keyboard and mouse"-"keyboard" and the F1, F2, etc. to use as...
but switching this button on or off doesn't change anything.

problem solved:
the couse was the software update 1.1 for macbook pro, because there i had the problem like in this thread: http://discussions.apple.com/thread.jspa?messageID=6142512&#6142512
and did the solution like that, but there i maybe made some mistakes with renaming and copying, so i rinstalled the update and renamed it a copied to plugins, and now all works as it should.
thanks for help

Multimedia Audio Controller not working..... have installed updates and still not workin

Can someone help me with my multimedia audio controller? I've initially installed the updates from the support page and after reboot the Xi-Fi driver is listed. After installed the console update programme for Xi-Fi extreme music the driver is gone and I get a "Multimedia Audio Controller" instead with a error message.
No matter how many times i try reinstalling and uninstalling it doesn't work.

Hi:
Click on the link below. Accept the agreeement. Download, unzip and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=23&PFid=23&Level=4&Conn=3&DownT...

Req to send my audio drivers and control panel

hello,my audio drivers and control panel were lost due to the attack of trojans.I'm unable to select my required drivers and control panel,because an error report is occuring and is closing the opened window.so i request you to please send me the suitable audio drivers and control panel.my laptop is presario c555nr model.please send them as soon as posible.
This question was solved.
View Solution.

http://h20180.www2.hp.com/apps/Lookup?h_lang=en&h_cc=us&cc=us&h_page=hpcom&lang=en&h_client=S-A-R163...
Are any of these yours ??
You may also try to restore your machine to a point before the trojan attack with Microsoft System restore.
Go to start > all programs > accessories > system tool > system restore.
If the trojan corrupted your system to the point where you can't fix it, then you may have to reload your OS using your HP recovery manager. Save all your personal info. before you do this, as it will be deleted.

Just downloaded Yosemite on my Mac and the Yosemite update for Garage Band. Now when I open an existing Garage Band project and click on a vocal track, a message window says, "Could not find General Audio 10" and have no smart controls. Help?

Just downloaded Yosemite on my Mac and the Yosemite update for Garage Band. Now when I open an existing Garage Band project and click on a vocal track, a message window says, "Could not find General Audio 10" and have no smart controls for that track (reverb, etc.) Help?

Try this fix posted by Robinson Collins:
Re: I downloaded Garage Band 2x and the same note appears: there is no General Audio 10. Please advise. Thank you.
Try this: Go to your menu bar, select "Garageband" and then "Restore Sound Library..."
It can take awhile to download as it's a pretty big library. You might need to also select "Update Sound Library..." after the restore is done.

Package and Folder audio controller

I have a mastro with many audio files (40 mp3 files) linked to the same controller folder button (the folder is called Button).
I do not understand why when i do the package i find the Button folder multiplied (Button _289789388021, etc…see the attachment).
I do not understand if this if correct and if every single new button folder will be uploaded on the producer.
Many thanks.
f

It's a packaging thing. In fact, if you did a file package in CS5/CS5.5
you wouldn't even get the overlay assets.
Bob
Folobo <mailto:[email protected]>
Saturday, December 29, 2012 8:49 AM
>
Re: Package and Folder audio controller
created by Folobo <http://forums.adobe.com/people/Folobo> in /Digital
Publishing Suite/ - View the full discussion
<http://forums.adobe.com/message/4953239#4953239

M-Audio Controller and Transport controls?

Similar Messages

Maybe you are looking for