M-Audio FireWire 1814 Interface & a Mac Book Pro...

How do I get my M-Audio FireWire 1814 Interface working on my Mac Book Pro?  I keep getting a message that says the "security" settings on my computer will not allow this defice to be used.

I did think of that after I had posted. so now when working on video if I have the dv device with me Ill use the haedphone jack if not Im assuming I do what I did?
what I mean is if I dont have the device with me its just me and my mac book pro and external drive and Im viewing video on the mac on its screen
thanks for pointing this out other wise I would have been posting again when I was trying to get it to tape!!!

Similar Messages

  • Audio out on HDMI from mac book pro?

    Audio out on HDMI from mac book pro?

    Yes, a retina MBP will support audio via HDMI.
    Ciao.

  • Hi, Ive been trying to hook up my M-Audio interface to my Mac Book Pro 15 laptop and it doesnt have the same size firewire port is there some kind of adapter i can buy?

    Hi, Ive been trying to hook up my M-Audio interface to my Mac Book Pro 15 laptop and it doesnt have the same size firewire port is there some kind of adapter i can buy?

    Just Google for a Firewire 400 to Firewire 800 cable, you are sure that this is what you have I hope?

  • I am getting no signal to my dj mixer using m-audio firewire audiophile sound card connected to my mac book pro using Traktor Dj software can anyone help?

    I am getting no signal to my dj mixer using m-audio firewire audiophile sound card connected to my mac book pro using Traktor Dj software can anyone help?
    The firewire port reads the dj software and I can hear music playing through the sound card when I plug my headphones into it but there is no signal to the hardware (my dj mixer).
    I have reset the firewire by turning off my mac book pro for a few hours and can see the sound card device in the fire wire section after clicking on the apple icon on the top left corner of my mac.
    My dj mixer works on another mac computer with the same soundcard and different firewire cable.
    Hope someone can help
    Thanks
    Wayne

    kmiddlet88,
    yes, it could be due to nearly anything listed in your kernel extensions, startup items, launch daemons, launch agents, or user items above. Please check all of your installed third-party software to make sure that the versions which are installed on your MacBook Pro are compatible with Mavericks; uninstall every software package which isn’t Mavericks-compatible. After you’ve done that, boot into Safe mode, and see if you still get the beach ball of doom there. If it doesn’t appear there, restart normally and see if it appears then.

  • M-Audio Firewire 1814 troubles

    Hi,
    Although I am not new to Logic, I just recently (5 months ago) switched to a Mac and Logic Pro 7.2.
    I use an M-Audio FireWire 1814 as my interface adn up till now never had any real problems.
    But since yesterday, it seems that my interface is having some troubles and I would like to know if there are any other users with similar experiences. This is what happens.
    Initially, everything works perfectly, but after, say, 30 minutes, the audio starts to stutter (as if there is a delay in the path). A couple of minutes later the audio starts to drop out completely and some high pitched noises can be heard. A little while later the interface seems to die completely, resulting in a 'Device Removal' message.
    I have no clou what might have caused this phenomenon. I certainly did not do any hot plugging. But to be sure I switched to another port, just to have the same problems.
    A complete driver removal and re-install did not help either.
    I can say that, the first time this happened, my Mac completely hung up: some kernel-task was using 105% and everything else started to work really slowly...
    So, any thoughts? Is this a hardware problem and should I take the FW1814 back to the store? Or are there any other steps to be taken to make shure otherwise is indeed in good condition (eg bad drivers)? I know these are questions that are more inspired by my Winders history, but nevertheless...
    Please help. Many thanks.
    Bert

    Any chance you are using other Firewire devices, such as a Firewire drive? What type of Mac are you running Logic on?
    The M-Audio 1814 does not play well with other Firewire devices and M-Audio will give you the run around on this all day long. This is especially a problem on portable macs because they only have one Firewire bus and this can spell * crash * (and often does with Firewire disk drives) if you try to use the M-Audio 1814 with other Firewirewire devices.

