M-Audio F/wire 410 conflicts with F/wire Powercore in Logic Pro on iMac G5

Got an M-Audio F/wire 410 connected with a F/wire Powercore to my iMac G5 I.8Mhz with 1GB of RAM. Problem is my Firewire Powercore will randomly get an error message and all Powercore software being used by Logic will suddenly drop out. Tried disconnecting the M-Audio Firewire 410 and using built in audio and didn't get the problem. Are there any settings in logic pro 7.1.1 I can change or is it simply a bandwidth problem due to there only being 1 firewire bus on an iMac? ANy help would be much appreciated!!!

I heard from a friend of a friend of those kinds of dropouts with a Powercore, but that's not very reliable info... have you checked other forums specifically for your hardware?

Similar Messages

Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

The installer for Logic Pro 8 has a bug which keeps it from operating in Lion or Mt. Lion. Use the program Pacifist to install it.

Conflicts with Drive Genius 3 and Mac Pro Tower?

I have been having problems with my MAC for about 7 months. Becomes unresponsive and I get HD disk errors when I run Disk Utility. The only way to repair is to use the Disk utility on my Snow Leopard Install disk. I have been trying to figure out what is going on, and the only thing I can come up with is that there may be a conflict with the Program Drive Genius 3. Has anybody had any similar issues?

your first course of action is to back up any and all data that you have, especially from the affected drive
then, its to ascertain wether the drive is failing or if the system is corrupted. (follow the advice in the other posts)
if the system is corrupted, you just need to reinstall the system (fresh)
if the drive is failing, you can keep the system, by cloning it to another drive. Drive genius does this with the duplicate function. (if you hear about superduper or CCCloner, they do this too)
in any and all cases, when all this is settled, you should have a cloned copy of a working system on another drive (or two). Every month (or few), reclone (backup) your system. When you are about to install a system update, say from 10.6.6 to 6.7, clone before, then update.
you can have multiple systems installed. Each one on its hard drive, or even ten systems on the same hard drive, each one in its own partition, (though if the drive fails, those multiples wont help, on the same drive. Plus, in order to clone, you need different drive. Im just saying its possible.) I use an old 300GB drive partitioned 6 ways, with different cloned instances of various systems. You can choose which system to boot from in the 'startup' pane in system preferences.
for example, when 10.7 Lion comes out, the worse thing you can do is to outright install on top of the existing system. A new system might not work in the beginning for various reasons, hardware or software conflicts, unupdated drivers, etc Before the kinks are worked out, a person might have to go back to a previous copy. Boy, am i sure glad i had that up to the minute clone . . .

Problems with ppc 10.4.11 & Logic Pro

Hey guys, hope someone here can help...
A few days ago I decided to clean re-install OS X 10.4 on my Mac Mini. Previous to this re-install Logic Pro was on the system and working fine so I re-installed the system and installed LP and now the app won't launch, it shows up in the dock a few seconds then disappears...
I read somewhere that I needed to update the system with the latest pro app support (or the latest one according to that version of Logic) so after hours of searching for the pro app support I finally got it installed but the app still won't launch.
Logic Express is also on the system so would this be causing a conflict? I'm not sure what's going on as it's exactly the same version of Logic that was on there before.
Any help would be appreciated as I was looking to use the Mini and Logic Pro on an upcoming recording project as it's a lot easier to move around than the G5!

OK, what you can do now is open up the Console application (in Applications/Utilities ), and find a Logic crash report. Copy the content (on the right) and post that here. There may be clues. No guarantees though...
!http://farm6.static.flickr.com/5054/54666620426206a03783z.jpg!

Can I use my MBox interface with the latest version of Logic Pro X?

Can I use my Mbox interface with the latest version of Logic ProX?

If your Mbox has a Core Audio driver compatible with your version of OSX, then most likely, yes.
J.

Rewire with Ableton Live 8 and Logic Pro 9

Hi guys,
I'm really hoping that somebody can help me with (sorry) a Rewire problem...I am close to tearing my hair out.
I'm trying to Rewire Logic Pro 9 and Ableton Live 8. Before you ask I am using 32-bit Logic, and I am opening up Logic first, then Ableton but I can't seem to get the Ableton Live Rewire channels to appear in the Logic library.
Please help if you can, I'm going steadily insane. Such a waste of my time having to sort this rubbish out.
Cheers!

