M & M on a Windows Server?

According to the Zen 7 docs the management and monitoring services can now
be installed on a windows server. I can't get this to work. Is this really
supported?
TIA
Doug Parks

BUMMER....Ok Thanks for the info.
"Ron van Herk" <[email protected]> wrote in message
news:2Bilf.3247$[email protected]..
> The Site Server can be on NetWare only. It's just the management agents
that
> can be installed on a Windows Server
>
> Ron
>
> "Doug Parks" <[email protected]> wrote in message
> news:Joilf.3226$[email protected]..
> > According to the Zen 7 docs the management and monitoring services can
now
> > be installed on a windows server. I can't get this to work. Is this
> > really
> > supported?
> >
> > TIA
> >
> > Doug Parks
> >
> >
>
>

Similar Messages

Installation problem on windows server 2008 r2 datacenter edition 64bit

hi
today, i tried to install the current maxdb 7.8 release on my virtual server with a windows server 2008 r2 datacenter 64bit edition os. at the first installation, i got an error message something with "rte runtime error". at this point, the installation stopped.
because of this error, i tried to uninstall the failed installation. this was not possible, in the uninstaller, i didn't see any components, so i can't uninstall.
so i tried to delete the files manually: the entries in the start menu, and the application's path under "program files"... first, i need to kill a process named "serv.exe", that creates a tcp daemon under port 7200... after killing it, the deletion of the dir in program files was successful.
this is very very weird, now my server is "contaminated" with an uncomplete uninstallation of maxdb...
why maxdb 7.8 has problems on windows server 2008 r2 datacenter 64bit edition???
thanks for feedbacks!
regards, jan

> no, because i canceled this virtual server - another method to solve this problem. (i have really no time for things like that..!)
If you take the time to give exact error messages then someone will be certainly able to help
> on windows server 2003, there are NO problems.
Windows 2003 != Windows 2008 - they use a different kernel, a different security system (UAC) and other features that may prevent a succesfull installation in the first place.
I installed a MaxDB 7.8 just today on Windows 2008 R2 and it worked fine.
Markus

SharePoint Foundation 2013 installed on Windows Server 2012 not sending out email notification

I have a server where i installed SP Foundation 2013 on top of Windows Server 2012. I have configured the SMTP as well as the outgoing SMTP in Central Administration
of SharePoint. When i create an alert on a document library, its did not sent any email notification on the changes made to the document in the document library. So, i created a workflow to send out email using SPD2013. The workflow run, but it cannot sent
out email with error saying that outgoing email is not configured correctly. I have checked with another server which i installed SP foundation 2013 on top of Windows Server 2008 R2 - its sending out email just fine using same configuration and outgoing SMTP.
I need help to resolve this issue or at least the cause of the problem.
Any help is greatly appreciated.

