M-audio midi keyboard stopped working

Used the Radium 61 successfully for about a year with Logic Pro 7. Had to reinstall the system software to fix another problem. After that the Radium was USB-ed in and no longer recognized by Audio Midi Setup, no signal in Logic or Garage band. Reinstalled the latest driver (3.2), repaired disk permissions. Nothing. Please if anyone has had this problem illuminate us !! Thanks heaps, Mara

Hi brazilbeat,
You might try updating your system software to 10.4.11. Click the Apple logo top left of your Desktop then click Software Update. Let the installer do the work for you... it will scan your drive to determine which updates you might need. And as always with any major system updates, back up your drive first just in case, after the updates run Disk Utility to Repair Disk Permissions.
Perhaps that will help...
Carolyn

Similar Messages

  • M Audio MIDI Keyboard Not Working with Logic 9

    I've M Audio MIDI Keyboard 49, it's working fine with GarageBand but when I go Logic pro and try to record midi it record notes but I can't able to hear that notes and even I play record notes it not playing either. some can help me and can explain me where I'm going wrong?

    Ankeet wrote:
    explain me where I'm going wrong?
    You have forgotten to look in the Logic manual. Keyword: Software Instrument.
    http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=9%26sec tion=1%26hash=appleref:doc:uid:TempBookID-ReplacedWhenAssociatingWithMessierRevision-43984TRA_SC1107-SW7

  • MIDI keyboard stops working with Logic Pro 9

    Hi so I have an M-Audio keystation 49es for Logic pro 9 for a few months now and never had problems. now when im in logic and i press a few keys on the keyboard, i hear sound coming out for about 5 seconds and then all sound is gone or the note sustains and all signal from the midi keyboard is lost. And so i turn off the keyboard and turn it back on and the same thing happens over and over. I tried restarting the mac, restarting logic, switching usb ports, trying different projects, and i have the same problem. Any help??!

    Have you tried this button?

  • Midi controller stopped working

    I'm hoping someone can help. My midi keyboard stopped working in the tune that I'm working on. It works fine in other LP7 sessions that I'm working in but it won't work in this one particular session.
    The transport menu shows "No In" for midi... I'm wondering if that is a clue to anything....
    I'm using a M-audio Radium USB keyboard.
    Thanks!

    Today's rant is brought to you buy the word "bollocks".
    This post is the 3rd or 4th report of a connection between the physical input and the seq. input disappearing. Sorry, but this is "bollocks" and needs to be addressed.
    "Thanks for letting me vent, honey. And for letting me use the word "bollocks". I feel much better now."

  • After editing a message in firefox (whether yahoo mail or any other app) the keyboard stops working and I just get an audio sound with any key stroke.

    This problem occurs with any page that requires keyboard input. If I make an errot in typing and have to go back or edit a sentence the keyboard stops working. THis only happens with Firefox and not with any other browser (Chrome, Safari etc)

    Hello,
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • I Mac(OS 10.6.5) Core Audio MIDI doesn't work

    I just bought iMac. Problem is Core Audio/MIDI doesn't work at all.
    I installed Logic Studio, Battery..but none of them working with MIDI interface.
    When I worked with Macbook(OS 10.5) before, there was no problem at all.
    I Used Mbox2 for audio interface and mic pre, and master keyboard with USB port as MIDI device.
    Now I can't work at all with my music project because of audio/MIDI problem.
    I tried to fix it opening Audio MIDI setup but I only get the message saying..
    "Required Software extensions are missing"
    and when I go to the the page after clicking OK, then it says that I need to get supported by software company for upgrade, which I have the latest version...
    also I get the message "Core MIDI quits unexpectedly...".
    These two message pop up every time I open Logic Studio too.
    I hope solution for this matter.
    I really need to focus on producing my music...

