M115 S3094 Popping/Static sound

It seems that the sound is bad within the sound card, because I tried using a headset and it is still staticly, so it's not the laptop's speaker fault. 
I tried updating sound driver, didn't help.
I've read that flashing a new BIOS work, but I got a "0251: System CMOS checksum is bad" after the update so I had to restore to old BIOS.
What else can I do? It is getting really annoying.
Thanks

Satellite M115-S3094 
Is this the driver you used?
   Realtek Audio Driver for Windows XP
I would try the BIOS update again. If a spontaneous power-on password develops, you won't be able to boot at all.
   Incorrect power-on password prompt -- with older BIOS versions
   ACPI Flash BIOS version 1.90 for Satellite M115 (PSMB0U/PSMB3U)
It's safest to make the bootable CD.
-Jerry

Similar Messages

  • Satellite M115-S3094: Error message - Can't create a D3D device

    Hi,
    I accidently deleted a graphics card driver but managed to get it back, but before i deleted it i used to play the game pkr (3d poker) but now when i load it, it comes up with an error saying "Could not initialize client - Can't create a D3D device - -2005530516, -".
    Also all my folders on my desktop don't appear. The only way i can get this up on screen is by pressing the keys ctrl + alt and delete and then typing in desktop.
    All this started to happen when i tried to connect my laptop to the television.
    I am using Windows XP media center. It's a a Toshiba Satellite M115-s3094.
    Can anyone please help as it's driving me mad as i am very close to smashing the laptop in frustration.
    I don't know the driver its using as all it says is unknown. If anyone can help or even give me an idea on how to fix this then i would be very grateful.
    Cheers for your time.

    Hi
    Sounds a little bit like the Direct3D were not enabled in you graphic settings.
    Please start the DirectX using the command dxdiag and enable all 3D settings.
    Furthermore it would be advisable to remove the installed 3D poker game and then to reinstall it again. This should help to reconfigure the game graphic settings which are necessary to run the game properly.
    Good luck

  • Realtek High Definition Audio, static sound PLEASE HELP

    Realtek High Definition Audio
    Realtek Semiconductor Corp.
    6.0.1.5910
    window 7 ultimate x86
    why after using window 7 got static sound ???? I am already updated all my driver........please help.......
    I also already try installed drivers from HP's site and from Realtek's but still same got the same static sound problem don't know wat the problem , the sound like electic pop sound...........

    Hi,
    name321 wrote:
    Realtek High Definition Audio
    Realtek Semiconductor Corp.
    6.0.1.5910
    window 7 ultimate x86
    why after using window 7 got static sound ???? I am already updated all my driver........please help.......
    I also already try installed drivers from HP's site and from Realtek's but still same got the same static sound problem don't know wat the problem , the sound like electic pop sound...........
    There are a few things you can try.
    1) try another outlet in another room (different circuit group) to see if the sound is still present.
    2) If you are using a power protection device between your PC and the outlet and it is old replace it with a new one.
    Even replacing the motherboard generally won't cure this issue as it isquite likely to be related to a problem in the (earthing) grounding and wiring in your home.
    please post your results her in our tread.
    regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Need drivers for Satellite M115-s3094

    Hi,
    I have a Satellite M115-s3094, I had problems with my OS which was Windows XP MCE but I could not fix it. So I got fed up and loaded in windows XP Professional, but a lot of my drivers have gone.
    The drivers I require are for Ethernet controller, network controller, PCI device, flash memory, SM bus controller, USB controller, video controller....plus I have no sound. It is an Intel centrino duo...as you can see I am missing a lot of drivers.
    Could anyone tell me how can I find out what kind of drivers I need and where do I get them from? Would Win XP SP2 installation help to install any of these drivers?
    Any help at all would be very much appreciated...
    Thanks to all..

    I have the same problem. I just need the drivers for the Ethernet controller and PCI device. I assume that the PCI device is the wireless card.
    I have tried all of the drivers on the Toshiba website, but none seem to work.
    Please help us out.

  • Help!! Static sound and Lock ups

    I recently updated to the newest Ipod Mini version software 1.4. and when i play the songs on my ipod i get static sounding sounds and when i look at the display timer, it looks like the ipod i slowing down.
    Also i'm getting lockups when i'm browsing.
    Ipod service told me to restore the ipod, and i have 3 times, 1 to the factory software version, and twice to the newer version. It didn't help, as i'm still hearing static sounds, and I've switched headphones and headphone jacks, and it still doesn't help.

    the exact same thing happened to me. Mine is an original mini which needless to say is out of warranty, so I need an answer that is not "replace the hardware". Is there a way to restore it to a previous version of the software?
    mini   Windows XP  
      Windows XP  

  • How do i fix the static sounds on my hp pavilion g4-1125dx notebook pc

    I have static sounds coming out of my speakers and the laptop is still new i bought it last year in August at bestbuy. I was wondering if i can fix the problem or do i need to buy another laptop?

