M1212nf fails to initialize after firmware update

Hello,
I have the same problem. The printer keeps re-initializing. Please note that this only happens when we connect it to the ethernet cable. We have replaced cables, switches already, and other devices have no issues on this connection.
Any help would be appreciated

Hi Yeronimo,
Welcome to the HP Support Forums! I understand your HP Laserjet M1212nf MFP fails to initialize, this happens when you plug in the ethernet.
I have sent a Private message on the Forums. Please go to your Userpage to the right of your Username you will see you inbox.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

Satellite A660 - Camera device failed to initialize after BIOS update

I bought a Satellite A660 PSAW3A-07P00R last December. Yesterday I updated to BIOS version 1.9 (did not record what version before the update). Running Windows 7 Home Premium.
After the update, I got this message when I want to use the built-in webcam. The message is "Camera device failed to initialize. Either the device is in use by another application, or it is not recognized by the system." I have tried to open the device manager but cannot find any image or camera device there. I have also download the webcam application version 1.1.1.15 from Toshiba site but it does not install.
Is it any way to revert the BIOS back to the old version? Can Toshiba look at this problem for BIOS version 1.9? Has any one come across with this and finally fix it? Your suggestion will be greatly appreciated.
Regards,
Will

Hi
Only the ASP can revert the BIOS to early version because they could reflash the BIOS using the BIOS DOS-rational BIOS.
But the point is that if you are using the right BIOS, then the webcam should work properly in connection with the new update.
So I agree with Xardas. You should set the BIOS to default settings and should save the changes before you would leave the BIOS.
Then uninstall the webcam software and disable also some background processes which could lock the webcam. This can be done in msconfig.
I would also recommend cleaning the registry using the CCLeaner who knows whats is going wrong with the OS registry so CCleaner helps you to clean the registry entries.
After several reboots, you could try to install the webcam software once again.
Good luck

Acer aspire 5560g Failing to boot after Firmware update

Hey guys, So i recently upgraded my Aspire 5560g to Windows 8.1. I liked it but it seemed to have lost my drivers in the process (my track pad scrolling didnt work and my Dolby audio origram was gone). I went to for the drivers and decided to start with a firmware upgrade (9545 for hard disk performance). After the computer rebooted, I entered the dreaded Windows 8.1 boot loop. It would say "Your PC ran into problems..." with the bluescreen, then turn off. Then it would attempt the Automatic repair, and fail again, then restart the cycle. I wasn't able to even get into my BIOS until I cleared my CMOS, now at least I can get into BIOS. I created a bootable USB for Windows in hopes I could do a clean install, but even when trying to boot from a USB I get the blue Windows 8 screen, "Your PC ran into problems..."
Is there a way I can undo the firmware update, it seems like the culprit, doesn't it? Any help appreciated. Thanks EDIT: I've read that the Windows boot loop may be caused by outdated drivers. Think this could be the problem after I did the firmware update? How can I install the drivers without being able to boot into Windows? Thanks

Okay, I tried each stick at a time in both slots with the same results. Windows blue screened on both the HDD and the bootable USB. Isn't it too much of a coincidence that it started acting up after the firmware update?
To be clear, it was a firmware update for the BIOS. The page is here for the Aspire 5560G: http://us.acer.com/ac/en/US/content/drivers I am open to more suggestions, I'd really love to get this working again after dropping the $ on Windows 8

Data recovery after firmware update

Hi guys,
does anyone know it it is possible to recover data after firmware update in N8? some data are preserved (videos) and some are lost (photos).
thx.

if you didn't backup them, there is no way to recover them
Greece Nokia X6 RM-559 v40.0.002

3014 error i can't restore ipad after firmware update attempt

3014 error i can't restore ipad after firmware update attempt

See this thread with the same question.
https://discussions.apple.com/thread/5045573?tstart=0

After firmware update to V2.0.03, the web UI dos not look right. (WRT160 V2)

Hi
After firmware update from V2.0.01 to V2.0.03, the web UI dos not look right.
I can't see menus, just version number and the basic setup page.
Router Linksys WRT160 v2.
Allan

Hi
Thanks for the reply.
I't works ok now.
Thanks again.
Allan

Restoring after firmware update - Ways :)

