M trying to add a printer to my extreme network however i only get the basic airport utility screen when I click on airport utility ??? Am I going crazy

m trying to add a printer to my extreme network however i only get the basic airport utility screen when I click on airport utility ??? Am I going crazy

OS X Mountain Lion: Set up a printer to print wirelessly
OS X: Connecting a Wi-Fi printer to your Wi-Fi network

Similar Messages

When trying to convert a pdf file into a word doc, i only get the graphics but not the text. How do i remedy this?

When trying to convert a pdf file into a word doc I only get graphics but no text. What to do?

Hey hamsa142,
I think you are converting a scanned PDF to word.
You might need to run OCR first to make the text recognizable and then convert it to word.
Regards,
Anubha

I moved my FCP events and projects folder onto my external hard drive and now everything is gone on FCP. When I tried to reload those folders onto FCP nothing happened. I still get the missing files image.

I moved my FCP events and projects folder onto my external hard drive and now everything is gone on FCP. When I tried to reload those folders onto FCP nothing happened. I still get the missing files image. When I try to import the folders manually something pops up that says it is incompatable. It is possible to retrieve everything that was lost?

"When I tried to reload those folders onto FCP nothing happened"
Brownale6 how can u reload folder in to FCP.
As you said folders are moved to external disk but have you checked it should be like this
For Event
external disk>Final Cut Events>your event folder.
For project
external disk>Final Cut Projects>your project folder.

An error occurred while trying to add selected printer

I have a imac osx 10.7.3 and I am trying to reset my printer because my computer says an error occured while trying to add selected printer. When I push the control button and push the add button nothing happens am I doing something wrong.

found out what to do

I'm trying to add a printer to my account, however when I enter the printer code, the website errors

I'm trying to add a printer to my account for the first time. However, when I enter the printer code, the website popup screen errors out and doesn't advance to the next function. Any idea what's going on with this?

Hi Dav_gigem,
When did you print the ePrint info page?
If it is ok with you please print another info page, and as soon as you print it please enter the code in the ePrint center.
The reason i m asking you to do this is because the code expires within 24hrs.
Thanks
Josh.C
Click on the BLUE KUDOS button on the left to say "Thanks"
Although I am an HP employee, I am speaking for myself and not for HP.

Trying to add a printer to my laptop

Im trying to add a printer to my laptop. When I do, it says the the active directory doman is unavailable

Hello anne15, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are running into installation issues. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find your product number. Also, please include which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information and the product number we can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please let me knoe how it goes. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

I got an itunes giftcard for my birthday and when i tried to add it on my balance on my ipod touch it says the code you entered is not recognized as a valid code. but i just got this card brand new for my birthday.

i got an itunes giftcard for my birthday and when i tried to add it on my balance on my ipod touch it says the code you entered is not recognized as a valid code. but i just got this card brand new for my birthday.

Make sure you're using the correct code. For most iTunes cards, the code is under the scratchoff area on the back of the card. For more information, see this support article:
http://support.apple.com/kb/TS1292
If you can't get to work after perusing that page, contact the iTunes Store Support; instructions are at the bottom of that article.
Regards.

Trying to add a WRT610n to my home network. When I try t...

Trying to add a WRT610n to my home network. When I try to connect to the router from my XP desktop with a CAT5 cable it does not see it. Was able to connect from my Vista laptop both with a CAT 5 and wirelessly. Changed the router IP address to 192.168.2.1 as instructed by tech support. Desktop still does not see the router. Connect desktop to Westell wireless modem/router with a CAT 5 - no problem. Also connected the desk top to a regular router no problem..
Got no help from tech support - was told that it's not their problem so it must be a computer hardware problem. If it was a hardware issue with my computer then why didn't I have a problem with the other two routers?
I am sure it is a configuration problem but I can not get any support for Linksys? Any ideas?

Well you need to assign the static DNS to the pc in the range of the new lan ip 192.168.2.1 & you will be able to go online wired & wirelessly.

HT1473 I'm trying to add thousands of songs to my iTunes library at once but the option to add folder doesn't appear in my file menu. Adding these songs one at a time is not an option. Someone pls help!!!

I'm trying to add thousands of songs to my iTunes library at once but the option to add folder doesn't appear in my file menu. Adding these songs one at a time is not an option. Someone pls help!!!

Turn on the menus and it will appear.
Cntrl + B to enable menus.

Anytime I try to print in Firefox a Microsoft KB article that is 1 page, I always only get the first page.

Anytime I print any Microsoft KB article, I only get the first page worth of text. This is very troubling because the articles are typically long, and I only get 1 page. The second page always comes out blank (even though in IE it will print out multiple pages with all the text).
My specific example today is listed in the URL below. This example will only print to the "DIR" command, I don't get the full page printed out.
Anyone else have this problem? Anyone have a resolution? I hate having to hit up IE just to print a single article.
I updated to FF 8.01 just to make sure, and I have tried different printers and even computers, to no avail. Even the print preview has the issue, only the first page worth of text is printed and the second page is always blank (even if there are 3, 4, 5, etc pages of data to be printed).
I have also tried the Firefox Menu -> Print command, and the "on-page" print command. I have seen moderate success with highlighting all the text that I want to print and going to "Print-Selection" but it is ugly.
Any feedback or assistance is greatly appreciated.