    I am locked out of the BIOS on my HP Pavilion dv9810us Notebook PC.
    It is asking me to enter a password when I try to enter the BIOS to change the settings for the WiFI in order to "un-disable" the WLAN. There is also a second place that is asking me to enter a value for the "T Frequency", whatever that is..., it is a numeric value I believe.
    Presently my WLAN is DISABLED. I would like to fix that so it is enabled.
    Thanks for your time. I will be waiting on your reply.
    jeff

  • In my first iPhone 5, the speaker didn't work and people could not hear me on Speaker phone when I used it. When I used the video recording it did not record sound at all only a hissing/static sound, no voice.

    In my first iPhone 5, the speaker didn't work and people could not hear me on Speaker phone when I used it. When I used the video recording it did not record sound at all only a hissing/static sound, no voice. I wished for a software fix. I did a hard reset, nothing. I did a full restore to factory settings not putting my backup on and the problem persisted.
    i have been provided with this info
    You can find troubleshooting tips, how-to articles, and moderated
    > > discussion forums on our support website:
    > >
    > > www.apple.com/support
    > >
    > > iPhone: Basic troubleshooting
    > > http://support.apple.com/kb/HT1737
    > >
    I did every step in the link that i have been provided with (thank you), but I’m
    still experiencing the same issue. My experience with Apple has been
    excellent and this has been the first time I have experienced something
    like this with an Apple product. I hope we can find a quick solution.
    In order to get the iPhone 5 as soon as it launched (being a major fan of
    Apple products!), I purchased my iPhone 5 from the UK through a friend of
    mine who lives there.
    My question is: can I have the faulty device replaced within Saudi by one
    of the official resellers here (we have 3: STC, Mobily and Zain)? I want to
    avoid the disruption, complication and expense of sending it back to the
    UK.
    Could you advise whether this is possible or not, and if not how should I
    go about having the device replaced?
    Thank you in advance for your cooperation.

    Nice try! Take a hike.

  • M115-S3094 Restore without DVD Drive.

    Hello,
    I have a M115-S3094 laptop and the DVD Drive does not read disc. It does not show to have any problems with the drive in Device Manager. I have tried everything I can find to correct the problem if it is a software issue (Microsoft FIx-It, Reinstall Driver, Update driver, Restore Point, etc.) but no luck. My last resort is to completely restore the computer to factory condition because the computer is in need of restoring anyway. I have the factory restore disc but the problem is the DVD Drive will not read it. I have tried to copy the disk to an external hard drive and run the restore from it but it acts like it will only use the DVD drive for restore. I have also tried all the boot from restore partition (Hold 0 zero then start button until it beeps, Hold F8 at Toshiba start screen) but that does not work either.
    Can anyone help me on how I can do a restore on it without using the DVD Drive? I am hoping it will start working after doing a restore but even if it does not that's no big deal. I know the computer is getting old and worn out so if I have to do without the DVD drive that's OK. I just need to be able to do a system restore for the performance of the laptop.
    Thanks for any help!

    Cornelius, thanks for the hint. It works for me too
    During my first attempt I did a mistake. When I read your post I thought my mistake was related to how I used the hardware at my disposal.
    In fact I used a PBG4 as a FW-TDM and an intel iMac Alu as a machine to install the OS. That led to the result I described in my previous posts.
    Tiger 10.4 was the media installation DVD.
    I did the test again. This time I used the iMac as FW-TDM and the PBG4 as the destination.
    The Tiger DVD did show up on PBG4 and I could boot from the FW-TDM DVD.
    Unfortunately after a couple of minutes the PBG4 hanged.
    At that very moment I realized I did a second mistake.
    I was using Tiger 10.4 on a machine that was shipped with Tiger 10.4.2.
    And also the second test was faulty, because the iMac shipped with Tiger 10.4.10.
    Moreover the first release of Tiger being able to run on an intel processor was 10.4.6.
    So, for the final test I used Leopard server 10.5.4 and all went as expected.

  • I just purchased a 6  and there is a static sound coming out of the speaker when it is idle. I have the sound on low and turned off and it still makes the static sound.

    I just purchased a 128 Gig iPhone 6+. When I have the sound off and volume as low as possible, I get a static sound coming out of the speakers. It is distracting and annoying when I am in meetings, etc. Does anyone know what to do? Thanks in advance.

