M Audio radium 49 problems

I have an M Audio Radium 49 connecting via USB. Not used it since upgrading to OS 10.4.2 now it aint there no more[midi devices] and the darn thing works no longer in Garageband. Any ideas anyone?

I saw on m audios website that they were updating some of the new mac drivers because of issues and that they would be available shortly. Try going to
m-audio.com and redownloading the driver.....good luck...bc

Similar Messages

Itunes wont launch due to audio configuration problem

Itunes won't launch saying there is a audio configuation problem, this started all the sudden no new software added no updates, no configuration changes. I've tried uninstalling and reinstalling without improvement and all other audio programs work fine. any ideas?

This is usually a Quicktime problem, see this article:
http://docs.info.apple.com/article.html?artnum=304424

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share form

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

CS4 Audio Export Problem

Hi
I'm fairly new to CS4 and have picked up an audio export problem, more than likely with a setting of sorts. For some reason when I export to MPEG2 -DVD via the Media Encoder, the video portion is fine as well as any audio that has been placed and edited on tracks audio 1 and 2 in PP. However, if there is additional audio placed on tracks 3 or 4 for example (say a music MP3 overlay) then this does not come out ... only audio placed on tracks 1 and 2 in PP come out. I have checked the obvious like making sure the tracks aren't muted etc but to no avail. Also tried changing from PCM audio to MPEG ... Stereo to 5.1 mixdown ... nothing doing.
Any help would be greatly appreciated.
Thanks and regards
Videoman 1
SA

Thanks Harm ... got SnagIt and with a few helpful YouTube tutorials ... am in business. Hunt and John, also thanks ... the other method equally as good. Now, I have attempted to attach my screen shot which should display my CS4 timeline and associated audio monitor windows above. By the way, this was for a wedding and as indicated, you will notice an MP3 lying in audio track 3 which as mentioned is my problem as it is not audible after render via Media Encoder. But remember, the moment I slip this MP3 up into audio track 1 or 2 above ... problem solved. I know there must be something small like a setting gone wrong or incorrect. As mentioned, any help would greatly appreciated.
Thanks to you all.
Regards Paul ( Vryheid, South Africa )

Audio sync problem with videos imported from iPod Touch

I have an iPod Touch 4th Generation that I used to shoot video at a family birthday party. When I imported the footage into iMovie '11, the audio is not in sync with the video (video is about two seconds behind audio) and there is only the left channel of audio. I verified that the video on the iPod plays just fine--no audio sync problem, both left and right channels work. I just upgraded to iOS 5 on the iPod Touch. The iMac is running Snow Leopard 10.6.8.
As a workaround, I can import the video into iPhoto instead. When I play the video in iPhoto, there are no audio sync problems and both channels of audio can be heard. I have imported other iPod Touch videos successfully into iMovie '11 in the past few months, but this has been the first time these problems have occurred. Any help would be appreciated.

Premiere cannot handle clips with variable framerate.
Your converted clips need to have constant framerate.
Otherwise use a converter like Handbrake.

When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can you please help me?

When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can anyone please help me?
Sincerely,
Eric

Run this when you have the problem and post the results here.
EtreCheck
This will tell us what is loaded

Mac mini audio output problems

This is similar to a problem that appeared before, but with a different twist.
On 4 July all was well. On 5 July I switched on and there was no "chord" from the Mac. When I collected my mail - no sound from my speakers (which are part of my screen). Logged on to a couple of sites - no sound.
The System Profiler, under the "Audio (Built In)" category, says: "No Built-in Audio." I know that's wrong because it's always worked before and when I plug my headset in it works fine.
When I go to the Sound preferences panel in System Preferences, it finds the headset but if I unplug that it finds nothing.
I tried running the hardware test (by putting in the OS X install disc and holding D during startup.) It couldn't find a problem.
So, as far as I can see, audio output is fine for the USB headset output but not for the others. Is there a simple fix? The nearest Apple store is about 200 miles away and I don't fancy the idea of posting the Mac off.
(And I think it's still under warranty for a couple more weeks.)
Mac mini Mac OS X (10.4.10)

