M audio fastrack pro

I got the new macbook 13" (late 2008) My tascam US 122 does not work on it. After emailing Tascam support in UK numerous times the problem has still not being fixed. I am therefor thinking of buying a new audio/midi interface. I was thinking of buying a M-audio fastrack pro interface. Has anybody out there got the same product and is it working fine on the new Mac books?

I do... works great. After you purchase the FTP you'll just have to update the unit that you can get at m-audio site.
Good luck.

Similar Messages

  • Hello, I just wanted to know when an update would be available for my mac mini server os x lion to resolve the issues regarding my m-audio fastrack pro usb audio interface (no midi messages recognized)

    Hello, I just wanted to know when an update would be available for my mac mini server os x lion to resolve the issues regarding my m-audio fastrack pro usb audio interface (no midi messages recognized)

    Have you reported your problems to Apple?
    BugReporter
    <http://bugreporter.apple.com>
    Free ADC (Apple Developer Connection) account needed for BugReporter.
    Anyone can get a free account at:
    <http://developer.apple.com/programs/register/>
    And/Or
    Mac OS X Feedback<http://www.apple.com/feedback/macosx.html>

  • FCP 6 with M-audio fastrack pro and sample rates

    hello, having a weird problem in FCP 6.02 under OS X 10.4.11 on a MacPro where if i record a voiceover through my m-audio fastrack at 48khz, which matches the sequence and project settings, it comes back at the wrong sample rate (plays back higher pitch), but if i record it at 44.1 it sounds right. any ideas on this?
    thanks in advance
    david

    Perhaps the M-Audio is still recording at 44.1, and FCP is set to convert the audio to 48k, but is unable to resample as it would with an analog source. I would try to access the control panel for the M-Audio box and see if you can get it to force its sample rate to 48k outside of FCP. If so, you can probably get FCP to record correctly at 48k. If not, you might be better off just letting it record in 44.1, and maybe batch exporting later to upconvert.
    Hope this helps -
    Max Average

  • Crashing - Logic Audio?  M-Audio FastTrack Pro?

    I just upgraded to Leopard. Using Logic Audio \ M-Audio Fastrack Pro. Just installed an eSATA PCI controller card for external drives.
    No trouble with Logic 8 \ Tiger \ M-Audio Fastrack Pro.
    Going to look for new drivers for Fastrack Pro.
    Mmm. Any ideas come to mind out there?
    All ears,
    Ben

    I think it was my M-Audio Fast Track Pro driver. Installed the latest one. Haven't had a crash in twenty minutes. That might have been the issue...

  • Input Level problem in GB with Fastrack Pro

    I have a wierd problem with Fastrack Pro. It's the same in GB and also Logic Express. I'm trying to record acoustic piano with a pair of condensor mic's on a MacBook Pro. I do get a weak signal in both programs if I set the gain knobs on Fastrack above 3/4 position. But there's no ability to adjust the signal up until I push the knobs to maximum. Then the signal clips. M-Audio let me exchange the unit for a new one, but the problem's the same. I took the setup to AppleCare and tried it on a MacBook there--same problem. AppleCare says there may be a problem with M-audio's driver, but they haven't found a fix yet. Has anybody else experienced this, or have any ideas on how to fix it?

    HT, thanks for your interest. I've tried with the pads both on and off, but to no effect. Another point of info: I used the Fastrack with my old Dell system, and it worked normally. It really seems to be internal to the MacBook, since the meter seems to work right in System Preferences but not in GB and LE. Can you think of anyway to calibrate the System Pref input to the app inputs? I know this is supposed to be automatic, but so far it's not working that way.

  • No Audio signal in Mainstage using M Audio Fastrack

    I'm not getting any signal in Mainstage from my M Audio Fastrack interface. It works fine with Logic Pro.
    Main stage recognises Fastrack and works fine with My Axiom 49 in keyboard mode but no joy when trying to use guitar?
    Anyone come across this problem?

    ontescr9 wrote:
    there's the signal from my guitar coming into the interface, but there's absolutely no movement on the level meter in GB
    did you select it:
    http://www.bulletsandbones.com/GB/GBFAQ.html#selectinterface
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Windows Media Audio 10 Pro Support on Ze

    I was wondering if Creative were planning to add support for Windows Media Audio 0 Pro on Zen based players with future firmware updates. I've been trying out the format a bit an its very good quality for size, a definite improvement on WMA 9.
    If you want to try ripping your music to this just download Windows Media Player and check it out.