Try below:
http://social.technet.microsoft.com/wiki/contents/articles/13771.troubleshooting-steps-for-sharepoint-alert-email-does-not-go-out.aspx
Go to Central Admin ---->Operations----->outgoing email settings and verify that SMTP server is mentioned correctly
2) Test the connectivity with the SMTP server.
In order to do that follow these steps:
Open cmd
telnet <SMTP server name> 25 ( We connect smtp server to the port 25)
you should see a response like this 220 <servername> Microsoft ESMTP MAIL Service, Version: 6.0.3790.3959 ready at date and time
Beware that different servers will come up with different settings but you will get something
If you dont get anything then there could be 2 possible reasons, either port 25 is blocked or
the smtp server is not responding.
For testing response from your server
For testing response say ehlo to it.
Type :
ehlo <servername>
output:
250 <servername> Hello [IP Address]
Now a test mail can be sent from that SharePoint server.
Now we need to enter the From address of the mail.
Type :
mail from: [email protected]
output:
250 2.1.0 [email protected]….Sender OK
It's time to enter the recepient email address.
Type : rcpt to: [email protected]
output:
250 2.1.5 [email protected]
Now we are left with the data of the email. i.e. subject and body.
Type : data
output:
354 Start mail input; end with <CRLF>.<CRLF>
Type:
subject: this is a test mail
Hi
This is test mail body
I am testing SMTP server.
Hit Enter, then . and then Enter.
output:
250 2.6.0 <<servername>C8wSA00000006@<servername>> Queued mail for delivery
Type: quit
output:
221 2.0.0 <servername> Service closing transmission channe
3) Check alerts are enabled for your web application
verify if the windows timer service is running or not.
Run this stsadm command to check that
Stsadm.exe -o getproperty -url http://SharePoint-web-App-URL -pn alerts-enabled
This should return <Property Exist="Yes" Value="yes" />
If you don’t get this, Enable alerts by:
stsadm.exe -o setproperty -pn alerts-enabled -pv "true" -url http://SharePoint-web-App-URL
If its already enabled, try turn off and turn on it back.
4) Check the Timer job and Properties
Go to
MOSS 2007: Central Administration > Operations > Timer Job Definitions (under Global Configuration)
In SharePoint 2010: Central Administration > Monitoring > Review Job Definitions
Check whether the "Immediate Alerts" job is enabled for your web application. check these properties:
job-immediate-alerts
job-daily-alerts
job-weekly-alerts
stsadm.exe -o getproperty -url "http://Your-SharePoint-web-App-URL" -pn job-immediate-alerts
The expected output is:
<Property Exist="Yes" Value="every 5 minutes between 0 and 59"/>.
If you don’t get this, run the following command to set its value.
stsadm.exe -o setproperty -pn job-immediate-alerts -pv “every 5 minutes between 0 and 59" -url http://Your-SharePoint-web-App-URL
5) Check whether the account is subscribed for alerts and it has a valid email account. This should be the first thing to check if the problem persists for some users not for all.
6) Then check if at all those users have at least read permission for the list. Because the first mail should go out for every user without security validation but the next ones won't be delivered unless the user has at least read
permission.
7) If it is happening for one user, can also try to delete and re add the user in the site.
8) Most importantly , you should try this one.
Run this SQL query to the content db < Select * from Timerlock>
This will give you the name of the server which is locking the content database and since when.
In order to get rid of that lock
Go to that server which is locking the content db and then restart the windows timer service.
within some time it should release the lock from content db, if not then at the most stop the timer job for some time
Once the lock will be released then try to send some alerts
You will surely get the email alert.
I found this is the most probable reason for alert not working most of the time. We should start troubleshooting with above steps before coming to this step for any alert email issue but from step 1 to step 7 are best for new environments or new servers.
If the issue is like this ,alert was working before and suddenly stopped working without any environmental change then above conditions in step 1-7 should be ideally fine.
Even after this if it is not working, then you can try these few more steps too
9) Try re-registering the alert template:
stsadm -o updatealerttemplates -url http://Your-SharePoint-Web-App-URL -f "c:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\XML\alerttemplates.xml" -LCID 1033
10) Try to clear the configuration cache
If this helped you resolve your issue, please mark it Answered