'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

Firefox allows me to add some pages as bookmarks and not others. For pages that don't work: when I click the star, it turns blue when I click, then goes back to being empty.

Last night I finally sat down to learn how to use Bookmarks. I had no problem creating and organizing bookmarks, but there are some pages that I cannot bookmark. One, for example, is the Gmail log-in page, which I use multiple times a day. I type in www.gmail.com, which routes me to a longer URL and the log-in page. When I click the star to make this page a bookmark, it won't work. I've also tried using the menu option "Bookmark This Page," which also doesn't work for this website. It's seems to be hit and miss as to when Firefox will allow me to bookmark a page and when it won't. I've had no problem adding many other pages; it just seems that with a handful of them I run into this issue.
I've tried closing Firefox and re-opening, which doesn't help, but that is about the extent of my troubleshooting attempts. This problem has been an issue for me for a couple of years and through several versions of Firefox. (I think I am currently running the most recent version.) It actually led me to believe early on that either Firefox Bookmarks didn't work or I just didn't have the time to figure it out. So since I've been using Firefox I have been repeatedly typing the names of my most frequented sites. I finally took time to sit down with it again last night and have found that Bookmarks will be a huge help. If I could only get ALL of my favorite pages to work...

None of the stuff in " http://kb.mozillazine.org/Locked_or_damaged_places.sqlite " helps. I have tried and tried and I have even wipe the computer clean still didn't help. I got the same problem as he/she has got in the first posted. Can add some web pages but not all the web pages I want.. I should have never updated to 3.6.13... That's when it all started for me, from that version..... Now Version 3.6.14 is out, I was hoping the version 3.6.14 might would fix the problem wrong again....
Funny thing is i can not even Bookmark Firefox.com!!!!!...lol
So any ideas on how to fix it other than the link giving would help.
Thanks.

I am trying to make a pdf of a file and I need to get the file size to be no bigger than 10MB. What is the best way to do this

I am trying to make a pdf of a file and I need to get the file size to be no bigger than 10MB. Even when I save it, the image quality at minimum the file size is 10.9 MB. What is the best way to do this

@Barbara – What purpose is that PDF for? Print? Web?
If web purpose, you could convert CMYK images to sRGB. That would reduce the file size as well.
A final resort to bring down file size is:
1. Print to PostScript
2. Distill to PDF
That would bring file size down even more. About 20%, depending on the images and other contents you are using, compared with the Acrobat Pro method. If you like you could send me a personal message, so we could exchange mail addresses. I could test for you. Just provide the highres PDF without any downsampling and transparency intact. Best provide a PDF/X-4.
I will place the PDF in InDesign, print to PostScript, distill to PDF.
Uwe

If I wish to print Contacts as a list how do I get the list to be alphabetized. All my contacts print but they are not in alpha order.

Sign out

If I wish to print Contacts as a list how do I get the list to be alphabetized. All my contacts print but they are not in alpha order.-cannot find an answer other than use iCloud which did not work.Tried Safari and Firefox.
What to try?

I tried to import a PDF of a line drawing into Photoshop Elements. The thumbnail looks fine, but when imported the file is empty. This used to work in the past. What is wrong and how do I solve this?

I tried to import a PDF of a line drawing into Photoshop Elements. The thumbnail looks fine, but when imported the file is empty. This used to work in the past. What is wrong and how do I solve this?

Hi
The value of the Channel Strip volume etc is not stored within the C Strip setting, as you have discovered.
If you really wanted, you could add a Gain plug to the strip, with it set to give the correct output level with the Fader set to 0
(Or just set the fader manually in MS)
CCT

My Macbook Pro won't print with my HP Photosmart 7515. I get the following message, " Print file was not accepted" Printer does work with our PC??

My Macbook Pro won't print with my HP Photosmart 7515. I get the following message, " Print file was not accepted" Printer does work with our PC?? Checked for software updates and are none. Talked with HP help and they say it's an Apple problem

I noticed that you said you uninstalled the printer, but you didn't mention resetting the print system. Resetting the print system will reset the drivers the Mac has installed and make them work like they should. Give this a try and see if it gets the printer working like it should. The document below will expalin more about doing this.
Basic Printer Troubleshooting Steps for Mac
If that doesn't help, see if you are using the AirPrint driver, or the printers driver. By default 10.8 uses the AirPrint driver if the printer supports it, so I'm betting that's the driver you're using. If it is, try using the driver for the printer itself. To do this, access Print and Scan. Click the + sign to add a new printer. Select the printer from the list. Click the dropdown next to Use and select the 7515's driver. Let me know what happens.
I am a printer tech for HP.

M trying to add a printer to my extreme network however i only get the basic airport utility screen when I click on airport utility ??? Am I going crazy

Similar Messages

Maybe you are looking for