  • WD MyBook Firewire 800 and M-Audio FireWire 1814 conflict

    I have a big problem with an external HD Western Digital MyBook firewire 800 and a M-Audio firewire 1814.
    When I turn on the external HD (connected via firewire 800) the sound card stops to play.
    If I don't use the drive everything works, but if I use the external HD the sound stops again.
    If I connect the external HD via firewire 400 or usb2 the soundcard works perfectly ...
    I think there is a conflict in some driver but I do not have any soundcard (firewire) or any other external drive (Firewire800) to check WHERE is the problem.
    I have the same problem in both my Macs (iMac 24 Aluminium and MacBook Pro 17")
    Does anybody can help me? Am I the only one with this problem?
    Do I have to complain with Western Digital, M-Audio or Apple Inc.?
    Thank you for your help!
    Carlo

    Thank you Chris, I just wonder why Bee Jay can use the HD FW800 with the M-Audio Firewire interface without problems.
    I use the ext HD for backup too, but sometimes I need to find something in my backups and I have to turn off the audio interface and copy the files on my internal HD ... then turn off the drive again and turn on the M-Audio ... it's very annoying.
    In some forum I read that the problem can be the firewire chipset, but my iMac has the Lucent and the MacBook Pro has the TI (reccomended by M-Audio) ... same problem on both machines.
    I did some test:
    1) If I use the FW800 external HD and the FW400 with iMovie and my Video Camcorder I have no problem at all. I tried to use the HD at maximum (during a time machine backup I was copying other files and saving the HDV files in the same external HD) and everything works perfectly without loosing a single frame.
    2) If I connect the HDV camcorder to the M-Audio interface I cannot even start the capture ... I have to turn off the external FW800 HD.
    It looks that the problem is definitely in the M-Audio Firewire driver but unfortunatley the M-Audio e-mail support is only for US customers ... and I'm Italian.
    Is there any US customer that has this problem and can insist with the M-Audio support?
    Maybe they can solve it in the next release ...
    Thank you in advance.

  • How can I do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder which does not have firewire out/input? it comes only with a component video output, USB, HDMI and composite RCA output?

    I need to do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder (http://store.sony.co...ber=HDRAX2000/H) ..this camcorder model does not have firewire out/input ..it comes only with a component video output, USB, HDMI and composite A/V video output..
    I wonder how can I plug this camcorder to the firewire port of my laptop? Browsing on internet I found that Grass Valley Company produces this converter http://www.amazon.co...=A17MC6HOH9AVE6 ..but I am not sure -not even after checking the amazon reviews- if this device will send the video signal through firewire to my laptop, in order to live streaming properly? ..anyone in this forum could help me please?
    Thanx

    I can't broadcast with the built in iSight webcam... how would I zoom in or zoom out? or how would I pan? I've seem people doing it walking with their laptops but that's not an option for me... there's nothing wrong with my USB ports but that's neither an option to stream video because as far as I know through USB you can't connect video in apple operating systems ..you can for sure plug any video cam or photo camera through usb but as a drive to transfer data not as a live video camera...  is by firewire an old interface developed by apple that you can connect all sorts of cameras to apple computers... unfortunately my new sony HDR-AX2000 camcorder doesn't have firewire output...
    thanx

  • How can I do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder ..that doesn't have firewire out/input?