ASA and RADUIS on Windows server 2012

hi i have ASA5505 i want to get the Authentication from Raduis Server using NPS on windows Server 2012 i test the Raduis Server over "Kerio Control VMware Virtual Appliance" its work Perfect for testing my Setting on Raduis but with the ASA5505 i get this message "Error authentication rejected aaa failure"
Running Config
: Saved
ASA Version 9.1(3)
hostname NazcoFW
domain-name default.domain.invalid
enable password XgEKS9WizHnI9IUJ encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd XgEKS9WizHnI9IUJ encrypted
names
interface Ethernet0/0
switchport access vlan 22
interface Ethernet0/1
interface Ethernet0/2
switchport access vlan 12
interface Ethernet0/3
interface Ethernet0/4
shutdown
interface Ethernet0/5
shutdown
interface Ethernet0/6
shutdown
interface Ethernet0/7
switchport access vlan 32
shutdown
interface Vlan1
nameif NAZCO
security-level 100
ddns update hostname OSI
dhcp client update dns server both
ip address 172.16.200.1 255.255.255.0
interface Vlan12
nameif outside4
security-level 0
ip address 172.16.4.254 255.255.255.0
interface Vlan22
nameif Outside20
security-level 0
ip address 172.16.20.254 255.255.255.0
boot system disk0:/asa913-k8.bin
ftp mode passive
dns domain-lookup NAZCO
dns server-group DefaultDNS
name-server 10.1.1.1
name-server 10.1.2.1
domain-name default.domain.invalid
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network HP5220
host 10.10.10.105
object network ak20
host 10.10.10.110
object network hp5520
host 192.168.2.105
object network HP7000
host 192.168.2.106
object network HP5520
host 192.168.2.105
object network ak04
host 10.10.10.110
object network HP400
host 192.168.2.107
object network out04
range 192.168.2.200 192.168.2.220
object network AK04
host 10.10.10.110
object network oooo
subnet 10.10.10.0 255.255.255.0
object network 444
host 10.10.10.110
object network OSITOINT
subnet 10.10.10.0 255.255.255.0
object-group network OSItoOUT04
network-object object out04
access-list outside20_access_in extended permit icmp any4 any4
pager lines 24
logging enable
logging asdm-buffer-size 512
logging trap informational
logging asdm informational
logging host NAZCO 10.10.10.10 17/6161
logging debug-trace
logging permit-hostdown
mtu NAZCO 1500
mtu Outside20 1500
mtu outside4 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-721.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (NAZCO,outside4) source dynamic any interface dns
nat (NAZCO,Outside20) source dynamic any interface dns
route Outside20 0.0.0.0 0.0.0.0 172.16.20.1 1
route outside4 0.0.0.0 0.0.0.0 172.16.4.1 11
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server Keefa-Raduis protocol radius
aaa-server Keefa-Raduis (NAZCO) host 172.16.200.10
key *****
radius-common-pw *****
user-identity default-domain LOCAL
aaa authentication enable console LOCAL
aaa authentication http console LOCAL
aaa authentication serial console LOCAL
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
http server enable
http 0.0.0.0 0.0.0.0 NAZCO
snmp-server host NAZCO 10.10.10.196 community ***** version 2c
no snmp-server location
no snmp-server contact
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown
snmp-server enable traps syslog
snmp-server enable traps ipsec start stop
snmp-server enable traps entity fru-insert
snmp-server enable traps remote-access session-threshold-exceeded
snmp-server enable traps connection-limit-reached
snmp-server enable traps cpu threshold rising
snmp-server enable traps ikev2 start stop
snmp-server enable traps nat packet-discard
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca trustpool policy
crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
308205ec 308204d4 a0030201 0202106e cc7aa5a7 032009b8 cebcf4e9 52d49130
0d06092a 864886f7 0d010105 05003081 ca310b30 09060355 04061302 55533117
30150603 55040a13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
13165665 72695369 676e2054 72757374 204e6574 776f726b 313a3038 06035504
0b133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
20617574 686f7269 7a656420 75736520 6f6e6c79 31453043 06035504 03133c56
65726953 69676e20 436c6173 73203320 5075626c 69632050 72696d61 72792043
65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
30303230 38303030 3030305a 170d3230 30323037 32333539 35395a30 81b5310b
30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
496e632e 311f301d 06035504 0b131656 65726953 69676e20 54727573 74204e65
74776f72 6b313b30 39060355 040b1332 5465726d 73206f66 20757365 20617420
68747470 733a2f2f 7777772e 76657269 7369676e 2e636f6d 2f727061 20286329
3130312f 302d0603 55040313 26566572 69536967 6e20436c 61737320 33205365
63757265 20536572 76657220 4341202d 20473330 82012230 0d06092a 864886f7
0d010101 05000382 010f0030 82010a02 82010100 b187841f c20c45f5 bcab2597
a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
9c688b2e 957b899b 13cae234 34c1f35b f3497b62 83488174 d188786c 0253f9bc
7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
63cd1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8
18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 02030100 01a38201 df308201
db303406 082b0601 05050701 01042830 26302406 082b0601 05050730 01861868
7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1d130101
ff040830 060101ff 02010030 70060355 1d200469 30673065 060b6086 480186f8
45010717 03305630 2806082b 06010505 07020116 1c687474 70733a2f 2f777777
2e766572 69736967 6e2e636f 6d2f6370 73302a06 082b0601 05050702 02301e1a
1c687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
03551d1f 042d302b 3029a027 a0258623 68747470 3a2f2f63 726c2e76 65726973
69676e2e 636f6d2f 70636133 2d67352e 63726c30 0e060355 1d0f0101 ff040403
02010630 6d06082b 06010505 07010c04 61305fa1 5da05b30 59305730 55160969
6d616765 2f676966 3021301f 30070605 2b0e0302 1a04148f e5d31a86 ac8d8e6b
c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
1b311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301d0603
551d0e04 1604140d 445c1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355
1d230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300d0609
2a864886 f70d0101 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80
4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
b2227055 d9203340 3307c265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
6decd018 7d494aca 99c71928 a2bed877 24f78526 866d8705 404167d1 273aeddc
481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
6c2527b9 deb78458 c61f381e a4c4cb66
quit
telnet timeout 5
ssh scopy enable
ssh 172.16.200.0 255.255.255.0 NAZCO
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
management-access NAZCO
dhcp-client update dns server both
dhcpd dns
dhcpd update dns both
dhcpd address 172.16.200.20-172.16.200.89 NAZCO
dhcpd dns 172.16.20.1 172.16.4.1 interface NAZCO
dhcpd lease 1048575 interface NAZCO
dhcpd update dns both interface NAZCO
dhcpd enable NAZCO
threat-detection basic-threat
threat-detection statistics
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
ssl encryption rc4-sha1 aes128-sha1 aes256-sha1 3des-sha1
username admin password bZmVDHuxUzzxS3yz encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
inspect icmp error
class class-default
user-statistics accounting
service-policy global_policy global
prompt hostname context
service call-home
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
hpm topN enable
Cryptochecksum:357b7c6f861e8aa9bb3a3674a789b39b
: end
asdm image disk0:/asdm-721.bin
no asdm history enable

