M-Audio Ozone compatible with Garage Band?

I'm trying to set up a very basic setup so my father can mess with Garage Band. Does anyone know if the M-Audio Ozone is compatible with GB? I'd like to be able to use the microphone and DI inputs as well as the midi functions. Thanks for your help!

I have never used one but there should be no reason why the Midi and audio interface would not work. I don't think the control surface part will have full function, not that is a big deal.

Similar Messages

  • Are All USB Piano Compatible With Garage Band?

    Post name says it all, is every USB Piano compatible with Garage Band?
    Such as this one, http://usb.brando.com.hk/proddetail.php?prodid=00186
    Does anyone have any suggestions for USB Pianos for someone on a budget?

    is every USB Piano compatible with Garage Band?
    http://www.bulletsandbones.com/GB/GBFAQ.html#keyboardcompatibility
    Such as this one
    read its system requirements
    Does anyone have any suggestions for USB Pianos for someone on a budget?
    http://www.bulletsandbones.com/GB/MIDIControllers.html

  • Are all electric keyboards compatible with garage band?

    are all electric musical keyboards compatible with imacs as far as their drivers are concerned?

    is every USB Piano compatible with Garage Band?
    http://www.bulletsandbones.com/GB/GBFAQ.html#keyboardcompatibility
    Such as this one
    read its system requirements
    Does anyone have any suggestions for USB Pianos for someone on a budget?
    http://www.bulletsandbones.com/GB/MIDIControllers.html

  • Is a Steinberg C1 audio interface compatible with Garageband  if not what is the best product

    Is a Steinberg C1 audio interface compatible with Garage band?  The unit does not show up in the audio devices window even though it is connected to the computer and all software downloads have been completed.

    I have tried the driver(s) from Steinberg.net, and tried yet again yesterday. It actually worked for some reason. I have noticed the device ony ‘fires’ when restarting if you have it connected, and after the latest driver install, Garageband actually recognized it. Don’t know why though.

  • Audio INTERFACE that works with Garage Band??

    Any suggestions for a good inexpensive audio interface? Fast Track is awful.... Something about 250 or under?
    Want to plug guitar into device, device into MAC - and lay down tracks.

    ZoohGirl wrote:
    Do the second two in the top row work with Garage Band
    there isn't such a thing as "working with GB", if it works on a mac it will work with GB
    and ProTools?
    i know very little about protools, though they tend to be more proprietary
    can we plug them in (to guitar and MAC) and roll?
    yes
    Or is a mic needed??
    "needed", no. there are both 1/4" as well as XLR jacks, as you can see in the pics. you can use either.

  • Using Kurzweil PC2x with garage band

    Hello,
    I'm having troulbe getting my Kurzweil PC2x to work with garage band. I'm using an m-audio midi interface. I'd be grateful for any tips or pointers!
    Thanks,
    Ospo

    You have this posted twice. See your other post.
    Kurt

  • Bose 5 companion issues with Garage Band 10

    I've noticed in the Audio/Midi utility that the Audio input format for Garage Band 10 is 24 bit 44100 Hz yet the Bose Companion 5 speakers are 16 bit 48000Hz.
    I don't pretend to know the difference - can anyone explain in plain simple English and is it significant?

    GarageBand does not support frequencies higher than 44100 Hz.
    I'd set the Audio Midi preferences to 44100 Hz for all devices you want to use with GarageBand, i.e., if you are noticing a distortion.
    Re: Does anyone know the supported audio formats for the latest version Garageband for Mac (i.e. 2013), including sample rate and bit depth?

  • I can't get background audio to work in garage band 1.3 ios6.1 .also no options in settings to turn it on?

    I can't get background  audio to work in garage band 1.3 iOS 6.1 also no option in settings to turn on or off?

    I had the same problem, try this:
    In your home directory, go to Library/Caches/
    (make sure you are in the library in your home directory, not the library at the root level of the hard disk).
    and remove this file: com.apple.audiounits.cache
    You can drag it to your desktop if you like or throw it away.
    Then relaunch garage band, it will rescan all audio units.
    If you have the Kontakt audio unit installed in YourHardDiskName/Library/Audio/Plug-Ins/Components it should recognize it and include it in your list. You can toss that cache file any time you want Garage Band to rescan your audio units.
    I had a problem with Kontakt on an upgrade that broke it, GarageBand saw it and put Kontakt on its list of broken Audio Units, it would never load it after that... after a new rescan, it was fine.
    Good luck

  • M-Audio Fast Track and Garage Band

    Grettings, friends.
    Does M-Audio Fast Track work well with Garage Band? I understand there may be a spread of opinions on this, but any feedback would be appreciated, particualry from those who have experience with both.
    And for those who have had problems with Fast Track, can you recommend anything better in roughly the same price range?
    Thanks in advance,
    DPL

