M audio mobilepre usb and logic 8

sorry...this is driving me nuts. I have my mobilepre set up to go through my speakers which works for my system but just not logic...logic will not play thru...any suggestions?

Hi phjo,
Thanks for the info. I guess I'll have to wait and see when my new iMac arrives.
By the way, besides a newer and faster processor, is there any other major difference between the old 20" iMac and the new Core 2 Duo one?
Thanks,
J Silverman
12" Powerbook G4 Rev A 867 Mhz 640 MB RAM Mac OS X (10.3.9) 4 Old World Macs including the first Powerbook with a color screen!

Similar Messages

M-Audio MobilePre USB on new iMac

Hi All
Well, I ordered my 20" iMac on the 25th of August, and it wasn't suppose to ship till tomorrow. And today, I found out I got a nice free upgrade to the new Core 2 Duo 20" iMac, which really made me happy Looks like I'll be getting one of the first BTO Core 2 Duo iMacs, which is really awesome
Anyway, my question to you all is about the M-Audio MobilePre USB and if any of you got it working on the Intel iMacs running 10.4.7. Last I checked, they only had Intel and PPC drivers for upto 10.4.6. My Powerbook is running 10.3.9 so I can't test to see if it would work with the latest OS (plus, the power adapter had a melt down, so I can't even use it at the moment).
Thanks,
J Silverman
12" Powerbook G4 Rev A 867 Mhz 640 MB RAM Mac OS X (10.3.9)

Hi phjo,
Thanks for the info. I guess I'll have to wait and see when my new iMac arrives.
By the way, besides a newer and faster processor, is there any other major difference between the old 20" iMac and the new Core 2 Duo one?
Thanks,
J Silverman
12" Powerbook G4 Rev A 867 Mhz 640 MB RAM Mac OS X (10.3.9) 4 Old World Macs including the first Powerbook with a color screen!

Can't hear sound with M-Audio MobilePre USB driver in Logic 7.2

Hi. I've installed an M-Audio MobilePre USB interface to hook up a nova mic and i've also hooked up an oxygen eight midi keyboard. Can't get any sound from Logic when i select M-Audio MobilePre USB as my driver, and can't get Logic to recognize my midi keyboard. I have downloaded the latest M-Audio MobilePre USB update off the web, and still nothing. I'm new at all of this. Can someone help me? Thanks in advance.

I'm wondering did you install the drivers and after that plugin the usb devices or did you leave them plugged in during install?
What happens when you unplug the midi interface and put it back in? Is it recognized by Logic by putting up a dialog that something has changed?

No audio selection after loading Driver for M-Audio MobilePre USB

I recently downloaded the latest Driver for my M-Audio MobilePre USB on my Mac Pro and the audio input out put selection in the system preferences are not showing up. However it does show it listed in "Other" in system preverences, but only the volume control.
How do I get it the input and output selection to work?

I tried calling them but they said you need to have a service number, when you registered, which I got mine about 9 or so years ago and dont remember any numbers!
You need to purchase a number to talk to service, its a bunch of c#@@p.

Home Recording w/ AT3035 & M-Audio Mobilepre USB

Hi All-
I am looking for a good way to get sound from my mic (Audio Technica AT3035) into my iBook (G3, OS X.3.9, 900MHz, 256 MB RAM).
A friend recommended the M-Audio Mobilepre USB, but I've read about people having problems w/ condenser mics.
I realize ideally I would get a new computer and an Mbox, but that's not an option. I'm a grad student, and funds are very limited. Even the Mobilepre is stretching it.
Any suggestions/comments?
Thanks,
Wes.
iBook G3 Mac OS X (10.3.9)

Wes: I purchased a Behringer mic200, which is a low priced tube preamp with +48v phantom power for a condenser mic. I have been very happy with the results and features. I know that A.R.T. also makes a good one. Only problem for you is that these preamps are powered via a wall wart. Set up is via the audio input jack as opposed to usb.

M-Audio MobilePre USB

Hi,
Do anybuddy use M-Audio MobilePre USB??
I face a problem with it.it got latency when i'm doing recording with it!!
How to solve this problem??
i own a Firepod,din't have this problem at all...almost 0 latency!!
Help...

Jord:
You again..haa..
erm..i did try to lower down the buffer size..but seems still the same...is it the software driver update gonna be install to solve it??