Hi
Looks like the AAA configuration is set for local
aaa authentication enable console LOCAL
aaa authentication http console LOCAL
aaa authentication serial console LOCAL
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
Change it to Radius
aaa-server Keefa-Raduis protocol radius
aaa-server Keefa-Raduis (NAZCO) host 172.16.200.10
key *****
radius-common-pw *****
for example :
aaa authentication telnet console Keefa-Raduis LOCAL
Now when you will do telnet to using Radius credentials, Its Should work, If radius goes down you can use LOCAL username and password as fallback method.
Cheers!
Minakshi(Do rate the helpful post)

I am trying to remote into a Windows Server 2003 from a Windows 7 machine and having issues

I am trying to remote into a Windows Server 2003 from a Windows 7 machine. It says "The terminal server has exceeded the maximum number of allowed connections".
My first stop in trying to solve this problem was here:
[URL="http://www.howtogeek.com/howto/windows/command-line-hack-for-terminal-server-has-exceeded-the-maximum-number-of-allowed-connections/"]howtogeek.com[/URL]
And it says:
[I]
[INDENT]This problem happens because Windows only allows two remote terminal services connections when you are in administrative mode, and you’ve either got two people already on that server, or more likely, you’ve got a disconnected session that still thinks
it is active.
The problem with this error is that you have to actually get on the server console to fix the problem if the server isn’t in a domain. ([B]If you are in a domain, then just open Terminal Services Manager and log off or disconnect the sessions[/B])[/INDENT][/I]
So it seems to suggest that all I have to do really is to run the Terminal Services Manager but I cannot find it.
This web site from mssqltips.com [URL="http://www.mssqltips.com/sqlservertip/1981/remote-desktop-error-terminal-server-has-exceeded-the-maximum-number-of-allowed-connections/"](click here)[/URL] says all I need to do is first execute "mstsc /
admin" from the command line. But, when I do that, I get a message when I try to remote to the server, that says this: "To log on to this remote console session, you must have administrative permissions on this computer".
So, what now? What do you suggest?