Hi All,
Nowadays we are receiving quite a few complaints that customers are unable to restore the application after updating their firmware. I would like all to discuss to come up with some ways to restore their applications after firmware update.
Before updating firmware
Customer can backup his phone using Nokia PC Suite's Content Copier application.
He can store his Contacts and Messages using Nokia Communication Centre as .csv file or .txt file.
For his Contacts he can sync with pc suite supported sync applications.
Messages he can store in Memory card and he can make a backup of memory card in PC.
If he is using Nokia PC Suite for his Multimedia items he can use Image Store if he is using Nokia PC Suite or Nokia Photos if he is using Nokia OVI Suite.
For Music he can use Nokia Music Manager or Nokia Music.
Once after updating his firmware, if he is unable to restore he can get those from above said applications.
If his calendar entries are not restored(as in case of some of Nokia e 71s and Nokia N 95/95 8 GBs), for God's sake if he has got one more similar device(or device having switch application on phone), he can restore the backup file to another phone having switch application, then he can transfer his data (Contacts, Calenders etc ) to his original phone
Dear Forum members, if you have got any other work around please let me know regarding the same, which will help our customers

Hi,
If you have issue in Nokia PC Suites, [subject to your phone's compatibility with Nokia OVI Suite 2.0.0.10 ],
you can install Nokia OVI Suite 2.0.0.10 and check if you can take backup and restore it later.
Also i would suggest to use USB for taking backup, since it will be faster than Bluetooth. Also you can select one category at one time(say backup contacts alone, then Calendar, then messages etc and so on ....)
Its better to skip memory card backup while backup-ing other Phone data for faster backup. Memory card backup can be done separtely(since it wont be affetcted while updating firmware, users can safely remove memory card while updating firmware)
Nowadays though recent phones has got UDP(User Data Prevention i.e., even if you update your phone's firmware, your data wont get erased ), still it is recommended to backup your phone data.
Hope this could help
I welcome our experts to add more details related to this topic.

Problems after firmware update 52.0.007

Hi,
I got my phone back after the shop fixed a problem and updated the firmware to the latest version 52.0.007.
But now I have following problems:
I can't get the calendar anymore to show up on the homescreen, even after checking the checkbox to do so
The Radio app. is gone
Does anyone has a solution for this?
Iwan

It may sound crazy but sometimes you need to "hard reset" device after firmware update (beware all data erased) by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by yourself). Sometimes UDP = User Data Prersevation feature of 5800XM can carry over corrupt entries when updating.
Happy to have helped forum with a Support Ratio = 42.5

My keyboard failed to function after software updates

what should i do..my keyboard failed to function after software updates. i'm using virtual keyboard now.

It would help us to know which comp model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
This will help in providing you with the proper and/or correct solutions.

Ovi Maps 3 don´t start after firmware update (6220...

Hello!
a few days ago I installed ovi maps 3 on my nokia 6220c and it works well. Later I updated the firmware from version 03.06 to 05.15.
After firmware update ovi maps don´t start-> "Cannot open application. Install latest version from nokia.com/maps."
But Nokia Map Updater says, there are no updates for my maps.
What´s wrong?
Can I reinstall Ovi Maps 3? Or is it possible to install Ovi Maps 3 new?
thanks

Hello!
The Map Updater said: "there is no update for your phone" ...because maps 3 is already installed.
But in the meantime I have found a solution!!
I downloaded maps 2.0 from the German nokia page and installed it. Later I started Map Updater and could update to Maps 3 and now it works!!!
I think the problem was: I first updated to Maps 3 and later updated the firmware. There was any older version of fixes included in the firmware update, so Maps 3 was damaged...
thanks
sorry for my bad English

M5035MFP displays Permanent Storage Write Failed after firmware update to 48.301.7

After updating the firmware to 48.301.7, I have two M5035MFP machines that are displaying "68 Permanent Storage Write Failed" error messages. The users can press Continue and printing will proceed normally for another 10-50 pages when the message will appear again. The NVRAM and HDD have been reset/intiliased and they have been powered off/on several times.
This is also occurring on two other different models (6040MFP/9040MFP) which also started showing up after a firmware update about the same time.
Could this be a failed update? How would I go about downgrading to a previous firmware version?

