M.Tech and Research scholar with 2.5 year LabVIEW experiance looking for profile as LabView Developer
I am M.tech Biomedical enginer and working as research scholar with 1 year experiance and having 2.5 years experiance of labview,vision builder and vision assistant.
Looking for the position of labview developer in good organization..
Mail ID:[email protected]
Hello I wanted to bump this thread up.
I fell time has come time to once again embark on a job search quest for me.
What has changed since the opening thread?:
My CLD has expired, but I intend to recertify using the CLD-R and very quickly once again to CLA. ( plan is to do it in march ).
During my last 2 years I've worked predominatnly in LabVIEW on very high speed DAQ with insane data-rates.
Learned how to do proper multi threading in LabVIEW and work with ginormous data -sets in the hundreds od GB,
Learned how to do proper 64-bit labview apps, and use memory efficiently.
Got experience working on Oil and Gas stuff. Gained Team Lead Experience.
What am I looking for:
Software Architect, Team Lead or Software Manager positions.
I'm also trying to get canadian residence, which should take me approx 10 moths to sort out, but if a job offer came sooner this could boost me.
So Canadian offers are of my particuar interest.
US jobs, unfortunately I do not have a work permint in US, which excludes me from 90% of the jobs on this forum, if any employer has the ability to sponsor please contact tme.
I'm an EU citizen and I do browse the EU offers all the time, but if my profile is interesting to you please don't hesitate and contact me and I'll send you my resume.
Regards,
WibJ
Similar Messages
-
I purchased ScanSnap and it came with Adobe Acrobat Professional. It was for a club. I am now leaving the club and transferring the scanSnap back to the club. BUT i can't find my Acrobat Pro disk. What should I do?
Thanks
Ron 6Hi ron6,
You can download Acrobat 9 Pro from: Download Acrobat products | 9, 8 and use the purchased serial number to activate the software.
Regards,
Rave -
hi guys i have 2 ? 1 my daughters iphone is trying to update on my mac cant get it off help please ,,, 2 i have an old apple id and when i try to up date it keeps looking for the password how do i delete this old apple id help
Hi.
I had a similar problem myself. This is what helped me.
I went to the App store app, scrolled to the bottom, logged out of the account, re logged in with my Apple ID. Then went back to app updates. Once I put in my ID password all was fine. -
Looking for education materials of developing C++ application with Eclipse
Hello everyone,
I am looking for education materials of developing C++ application with Eclipse. Could anyone recommend some good education materials?
Thanks in advance,
GeorgeThanks nereidahoxhaj,
So this is funny...
Hi George,
i see from your history that you have never ever
tried to help anybody... anyway i'll answer just to
show you that the people in this forum are different!
Download CTD plugin form eclipse site:
http://www.eclipse.org/cdt/
and then go to another forum...
Addio!Your reply is very helpful. You are really different.
regards,
George -
Can anyone help on integrating Unifier with WebCenter Portal ? We are looking for a solution where we can show Unifier pages within WebCenter Portal application. Is this possible ?
If you simply would have posted here first, there are plenty of people who would have informed you of the current policy to have a data plan active on an account during the entire contract if purchasing a discounted smartphone.
Unfortunately, there are just as many on here who would claim the people informing you about this policy of being Verizon plants spreading disinformation and trying to make people afraid to upgrade via this route.
Yes this is a new policy, one which has been pointed out multiple times in these forums. Good luck, but I doubt you will have an outcome over this which will make you happy.
Verizon is closing as many loopholes to keep unlimited data as they can. -
What's the deal w/ Pages and Merge Fields. I've spent an hour looking for it and poof it's gone. What the ****?
https://discussions.apple.com/message/25419393#25419393
Peter -
I have Itunes set up to sync with my Ipod touch and Ipad. As of today, iTunes has started searching to sync with an iPhone, which I don't have and pops open with an error message stating it cannot locate the iPhone to sync. I have looked in devices and only the iPad and iPod Touch are listed. Any ideas on how to stop iTunes from searching for any iPhone it is never going to find? It is annoying to have it popping up all the time with the error message. Thanks in advance for any suggestions.
You should really read the manual.
"How do you restore from backup? "
Restore. When given the choice, choose to use backup.
"And how can I check to see if the pics and videos are on my computer somewhere first??"
They would only be where you put them. What program did you use to import them? Pics/vids taken with ipod are not part of the sync process at all. You should be importing them just as you would with any digital camera.
