M-Audio Delta 192 Sound Card With Adobe Audition

I have a m-audio sound card and a mackie pro fx8 mixer, I am running windows7 64-bit. I was wondering how I need to set my preferences in Adobe Audition? When hitting record I am not recording my audio

Make sure that you have the M-Audio ASIO drivers installed. Then under Audition's Preferences/Audio Hardware select ASIO for Device Class and M-Audio ASIO for Device. Under Audio Channel Mapping select appropriate M-Audio inputs and outputs. If you are trying to record in the Mutitrack window make sure you select the correct input for each track. It will probably say Default Stereo Input but you can click on that and select any of the inputs that are available from the Delta 192.

Similar Messages

ALSA is not detecting my M-Audio Delta 1010 sound card (x86-64)

Hi
I've been searching Arch forums and googling for my problem but I can't find a suitable answer.
I installed my M-Audio Delta 1010 sound card on this PC but ALSA doesn't get it to work.
Chipset envy24 / ice1712
On dmesg I find:
$ dmesg | grep -i ice1712
[ 8.135832] snd_ice1712: probe of 0000:05:06.0 failed with error -5
However, it is listed on lsmod:
$ lsmod | grep '^snd' | column -t
snd_hda_codec_hdmi 24529 4
snd_ice1712 59590 0
snd_cs8427 6970 1 snd_ice1712
snd_i2c 4107 2 snd_ice1712,snd_cs8427
snd_ice17xx_ak4xxx 2437 1 snd_ice1712
snd_ak4xxx_adda 8070 2 snd_ice1712,snd_ice17xx_ak4xxx
snd_hda_codec_realtek 61420 1
snd_ac97_codec 113344 1 snd_ice1712
snd_mpu401_uart 5980 1 snd_ice1712
snd_hda_intel 26181 5
snd_hda_codec 98034 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 6429 1 snd_hda_codec
snd_rawmidi 18800 1 snd_mpu401_uart
snd_seq_device 5269 1 snd_rawmidi
snd_pcm 75735 5 snd_ice1712,snd_ac97_codec,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7218 2 snd_pcm,snd_hda_intel
snd_timer 18935 1 snd_pcm
snd 60189 25 snd_ice1712,snd_hda_codec_realtek,snd_ac97_codec,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_i2c,snd_pcm,snd_rawmidi,snd_hda_codec,snd_ak4xxx_adda,snd_hda_intel,snd_mpu401_uart,snd_seq_device,snd_cs8427
I followed some instruction and created a alsa-base.conf file with:
$ cat /etc/modprobe.d/alsa-base.conf
options snd slots=snd_ice1712,snd_hda_intel
options snd_ice1712 index=0
options snd_hda_intel index=1
aplay -l returns:
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 1: SB [HDA ATI SB], device 0: ALC889 Analog [ALC889 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: SB [HDA ATI SB], device 1: ALC889 Digital [ALC889 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
Seems card 0 is reserved for the m-audio card but is not being detected by ALSA
envy24control also exits with:
$ envy24control
No ICE1712 cards found
Finally, my /dev/snd
$ ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 80 Dec 7 20:25 by-path
crw-rw----+ 1 root audio 116, 7 Dec 7 20:25 controlC1
crw-rw----+ 1 root audio 116, 16 Dec 7 20:25 controlC2
crw-rw----+ 1 root audio 116, 6 Dec 7 20:25 hwC1D0
crw-rw----+ 1 root audio 116, 15 Dec 7 20:25 hwC2D0
crw-rw----+ 1 root audio 116, 14 Dec 7 20:25 hwC2D1
crw-rw----+ 1 root audio 116, 13 Dec 7 20:25 hwC2D2
crw-rw----+ 1 root audio 116, 12 Dec 7 20:25 hwC2D3
crw-rw----+ 1 root audio 116, 5 Dec 7 20:26 pcmC1D0c
crw-rw----+ 1 root audio 116, 4 Dec 7 20:26 pcmC1D0p
crw-rw----+ 1 root audio 116, 3 Dec 7 20:26 pcmC1D1p
crw-rw----+ 1 root audio 116, 2 Dec 7 20:25 pcmC1D2c
crw-rw----+ 1 root audio 116, 11 Dec 7 20:27 pcmC2D3p
crw-rw----+ 1 root audio 116, 10 Dec 7 20:26 pcmC2D7p
crw-rw----+ 1 root audio 116, 9 Dec 7 20:26 pcmC2D8p
crw-rw----+ 1 root audio 116, 8 Dec 7 20:26 pcmC2D9p
crw-rw---- 1 root audio 116, 1 Dec 7 20:25 seq
crw-rw----+ 1 root audio 116, 33 Dec 7 20:25 timer
$ ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 80 Dec 7 20:25 by-path
crw-rw----+ 1 root audio 116, 7 Dec 7 20:25 controlC1
crw-rw----+ 1 root audio 116, 16 Dec 7 20:25 controlC2
crw-rw----+ 1 root audio 116, 6 Dec 7 20:25 hwC1D0
crw-rw----+ 1 root audio 116, 15 Dec 7 20:25 hwC2D0
crw-rw----+ 1 root audio 116, 14 Dec 7 20:25 hwC2D1
crw-rw----+ 1 root audio 116, 13 Dec 7 20:25 hwC2D2
crw-rw----+ 1 root audio 116, 12 Dec 7 20:25 hwC2D3
crw-rw----+ 1 root audio 116, 5 Dec 7 20:26 pcmC1D0c
crw-rw----+ 1 root audio 116, 4 Dec 7 20:26 pcmC1D0p
crw-rw----+ 1 root audio 116, 3 Dec 7 20:26 pcmC1D1p
crw-rw----+ 1 root audio 116, 2 Dec 7 20:25 pcmC1D2c
crw-rw----+ 1 root audio 116, 11 Dec 7 20:27 pcmC2D3p
crw-rw----+ 1 root audio 116, 10 Dec 7 20:26 pcmC2D7p
crw-rw----+ 1 root audio 116, 9 Dec 7 20:26 pcmC2D8p
crw-rw----+ 1 root audio 116, 8 Dec 7 20:26 pcmC2D9p
crw-rw---- 1 root audio 116, 1 Dec 7 20:25 seq
crw-rw----+ 1 root audio 116, 33 Dec 7 20:25 timer
controlC0 and pcmC0 is not present!
So, what might be causing the probe error -5?
I really need to get this card working! :S
I have Arch up to date!
Hardware specs:
CPU: AMD FX6100
Board: Gigabyte (can't recall the model) with NVidia chipset
Thank you,