M-Audio Fast Track USB and Logic Pro X

I wanted to share this tip in case anyone else has the same issue I had.
I attempted to use the Fast Track USB audio interface with Logic Pro X. It had worked in every version of Garageband since version 3, as well as older versions of Logic Express and Logic Pro, so I assumed it would work out of the box with Logic Pro X.
With it plugged in correctly, and my guitar connected to it, I added a new audio track to my project - ensuring the Fast Track was set as the input device, and input 2 was selected (input 1 is the XLR input on the device) - and enabled playback monitoring. There was no sound. Additionally, the button to enable recording was not present for the track. The same was true for every new track I added that used the Fast Track as the input device.
I tried everything: in Logic Pro X > Preferences > Audio > Devices, I toggled between the built-in input and the Fast Track; I restarted the software; I unplugged and plugged in the Fast Track, and I restarted the system. None of these worked. Then I had an idea.
In the Applications > Utilities folder on my Mac, I opened the Audio MIDI Setup app. This opened the Audio Devices window. I clicked on the plus at the bottom left and chose to Create Aggregate Device. I named this device by double-clicking the name on the left, then on the right I checked Built-in Input and Fast Track, taking note of which inputs belonged to the Fast Track in this new device (for me, inputs 3 and 4).
After restarting Logic Pro X, I chose this new aggregate device as my input device, chose input 4 for recording, and suddenly everything worked correctly.

I contacted Logic Pro X support and they said that they are working on an update. They were very helpful, so no worries guys. They know that there is an issue and they are working on it A.S.A.P. They told me if I needed to continue production to use time machine and go back before the update and restore Logic Pro X (before 10.0.5).
They understand, so give them a break... They are working as fast and hard as they can. I talked with one of the programmers directily. They are probably not getting any sleep over this.

What do you think about M-Audio MobilePre USB?

I need to buy an audio interface with my mac, but I don't really know what to buy. The MobilePre USB seemed to be okay for my budget, but is there any latency problems since the hardware is USB connected?
What are your other suggestions for an audio interface that works well (Edirol, M-audio, others???)? I don't need more than two simutaneous audio inputs.
Thanks again!
Etienne Lehoux-Jobin

I have the MobilePre and I'm pleased with it. The latency is not really an issue for me. It's low enough that when I record direct with my bass, I don't notice it at all. If you use the hardware monitoring headphone jack, be sure to turn off software monitoring, or you will notice a very brief echo/reverb sound due to the latency. I don't use the hardware or software monitor when recording guitar, and I either plug the amp's line out into the preamp or mic it. For vocals I just turn off my monitors (or you could turn off software monitoring in Logic) and plug in headphones to the zero-latency jack. Sometimes I will turn off hardware monitoring and add some reverb to the vocal track while recording, and the software monitoring works just fine too... I don't notice the latency.
One nice feature is you can plug in two mics, and two instruments and record them all at once, but you still only have two channels and can't separate them into four signals. That means you need to adjust your instrument volume and the preamp gain before recording since you can't adjust the mix later.
But I do have my complaints with the MobilePre! The biggest annoyance is that after a while the device will make bizarre noises that get worse and you must reconnect the device. This happens after a few weeks maybe. But what's more annoying is sometimes after I reconnect the device my iBook will hang for several minutes before recognizing the device. On one occasion it caused a kernel panic and I had to reboot! I really hate this, since I take my iBook to work every day and have to reconnect when I get home. Plugging the device in while the iBook is still sleeping, then opening the case seems to work better.
Another thing to beware of is the preamps aren't the best quality (obviously, for $150!). When I turn them up past 3/4 they introduce noticable noise and at night they pick up some weirdo radio station. I rarely need to set them past 1/2 though (which is low enough that I can't hear the radio station interference) and can boost the signal in Logic if it's necesarry.
Overall, the MobilePre was so cheap the small problems weren't enough for me to say I regret buying one. I haven't heard anyone else have the same problem with reconnecting the device so I can't say you'll have the same problem. I've had mine a year and I'm looking to get a Firebox soon, since I have started to outgrow my MobilePre. But it has served me well.

Mobilepre USB and GarageBand

I have been using m-audio's mobilepre usb interface with my intel I-mac for sometime without any problems, but since my update to Leopard I'm having problems. I have an M-audio Nove mic using phantom power with the mobilepre hooked to the system, but when I try to record I get pops and static and dropping out. I have updated the drivers, but to no avail. It seems as if something is interfering with the system. It will start to record coreectly, but then it goes haywire. If anyone is or has had this problem please help.

http://www.bulletsandbones.com/GB/GBFAQ.html#mobileprenoise ?

(MacOSX Lion 10.7.4) The problem of connecting the audio interface (USB and FireWire), grained acoustic distortion!?