If you did not import them, then they are not on your computer. -
When running FB game apps, the image loaded is too large for the FB space. The program looks for a "zoom" setting and does not find it. This was from the error screen. I have not been able to locate where the image zoom is located (found the font adjustment). I am new to FireFox and would like to sort this out please.
Your installed plug in assume Shockwave Flash 10.3, but I thought it was Adobe Flash 10.3. Are they one and the same?
Below is the warning message from the Error ConsoleI'm not sure the CSS warning is relevant to Flash. Maybe adjust your overall zoom level on Facebook manually from the View menu?
View > Zoom
If you have the orange Firefox button, tap the Alt key to display the classic menu bar. -
CLAD with MS in Electronics/Electrical engg looking for better opportunities
Priyanka Chaudhary
ob/4 wardens' residence medical boys hostel campus, near white church colony, Indore(M.P)-452001
[email protected]
OBJECTIVE:
==========
Seeking position as Labview Developer
EDUCATION
==========
Master of Science in Electrical Engineering
University of Kentucky, Lexington, KY.( G.P.A. 3.5/4.0)
May 2010
B.E. Electronics and Communications Engineering
Rajiv Gandhi Technical University, India
First Class with Honors G.P.A. 4.0/4.0
June 2007
SKILL SET
==========
Programming Languages: Labview (2011,2010,8.6),Simulink,VHDL, Verilog , C , C++, VC++, MATLAB C#,HTML, ASP.Net 4.0, Assembly Language
Development and Simulation Tools: Labview, Xilinx ISE, ModelSim, MATLAB, MS office Suite, VS .Net
Hardware: NI cRIOs, NI CDAQ, NI C-form thermocouple ,IEPE and strain gauge modules etc.,8085/8086 Processors, 8051/8951 Microcontrollers
WORK EXPERIENCE
===============
1)Assistant Manager, VE Commercial Vehicles Ltd. (OEM), Pithampur, July 2010-Present
-Certified Labview Associate Developer (CLAD) [Serial Number:100-311-4045; Issue date: Dec 29,2011;Expiration date: Dec 28 2013]
-Part of the software development team in the Vehicle Validation and testing Division
-Developed and deployed software in Labview for Testing Rigs required in the Fatigue and Endurance Labs.
-Attended Labview Core1 & Core2 training and preparing for Certified Labview Associate Developer exam (CLAD).
-Projects include:
--software development for Clutch endurance test using Master/Slave architecture;
--system identification, iteration and drive-file generation from RLD for Cabin testing on Moog Controller;
--Test Sequence generation for suspension leaf spring endurance and Front Axle endurance tests;
--R&D of Stewart’s Platform(Multi-Axis Shaker Table) in Simulink using Pro-E/CAD model and validation of the model parameters for Rig development in Labview.
--Single-handedly designed and deployed endurance test application on FPGA target using Labview 2011 using Modbus as communication protocol between variable frequency drives(ABB) and motors.
-Designed software utility manuals for rig operators.
2) IT consultant, Libsys Consultancy, Chicago, USA ,Sep 2010-March 2011
-Worked as Dot net developer apprentice/consultant for client (Thomson Reuters ) in Minnesotta,USA.
-Worked on Models –View-Controllers architecture to design Web applications.
3)Graduate Research Assistant, University of Kentucky, May 2008 - Aug 2010
Thesis : Spheroid detection in 2D images using Circular Hough Transform
-Collaborated with National Cancer Institute and the dept. of Opthalmology to prepare High Content –High Throughput Screening Assay (3D-ECSA) analysis platform.
-Ran an automated test bench with a motorized camera (VC++, MFC) for the assay analysis and image acquisition.
-Synthesized data stochastically similar to original, to increase the databank.
-Developed algorithm (MATLAB) to detect spheroids in data images using Circular Hough Transform.
-Demonstrated measures to classify identified spheroids according to shape and symmetry.
-Involved extensive application of Image Processing techniques.
4)Graduate Assistant, Graduate Housing Resident Manager, University of Kentucky,Feb 2010- May 2010
Responsibilities include, resolution of conflicts, inspections, attending to resident requests and acting as a bridge between the 100+ residents and housing body.
ACADEMIC PROJECTS
==================
1)Design and implementation of 2 special purpose processors,Spring 2008
-Designed two special purpose processors in VHDL in Xilinx ISE
-These were non-programmable and were designed to execute a repetitive custom logic
-Simulation was done in ModelSim and tested on Xilinx Virtex 5.1 FPGA.