Hi Bobby,
Yes, it is by design. By default, Windows Server only accepts two concurrent administrative sessions (Administrative Mode). It means that only two administrators can work on the server at
the same time.
If you would like more concurrent sessions, you need to purchase RDS CALs, install Terminal Services related server roles with proper configurations on the server.
Remote Desktop for Administration (server 2003)
http://technet.microsoft.com/en-us/library/cc785186(v=ws.10).aspx
What Is Terminal Services?
http://technet.microsoft.com/en-us/library/cc782486(v=ws.10).aspx
Terminal Services Configuration
http://technet.microsoft.com/en-us/library/cc787078(v=ws.10).aspx
Purchase client access licenses
http://technet.microsoft.com/en-us/library/3660ac5a-7468-48d3-b7e8-5529de8fb6c5
Thanks.
Jeremy Wu
TechNet Community Support

Unable to open Office files on SharePoint 2010 sites on Windows Server 2008 R2

Setup: Windows SharePoint Server 2010 sp1 on Windows Server 2008 R2 (hosted on VMWare VSphere ESXi 5.1)
Secured using Domain SSL from GlobalSign.
Client OS: Windows 7 Professional 32bit & Windows XP SP3 32 bit
Browsers: IE10, IE9,IE8
Office: Office 2010, Office 2010 sp2 (both 32bit), Office 2007
Problem Description: Only recently, users started having issues with opening Office files (Word, Excel) on SharePoint sites. When you click on an Office file e.g. Word Document, it comes up with the option to select "Ready only" or "Edit"
and choosing either options and re-entering the login credentials results in the
application hanging. If you leave it for a while (about 5 minutes) sometimes the file opens and other times it gives the error "Could not open https://portal.com/XXX/XXX/Document.docx". Even when it opens, it's extremely
sluggish and can't do anything other than end it via Task Manager. Same with excel files.
This happens to all the users all different OS and browsers.
On XP Pro SP3 w/ IE8, when you click on the file, the login prompt keeps popping back up repeatedly and if you click cancel, the file loads up anyway but no way of saving back onto the SharePoint site.
IMPORTANT: One exception is when logged in as a Site Collection Administrator, it
works like a dream bizarrely!!!! Opens, Edits and saves back fine on the SharePoint site.
Have tried following:
1. Repaired Office 2010 Pro; Uninstalled/Re-installed Office 2010 Pro
2. Reset Browser, unticked automatically detect proxy settings.
3. Emptied OfficeOfflineCache on Client
4. Removed WebDAV from the SharePoint server
5. Added Antivirus folder exclusion (We use SEP 11) on the SharePoint Server
Note: PDF files opens fine for all users.
I would immensely appreciate if anybody has got any advice/pointers/suggestions. Desperately out of ideas at the moment.
regards,
Compter Sez No!

Hi,
According to your description, When you try to open a Microsoft Office document from a SharePoint 2010 site in a client application, the document opens slowly and you are prompted to enter your credentials multiple times.
This issue may be because of SharePoint Web Front End (WFE) server(s) has Antivirus software installed and the exceptions are not set correctly.
I recommend to remove the antivirus software or set the correct permissions for the antivirus software to resolve the issue.
To configure the antivirus exceptions, please follow the guidelines in the below articles:
KB943620:
Folders to exclude when you perform a file-level antivirus scan on a server operating system.
KB952167:
Certain folders may have to be excluded from antivirus scanning when you use a file-level antivirus program in SharePoint.
KB943556:
Recommended file and folder exclusions for Microsoft Forefront Client Security or Forefront Endpoint Protection 2010.
Best regards.
Thanks

Error While Creating Windows Server 2008 SP2 32-BIT Virtual Machine

I am facing an error while creating a Virtual Machine on the Cloud. The Error is below:
Error (610)
Virtual Machine Manager was unable to find a value for the required Sysprep parameter ProductKey.
Recommended Action
Add the missing Sysprep parameter either to the answer file or to the operating system configuration, and then try the operation again.
My Template does not have the Product Key defined. The OS is Windows Server 2008 SP2 32-BIT. Is defining Product Key absolutely necessary? I have other Templates for other Operating Systems and they are working fine. Only facing problem
with this.
Any help would be appreciated.