    I was wondering if Creative were planning to add support for Windows Media Audio 0 Pro on Zen based players with future firmware updates. I've been trying out the format a bit an its very good quality for size, a definite improvement on WMA 9.
    If you want to try ripping your music to this just download Windows Media Player and check it out.

  • MIDI problems with M-Audio Keystation Pro 88

    I have an M-Audio Keystation Pro 88 MIDI keyboard controller I use with any number of DAW's. Lately the MIDI signals have been acting very strangely when I updated to 10.10. I have updated all the MIDI drivers in my library and since the M-Audio products need no drivers for a MAC, there are never updates in either firmware or MIDI drivers.
    Example;
    When running any of the DAW's I open Kontakt 5 and assign a VI. I right click the volume knob on the VI and tell it to "learn MIDI" and when I move a fader on the KeyStation it's inverted. No gain is now Hi and vice versa. Anyone else having this issue with MIDI in Yosemite?

    Thanks Jord,
    I have been trying this out. So i set up a new preset bank and say label it 'Live', in this preset bank i then set up my preset.
    Everytime the M-Audio is turned off and on will i have to load the new preset bank 'Live' using Enigma, or will it be stored in its memory

  • Problems with M-Audio Fasttrack Pro and Garageband after 10.5.2

    Hi all,
    I use GarageBand daily with my M-Audio FastTrack Pro and have had absolutely no problems until I installed the 10.5.2 update.
    Suddenly the Audio randomly cuts out when I'm recording, monitoring or playing back - also my recordings appear to skip and jump too. Usually I can rectify it by power cycling the Fasttrack but the problem re-occurs after about 30 seconds of recording.
    I have double checked the I am using M-Audio's latest drivers and have repaired permissions and the disk. I was wondering if anyone else had had any problems with this?
    All help would be appreciated, looks like I'm going back to 10.5.1 though.

    Hi !
    Still no answer from M-Audio but it seems that they are not in cause.
    I read on several topics of Apple's Forums some similar problems with other audio devices and also with some USBhubs.
    I ran some little tests and for my case, using the other USB port of the MacBook seems to resolve the problem (but that's not a permanent solution for my point of view).
    Using a selft-powered USBhub works also, even on the port that makes it crash without hub.
    As I studied a little bit of electronics, it looks really like a problem of power supply through USB to me. It could be some kind of micro-cuts (or micro-undervoltage) that are sufficient to cut the audio stream and freeze a bit the system but not enough for MacOSX to switch significantly to the internal audio.
    But two questions still remain :
    Why one USB port of the MacBook and not the other one ?
    Why since 10.5.2 ?
    Steve, if you hear me ;o)
    'Hope they will react quickly !

  • Please help me with Audio Hijack Pro!!!!

    Guys, I am really trying to get my podcast back up and running, but I ran into a weird problem with Audio Hijack not too long ago. I have gotten this to work many times before, so this is nothing new. When I use AHP to hijack my microphones, and then use Garageband to record, after 10 min, I get static on one of my mics. Now, I have purchased this product, so it is totally legit, and I know that the trial gives you static after 10 min, but I have my code and the program took it fine. I have contacted AHP, but they basically had me delete a pref file and then reinstall it. It did not work. Can you think of any other ideas that I can try??? I really want to get this back up and running and it takes AHP a long time to get back to me. PLEASE HELP!
    Thank you!

    I forgot to mention the reason I am using Audio Hijack pro is because i am using 2 usb mics.

  • Ways to record radio broadcasts using Audio Hijack Pro

    If I download Audio Hijack Pro what is the simplest and most efficient way to download radio broadcasts ?
    I have experimented using Garageband and my radio tuner with an audio cable connected to the 'audio-in' port without success.