Hi
Did you run Live without Logic running to get Live to install the necessary Rewire bits and pieces?
You will then need to quit, Live, start Logic start Live.
CCT

A problem with channel strip outputs in Logic Pro 8

I have a Power Mac G5 2.3GHz dual core processor with 2GB memory, running LogicPro 8 connected to a MOTU 2408 Mk3. I originally assigned the outputs on the individual channel strips on my Logic default work page to the individual outputs on the MOTU, (1, 2, 3, 4, etc.,) as this is the optimum configuration for the amount of channels required for the recording I do. Checking theses settings recently though, I find the menu only gives the option to set outputs to 1-2, 3-4, 5-6 & 7-8? What has happened and how can I change them back?
Thanks

Sounds like your channel strips are stereo and not mono.
Click on the little linked circle button (format button) in the bottom of the channel strip to set it's mode to MONO (single circle).
If you have effect plugins inserted on the channel strip make sure they are mono and not stereo. (Click and hold on the effect on the insert slot and choose the mono instance of the plugin from the plugin menu).
Hope that helps
R

Audio to midi error - check conflict with external device - apogee rosetta

hey there
i have a problem and any help is much appreciated..
basically i am running a quad xeon dual 2.66 machine under 10.4.10 and using logic 7.2. 1 gig ram.
i am using a apogee rosetta 800 with the option x firewire card for my audio interface.
whenever i set a track up to record and 'play' logic i get a message saying,
'unable to sync audio to midi check conflict with external device' and then it says something like sample rate 43021 recognised.. something close to 44100 but not quite..
so i think my problem is a clocking/sync one maybe? i have tried everything i could think of, including fixes suggested on the forums here, but nothing so far seems to help e.g making sure autosync in on the transport is unchecked, checking audio MIDI setup.
worryingly with the few problems similar to this on the forums there doesn't seem to be a way to fix it!!
anybody who could help would be a lifesaver.. this is destroying my workflow!! emailed apogee and im waiting for a reply.
thank you very much
richie

Hi,
Ok, then there can be a few more possibilities,
Try this: unplug your Rosetta, and any other FireWire devices you might have. Basicallly you want to start Logic with the internal audio.
If this works ok, then it is not an issue with the Mac's hardware, and is an issue with a FW device.
Then, quit Logic, and plug in the Rosetta by itself. Boot Logic, and select it as the audio interface. Try playing stuff back. does it work? If yes, then the issue is with another FW device. If there is a issue, then there might be a corrupt driver, a bad FW cable, etc. Keep trying one by one to go through re-installing the drivers, and also try changing the FW cable. If this still does not solve it, there might be an issue with the Mac OS 10.4.10. You might need to install Pro App support 4.0. Also, there was a fix available from Apple not so long ago specifically for FW audio devices. Please do a search in Apple's suport site for "FireWire audio device" and see if you find the patch.
If the Rosetta works when it is the only FW device hooked up to the Mac, then you have a conflict with another device, like a FW hard drive, etc... check each one until you find the culprit.
Cheers

How do you get core audio to work with maverick. I'm using logic pro X

i'm having problem with core audio and maverick

It sounds as if you have altered the Tempo after recording the Audio ( but before selecting +Follow Tempo+ ).
This would make your Regions adapt from the old tempo to the new one, therefore changing their timing.
Here's a bit more info:
Audio files recorded in Logic Pro can follow the project tempo—inclusive of tempo changes—set in the global tracks.
+Note: These audio files can also follow the first key signature set in the global tracks.+
As an example: If you record a bass solo at 100 bpm, you can change the project tempo to 120 bpm and the bass solo will automatically be played back at the new tempo.
The function works with all audio files that were recorded in, or bounced/exported from, Logic Pro.
The function only works in the parent project (the project the audio files were created in). If you drag a file recorded in a given project to another project with the Finder, the file can not follow the project tempo.
Bounced or exported files can only follow the project tempo if the “Add resulting files to Audio Bin” option was enabled in the Export or Bounce window—prior to the bounce or export.
Files copied between two projects retain the ability to follow the project tempo.
The project’s tempo information is used to tag the beats in the recording. The function works best if your audio files match the project tempo as precisely as possible. The longer your audio files are, the more RAM is required for this functionality to work properly.