In the SCVMM world a 'template' is composed of the following: a VHD with an OS that has been generalized (sysprep), virtual hardware profile (settings), and an OS profile.
The OS profile is required to have a product key. A MAC activation key at the minimum. But the key is required.
If you deploy a VM from a VHD, the same customization assumptions are not at play. Which is why it succeeds. (there is no template in this case, there is also no requirement that the OS in the VHD be sysprep'd).
SCVMM has rules. And lots of things don't make sense until you begin to understand them and play within them. (I am not saying that the SCVMM rules are a good thing, just saying they exist)
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Windows 7 x64 can't read/install any printer drivers from Windows Server 2003 x64 (AMD64 folder and HP Deskjet 855c)

I read the thread Widows 7 printer
HP deskjet 855c driver about possible installation of HP855c drivers onto Windows 7 x64 from "Windows Server 2003 x64" CD but I didn't have enough luck to succeed with doing it on my laptop. That thread appears to be dead now
as it is marked "Answered", so I'm asking for help here. I have Toshiba Satellite P500 with Windows 7 Home Premium 64-bit (http://i55.tinypic.com/2zgth6v.jpg).
Let me tell you first that I don't have access to Windows Server 2003 x64 or XP Pro 64 CD's. However I did some research online, which eventually forced me to learn about the "file sharing". After extensive search I was able to get the copies
of AMD64 folders from Windows Server 2003 R2 Standard x64 with SP2 and
XP Pro 64. The reason that I went also after XP Pro was because I thought that the extra wording "R2 Standard x64 with SP2" in description of "Windows Server 2003" did not reflect the exact name provided by poster
Alan. I couldn't find just "Windows Server 2003 x64" (does it matter?).
Anyway, I followed first the drill with running "printui /s /t2" and disabling UAC, and then in both cases I was able to locate the
NTPRINT.INF file (http://oi51.tinypic.com/9qwvt2.jpg - this image is from XP Pro AMD64 folder) but each time when I
attempted to install the driver, I got the same message stating:
"The folder you specified doesn't contain a compatible software drive for your device. If the folder contains the driver, make sure it's designed to work with Windows for x64-based systems." (http://oi53.tinypic.com/27yveiw.jpg)
Why aren't there x64 drivers?
During several installation attempts I had the printer connected to or disconnected from my laptop. It didn't make any difference. I must add that for this purpose I had to use different cable than the original one designated only for the
Parallel port in my old desktop with Windows XP. My new laptop with Windows 7 x64 came only with 3 USB ports (plus 1 HDMI and 1 Serial). Because of that situation I bought in advance a new printer cable called “USB to 36-pin Parallel Port Adapter
Cable” (http://www.amazon.com/gp/product/B003A8I75E). I'm not sure, if it will work until I can install the printer.
Besides, nobody talked about this issue yet. I was also playing with the port choices in "Add printer" step; changing from default LPT1 to USB001 with the same negative results.
I don't know what I'm doing wrong. I was very hopeful after reading positive "case closed" notes there.
Can anyone help me here, maybe by making the necessary files available for download? I'm willing to pay for such assistance or make a donation, if necessary. Seriously. Judging by the large number of views of the original
thread, one could assume that there is a potential demand for such service. It would be more human to pay few bucks for a few driver files than $900 for the whole Windows Server 2003 x64 CD, no? Can Microsoft accomodate me/us, please? :)
Andrew*
P.S. I was advised to come for help here from
http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-x64-cant-readinstall-any-printer-drivers/4e7d06e1-33a5-4597-be70-4fdc087a63a7?msgId=9a045994-0d31-4d40-b17d-dba372393ee4

I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.
I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder.
I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
driver' when installing the HP 855c.
I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
message (probably the same one mentioned above).
; NTPRINT.INF (for Windows Server 2003 family)
; List of supported printers, manufacturers
[Version]
Signature="$Windows NT$"
Provider=%MS%
; LayoutFile=layout.inf
ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
Class=Printer
DriverVer=10/01/2002,5.2.3790.4533
[ClassInstall32.NT]
AddReg=printer_class_addreg
[printer_class_addreg]
HKR,,,,%PrinterClassName%
HKR,,Icon,,"-4"
HKR,,Installer32,,"ntprint.dll,ClassInstall32"
HKR,,NoDisplayClass,,1
HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
Good luck

Failed to install windows server 2012 in virtual machine hosted in window 8.1

I installed Hyper-V in windows 8.1, then when I tried to install windows server 2012 R2 or windows server 2008 R2 in virtual machine, I got the following error:
the following is my virtual machine setting:
is there anyone an help to resolve it? thank you very much.