    So, after long work around which failed this is how i made it work!
    I think the problem is the latest update of the system (10.6.5) I am back now on 10.6.2 and all is fine : this is how i managed it based on the fact that the whole thing was working fine on my MBP.
    1. download a copy of SuperDuper from the net
    2.Open MBP and then firewire Target mode the iMac to the MBP
    3. with the SuperDuper clone the Hard disk of the MBP to the iMac
    This will erase all on your iMac and make its hard disc exactly the same as the MBP; it also makes it bootable.
    4.open iMac alone
    5. insert the original system dvd for the iMac and install the SnowLeopard system BUT DO NOT UPGRADE
    6.restart as demanded and you should be on 10.6.2
    with your desktop and hard disk running exactly as it was on your MBP
    7 when opening Logic (or the other pro apps like FCStudio pro then you will be asked for your serial numbers which it duly accepts
    8. all then should be running fine
    Total time depends on size of your MBP hard disk (for me it took c. 3 hours including the reinstall 10.6.2) but all is now as it should be

  • USB MIDI keyboard not working

    Hi everyone,
    I recently upgraded to a Macbook (White) and I haven't been able to get my MIDI keyboard to work with it. It's a Novation Remote 25 LE, and all of the documentation for it claims it is fully USB compliant and does not need any drivers to function. Well, that doesn't seem to be the case. I used the USB drivers for OS X that Novation has on their site to no avail.
    The catch is, it worked flawlessly on my old 12" Powerbook without drivers. Comparing the two configurations, I notice that using the Audio MIDI Setup program under utilities the Remote LE shows up, but has no ports assigned to it, nor can I add any, while it has "Remote LE" listed under port on my old Powerbook. Anyone have an idea how I can get this up and running? Thanks in advance!

    There's another user with a very similar issue to yours. It makes me think that Leopard is the problem here--unless you had Leopard installed on your PowerBook?
    Perhaps keeping an eye on this thread will help:
    http://discussions.apple.com/thread.jspa?threadID=2031411&start=0&tstart=0
    ~Lyssa

  • The escape key in my wireless keyboard stopped working

    Dear list members, suddenly, the ESC key in my wireless keyboard stopped working. As it looks normal and all other keys are working properly, might it be a configuration problem? Could you please help me? I'm working on an iMac 27 late 2012 running OSX 10.10.2. Thank you.

    Please reset the SMC, this may take 2-3 attempts and post back with the results.
    iMac SMC and PRAM reset

  • TS3048 Number pad on extended keyboard stopped working after updating to OSX 10.9.1. Testing keyboard on old system still works perfectly.

    Expanded keyboard stopped working correctly after updating my system from OSX 10.8.6 to OSX 10.9.1 and now 10.9.2. The keypad numbers do not work although the numbers along the top of the keyboard work fine. Moving the keyboard back to computer still using 10.8.6 and it works fine.

    See if zapping the PRAM works.  Check out KB Article:  http://support.apple.com/kb/HT1379 Resetting your Mac's PRAM and NVRAM 

  • Dual screen configuration makes keyboard stop working on X

    Hi. My computer is working just fine. And my video card has two outputs (Nvidia[GeForce 9600 GT] (rev a1)). I got a second monitor, and I was trying to configure Xorg to use the two of them in a dual screen configuration.
    I tried creating the 10-monitors.conf file like described in  https://wiki.archlinux.org/index.php/NV … e_monitors, and here is what happens. X does use the two monitors, and I can even see my mouse pointer moving from one to the other. But then my keyboard stops working, and so do the mouse keys, only moving the mouse around works.
    I have the impression this is related to the missing InputDevices in the ServerLayout. Something in my configuration probably needs that still, if the ServerLayout gets explicitly configured. What should I do? Could this be related to HAL somehow? How do I turn off HAL without it trying to kill me?
    Thanks.

    I have been using nvidia's TwinView for a long time, currently with two different monitor sizes. There is no need to do anything with udev if you have your xorg.conf set up properly. Here's what mine looks like, though you will have to adapt it according to your hardware.
    Section "ServerLayout"
    Identifier "Dual Layout"
    Screen "Screen0"
    EndSection
    Section "ServerFlags"
    Option "AutoAddDevices" "on"
    Option "AutoEnableDevices" "on"
    Option "AllowEmptyInput" "on"
    EndSection
    Section "Monitor"
    Identifier "Acer"
    HorizSync 30-81
    VertRefresh 56-76
    EndSection
    Section "Device"
    Identifier "GeForce 210"
    Driver "nvidia"
    Option "NvAGP" "3"
    Option "NoLogo" "1"
    Option "RenderAccel" "true"
    Option "AddARGBGLXVisuals" "true"
    Option "TwinView" "true"
    Option "SecondMonitorHorizSync" "24-70"
    Option "SecondMonitorVertRefresh" "56-75"
    Option "MetaModes" "1680x1050, 1600x900 @1600x900"
    Option "TwinViewOrientation" "RightOf"
    Option "WrappedFB" "true"
    EndSection
    Section "Extensions"
    Option "Composite" "true"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "GeForce 210"
    Monitor "Acer"
    DefaultDepth 24
    Subsection "Display"
    Depth 24
    Modes "1680x1050" "1600x900"
    ViewPort 0 0
    EndSubsection
    EndSection
    It is best to let as much as possible be handled automatically, but getting two screens working properly requires a bit of tweaking.