hello mini users with the "no audio output" problem
it seems that there are faulty output jacks in the macbook and the mac mini
there are two things you can try:
i tried everything and began thinking about what new software i had installed. it was "macam" which enables you to use older webcams on OSX. i needed that to use my webcam on skype.
macam installs a file called "macam.component"
if you have the same, do this - take that file out of:
(your hard drive)/library/quicktime - macam.component
and just put it on your desktop
restart, then in your sound pref's choose your audio output (if doesn't work restart again)
the first time i took it out, i had my sound back instantly, another time i had to choose audio output in sound prefs. you kind of have to try different things. after you get your sound back, you can put back "macam.component" to use your webcam.
it seems macam causes the problem, the two can not work at the same time.
the second thing: if you dont have "maccam" try plugging and unplugging output jack a few times and restarting until you have sound.
the problem still could be with the OSX 10.4.10 update / quicktime...or maybe even a hardware problem like others with macbooks were saying (with the red light), not sure.
people with macbooks and who have the red light on, say to use a paperclip to turn off the switch inside.
my mini does not have a red light on. i tried using a paperclip but it doesnt work.
hope this helps, beleive me i feel your pain!!!!
what good is a computer without sound?
extremely annoying problem that i hope apple looks into and fixes
-andrew

Itunes can't run bc of audio configuration problem

Well I've been using itunes for about 2 years now and just recently i installed the newer version. It was working fine until today when my computer told me ther was some kind of computer error and that i should do a system restore. So i did a restore to about 2 weeks ago which was before i updated my itunes. And then i was getting the message that my itunes was missing files and could not run. So i ran a repair on it and still got the same error. Then I deleted it adn reinstalled and I got the error "Itunes cannot run because it has detected a problem with your audio configuration.
So then I undid the system restore and tried itunes to see if it would work. And I was still getting the same message that itunes cannot run because it has detected a problem with your audio configuration. So then I uninstalled it and reinstalled it and still getting the same message.
Can someone help me out? What problem would it be with my audio configuration? I haven't changed anything. Is there something i can adjust to fix the problem? I'm clueless....

the message is typically produced by a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.)
perhaps let's start with the following document:
iTunes 7 for Windows: iTunes had detected an audio configuration problem
... but if no joy there, try this alternate technique for swapping out your QuickTime:
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

Audio Configuration problem detected after install

During the download of the new ITunes version I had a major power failure. I went back and completed the download and after the installation I got an error message that ITunes could not be opened due to an audio configuration problem detected. I went to the Apple site and downloaded a new version from scratch and after the install I got the same audio error. Any Suggestions?

Perhaps this Apple KnowledgeBase article will help:
iTunes 7 for Windows: iTunes has detected an audio configuration problem
Hope that helps.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards.

Audio configuration problem in iTunes

I am running iTunes 7.1.1.5 (WinXP). When opening iTunes, I get an error message that there "are problems with your audio configuration." In iTunes support, I followed instructions to remove Quicktime then reinstall as standalone (without iTunes). Same problem persists. I will add that same problem occurred about a month ago, but that time the same steps of removing Quicktime, then reinstalling as standalone corrected the problem. Unfortunately, it recurred.

See if this helps:
iTunes 7 for Windows: iTunes has detected an audio configuration problem
http://docs.info.apple.com/article.html?artnum=304424

Audio Capture problem in Mac OS X 10.7.5 in Mac mini(in Silverlight)

I got a mac mini and upgrade Mac OS X 10.6.x --> 10.7.5.
However do not hearing the audio in Webpage using Silverlight.(10.6. version doing well)
So, I found the solve this problem, that is a audio capture problem.( My device does not supported Stereo audio data).
this is the source in audio capture using Silverlight code.
CaptureSource source = new CaptureSource()
                        AudioCaptureDevice = CaptureDeviceConfiguration.GetDefaultAudioCaptureDevice()
                    try
                        foreach (AudioFormat af in source.AudioCaptureDevice.SupportedFormats)
                            if (af.Channels == 1 && af.BitsPerSample == 16 && af.SamplesPerSecond == 8000)
                                source.AudioCaptureDevice.DesiredFormat = af;
                                break;
af.Channels is always af.Channel == 2(Stereo)
--- the question is
How can I caputure audio channel mono?
If couldn`t, how can I transfered audio capture data stereo to mono?
Please answer the question as soon as possible ^^

Mavericks is a 5.3 GB file, it takes awhile to download based on the speed of your internet account.

Major "BUG" in Imovie 9 - Audio Sync Problem on Export !

