M Audio MIDI Keyboard Not Working with Logic 9

I've M Audio MIDI Keyboard 49, it's working fine with GarageBand but when I go Logic pro and try to record midi it record notes but I can't able to hear that notes and even I play record notes it not playing either. some can help me and can explain me where I'm going wrong?

Ankeet wrote:
explain me where I'm going wrong?
You have forgotten to look in the Logic manual. Keyword: Software Instrument.
http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=9%26sec tion=1%26hash=appleref:doc:uid:TempBookID-ReplacedWhenAssociatingWithMessierRevision-43984TRA_SC1107-SW7

Similar Messages

MIDI Keyboard Not Working With Logic Pro X

I have a MIDI keyboard that I've had for a while. I've upgraded to Logic Pro X, but the keyboard isn't working. I can't hear sound when I play it, nor when I record and try to play it back to myself. What's more frustrating is that I used this keyboard all of the time with Garageband, and there were no issues . It's a simple M-Audio DigiCore MIDI keyboard, and I've updated everything, but I just can't get it to play. I am new to this software, so I'm having a really difficult time navigating this as well, so any help is welcome.

Ok here's what happened, controller was working fine everything set up, then it quit. called tech help at sweetwater, the motu was not seen as a midi interface anymore...went to motus web site, downloaded update for 10.4.4 THAT WAS IT! now it works!
Take note....thanks for your replies!

MIDI keyboard stops working with Logic Pro 9

Hi so I have an M-Audio keystation 49es for Logic pro 9 for a few months now and never had problems. now when im in logic and i press a few keys on the keyboard, i hear sound coming out for about 5 seconds and then all sound is gone or the note sustains and all signal from the midi keyboard is lost. And so i turn off the keyboard and turn it back on and the same thing happens over and over. I tried restarting the mac, restarting logic, switching usb ports, trying different projects, and i have the same problem. Any help??!

Have you tried this button?

USB MIDI keyboard not working

Hi everyone,
I recently upgraded to a Macbook (White) and I haven't been able to get my MIDI keyboard to work with it. It's a Novation Remote 25 LE, and all of the documentation for it claims it is fully USB compliant and does not need any drivers to function. Well, that doesn't seem to be the case. I used the USB drivers for OS X that Novation has on their site to no avail.
The catch is, it worked flawlessly on my old 12" Powerbook without drivers. Comparing the two configurations, I notice that using the Audio MIDI Setup program under utilities the Remote LE shows up, but has no ports assigned to it, nor can I add any, while it has "Remote LE" listed under port on my old Powerbook. Anyone have an idea how I can get this up and running? Thanks in advance!

There's another user with a very similar issue to yours. It makes me think that Leopard is the problem here--unless you had Leopard installed on your PowerBook?
Perhaps keeping an eye on this thread will help:
http://discussions.apple.com/thread.jspa?threadID=2031411&start=0&tstart=0
~Lyssa

Looking for a way to get my Product ID and Vendor ID so I can enable my Radium 49 USB MIDI keyboard to work with Labview 7

Looking for the Product ID and Vendor ID for my Radium 49 USB MIDI keyboard to work with Labview 7
Is there a tool to find out the Vendor ID and Product ID for a USB device?
Example: of what I'm looking for
The Product ID for National Instruments DAQPad-6020E is 0x12C0. The
USB vendor ID is 0x3923. This is a 16-bit hexadecimal number(1093)
(that is decimal 4243).
Thanks for all the fast responses this newsgroup RULES!!!!!!!!!!!!

http://digital.ni.com/public.nsf/allkb/335A90747734097886257070006415B9
How To Find The Vendor and Product ID for USB Devices?
Primary Software: Driver Software>>NI-VISA
Primary Software Version: 3.3.1
Primary Software Fixed Version: N/A
Secondary Software: N/A
Problem:
I want to make an NI-VISA driver that requires the vendor and product ID?
Solution:
There is a utility called USBView,
free from Windows, attached below, which you can use to view what is
connected to your computer's USB ports. It is necessary to load this
program and connect the USB device in development. Upon selecting the
device in USBView, one can then look on the right side of the
application window to obtain the Product ID and Vendor ID. This will
allow you to enter in the correct IDs when creating a driver .inf file
when using the VISA Driver Development Wizard. For more information
about how to use the VISA Driver Development Wizard see the related
links below.
Note: It is necessary to keep the hexadecimal
(0x####) format. Do not remove the "0x" hexadecimal format preceding
the ID number.