I have an m-audio delta 1010lt as well, it's a great card but it sits in my closet now because I "upgraded" to a motherboard that doesn't have legacy PCI slots. However, I'm pretty sure I remember the card working for me and being "plug and play" under arch with kernel 3.3 or newer. So some things I would consider:
Try checking IRQs, make sure nothing is overlapping.
Try using the LTS kernel, to see if it is kernel related, since ice1712 module should ship with almost any kernel => 2.6.26.
How many watts is the power supply? Sometimes insufficient wattage can result in drivers failing to load.
What other sound cards do you have installed? Have you tried blacklisting all of the other cards in your system using alsa-base.conf? This is a bit extreme, but might be a useful troubleshooting measure, as some people have had issues in the past with alsa indexing mutiple cards to the same slot number

Ask a CS Pro: Intro to Sound Design with Adobe Audition

In this week’s Ask a CS Pro session, Senior Solutions Engineer Colin Smith will provide an introduction to sound design, including matching audio levels, adding foley, understanding effects and mastering for output to video with Adobe Audition CS5.5.
When: Friday, Aug. 26
Time: 12 p.m. -1p.m. PT Session start time for other time zones: http://bit.ly/pb0W9h
Where: Connect Room: http://my.adobe.acrobat.com/askcspro
The room will open up 15 minutes before the session starts.
Update: A link to the session, along with links to more information about the topics covered, is provided in this blog post on Inside Sound.

I don't think this will be on Adobe TV, but you can view the Adobe Connect recording of the session here:
http://bit.ly/askcspro_0826
If the audio stream doesn't play, or loses synch, try moving the playhead forward/backward a bit. That should kick it back into synch.
I plan to have a little guide to the session, along with some helpful links, posted later today.