    I'm late to this discussion because I've had no problems recording my weekly 2-hour jazz show by inputting my Onkyo tune to my 2013 iMac vs. USB (Apple removed the audio-in jack--darn it).  I recorded them in Sound Studio (which unlike Toast has easily editable audio waves--and for digitizing LPs, I found I could be more accurate and achieve faster results that with Spin Doctor, which is bundled with Toast). I had no trouble.  That is, until now.  My recordings are suddenly all static.  I can hear my voice in the background but the recording is unusable for all practical purposes.
    I can only infer that the problem may stem from my Onkyo receiver transmitting a regular FM signal (it's not an HD receiver).  The station that I broadcast from is HD (like many other public radio stations), so the main channel (#1) along with #2 and #3 are transmitting a high def signal, which will not have static (it's all or nothing, the signal is clear or it's non-existent).
    Therefore, it appears I need a program like AHP to record the program direct from our station's internet site.  (I'm not clear if internet radio and HD radio are the same thing.  HD radio, of course, proved a bust, but internet audio seems no longer to provoke the little bit of complaint.  (10 years ago it was like 2 dixiecups communicating with a string.  A joke when compared to the best vinyl.  But now the AIFF and Apple Lossless files appear to meet the approval of audiophiles.)
    I'm wondering if AHP is still the program of choice for recording sounds from my internet radio station (My Roxio Toast claims to have the capability, but it's proven highly buggy and undependable.)  Or would I be better advised to look for an external HD radio/tuner with audio out to go to my computer.  (Possibly a tall order these days with no one making HD radios.)

  • Audio Hijack Pro--What Did I Do?

    Audio Hijack Pro used to work very well, until I used it to enhance the sound on my MacBook Pro (latest Lion OSX). One day, it started distoring everything played through it. Now, when I want to just get the audio off a video of guitar and banjo lessons to play on my iPod, the recordings are terribly distorted. Recordings and playback from all sources through Audio Hijack Pro--Itunes, Safari, Quicktime, etc.--are severely distorted with high frequency noise and reverb. It's as if the Effects are on, but they are not.
    I am not very familiar with audio settings, and have Soundflower 2ch as the input device (used with IShowU). I tried removing and re-installing it twice. I changed to Default Input, etc., etc.
    I have no idea why this program was working and is now totally useless. I'm asking for help. Somewhere, somehow, I changed a setting or settings, and now I can't make it work. There have been a couple of Apple software updates that may have something to do with this...
    Any advice I can get will be greatly appreciated.
    Christine

    Yes. I own it. I solved the problem. I had a trial version of another sound enhancement program called WOW. I removed it and the problem is solved. It was obviously running in the background even though I thought I had uninstalled it.
    All is well now.
    Thanks!

  • I need HELP connecting a M-Audio FastTrack Pro USB with a Behringer 1202!!!

    i need some assistance wireing up my personal studio. Im running on a Mac Pro Tower Logic 8. I have a M-Audio FastTrack Pro USB interface and want to hook up a Behringer 1202fx mixer. How exactly do i do the wiring for this???what settings do i need to change in system preferences or in Logic.????? PLEASE HELP ME!!!!!

    It depends what you want to do, and what gear you are hooking up and what you want to do with it.
    How you hook it up really depends on your needs, which you don't specify.

  • M-Audio FastTrack Pro output works, input fails.

    Greeting, Archers
      I'm trying to get microphone input for the M-Audio FastTrack Pro working.
      So far, I have output working.. but with input.. no dice.
      I would rather not have to install windows or Ubuntu Studio.. but that is my last resort :S
    KTHXBYE
    Last edited by StrongDrink (2011-09-10 23:36:17)

    Yes, I beleive I am. I'm using Gnome-Shell at the moment, and I think it comes with pulseaudio by default.

  • Why is Audio Hijack Pro only recording 31m of a 2 hour program?

    I'm sure many of you are familiar with Audio Hijack Pro. I just bought it and can't figure out why it's only recording 31 minutes of a 2 hour stream. I read about various ways to route the audio back into Logic 8 but Audio Hijack Pro seems really easy.

    You know, it's funny you mention the bit about registering it...
    When I followed someone else's suggestion to check the schedule tab (which was turned off), the mere fact of me clicking on that tab (which I hadn't done previously) opened up a series of 3 installs (Soundflower, etc.), which was unexpected, yet promising somehow. It asked me to log off and restart. So that could be totally key. I'll see how it goes today. No worries about the registration thing. Btw, thanks to you and all the other people who have responded. The Rogue Amoeba people are helpful, but it takes 1-2 days to get a response, so it's been like watching paint dry. Cheers to you all.

Maybe you are looking for