Hi,
Good to hear that you have solved this issue. Thanks for sharing as it would be helpful to anyone who encounters similar issues.
Best regards,
Susie

How to install Windows Server 2012 as a Virtual Machine on Window 7 64 bit machine

Hi All,
I need to install virtual Window Server 2012 on Window 7 machine(8gb ram,64 bit machine).
Please give me the list of required softwares to install. If possible the please give download link as well.
Thanks
mit

Since you're on Windows 7 I'd probably go for using VirtualBox
https://www.virtualbox.org/ to host the virtual machine.
Downloading 2012 depends what you're after really, if you've got TechNet / MSDN then you can download it from there, otherwise you'd need to have a licenced copy. You can download 180 day evaluation versions from the Microsoft website here :
2012 - http://technet.microsoft.com/en-gb/evalcenter/hh670538.aspx
2012 R2 -
http://technet.microsoft.com/en-gb/evalcenter/dn205286.aspx

How to install Windows Server 2008 (dualboot) on a PC with Windows 8.1 already on it?

Hi, I bought a new PC with preinstalled Windows 8. Now I need to install Windows Server 2008. Anyone can advise me how to
do it? It has to be in dual boot, in Virtual Machine the display is way too small

You should check out the Boot-to-VHD capability.
Here is how we do it in a lab environment which we got from a Microsoft lab:
-Verify your computer is running Windows 7 or later.
-Verify you have full administrator rights to your currently installed operating system.
-Verify hard disk encryption or other pre-boot security is turned off.
-Confirm that hardware virtualization technology and memory protection are both enabled in your computer's BIOS setup.
Now we just setup the a VHD with an operating system on it (can even use a downloaded server 180 day trial VHD if you are in a rush). Then go to Disk Management and select Attach VHD and point to the file. Note the drive letter that is assigned to the
mounted VHD.
Run a command prompt as administrator and type: " bcdedit /export BCDBackup.bak " to create an exported backup of your boot loader configuration. Now type bcdboot [drive]:\windows.
Now to test your dual-boot configuration, restart your computer and select the new OS boot option.
An optional last step would be when complete to restore your boot loader by running "bcdedit /import BCDBackup.bak" and delete any VHD files.
A more detailed guide written for Windows 7 but still applies for Windows 8 can be found at:
http://technet.microsoft.com/en-us/video/windows-7-boot-from-vhd.aspx
Hope that helps.

How to install SQL server 2008 express on Windows server 2008 R2 standard OS

Hi,
I have Windows server 2008 R2 Standard edition (64-bit) and trying to install SQL server 2008 express edition since I do not have SQL server 2008. When I install it I am unable to see Management Studio so I am trying to install management studio as well
but still I am facing issue. Please let me know whether SQL server 2008 express edition is compatible with Windows server 2008 R2 Standard. If not then pls let me know the proper steps to install it.
Regds

Hello,
Service Pack 1 for SQL Server 2008 is required to be compatible with Windows Server 2008 R2.
Please download QL Server 2008 Express with SP1 included from the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=25052
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

How to install IE8 on Windows Server 2008 R2 Datacenter?

Hello.
Can anybody tell me, how to install IE8 on 2008 R2 Datacenter?
I've downloaded this http://www.microsoft.com/en-us/download/internet-explorer-8-details.aspx for "Windows Server 2008 64-bit and more..", removed IE11, IE10, IE9 from installed updates, and runned "dism /online /disable-feature
/featurename:Internet-Explorer-Optional-amd64".
And nothing helps. I've got a message "Internet Explorer 8 is not supported on this operating system".

you can't "install" IE8 on WS2008R2, nor on Windows7 - because those OS's shipped with IE8.
IE is an OS component, and so when you "upgrade" or "downgrade" IE, you are affecting an OS component.
What this means is that the "IE8" download you are trying to apply, is actually IE8 for WinXP or maybe WinVista.
You can usually "downgrade" Win7 back to IE8, by uninstalling the newer "upgrade" of IE - this causes the OS to automatically attempt to revert to the prior IE version.
This reversion assumes/requires a healthy OS and component store (CBS), including all the pkgmgr file needed to revert to component.
Sometimes, the component store is damaged, or is missing files.
you may need to check the CBS logfiles, and may need to perform SFC /scannow
You may need to use CheckSUR to repair system health.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