M-Audio Delta 1010LT driver problems with 10.4.6

I'm having problems with the M-Audio drivers for my Delta 1010LT sound card under 10.4.6. Specifically, I'm getting frequent kernel panics if I try to play sound through the card when I boot up in the morning after the computer has been shut down during the night. I've tried using not only the current version of the Delta driver (2.0.5), but also 2.0.4, 2.0.3, and 2.0.1.
Recently, after being very frustrated with this problem, I requested and received a replacement card from the vendor, since both I and M-Audio Tech Support suspected that I might have a defective card. I have to admit that there seems to be some progress. At least for the time being, I have a working setup for Pro Tools M-Powered 7.1 with driver version 2.0.5 and Mac OS 10.4.6. However, I'm finding that I'm still experiencing frequent kernel panics if I try to play sound through the card (any sound application causes a problem, not just PTMP) when I boot up my computer in the morning. (BTW, I probably wouldn't have this problem if the driver would allow my computer to sleep! But that's another story . . .)
I do have a workaround (at least, it seems to be a workaround, though my past experience leads me to believe that it could cease to be one at any moment): immediately upon starting up, I reinstall the driver. Then everything seems to be OK—unless the system freezes (which it does frequently, and which it didn't before I installed the 1010LT), in which case more often than not I get a kernel panic upon rebooting and have to install the driver again.
Since when it does work, it works very well, I don't think that the problem is with my machine. (I've tried switching slots several times, which does not seem to have an effect.) But something is still clearly not right.
BTW, through a process of trial and error, I've determined that there seems to be a conflict, at least on my system, between the M-Audio Delta drivers (all versions) and Intego VirusBarrier X 4 (and, I think, also ClamXav). I assume, though I can't support the assumption, that they may conflict with other anti-virus software as well. With Mac OS X viruses beginning to appear, this is a serious problem that I think should be addressed very soon!
I'd be interested to hear if other users with Delta 1010LT cards have had similar problems under 10.4.6. I've seen a large number of such items involving 10.4.3 and 10.4.4, but there appear to be few reports of such difficulties with 10.4.6.
MDD dual 1.25 GHz Power Mac Mac OS X (10.4.6)

I finally gave up and ordered a Firewire 410, which works beautifully. Too bad that I wasted $200 on a card that I couldn't use, but . . .

I am getting no signal to my dj mixer using m-audio firewire audiophile sound card connected to my mac book pro using Traktor Dj software can anyone help?

I am getting no signal to my dj mixer using m-audio firewire audiophile sound card connected to my mac book pro using Traktor Dj software can anyone help?
The firewire port reads the dj software and I can hear music playing through the sound card when I plug my headphones into it but there is no signal to the hardware (my dj mixer).
I have reset the firewire by turning off my mac book pro for a few hours and can see the sound card device in the fire wire section after clicking on the apple icon on the top left corner of my mac.
My dj mixer works on another mac computer with the same soundcard and different firewire cable.
Hope someone can help
Thanks
Wayne

kmiddlet88,
yes, it could be due to nearly anything listed in your kernel extensions, startup items, launch daemons, launch agents, or user items above. Please check all of your installed third-party software to make sure that the versions which are installed on your MacBook Pro are compatible with Mavericks; uninstall every software package which isn’t Mavericks-compatible. After you’ve done that, boot into Safe mode, and see if you still get the beach ball of doom there. If it doesn’t appear there, restart normally and see if it appears then.

CUPC - "Phone Error. Could not place call because you have no audio device or sound card."

Periodically throughout the day, CUPC will not make or receive calls, but instead presents a dialog box with the message "Phone Error. Could not place call because you have no audio device or sound card." See attachment.
Signing out of and back into CUPC resolves the issue temporarily.
I have version 8.6.2 installed and I'm using a USB headset.
Does anyone know what might be causing this?

Hi Steve,
I have users reporting this as well with Jabra GN 2000 headsets. They claim using a different headset resolves it which I'm waiting to confirm but I was wondering if you were able to figure this out.
Thanks
Erik

Will FCP X and QT will output audio thru any sound card that the Mac recognizes?

I watch FCP X video on my Mac Pro video monitor.
I want to output the audio thru a sound card to my audio monitor controller. My new digital audio monitor controller connects USB to the Mac, and USB is not an output option with FCP X. So, I need another audio path.
I have previously used a Pro Tools HD Native card for sending FCP X audio out, and this works fine.
I assume that any other sound card that works in the Mac (i.e., compatible and selectible in Mac Pro Sound Preferences) would work with FCP X, but I am just checking to be sure this is right before I buy something.
I am aware of potential sync issues, so I would use only a low latency sound card. The Pro Tools card, for instance, had very low latency and worked fine.

OK, forget it.
I can just use the Mac Pro optical digital out. Doh.
Some days the brain just won't lock into gear.

MB466 sound card with the MB990 is not the same?