  • Bluetooth and Built-in keyboards stop working randomly

    While I've read several threads about the built-in keyboard on MBPs stop working I've never seen one quite like this.  We're on a late 2012 17" MBP, Core i7 with 4GB memory.  Randomly both the built-in keyboard on the machine AND the Bluetooth keyboard stop working - but not fully.  On both the arrow keys and backspace key still work but nothing else (CMD, space bar, etc).
    What's really odd is a USB keyboard works perfectly when this happens.  We plugged one in and blamo, it worked just great - but the built-in and the bluetooth ones continued to not work (just as described above).
    The user commented that this has been the case on her last 2 machines and both were built from scratch.  That leads me to think it's software rather than hardware - I went through everything that was running, shutting down everything I could - with no good results.  If you log out/back in (or reboot) that fixes the problem as well (further leading me to software)
    Thoughts anyone??
    Thanks!
    -Ross

    Hello RosslnCO2,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    About NVRAM and PRAM
    http://support.apple.com/kb/ht1379
    Best of luck,
    Mario

  • I have a problem with my PC mobile device that the keyboard stop working and the mouse also

    I have a problem with my PC mobile device that the keyboard stop working and the mouse also

    All I can suggeset is:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Have you looked at the AMDS topic of:
    iOS: Device not recognized in iTunes for Windows
    Do you have han image capture programs linstalled like for a camers or scanner?

  • Half of keyboard stopped working.

    Half of my Compaq V6000T laptop keyboard stopped working this morning- the right half. A USB keyboard works without issue. Will replacing the keyboard be sufficient or is there an underlying issue here?
    Many thanks!

    Follow this tutorial until you see that you remove the keyboard.  http://www.insidemylaptop.com/disassemble-compaq-presario-v6000-laptop/  Make sure to keep track of all screws and parts, and be careful not to shock your laptop with static electricity!  When the keyboard is removed check to see that the wire that plugs in is seated properly; you may want to clean it off a bit or unplug it and plug back in.
    <<--Kudos
    Please give Kudos. What other kind of recognition could I get?
    Have I solved your problem? Mark solution as accepted.
    I try to hate Macintosh. I really do. But I can't bring myself to hate any electronic device.

  • Alt key make my keyboard stop working

    I have notice this in photoshop,most time i hold alt key.it make the keyboard stop working,until i do restart,Now it happening in mac..when i try to view my library by holding the alt key in finder...my keyboard stop working
    anyway to fix this?

    Go to System Preferences, Keyboard, Modifier Keys, Restore defaults
    Then Keyboard Short cuts, Restore defaults
    Then if not working
    Reset the PRAM
    http://support.apple.com/kb/ht1379
    Reset the SMC
    http://support.apple.com/kb/HT3964

  • G72-c55dx keyboard stop working within 15 min of use

    G72-c55dx keyboard stop working within 15 min of use or at rest check setting power bios updated late;s driver ver.?

    Hi @rimesci ,
    Thank you for your query, I will do my best to assist you!
    I understand that when you start your notebook the keyboard works for approximately 15 minutes and then stops responding.
    You have checked the power settings, updated the bios and drivers but it still persists.
    It sounds as if you have a conflict somewhere.  The keyboard works OK and then something kicks in and keyboard stops.
    I would try a clean boot to try and locate the issue. Perform a clean startup to determine whether background programs are interfering with your game or p... (from support.microsoft.com)
    If this has not located the issue, do you feel any overheating  on the unit?
    If the issue persists, you can try a restore back to before this issue occurred.   Using Microsoft System Restore (Windows 7)
    If that did not work or is not a possibility, I would do a recovery back to factory.
    Performing an HP System Recovery (Windows 7)
    During the recovery process you will receive an opportunity to backup your personal files to prevent data loss.
    If you have not done one recently, I suggest you do one now.
    restoring Files that were Backed Up Using HP Recovery Manager (Windows 7)
    If you are still having an issue, I suggest contacting HP support. They can remotely log onto your system to help with resolving issues.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region  Technical Support Sitemap
    I hope this helps.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Maybe you are looking for