Well I'm a hard-core Apple user from day one, but unfortunately today I'm not to proud about the latest version of Imovie 9.
It seems there has been a "MAJOR audio sync problem on export" in Imovie 9, since July 2009. Apple knows about this bug for a long time now, but didn't release any bugfix yet!
Here's what it's all about:
It seems if you use the (custom /manual) speed-adjustments and not the preset slider speeds, you will experience (after exporting your movie) annoying bursts of audio from clips that had been set to mude. The strange thing is that you will only experience this audio-bug after exporting, you will NOT experience it in the project playback mode!
Here's what you can do:
Find ALL the clips in your Project that are Speed Adjusted.
Instead of using a "Custom Speed" percentage, use any of the "Preset Speeds"
Preset Speeds on the Slider = 12.5%, 25%, 50%, 100%, 200%, 400%, 800%
Then, export your project as usual.
No more sync issues.
Really hope That Apple will come up with a real BUGFIX soon.
It's a shame that a major bug in a otherwise GREAT PRODUCT, hasen't been fixed yet!
What's wrong with Apple?...this is not one of their finest hours.
Still A BIG fan from Imovie HD,...I'll chance to Imovie 9 when the bugs are finaly fixed!

This is TERRIBLE! I have spent so much time working on this project, and I really don't want to adjust the speed settings to the preset levels, BECAUSE I need to motion of the video to match certain musical points. I can't re-film my video, and I needed this project done TODAY. I made a music video with some kids at summer camp, and today is the last day- the day we were supposed to all watch it together, and now, I've got NOTHING!!!! (Because I can't export it without all those glitches!)
I am MAJORLY DISAPPOINTED on this one. I've made movies in windows movie maker before, and purposely used imovie, because you know, everything on macs is supposed to be better. Well, I guess I was wrong.

SPDIF optical audio input problem

having got over the audio stutter problem by upgrading to 10.4.5, i discover that there is a part 2 to the audio faults on the last g4 powerbooks.
i've been trying to record from DAT via the spdif input, but after a random amount of time, the apps stop recording with a processor overload error, or worse, something very similar to the looping audio problem previously thought cured.
If i try and record via line in analogue - there is no problem.
I'm not really streesing the CPU - i've been forced to try and use simple recorders like quicktime and boom recorder , trying to keep it simple and reliable at this stage.
any ideas?
Powerbook G4 17" 1.67 DL 512mb Mac OS X (10.4.5)
Powerbook G4 17" 1.67 DL 512 mb Mac OS X (10.4.5)

But when I plug the output of the Radio Shack controller into the audio input of the iMac, it captures only one end (my end) of the conversation.
Where did you previously connect that output, when it works properly?
Is it coming over only on the left or right channel?
You may be able to control the audio input more precisely using the +Audio Midi Setup+ utility (in the Utilities folder).

Premiere CS4 - Audio sync problems, Encoding Problems

Hi,
I've been using Premiere CS3 for encoding 20-25 minute videos to deploy on a Flash Media Streaming server.
Today I upgraded to CS4 and everything that I render to FLV/FV4, H264 or Quicktime format has serious audio sync problems when I use AAC as the audio codec. Unfortunately for me, AAC is the codec that I need to use for the streaming server. The audio is synchronized to begin with, but it gets progressively unsynched as the video progresses.
Has anyone else had this problem? I'm using bitrates of 256 kbps, 512kbps for the video and 24 kbps / 32 kbps for the audio.
Another thing that I've noticed is that many of the options that I used when encoding videos are no longer available!! For instance, I cannot generate hinting tracks for Quicktime, and most of the audio frequencies are gone for Quicktime as well.
What a disappointment:(
-Chris

Seems to be an on going issue with no response from Adobe. Have the same issue with the audio running ahead of the video. (Cool if this was an old Japanese monster video).
Running CS4 PP & AME all updates are current. Nvida Quardro CX (current drivers 4.20.006) used several formats (Elemental h.264 to MPEG-2) same issue.
PC Intel Xeon CPU 3.20GHz 16GB RAM – Prof Win XP x64 Ser Pack 2
Any help from Adobe would be appreciated.

Audio sync problem after scrubbing

I'm trying to piece together some clips from a TV series called Legend of the Seeker. I'm using Premiere CS4 4.0.1, Vista Ultimate 64-bit.
Placing the hour-long video in the Source Editor allows me to play the video fine from beginning to end, but if I start scrubbing through the file, the audio unsyncs itself immediately.
Here's a screenshot of the video in GSpot:
http://img14.imageshack.us/my.php?image=premieresync.jpg
Setting IN and OUT points and then dragging a very small clip into the timeline has the same result.
Any ideas would be very appreciated.

You are actually pretty lucky to just have Audio sync problems, though I do not know why scrubbing would make any difference. With both Xvid and DivX one more often gets no Audio, or no Video.
Agree 100% on the 3rd party conversion, prior to Import into PrPro.
Hunt

M Audio radium 49 problems

Similar Messages

Maybe you are looking for