Why is Emoji Keyboard not working with iOS7....??? Is there any setting which I am missing? Can anyone help

Why is Emoji Keyboard not working with iOS7....??? Is there any setting which I am missing? Can anyone help

Yes. you should keep your media in iTunes, and indeed you should also keep a backup of your library as well. if you have the device set up for manual management then the content would remain on it when deleted from the library, but you would have no way to restore the device if there was a problem.
See also: Getting iTunes & Windows Media Player to play nicely
tt2

Hooking up midi keyboard to work in Logic

I am using Logic Pro and am on a MacBook Pro (OS X 10.8.3).
I'm in the process of buying an Evolution MK-149 midi keyboard. It will come with a midi cable and 9V transformer, but what will I need to link this up to my mac to get it working with Logic?
I know that there are midi to USB cables and I assumed this is what I would need, but have been trying to read around and am now not sure whether or not I will need to buy a midi interface too.
If anyone could shed some light on this for me it'd be greatly appreciated! Bearing in mind I'm a bit of a novice, layman's terms would be useful just to help me along!
Thanks

Great - thank you.
Would you think something like the link below is sufficient, even though it's a little basic?
http://www.thomann.de/gb/thomann_midi_usb_1x1.htm?sid=731f0edca52cf128c99e5ec571 aaa853

Melodyne 2.6 not working with Logic 7.1.1

Hi,
those of you who are using Melodyne with Logic and Tiger, does it
work with the Bridge mode ?
I've been trying it now with several different takes and all I get
out of it is sort of a hummingbird like a whistle
or pigs been strangled..take your pick..is it just me ??
It's the 2.6.0.6 Bridge version with Logic 7.1.1 and Tiger 10.4.2.
Thanks

Wll first answering my own question I may have found out the culprit.
After launching my mLan auto connector and looking at MIDI/Audio set up I found that even Logic was working allright with my 01X though it still insisted I was using Internal audio instead of mLan. After changing that, the first and so far only test, I was able to use Melodyne OK.
Otherwise I repeat what others already said here that although Logic lists Melodyne 2.6.0.6 as incompatible it will work.
I guess now that v3 is due out in about a month we'll never see the 2.6. updated to fully work with Logic 7.

Why are none of my midi controllers not working with my new MacBook Pro?

I am running OS X 10.7.3
None of my M-Audio midi controllers are syncing with my new MacBook Pro.
They are all class-compliant and willl work on Mac OS X without the need of a driver is what M--Audio has posted on there website for all of my controllers.
I am using the following midi controllers:
Keystation 49e
Axiom 25
Trigger Finger
I purchased my new laptop all most 2 months ago and have not been able to start making music on it since. Lots of issues transitioning to Lion. I am still using my old macbook to make music. Any suggestions?
Thanks!

I had the same problem with my apps and your solution worked perfectly! You made my day (:

Behringer UCA200 not working with Logic

I recently received a Behringer 1222FX mixing board for christmas. It came with a UCA200 which is a little RCA-USB product. I want to use this board with Logic 9 but i can't seem to get it to work. I added a track and selected Input 1 but when i hit record the only sound that was recorded was from the internal computer speakers.
I have already tried the board with Garageband and it worked fine. I was wondering if anyone would steer me in the right direction and help me get this to work with Logic.
Please note that this question maybe simple to answer as I am new to Logic.
Thank You

Chance has it I just tested the UCA-200, and its' quality is very clearly inferior to my ancient Macs' built in 16 bits audio. So don't use it, use the Macs' own built in audio instead. Chances are that the BIA of your Mac is 24 bits (which Mac do you have?), whereas the UCA200 is only 16 bits. That thing is only an improvement if you have an old PC with 8-bits audio. Sorry Uli (Behringer).
regards, Erik.

M-audio midi keyboard stopped working

Used the Radium 61 successfully for about a year with Logic Pro 7. Had to reinstall the system software to fix another problem. After that the Radium was USB-ed in and no longer recognized by Audio Midi Setup, no signal in Logic or Garage band. Reinstalled the latest driver (3.2), repaired disk permissions. Nothing. Please if anyone has had this problem illuminate us !! Thanks heaps, Mara

Hi brazilbeat,
You might try updating your system software to 10.4.11. Click the Apple logo top left of your Desktop then click Software Update. Let the installer do the work for you... it will scan your drive to determine which updates you might need. And as always with any major system updates, back up your drive first just in case, after the updates run Disk Utility to Repair Disk Permissions.
Perhaps that will help...
Carolyn

Midi keyboard key A2 not working with Logic Pro 8

Hello
I was using an m-audio keyrig 49 for a good 3 months, when all of a sudden the A2 key stopped working properly. The transport bar in logic shows that midi data is being received when I press A2, however there is no velocity value. The key only makes a sound when I'm going from another key to it, and even when that happens there is a sustain effect on the note, which aren't on any other keys.
I have tested this on midi keyboards from m-audio, novation, and edirol... keyboards that require drivers and keyboards that don't require drivers.
Any ideas?

Try redefining the key commands. Sometimes they can be a little flaky when importing earlier key commands. Redefining them might "unstick" them...