Creative System Information with conflict with Nero Expr

Hi to all,
I noticed that I could not access the Creative System Information (CSI) in the Creative Products tab in the area of Creative software, anything under that. I was able to go to 40 software number but no to the information of each software. The CSI hanged or stopped responding. I needed to close the program. I found the cause of the problem. I encountered the problem so far only when I have Nero Express 6 or demo even Nero 5 installed. When I uninstalled that Nero program, I had access again to all the information under Creative software, 40 of them. It looks that there is conflict between Nero and CSI. Does anybody notice this too? What is going on and what is the solution? You help will be greatly appreciated.
Thanks,
Medico

Solution! I discovered the problem causing the system crash, and I think it is sufficiently interesting to note here so that others may benefit from what I discovered. First, there is no fundamental problem/conflict with the driver for Webcam Live Pro. The trouble in my instance is that I was running another program that utilized the web cam, and that program conflicted with the Webcam Live Pro program that was constantly running in the system tray. Basically, the program in the system tray is loaded with the set-up for Webcam Live Pro. It constantly monitors the computer system to see if the cam is connected to the computer. When it does this while another program is using the cam, the conflict occurs, causing the entire computer to reboot. The solution is to right mouse click the icon for Webcam Live Pro in the system tray, go to settings, and to remove the check that allows the program to check for the presence of the web cam. Just to be safe, I then also exited the Webcam Live Pro program from the system tray so that nothing from that program could interfere with my use of the webcam using another program.
The result is that the webcam is rock solid, with no system crashes. I have been running it nonstop for hours without a problem.
I hope this helps someone else.
Best,
CB

Is GarageBand iOS 2.0.1 compatible with Logic Pro 9.1.8?

I run Logic Pro 9.1.8 on a Mac Pro 1,1 (Snow Leopard 10.6.8) and GarageBand 2.0.1/ iOS (7) on the iPad2. The songs are built on the iPad, then opened in Logic on the Mac. This worked like a charm until recently when the iPad was updated w/ the new GB. Used to just click on the ".band" file, exported from the iPad to the Mac via iTunes, and it would open in Logic (the only audio software on the Mac), but now it asks me to save the file instead of opening it. Then when trying to open the newly saved GB version in Logic you either get a blank arrange screen or Logic crashes and says it needs to be updated.
9.1.8 the latest version of Logic Pro 9, so is it asking me to get Logic 10? If so, it would seem that I need a new Mac as mine is 32-bit and Logic 10 is 64-bit.
Does Apple keep the GB and LP versions concurrent? Meaning that the current GarageBand is compatible w/ the current Logic Pro? The least expensive solution might be to go back to the 8 track GB for iOS, but how can I do that? I do not have that purchase on my app store account any more as it was purchased from a different account that I no longer have access to.
I don't ever remember having to first save the file in LP9 and then check a bunch of boxes in the Advanced section when saving it, but this does work to open the old files (8 track version of GB iOS) . So, I tried again w/ the new GB files (16 track version of GB) and Logic crashed again and said the file was "created on a different version of Logic" please update Logic. With no more updates for Logic Pro 9, it wants LP 10? Which I can't do bc of the specs of my computer.
Your thoughts and ideas are welcomed and appreciated. Thank you.
Mac Pro 1.1 (June 2007)
2x Quad Core 2.66 Ghz Intel Xeon
16 GB RAM
(2) HD's
Audio Drive: WD Caviar Black
Logic 9.1.8
Snow Leopard 10.6.8
iPad2 w/ GarageBand 2.0.1/ iOS 7

Hi Lee,
Thank you. That is a great work around! Yes, where is 1.x that I paid for? Exactly! That would have helped immensely.
I tried to get Garageband iOS 1.x, but could not. Contacted Apple and they said I could book a service call w/ their technical department for about $30USD! For a $5 app that I already paid for?! Are they serious?! I don't even think (even after the $30) they could have done anything. I know, it was just a poor customer service rep and they are just following protocol. I even thought of trading my iPad to someone who hadn't updated their iOS. Then I should have seen the old GB (compatible w/ the old iOS 1.x) in the app store.
My work around:
- Bought a used 2008 64-bit Mac Pro tower on eBay ($700USD w/ shipping).
- Installed Mavericks and GB (free)
- Paid for Logic X ($200)
My 2007 Mac Pro is for sale on eBay! I won't get all of the $ back, but will get some.
Imported my first GB iOS 2.0.1 into Logic X - it wouldn't open! Yet another download was needed for compatibility. So, I just opened the iOS song in GB on the Mac Tower w/ Mavericks. Saved the file in GB then opened it in Logic X. I did download the 1 billion gigs for compatibility for LPX, but have yet to try it. So long as GB does the job, it only takes a few extra secs.
I now have access to LPX Session drummer, which is pretty cool. Sometimes your original beats can work better for the song, but session drummer can help w/ fills, mixing and "real drummer" feel sometimes. Now I combine my ideas w/ theirs. One can even take the orig iPad created drum track and use it as a loop along w/ Session Drummer (which can be a bit more of a live drummer feel).
I too write on the iPad when on the road then dump to the Mac Pro Tower when I get home. I had tried a MIDI device to dump the data from the iPad to the Mac. Didn't work. Spent hours researching which software to use for MIDI. Time is $ so I shelled out the dough. They got me! Sort of I didn't buy a new Mac. I'm selling a whole bunch of old studio gear, that I don't use anyway, to make up the difference in cost.
Thanks for your input. This is my 2 cents. I could write a book about this experience!