    I need to do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder (http://store.sony.co...ber=HDRAX2000/H) ..this camcorder model does not have firewire out/input ..it comes only with a component video output, USB, HDMI and composite A/V video output..
    I wonder how can I plug this camcorder to the firewire port of my laptop? Browsing on internet I found that Grass Valley Company produces this converter http://www.amazon.co...=A17MC6HOH9AVE6 ..but I am not sure -not even after checking the amazon reviews- if this device will send the video signal through firewire to my laptop, in order to live streaming properly? ..anyone in this forum could help me please?
    Thanx

    I can't broadcast with the built in iSight webcam... how would I zoom in or zoom out? or how would I pan? I've seem people doing it walking with their laptops but that's not an option for me... there's nothing wrong with my USB ports but that's neither an option to stream video because as far as I know through USB you can't connect video in apple operating systems ..you can for sure plug any video cam or photo camera through usb but as a drive to transfer data not as a live video camera...  is by firewire an old interface developed by apple that you can connect all sorts of cameras to apple computers... unfortunately my new sony HDR-AX2000 camcorder doesn't have firewire output...
    thanx

  • My audio stops outputting after a few songs in a playlist - itunes says its still playing, stopping and starting track recommences audio output.  Mac book Pro Lion 16gb ram

    My audio stops outputting after a few songs in a playlist - itunes says its still playing, stopping and starting track recommences audio output.  Mac book Pro Lion 16gb ram.  Can be any song, any time, same song will play if I select it again.  Bit of a bummer itunes is the main thing I use (macbook pro jukebox).

    Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
    Best of luck
    Terry

  • Soundproblem: Mac Book Pro with M-Audio Fast Track pro.

    Powerbook: Mac Book pro 10.6.8., 2,66 Ghz, Intel Core i7, 4GB
    Interface: M-Audio: Fast track Pro
    Version 1.8.1.
    I have a problem with the M-Audio Interface with the Mac-Pro via USB. It sounds as if the speaker is broken. The Powerbook works normal - via intern soundcard no problem. The Interface, too. I checked it with my Mac Pro (Mac Pro, 10.5.8, 2x 2,8 GHz Quad-Core Intel, 8GB Ram,) no problem!
    Ger: Seit neuestem Krächzt und rauscht der Sound über das M-Audio Interface, als wären die Speaker durchgeknallt. Lief sonst immer ohne Probleme. Weiss nicht ob es an 10.6.8 oder dem M-Audio liegt? Der Rechner läuft sonst einwandfrei - interne Audio läuft tadellos. Das Interface genauso - auch meinem festen Rechner Mac Pro, 10.5.8, 2x 2,8 GHz Quad-Core Intel, 8GB Ram,

    No problem, you need to select an audio track and select input monitoring if you want to hear something and of course recording (the first two square buttons in the track, marked I and R) and plug your headphones into the M-Audio otherwise you won't hear anything (as mentioned above) cause that is what the m-audio is for, it replaces your computer's sound card. And unless you set up some aggregate device your computer's sound card will not work...and (nearly forgot) if you plug in your guitar in one channel you need to select a mono audio track to record otherwise it will be only on one side.

  • I need to connect my old Mac book pro to the new one to transfer files.  The old one doesn't have Thunderbolt 2 and the new one doesn't have Firewire 800.  Will the Thunderbolt to Firewire adapter or Firewire to Thunderbolt adapter work?

    I want to transfer data from my old Mac book pro to my new one using migrate.  The old computer doesn't have Thunderbolt 2 and the new one doesn't have Firewire 800.  Does the Thunderbolt to Firewire or the Firewire to Thunderbolt adapter work to connect them and transfer data?
    Thank you!

    Yes, use a Firewire cable and the FW to Tbolt adaptor.

  • I have s mac book pro--I would like very much to have the output to the DVI cable --my audio(sound) wilkl nit default to DVI output  --How can this be changed

    I have a mac book pro--I would like very much to have the output to the DVI cable --my audio(sound) wilkl nit default to DVI output  --How can this be changed, so it does not default to interabnl speaker
    Is there a way to force the system to change to DVI output?????
    thanks a lot

    Hi there,
    You may find the troubleshooting steps in the article below helpful.
    Troubleshooting issues with no audio from built-in speakers on Macs
    http://support.apple.com/kb/ts1574
    -Griff W.