When you connect the audio interface to usb or firewire grained acoustic distortion, there is no loud noise in the acoustics! In the old "iMac24 Snow Leopard" was not like this!
Just bought the iMac21 lion, installed the new drivers and the two interfaces of different firms is presented, this acoustic problem.
I understand it comes from a usb and firewire!?
Help Me_____
Sorry for my english

Well, it's been a few days and with no response I thought I'd look for another solution. I've been trying this software called iVPN, apparently it's like a front-end to OS X's built-in VPN server. Anyway, I disabled the VPN Server from the Server app, turned on iVPN and was VPN-ing from my iPhone over 3G in notime. It's a great app, though it kinda ***** that the server can't do what it's built to do. Since VPN was the big reason I got Server in the first place, I'll probably uninstall it and stick with OS X's built-in file sharing and iVPN.

Trying to record using M-Audio MobilePre USB- Signal but no sound

I'm trying to record an acoustic guitar using the M-Audio MobilePre. GarageBand is picking up the signal while I'm recording, but when I go to play it back, I'm unable to hear any sound. What am I doing wrong?

http://www.bulletsandbones.com/GB/GBFAQ.html#usecomputersspeakers ?

M-Audio MobilePre USB Drivers settings with G4 PB 1.33

Can anyone tell me the optimum driver settings for play and record on my PB G4 1.33GHZ 768MB RAM
Currently getting intermittent 'cracks' with 4 audio and 4 Instrument channels with not a lot of plug-ins. CPU AUDIO reading 80% at 128 I/O buffer, larger disk buffer unchecked.Thought it was 'static' but no!
Driving me mad!!!
Will a Firewire I/O improve things, if so what?
Powerbook 12 1.33GHZ Mac OS X (10.4.8) 768MB RAM

Hi, I'm new to logic and the forum but with a similar powerbook I wanted to see how far I could push it without having problems.
With 28 audio tracks and 3 instruments with maybe 8 reverbs, compression, flanger and eq while playing an additional audio instrument my CPU AUDIO meter never goes above 60-70%. The I/O meter peaks every so often but I don't notice any ill effects.
I've set the I/O buffer from 0-1024 and larger disk buffer checked with not much of a difference. The only thing that affected anything was having cpu performance set to automatic in the system preferences/energy settings.
When you say "cracks" do you mean latency while recording a guitar, etc.? I'm really curious to find out because I'm shopping for an interface to record guitar with amp modeling and have been told firewire's the way to go. The TC Electronics KONNECT 24D comes highly recommended because it has onboard DSP and Hardware monitoring which does'nt use CPU power.

M-Audio Delta 44 And Logic Express 7.1.1

I recently install a M-Audio Delta 44 sound card and installed in my Mac G4 Desktop computer. Now when I use 'Logic Express 7.1.1' I get a feed back loop when I stop the playhead. When I start it again everything is fine till I stop it, feed loop! I know the problem is with the card because when I change to internal sound there is no problems. Has anyone heard about problems with the Delta 44 sound card?

The Delta Series is older than the FW410.
I have a 2496 that, i must say, sounds good and some years ago M-Audio solved the problem that you have (and me too!) but after 3 or 4 years here it again after a driver update.
And the worse thing is that last driver incarnation provoked a lot of kernel panics on my Mac so I decided to unmount and sell the board.
I think that the audio interfaces to get are those by RME, Presonus, MOTU, Apogee etc.
If you don't need many inputs than I say a Duet will be perfect.
I own a MOTU Traveler and is a good interface too (there are better and worse ones).
Another good choice could be the Presonus FireBox.
But if you make a search here you will find a lot of hints.
cheers
rob

M-Audio MobilePre USB Popping

Hi
I've read some of the posts here and elsewhere and cannot find a solution.
I have a brand new MacBook Pro, all maxed out ( not Retina Display ). My previous (and dead) 17" MacBook Pro 2007 model didn't have this problem. My speakers randomly pop and quite often when new windows or apps open or close. I've tried all sorts of supposed solutions with latency settings and cannot fix this.
Could this be due to USB 3? My old MBP had USB 1 and USB 2.
If this is true, I don't really want to spend more money looking for another interface when this one worked great for years.
Pat

Jord:
You again..haa..
erm..i did try to lower down the buffer size..but seems still the same...is it the software driver update gonna be install to solve it??

Using 2 M-Audio Mobilepre's

Hi. I want to record more than two mics at once, so I bought a second M-Audio Mobilepre USB, and I was hoping to make an aggregate audio device with the two of them. Unfortunately, my computer only doesn't recognize them as two separate devices, and I can't use them simultaneously. Any suggestions?

Oh, but there are two listed in the system profiler. The audio programs just recognize them as one, presumably because they're identical. Can I label one differently or something?

M audio mobilepre usb and logic 8

Similar Messages

Maybe you are looking for