Send & Return with Fireface 800 not working with Logic 8

Hello all.
I'm having a bear of a time setting up an FX loop from Logic to a FireFace 800. I suspect the problem is in Totalmix, but I can't seem to configure that at all.
Trying to route Track #1, through the FF and into Helicon VoicePro, then back to Logic's Track #4.
Here's what I'm doing:
- In Logic, Track #1, in Mixer window, setting Send to Bus #2.
- Bus #2 is set to Outs 3-4.
- Fireface outs 3&4 go to the Helicon
- Helicon outs go to Fireface input 7&8
- In Logic, track #4 is set to Input 7&8, Out 1-2.
I'm NOT using the I/O plugin, just the normal I/O selectors.
I get no signal to the Helicon with the above setup. However, if I change the Fireface cabling so the outs are 1&2, it goes through the Helicon just fine (the only problem is I get an echo-loop as the signal is feeding through over and over again). So, the Helicon works, the problem is at the Fireface, and I suspect it's because I can't get Total mix to route. The Fireface manual is worthless for this, I've followed the one paragraph of advice and it doesn't work.
Does anyone know of another way to route the signal? Or any tutorial for Totalmix?
All I want to do is send, add FX, then return to a new track.

R u recording midi input into the track? (ez drummer takes midi info and feeds it into the plug-in (drum samples) for output. of course, you can route the output from ez drummer to an audio track to record the audio output. But working in midi allows you to edit your midi files, change drum sounds, etc.

SB X-Fi XtremeGamer on Vista, trying to get Virtual Midi Keyboard to work with Reaso

I've got a Vista 32 quad core computer with the Sound Blaster X-Fi XtremeGamer sound card. I'm trying out Reason 4, an advanced music production program that needs a midi keyboard. I downloaded Maple Midi and Virtual Midi Keyboard so I can try it out without buying a real midi keyboard.
The Virtual Midi Keyboard makes no sound when the Maple Midi ports are selected which are the only ones that Reason 4 can see, and when selected Reason acknowledges when I press a note on the keyboard though no sound. the other Midi ports 2-SB X-Fi Synth A, B etc make sound but Reason 4 can't see them.
And then using Soundfont Bank Manager I see a virtual keyboard and it shows the 4 Maple Midi ports and makes noise with any of them selected but Reason 4 can't seem to see or select this virtual keyboard.
Any ideas? I'm new to music and audio editing, so it may be something obvious that I've overlooked.

Yes, its showing up in the device manager and states its working properly with no errors, I tried uninstalling/reinstalling it in 3 of my PCI slots.
The first time I installed it, I uninstalled my onboard sound like the intructions stated before I installed the new one, why I had to reformat and start from scratch so I can manually disable it in the BIOS because all that is on my partition.
The only thing that comes up with the card to pick from is my MIDI player, but nothing else, but even with that I get no sound because I cant raise the volume on any volume control.

USB Interface Not Working With Logic Pro 9

Hello,
I've had a Tascam US-1641 for several years now with absolutely zero issues on my old PC. Ever since I upgraded to Mac (early 2011 17 inch Macbook Pro running Snow Leopard) I've had nothing but problems with the US-1641. No matter how many times I uninstall-reinstall the drivers and what USB port I plug it into, whenever I turn on the device and it's connected to my Macbook, it crashes my operating system and it freezes everything I was doing. Logic Pro doesn't load and when it sometimes does (10 minutes later), it immediately crashes when I click anything.
I've tried several tips to fix it and nothing worked. The most popular choice was select the default input/output in Logic to the system audio, then quit Logic, turn on the interface, then restart Logic. No such luck. I have to reboot my machine at least 5 times, uninstall/reinstall the driver and hope it works to use the interface. I thought it was the operating system, so I upgraded to Mountain Lion and installed the new driver for Mountain Lion, after of course deleting the other drivers and removing all previous data, and it is still giving me the same problems.
I don't have the money to afford a replacement model or a different interface from a different company, so I'm hoping you guys can help me figure out what exactly it is that's causing the interface to freeze my operating system and crashing my Mac whenever I try to use it. I am getting extremely frustrated at this and as much as I love OSX and Logic, what good is this piece of software if I can't use it? I need help.
Thank you.

The problem lies with Tascam and their inability to write stable drivers for OS X... and isn't anything to do with Logic Pro ..
As you know, you are not the only person to have had this issue and the reality is, while the 1641 might work fine with Windows, when it comes to OS X Macs.. it's an entirely different story... depending on the version of OS XS you are running.
The one tip I have read, that seemed to fix it for most people.. (Though not all) is as follows;
(Thanks to Paulypaulpaul for this)
-uninstall your tascam driver 2.10
-restart
-install driver 1.03
-restart
-plug in your tascam
-goto where you download your drivers (http://tascam.com/product/us-1641/downloads/), scroll down to the bottom where it says firmware, Download the firmware 1.02 (3rd from top under firmware), install it. your control panal should now read 1.03 for your drivers and 1.02 for your firmware.
-install drivers 2.10
-restart
Follow each of the steps exactly.. including all restarts when indicated..
...and good luck...

M Audio MIDI Keyboard Not Working with Logic 9

Similar Messages

Maybe you are looking for