    Hi David,
    The Fastrack works fine.
    More money buys better converters, preamps, etc.
    There's a certain class of "competent" interfaces around the same price as the Fastrack that all offer good bang for the buck, OK audio and "work well."
    Popular USB interfaces:
    http://www.sweetwater.com/c695--USB_Audio_Interfaces
    I've had decent results with M-Audio. Not in the same league as higher end stuff from RME or Apogee, but I use both, depending on the circumstances.
    MMM

  • Need help with Garage Band 11 and my TASCAM interface recording Real Instrument

    I am using a TASCAM US-122 interface with garage band 11 on a mac at 32 bit running osx 10.6.6.  Garage Band preferences / audio input and output set to TASCAM (which means it recognizes it) , but when using Real Instrument for the TASCAM and the track is armed , etc... the record function works when started except "no sound" from the device I am running thru TASCAM is being detected.
      I am getting sound out of the TASCAM and simply running an AKAI mpc beat as a test.  I am sure there is something simple I have yet to do but not sure what it is in Garage Band. 
      Can you help ?   Thanks. GARY

    with the real instrument track selected...
    make sure the info pane is showing on the right (click the little "i" on the bottom right to open it; "Real Instrument" should be highlighted in blue on top).
    On the bottom of the info pane it says "Input Source" and "Monitor."
    Make sure the Input Source is set to the Tascam channel you're using (the channel, mono or stereo, that you've plugged your MPC into).
    And if you want to hear it as you record, make sure the Monitor is set to ON.

  • ALERT: Do not use Ae or Pr with Garage Band open!

    This was driving me insane all week.
    I was creating scores with Garage Band.
    And Pr and Ae were playing back audio & timelines AT THE WRONG SPEED.
    As I was on the phone with tech support, I realized this was caused by Garage Band being open!
    As soon as I quit it, CC went back to normal.
    Anyone who uses GB -- let's please file bug reports.
    Keywords:
    ADOBE AFTER EFFECTS PREMIERE CREATIVE CLOUD GARAGE BAND MAC AUDIO SLOW SYNC PLAYBACK ISSUES SLOW

    I remember having similar issues setting up audio workstation DAW's for Slave/ReWire. Sounds like GarageBand took control of your Audio Card and set it to a different "Sample Rate" which would speed or slow the audio being used in other apps.
    Sounds like you'll have to use GB either before or after Ae/Pr to prevent this... or figure a way to set your sample rates to match.

  • Can I use a MOTU 828mII interface with Garage Band

    I have a MOTU 828mII interface and I want to use it with Garage band. How do I set it up?

    You should be able to no problem . I might be speaking to fast .. Now you didn't say what your weapon of choice was. An iMac or what.  I use a MOTU 128. With an iMac.
    As I remember you install the software for you MOTU unit. Then go check for the newest driver and install it.
    Now for G.B... look in the preferences for GB ..  Look at the Audio/ Midi settings. There you can select the unit you want.
    Peace ...

  • I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you have too many live channels

    I'm frustrated, I am doing everything you recommend, I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you ave too many live channels, the disk is slow prepare...can you help?

    Quote from: Richard on 15-November-07, 20:33:05
    tornado2003,
    What you need to do is boot into Safe Mode. Then delete the VGA Drivers.
    After that boot normally and install the latest nVidia ForceWare Drivers
    Take Care,
    Richard
    i guess you missed that:
    Quote from: tornado2003 on 15-November-07, 17:26:52
    ive tryed booting xp in safe mode but it just freezes after it loads up a couple of needed files .
    ive even formatted my hard drive and tryed installing a fresh xp on it but it just keeps locking up when it gets to the "starting windows setup" .(this is just after it loads all the drivers from the xp cd)

  • When I bought mac it came with garage band had to cleanup computer so reloaded all soft ware now cant find garage band or reload windows xp

    when I bought mac it came with garage band had to cleanup computer so reloaded all soft ware now cant find garage band or reload windows xp

    richardfromdes plaines wrote:
    now cant find garage band
    reinstall it:
    http://www.bulletsandbones.com/GB/GBFAQ.html#reinstallgb
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Does airport express work with garage band in lion?

    Actually I know it can work and there are apps out there to make it work but I heard a rumor that Apple was going to allow functionaliy between the two in Lion. So my question is... 
    Will Airport Express work with Garage Band in Lion or do I have to buy third party software?

    I believe the HP 2840 can be connected either via Ethernet or USB. If connected to the AirPort Express Base Station (AX) by USB, only the basic printing functions will be shared out; the scanning, faxing, copying features are not supported.
    If the AX is configured so that its Ethernet port is enabled, the it may be possible to gain all of the printer's features by connecting it to the AX by Ethernet. In this case, the printer will use its own Print server to share out all of these features.

Maybe you are looking for