    Couple of things you can try but it looks like you may have to take it in
    1. Settings --> Cellular --> Change "Enable LTE" to just "Data" if available
    2. Toggle your ringer off and on
    3. Settings --> General --> Accessibility --> Toggle Noise reduction off and on
    If none of the above works - consider taking it to Apple
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support

  • Why do I get static sound when I use a headset splitter iwith my macbook air 13"?

    Why do I get a static sound when I use a headset splittter with my macbook air? The headphone works perfectly but when I put the mic in the splitter, the sound gets a little bit static. Any advice will be greatly appreciated.
    Thank you!
    Cheers,
    francismba

    I suggest an appointment at an Apple store genius bar for a free evaluation.
    Perhaps an Apple Hardware Test may provide a clue:
    https://support.apple.com/en-us/HT201257
    Note that an error free AHT is not definitive.
    Ciao.

  • Mac mini (MB463LL/A) giving static sound

    Hi,
    I have this mac mini - MB463LL/A - and it has worked perfectly well without any issues all this well. But of late it started giving a static sound (don't know how to explain it, but it sounds like a sound from radio transmission or FM). It's continuous and constant - doesn't matter what the volume is. I have tried removing my speakers and tried with my headphones but I have the same issue there - so it seems like an issue with the hardware. Any ideas on how can I figure out what could be wrong and what should I do to get it fixed. Appreciate your help.
    Thanks, Kalyan

    No external hard drive is connected, but I have a usb drive connected that's needed for my wireless keyboard to work on mac mini. No grounded outlets around, but it sits under by HDTV and the only change in the recent past around the set up has been my new Airport Extreme wireless router. Earlier I used to have Airport Express and bought this one recently - if that's of any help.
    Thanks for your help

  • Toshiba Power Saver fatal error 0x51A on Satellite M115-S3094

    Hello,
    By the subject, the problem is there. Unfortunately, my computer which is the Toshiba M115-S3094, just recently had a Fatal Error with the Toshiba Power Saver program like 3 days ago. The Toshiba Power Saver not only does not want to work, but it no longer even shows on the taskbar.First, I went to the Power Properties to restore the proram, but to no avail.
    Then, I tried uninstalling and subsequently re-installing the program and it still gave me the same problem with the Error: The program will be terminated. Fatal Error 0x51A. So right now, my laptop is not running on the Toshiba Power Scheme but on the common Windows scheme, like Presentation or Portable Laptop.
    So I need help to restore the Toshiba Power Saver. I run the Toshiba M115-S3094 with Windows Media Center Edition.

    Hi
    The Satellite M115 seems to be a Toshiba US notebook because of the 5 at the end of the number.
    In this case you should use the Toshiba power saver from the Toshiba US site. Did you???
    Maybe you have used the right Power saver utility, so possibly some registry or any system files keys are damage in such case the new OS installation from the Toshiba recovery CD would be advisable.

  • Anyone else having problems with the new Mac Mavericks update? I get static sound at random times now?

    Macbook 2009 does static sound on google chrome and so does my mac desktop. This is all started under Mavericks 10.9.2 for me.

    Nevermind I fixed it. Atleast I think I did, I just set my audio to 24-bit and 9600khz or whatever its called and it sounds clear now. At least I hope that fixed the problem.

  • Static sounds on my laptop

    I hear static sounds when i play music on my laptop (mp3) or watch video on my laptop (mp4) or on youtube online.  I first noticed it a long time ago and it was sporadic. but now it is continues for 3 days.  I hear it when i have my headset plugged in (it's a USB headset.. so i plug it in via the USB port). some times at the start i don't hear the static but after a few seconds/minutes it comes back.  I unplugged the headset and i still hear the static via the laptop's speakers.  I have tried plugging in regular ear phones, I hear the static but not as bad as the other headset and speakers.
    model nameTELLITE A200-10x
    model number: PSAECE-003003AR
    Thanks

    That doesn't appear to be a US model, and this is the forums for Toshiba USA. You may want to contact Toshiba in your region. If it's a European model, you could check the Toshiba Europe forums.
    - Peter

  • Get static sounds on CD after burning CD of iTunes purchased music

    I am able to burn CDs (finally...) after lots of trouble with burns. BUT, now the CDs have the music very faint in the background with lots of static sounds over top. Obviously, it is not "listenable".
    Please give me suggestions of what to try. I had bought more iTunes music thinking that I was going to be able to burn CDs. Help!
    IBM Thinkpad   Windows XP   iTunes version 7.1.1.5

    can you post your DVD/CD diagnostics for us? in iTunes, go "help > run diagnostics", select DVD/CD diagnostics, and paste the results into a reply.
    also, what particular Family of ThinkPad do you have? the iTunes diagnostics will return the Type and Model of ThinkPad ... but i also need to know the Family in order to check for downloads at Lenovo:
    Lenovo Downloads and drivers

Maybe you are looking for