  • I have a mac book pro and i have connected my panasonic mini dv video camera via firewire 9 to 4 pin connector but imovie doesnt recognize. please help.

    I have a mac book pro and i have connected my panasonic mini dv video camera via firewire 9 to 4 pin connector but imovie doesnt recognize. please help.

    Hello twrate,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iMovie '11: If iMovie doesn’t recognize your camcorder
    http://support.apple.com/kb/PH2146
    Best of luck,
    Mario

  • AUDIO SAMPLES FROM IOMEGA 100 ZIP DRIVE TO MAC BOOK PRO / LOGIC?

    Posted: Fri, Feb 15 2013, 1:27pm    Post subject: AUDIO SAMPLES FROM ZIP 100 TO MACBOOK PRO / LOGIC?
    HI THERE
    I HAVE LOADS OF OLD AUDIO SAMPLES ON ZIP DISKS ( ZIP 100 using akai cd3000 sampler ) THAT I WOULD LIKE TO TRANSFER TO MY MAC BOOK PRO FOR LOGIC EX24.
    IS IT A SIMPLE CASE OF A 'SCSI TO USB LEAD' , WILL MY MAC BOOK PICK IT UP FROM THERE OR DO I NEED SOFTWARE OR DRIVERS FOR MY MAC TO BE ABLE TO SEE THEM?
    IS IT EVEN POSSIBLE AT ALL?
    THANKS

    Hi guys
    Sorry for the delay in coming back. I bought a zip drive pretty cheaply then and it has only just turned up. However when I put my old ZIP disks in, it seems like the ZIP drive reads them at least but the MACBOOK comes up with the following message...
    'The disk you inserted was not readable by this computer'
    Does this pretty much mean a no go then?  Or can I put the samples from my AKAI sampler back through the old ZIP drive,  reformat some new disks in a certain way on that drive so that my MAC can read them?
    All its for really is mainly to take old tracks that used these samples and getting them set up in my mac.  Also there was some good bits and pieces there anyway and would like to keep using those samples for newer projects. I could of coourse resample them from the AKAI straight to the MAC but would be not as practical and would take alot longer. The 13'' macbook pros input is not digital, only its output.
    thanks

  • Audio over HFMI on a 2009 Mac Book Pro - which cable?

    Got a Mac Book Pro (2009), want to connect to my Panasonic tx l32d25b with tech link wires - visual works but no audio - does anybody how to make the audio work? Rich

    You'll need an adapter that combines video from the mini-Displayport and audio from the headphone port or a USB port into a single HDMI cable. Here are two:
    http://kanexlive.com/products/iAdapt51.html
    http://kanexlive.com/products/iAdapt20.html
    The first carries 5.1-channel surround sound from the headphone port; the second carries ordinary 2-channel stereo from a USB port.

Maybe you are looking for

  • ITunes doesn't launch automatically when iPhone is connected

    This used to work fine...I'd attached my iPhone 3GS to my MacBook via USB, iTunes would automatically launch and begin synching my iPhone. Then (I'm not exactly sure what happened...perhaps it was an update, or a spate of time when I was travelling a

  • Buttons not working on published SWF Captivate 2 project

    I have published a daisychained Captivate 2 project in three pieces, all published as SWF. The first piece plays fine, but a user has to push a button to choose to either go to the second piece OR the third piece. The button was designed so that when

  • Edit in Photoshop shows a black photoshop window

    I have the latest version of Lightroom and Photoshop. Whenever I right click to open the image in photoshop, photoshop window opens with a black screen. It don't open the image.

  • Command window and Runtime.getRuntime()

    Hi, I am trying to execute Runtime.getRuntime().exec() command on click of a button. It works fine, but the problem is that i get a command window when the command is executed. Is there any way to make the command window not to appear?

  • E-catt on Web-Dynpro Java application

    Hi All, Is there any way to use e-catt on Web-Dynpro Java application? If any one has use it please guide me the steps? Regards