2)Wireless Datacommunication between terminals using Frequency hopped spread spectrum,Spring 2007
-Prepared and etched PCBs for circuit base;
-Soldered HT-12 encoders/decoders, transceivers and PLL ICs to the PCBs to form a FHSS transceiver circuit
-Involved electronics and communication principles.
-Demonstrated the working of the units for duplex communication
PUBLICATIONS
=============
Correlation based swarm trackers for 3-dimensional manifold mesh formation
SPIE April 13,2009. Vol:7340 2009
RELEVANT COURSEWORK
===================
Graduate:
Digital Signal Processing, Deterministic systems, Real-time Embedded systems, VHDL, Antenna Design, Solid state electronics,
Electromagnetic field theory.
Undergraduate:
Mobile Communications, Satellite Communications, Fiber Optics, Microwave Circuits, Data Compression and Encryption, Microprocessors and Microcontrollers, Microelectronics, Digital Logic Design, Electronics
Attachments:
Priyanka_Chaudhary_resume_LABVIEW.pdf 130 KBMessage Edité par salimo le 11-04-2009 04:36 PM
~~~~~~~~~~~~~~~~~~Looking for a LABVIEW JOB (In EUROPE)>~~~~~~~~~~~~~~~~~~
**The Best Way To Predict**The**Future Is To Invent It** -
I am currently recently graduated from the University of Technology in Belfort-Montbeliard (France).
Master’s grade of “Electrical and control systems engineering”.
I am currently looking for a job in automation, control systems and electronic domain (I prefere LabView Developpement)
Salim DARWICHE
1 rue antonin artaud
31320 castanet tolosan
Tel: 0033.6.85485107
Email : [email protected]
Nationalities :
- French
- Lebanese
Date and place of birth:
April 18, 1986
Toulouse,
France
Education
2009
Master in Electrical and Control Systems Engineering
Option Embedded
systems
University of technology of Belfort-Montbliard france
2006 University
Diploma in Industrial and Maintenance Engineering
DUT Degree Equivalent to 3 years of
technical studies
Institute of technology of Saida
Lebanon
Experience
February
July 2009 Galley-Technologies (Neuchatel-Switzerland)
Mission:
Development of
Labview Modules for Pharmaceutics and Robotics
industries
Realization(s):
Communication and data-Analyse Software using
TCP/IP:
- Development of a software (Labview Programming) that would permit data
transfer between many pharmaceutical ovens, in order to analyse all production cycle, and test
the conformity of the final products.
5 Axis robot simulation software:
Concept and development of simulation tool for a robot working cycle
September 2007
February 2008 Valeo VSS (Paris France)
Mission:
Qualification and management of
automobile electronic components
Qualification of specific electronic components
Making sure that all electronics components will be qualified on time before the
Start-of-Project
- Discussion between me, Valeo supplier and Valeo Project Manager in order
to grant Valeo quality standard Specifications or to approve supplier deviations.
Management of electronic qualification documents on Valeo ePLM system.
- Participating to
daily quality reviews meetings and brainstorming in order to apply a PDCA (plan Do Check
Act)
Management of Valeo DSA products under IMDS Base
- Management and
declaration of Valeo Division Systems Access products under IMDS base (international Material
data systems)
- Creating MDS sheets then sending them to Automobile
Constructors.
February June 2006 United-Group Machinery
(Beirut-Lebanon)
Mission:
Renovating a bag-filling
machine
Realization(s):
Mechanical system
- Drawing all parts of
the machine (3D), assembly and motion using Autodesk Inventor.
- Unmount, replacing bad
parts then assembly of the machine.
- Integrating of a weigher machine to the top of the
bag-filling machine.
Control system
-Removing old control system and
integrating a PLC and a control panel
-Programming the PLC (Delta type) with Ladder
diagram.
Knowledge
Languages
French
and Arabic: Native languages.
English: fluent, TOEIC 890/990 Test of English for
International Communication.
Spanish: Intermediate.
Automation
- Labview,
Matlab Simulink
-Programming DSP Controller TMS320LF2407.
-Programming in languages:
assembler, C.
- PLC Programming (Crouzet, Delta, tlmcanique, Moller) -Ladder, List,
Grafcet-
-Controlled systems: Continuous aspect
Electronics
-Programming in
VHDL.
-Programming of PIC 16F87X.
-Simulation (Simplorer, Circuit maker, Electronic
Workbench, Proteus, Kicad).
Electrical
- Machines D.C. current, synchronous,
asynchronous, electrical supply networks.
Various
- CAD: AutoCAD, Autodesk
Inventor, Mastercam, Programming of machines with numerical control CNC (languages Num, Fanuc,
Fagor).