OS Error in starting the OCFS Service on windows server 2008

Hi,
Installing the Oracle 11g R1 CRS on windows server 2008 operating system . It is displaying the folllowing error message
ERROR : OS in Error in starting the OCFS Service
Can any one please tell what could be the issue ..
Thank You

Solved this after some trawling through xml configuration files on the server.
The file C:\Oracle\product\11.1.0\db_1\owb\j2ee\config\http-web-site.xml contains the reference to keystore.jks:
<ssl-config keystore="*%ORACLE_HOME%*/owb/j2ee/config/keystore.jks" keystore-password="->keystoreadmin"/>
changing this to:
<ssl-config keystore="C:\Oracle\product\11.1.0\db_1/owb/j2ee/config/keystore.jks" keystore-password="->keystoreadmin"/>
and the OC4J container starts successfully.
Regards,
-Haakon-

Error in Installing Exchange Server 2013 (w SP1) Mailbox Role on Windows Server 2012 R2

Hi Team,
Need urgent help in resolution of following error:
Environment Details: VMware ESXi 5.5 (vMotion)
Migration from Exchange Server 2007 (SP3 + RU13) to Exchange Server 2013
Exchange Server: Exchange Server 2013 with SP1 (Latest Installation Media)
OS: Windows Server 2012 R2 - Standard (Latest Installation Media)
Exchange 2013 Roles: Seprated (Mailbox and CAS on Different VMs)
Prerequisites: Installed
Error: Installation gives Error at Step 10 during installation of Mailbox Service
Error Details Below:
Error:
The following error was generated when "$error.Clear();
if ([Environment]::OSVersion.Version.Major -ge 6)
$WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe";
$reg= join-path (join-path $env:SystemRoot system32) reg.exe;
$servicecmd = join-path (join-path $env:SystemRoot system32) sc.exe;
if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"}))
if ((get-service wsbexchange).Status -eq "Running")
Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
/f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d
Exchange /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
/f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery /t REG_DWORD /d 1 /f";
Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for Windows Server Backup`"";
Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`"";
" was run: "Process execution failed with exit code 1.".

Resolved ! :)
Root Cause: The user account I was using had all the required privileges for Exchange Installation but was not having access to edit the registry of the server. Enable access to registry edit tools and you are good to go.
As an alternate you can also try installing using Domain Administrator account if in case there is an IT Policy constraint in the former method.
Thanks to all.

Error in installing CE 7.1 SP3 on Windows Server / XP

I am trying to install CE 7.1 on Windows Server 2003 (version 5.2), SP1 but it fails the pre-requisite analysis giving the message:
Windows XP SP2 or higher and Windows Vista are the supported operating systems. The current version is: Version 5.2,
Service pack 1, Product type -Server.
Now if I try to install CE 7.1 in Windows XP SP2, I am not able to install the Enterprise Edition of SQL 2005 software because the Windows XP does not allow that. Only Professional edition of SQL 2005 is allowed in Windows XP SP2.
But the CE 7.1 package downloaded from SAP Marketplace contains the Enterprise edition of SQL only.
So I am not clear on which operating system should CE 7.1 be installed. If Windows XP is the answer, then wiil the Professional edition of SQL 2005 work fine for the CE 7.1 software?
Please give your inputs.
Edited by: Roshan03 on Dec 9, 2009 11:52 AM

Hi,
There is two flavors of CE, server and developer workplace.
You can easily install a developer workplace on XP with maxDB.
You can also install the developer workplace on WS 2003 with SqlServer, the pre-requisite analysis message is not blocking and you can continue your installation. Your CE will work perfectly well.
The last possibility is to install the Server version of CE on WS 2003. You will not have the pre-requisite analysis message.
Regards, Gilles.
Edited by: Gilles Godart on Dec 9, 2009 11:59 AM

M & M on a Windows Server?

Similar Messages

Maybe you are looking for