Logic Pro X keeps sending C0 notes to midi out when record is armed on a audio track

I have a annoying problem with Logic Pro X, which I bought a month ago. Here's al little scenario that describes the problem.
I disconnect my audio interface, so that Logic Pro has to rely on my MacBook Pro's internal audio. This way I exclude my RME-FF800 from being of any influence.
I start up the Midi Monitor tool, to analyse what comes out of Logic; MIDI-wise.
I start up Logic set up a small test project in Logic Pro X, that contains:1 audio track
There's little button on the audio track with a red-colored "R". This is the button to "arm" this track for recording audio.
I push the little "R" button, the R-character turns white, the button as a whole turns red. The button starts blinking.
From this moment on Logic starts sending MIDI messages ....... huh? Every second or so ... a low C.
In my regular studio setup this means that I hear a low repeated note coming out of my piano, every time I record audio. How annoying!!
By the way ... a Guitar/Bass track has the same problem. All the other track types (External midi, software instrument, drummer) don't have this problem.
Help is deeply appreciated, because it drives me crazy and if I can't fix this .... I think I have to return to my previous DAW-of-choice (Cubase 7.5).
Here's the Midi Monitor output.
20:46:01.241          To MIDI Monitor (midi monitor)          Note On          2          C0          127
20:46:02.008          To MIDI Monitor (midi monitor)          Note Off          2          C0          0
20:46:02.774          To MIDI Monitor (midi monitor)          Note On          2          C0          127
20:46:03.541          To MIDI Monitor (midi monitor)          Note Off          2          C0          0
20:46:04.308          To MIDI Monitor (midi monitor)          Note On          2          C0          127
20:46:05.075          To MIDI Monitor (midi monitor)          Note Off          2          C0          0
20:46:05.841          To MIDI Monitor (midi monitor)          Note On          2          C0          127
20:46:06.608          To MIDI Monitor (midi monitor)          Note Off          2          C0          0
20:46:07.374          To MIDI Monitor (midi monitor)          Note On          2          C0          127
20:46:08.140          To MIDI Monitor (midi monitor)          Note Off          2          C0          0
20:46:08.908          To MIDI Monitor (midi monitor)          Note On          2          C0          127
20:46:09.675          To MIDI Monitor (midi monitor)          Note Off          2          C0          0
20:46:10.441          To MIDI Monitor (midi monitor)          Note On          2          C0          127
20:46:11.208          To MIDI Monitor (midi monitor)          Note Off          2          C0          0
20:46:11.975          To MIDI Monitor (midi monitor)          Note On          2          C0          127
20:46:12.741          To MIDI Monitor (midi monitor)          Note Off          2          C0          0
20:46:13.507          To MIDI Monitor (midi monitor)          Note On          2          C0          127
20:46:14.274          To MIDI Monitor (midi monitor)          Note Off          2          C0          0
20:46:15.043          To MIDI Monitor (midi monitor)          Note On          2          C0          127
20:46:15.808          To MIDI Monitor (midi monitor)          Note Off          2          C0          0
20:46:16.574          To MIDI Monitor (midi monitor)          Note On          2          C0          127
20:46:17.341          To MIDI Monitor (midi monitor)          Note Off          2          C0          0
Logic Pro X = version 10.0.6
Mac Book Pro = late 2008.
Model Name:          MacBook Pro
Model Identifier:          MacBookPro5,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2,53 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache:          6 MB
Memory:          4 GB
Bus Speed:          1,07 GHz
Boot ROM Version:          MBP51.007E.B06
SMC Version (system):          1.33f8
Mac OSX = 10.9.1
System Version:          OS X 10.9.1 (13B42)
Kernel Version:          Darwin 13.0.0
Boot Volume:          Macintosh HD
Boot Mode:          Normal
Secure Virtual Memory:          Enabled

The note is likely being sent out because of a Control Surface you have installed or used.... be it a hardware keyboard, controller or even an ipad controller app... such as Logic Remote or TouchOSC for example... or even an iOS software synth app that is sending midi over wireless....
So.. first make sure you have force quit any iPad/iPhone Logic/midi related apps and not just closed them..
Then if that doesn't fix things.. delete Logic's CS preferences... and Logic's own user preferences too...as described here..
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.
Do not forget to Quit Logic before doing this and then restart the Mac after doing this....