MB466 sound card with the MB990 is not the same?
MB466 Audio Equipment ID:0x10DECB79 Audio ID:63
MB990 Audio Equipment ID:0x10DECB79 Audio ID:77

You can enable ClearType system wide for all programs to make other programs like Firefox use it.
* http://support.microsoft.com/kb/306527 - HOW TO: Use ClearType to Enhance Screen Fonts in Windows XP
Control Panel > Display > Appearance > Effects: "Use the following method to smooth edges of screen fonts"

What sound card with DTT3500

what sound card with DTT3500h Hello ,
acatually? my sound card is a sb Li've! 024 player connected to Cambridge Sound Worhs DTT3500 by spdif cable.
I'm on windows XP , and by the and of the year I'll be on windows 7.
Windows? 7 doesn't support my old good sound card <img alt="[/img] src="http://forums.creative.com/i/smilies/6x6_smiley-sad.gif" title="Smiley Sad">
I know that the X-FI card dosn't work with the spdif of the DTT3500 , which leaves me no choice but the audigy card I think.
So the question is : what type of Audigy work well with de DTT 3500 ?
Sorry for my bad english.
Message Edited by angelo_tth on 08-09-2009 05:58 AMMessage Edited by angelo_tth on 08-2-2009 07:02 [email protected]

Yes, DDL works with EAX. That's probably you're best solution. You could either get a Titanium or Prelude, which both come with DDL.
Alternati'vely OEM Xtreme Music and Xtreme Gamer (SB077x series) cards often have optical ports. You could get one of these and add the DDL Pack from Creative (about $5 American). That can work out cheaper than a Titanium or Prelude.
Creative sell a flexijack adaptor giving optical out ports. That will work with most X-Fi models.
If you play a lot of games I would skip the Audigy series and the X-fi Xtreme Audio.

Desktop sound card with lapt

Well.. its time for me to head to college.. so I just got a new laptop with much better specs than my was-amazing-last-year desktop.. And I have an X-fi Fatalty card with which i'm gettin very good latency results..
Skippin most things, my questions are simple:
) Is there a way to use my desktop sound card with my laptop? Any sort of hardware modifications that I can use?
2) If not, is there a way that I can stream the audio directly from my desktop to my laptop without much of a delay?
Thanks.. Any help would be appreciated..

This site (http://harness.gadgetscope.com/view/XFIH-002) sells a cable for this purpose that will work with any SB card with the ten pin white connector on it. Bit expensi've but should do the trick.

I want to use the sound card with LabView

Hi. Who can help me, I want to use the sound card with LabView, I have found the function but I can't use it. Thanks.

Christi,
In LabVIEW 6.1 I found some examples they use those sound VIs. They are located in \examples\sound folder. Those examples should give you a good overview how to use the VIs.
Hope this helps
Roland

!Can you record live while game playing with adobe audition? PLEASE HELP!

Can you record live while game playing with adobe audition? I have a youtube channel and I want to record voice as I'm playing of course and cancel out the noise maybe put a nice effect on it.. But how do I do this? Please help! I only see ones for recording like after.. But I want to record it as it's happening is this possible!? it has to be. thanks *ADOBE AUDITION CC*

That'll depend on the capabilities of the sound card/audio interface you're using. If that interface can feed the right things to Audition, it can record it. For just the game, look for "Wave Out" or "What U Hear" on the list of audio sources but not every system has this. Also, if you want to record your own contributions as well as the game sound, that gets more complex too.
I know that there are specialist pieces of software that are designed to record live gameplay (which don't rely simply on your local sound card). I know of a couple called "Action!" and "XSplite" but I have not personal experience with either.
However, before going that direction, check out the "Record Devices" menu in your sound system and see what it allows.

There is an issue with Adobe Audition CC and OS 10.8.4. Audition will not open?

Apparently there is a problem with Adobe Audition CC and 10.8.4. Audition worked in 10.7 with no problem but after installing 10.8.4 it no longer opens.

might want to ask, did you clone ML with 10.8.3 before upgrading to 10.8.4? sometimes there are issues, and there are with .4 so having a clone of your system prior to update is important. Same for how long to keep a clone of 10.7.5 or even 10.6.8.
if you practice keeping boot drive small it is easy to make a system restore image 50-150GB and keep it somewhere.
CCC clones not just the system but the recovery partition.
keeping all your data and media off the boot drive helps in other ways, like managing maintenance and performance.

Audio Science ASI5111 Sound Card not working with Aud. 3 Multi-track

I am using an Audio Science ASI 5111 Sound Card. I also used Audi
tion 3.0.1 on Windows 7.
The program suddenly freezes when using the ASI driver (not Audition driver) in Multi-track mode.
At times I get the R6025 error

Audio Science is aware of the issue. It has been solved by going back to an older driver. 3.12.07

Sound Card with 2 audio lines IN/

About to build new computer which will contain a large 'Jukebox'. To run through my home theater and receive inputs from my tape player & vinyl record player I need left & right lines in & out. Most sound cards have only one line in & out. What is best option to handle this?

This site (http://harness.gadgetscope.com/view/XFIH-002) sells a cable for this purpose that will work with any SB card with the ten pin white connector on it. Bit expensi've but should do the trick.

M-Audio Delta 192 Sound Card With Adobe Audition

Similar Messages

Maybe you are looking for