-CAM: Ms-Project (Gantt, Pert, Kanban)
Message Edité par salimo le 11-04-2009 04:35 PM
~~~~~~~~~~~~~~~~~~Looking for a LABVIEW JOB (In EUROPE)>~~~~~~~~~~~~~~~~~~
**The Best Way To Predict**The**Future Is To Invent It**
Attachments:
CV_Salim_Darwiche_S_12_10_09.doc 77 KB
CV_SalimDARWICHE_EN_S.doc 229 KBMessage Edité par salimo le 11-04-2009 04:36 PM
~~~~~~~~~~~~~~~~~~Looking for a LABVIEW JOB (In EUROPE)>~~~~~~~~~~~~~~~~~~
**The Best Way To Predict**The**Future Is To Invent It** -
plse help. my officejet pro 8500 910A was working perfectly with mac os 10.6, but with installation of lion, it no longer works. message i get is 'looking for printer'. i have tried reinstalling the printer many times. also tried the Update software option but my software is fully up to date.
Download and install this: http://support.apple.com/kb/DL907
Restart your Mac.
Re-add the printer in System Prefst > Print & Scan
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Looking for information using labview and measuing Hydrogen\Oxygen duing Electrolysis tia sal2
Greetings All
I'm looking for any information on how to setup labview 7.1 to measure Hydrogen/Oxygen during electrolysis. Can someone send us information on what equipment we would need.
PS we don't have deep pockets we currently have labview 7.1 and we are testing with a usb 6008 currently.
ThanksHi sal2-
In order to measure concentrations of these elements during processing you will first need to select an appropriate transducer. Perhaps another user with more experience in electrolysis processing can suggest the external hardware.
Once your transducer is properly configured you will just need to read the signals into your USB-6008 as voltage signals and scale them in software. A great example of this is found in the NI Example Finder for LabVIEW (Help>>Find Examples) by browsing to Hardware Input and Output>>DAQmx>>Analog Measurements>>Voltage>>Cont Acq & Graph Voltage-IntClk.
Thanks-
Tom W
National Instruments -
I am looking for the photoshop 5.5 plugin to allow me to open my .nef camera files... can anyone help?
Other than upgrading PS, you might want to look into Nikon Capture. I have an older version, so do not know if it's still offered, and if it will handle your version of NEF's, as they change, hence the ARC upgrades for newer Nikon (and others) cameras.
Good luck,
Hunt -
old computer crashed. iphone is looking for old computer so I can't get it to sync with my new computer. Suggestions?
See Recover your iTunes library from your iPod or iOS device.
tt2 -
Product: iPhone 5
itune: 11.2.2.3; ios 7.1.1
iPhone 5 app updated fine from PC, but will not sync with iPhone.
Steps: Fire iTunes from PC, then connect iPhone, did app updates in iTunes, but did not sync with iPhone (the # updates stays the same next to "APP Store").
It worked fine for iPad App updates. I tried connect, disconnect, did not work. I also read some posted comments, but still cannot resolve the problem. Please help. Thanks!Hello there, graced.
The following link from the iPhone Basics provides another way to update an app on your iOS device:
App Store - Learn more about iOS 7 and iPhone - Apple Support
http://support.apple.com/kb/index?page=tidetail&product=iphone&locale=en_US&tag= App%20Store#TI133
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.
Maybe you are looking for
-
So today my iPhone decides to go into recovery mode on me randomly so I plugged it into my Macbook right away, but it wasn't showing up in iTunes so I did a quick internet search as to why that could be. On the Mac support forum I found instructions
-
Duplicates in iTunes folder on Finder?
So, yesterday, I reinstalled the OS because my computer was having problems and running out of space, transferring over nothing other than the iPhoto, iTunes, and a couple of other apps. I used an external drive to hold those files. Then, I moved the
-
Regd Navigation between iViews
Hi, We have two iViews (webdynpro iViews) in a workset. I want to create a section called Alerts(iView) in a different workset. This alert iView is also webdynpro iView. We want to show this Alert iView contents in detailed navigation. We want to hav
-
Error msg " Acct requires CO obj assignment " ?
Hello, I am working on SRM 5.5. , Extended classic scenario ( self-driven procurement) . I am facing a problem , while creating a SC ( in account assignment) . If i create a shopping cart, for a particular material , it gives an error message saying
-
Estimation of incoming data on MI client
Hello All , When user synchronises on MI client to download some application from SAP Web Console , user does not know in advance how muchtime it would take . many times , in 1 synchronization , data is not complete . User has to sync many times bef