Logic Pro 9.1.3 with Pro Tools HD 8.1.1

Hey guys,
I've been reading all day and hoping I could make this happen but I'm losing hope.
I have an Pro Tools HD 2 system with 8.1.1 and Logic Pro 9.1.3 installed on my computer.
I currently have Logic slaved to pro tools but I can only get sound to come out of the built in output of the speakers which I then record it to pro tools on seperate passes. I'm trying to get my logic instruments to go out seperate audio channels and into seperate audio tracks on Pro Tools.
For example, I want a sound from my exs sampler to be monitored through my pro tools channel 1-2 and a sound from ES1 or some synth to be monitored through channels 3-4.
It would just make things sooooo much easier if this could happen! I also have reason 5 rewired to logic which I wanted to go through logic into pro tools on seperate channels as well.
As of now, I'm using all 3 programs but I have to use just one stereo channel in pro tools to monitor both logic and reason!
Is it possible to assign logic to go out different output channels into different pro tools tracks??????
Thanks much - Oh yeah I'm also on Snow Leopard if that matters.
Josh

Avid dropped support for Logic TDM in Pro Tools HD 8.0.3. You need Pro Tools HD 8.0.1 if you want to use Logic with TDM hardware. Pro Tools HD 8.0.1 is qualified up to OS 10.5.8. Anything else is untested.
Logic followed suit by dropping the DAE menu in version 9.1 or later (gleamed from reading these forums), but annoyingly did not mention anything in their release notes. 9.0.2 is the last official mention of TDM support.
You can always use eight channels of Avid hardware with CoreAudio. By using aggregate IO you can do what you need to with eight channels. If you want to use DAE TDM, the only guarantee is PT HD 8.0.1, Logic 9.0.2, OS 10.5.8.

Can I use a US-122MKII with Logic Pro x?

Hi All!
This is my first time on here so nice to meet you
My question is: Can I use the TASCAM US-122MKII with the new Logic Pro x on an iMac?
I've been using the TASCAM with my old Powerbook running Logic Pro 9 and it worked fine. Now however I can't get Logic Pro x to find it. I've tried scanning for it in the external interfaces section but it wasnt found. The iMac itself does find it and it appears in the system preferences sound section as an input. I've downloaded the latest software from the TASCAM website also.
I'm not very techy so may just not know how to do it.
Any help greatly appreciated
Brad

Hi again Bill,
Something very strange has happened this morning. I was using Logic and thought 'I'll just plug in the TASCAM again to see if anything happens' and it just worked straight away. This is most peculiar as I didn't do or press anything to make it work. Yesterday when I was trying to get it to work, I closed the program and restarted the computer several times are making adjustmemnts but it just wasn't working at all. It seems a good night sleep has gievn it time to think things through lol.

Logic Pro X compatibility with mbox 2 mini and 2009 core duo macbook

I currently have Pro Tools LE 8.0.3 and an Mbox2 Mini, both of which amazingly still work on Mountain Lion 10.8.4. I'm interested in learning Logic and am trying to confirm compatitility with the Mbox2 Mini on a first generation core duo Aluminum Macbook (2.4 Ghz) running 4gb of RAM. The system requirements just say 10.8.4 or later with a 64 bit processor. The Macbook runs fine, and I primarily just record stereo piano tracks, so it's not like I'm going to have 16 tracks running on it. Anyone using an Mbox2 Mini, and any issues with the hardware?

It's not an external device's compatibility with LPX that matters...
It's your external hardware's compatibility with whatever OS X version you are using to run LPX in.... that is important.
Im guessing you upgraded OS X about the same time you switched to LPX?
So....
Make sure you have installed the drivers and software from this page....
http://www.apogeedigital.com/support/quartet#tab-id-1
Failing that, contact Apogee support for further assistance
http://www.apogeedigital.com/support/contact-support
Note: Why is it showing Duet and not Quartet briefly? Are you sure you installed the correct drivers or did you, at one time have a Duet?
Additional: You might want to try this.. though I doubt it will fix things... but this can cure all kinds of weird issues...
Delete both the main plist and the CS file...
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
Quit Logic Pro
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
Restart the computer.
Note: if you cannot find either of these files you didn't follow the instructions exactly as described

M-Audio F/wire 410 conflicts with F/wire Powercore in Logic Pro on iMac G5

Similar Messages

Maybe you are looking for