Hi Rwelper,
I want to share with you this solution:
Please try first to reseat the Formatter/HDD and the memory DIMM and install the correcly then try:
First it is not adviced to downgrade the firmware at this step, you can try a cold reset and upgrade firmware again.
here, you need to remove the existent Firmware file on your PC and try to download it again from the HP Website, thus you can instaltly disable the firewalls and the antivirus and do this action.
NOTE: You can try a new upgrade firmware before you proceed with the Cold reset* of the printer.
Cold reset (Format disk also can be performed if this don't work): You can check the printer's manual to know how to perform it.
Please try an NVRAM init or Super NVRAM Init if this don't give a solution.
All these manipulations you can find in the printer's manual
Please note also that all these manipulations will delete all the current printer's configuration if it going to be working fine, so you will need to upgrade firmware and set your printer up again.
==> There is a need to delete files on the HDD / data on the DIMM, unplug and restart the printer.
The final solution is to replace the Formatter then the HDD if all these solutions don't bring a result.
Soudani
I work for HP
I hope this solution respond to what you need
You can post a like if you like this answer

Lync 2010 Polycom CX600 phones fail to sign-in after firmware update

We're running the latest version of Lync2010 in our environment of approximately 1,500 Polycom CX600 phones across 5 Standard edition sites. After rolling out the latest firmware update 4.0.7577.4444 this weekend about 10% of the phones do not come back
online as the user they were previously signed as.The firmware was approved on a Friday evening and Monday morning we were still experiencing the issue.
The phone is stuck in the following error message:
"Sign-in Error
Cannot sign in. Please verify your sign-in address domain\username, and password and try again."
The phone did update to the latest version of firmware but is stuck in "limbo". Doing a traffic dump on the port it's connected to did not reveal anything as the phone is not attempting to communicate with any servers. Only a power
cycle (unplugging POE LAN port) makes the phone sign back in. Just to clarify, after the power cycle the phone signs back in on its own as it seems that it still stored the user's sign in information.
We connect to the voice network via LLDP and we have Alcatel-Lucent 6250 switches that these phones connect to. We also have the DHCP options for the phones to find our voice network for areas that do not have LLDP capable switches.
Just to recap, about 150 phones experienced this issue across all sites and we cannot narrow it down to anything specific about the environment. Performing a power cycle fixes this issue but it is extremely annoying.
Any suggestions?

Check the similar thread at
http://social.technet.microsoft.com/Forums/en-US/771ab6d9-908f-4545-b94f-ef51ab0cca60/polycom-cx600-cant-sign-in-after-firmware-upgrade?forum=lyncvoice
Try to move back to the previous version or you may need to reset each phone manually.
Lisa Zheng
TechNet Community Support

24" iMac freezes after failed 1.4 EFI Firmware update

After scouring the internets I'm hoping you guys could help me.
I was having trouble with boot camp waking from sleep which was supposedly cured by installing the 1.4 EFI Firmware update. While I was installing the firmware upgrade the computer crashed... when it rebooted it took (and continues to take) about 10minutes to boot. Aside from random freezing (more frequent under heavy use), my firewire ports are dead.
I've tried re-installing the firmware but the it say this computer does not need this update.
I've also tried everything outlined in the article: [URL="http://reviews.cnet.com/8301-13727_7-10329023-263.html"]Can't install EFI Firmware Update? Check partition scheme; disconnect peripherals[/URL]
"So the procedure would be: Use Disk Utility to Get Info on your internal drive (the whole thing, not just a partition of it) and thus check the partitioning scheme of your internal drive. If it isn't GUID, then you could clone to an external drive, boot from the external drive or from your installer DVD, repartition the internal drive as GUID, clone back from the external drive to the internal drive, boot up from the internal drive, and perform the firmware update."
I'm at a loss... any ideas has anyone else had this problem?
Computer Specs:
OSX 10.6.2
2.16 Core 2 Duo
2GB ram
Message was edited by: karinaelise8

Please give more information , what version of windows are you try to use via boot camp?.
(in the windows installation process the Mac Os Partition will be there if you put the windows in the wrong partition automatically you are formatting and installing windows on the Mac Os partition.
Hold "Option" for 7 seconds as you hit the power button .
If everything is correct you can choose between Mac or Windows OS for the start up, select the mac OS
If everything is good still you can use your MAC OS normally till you get a fix .
When booting in windows is normally to the mac not recognize the firewire ports, and depending of the version of the windows in your iMac takes about 5 minutes or more for the Boot .
Please note Not all the "intel macs" are compatible with windows 7 ....
Please give more information , but is look like your firmware is OK , (already you try to re-install it)
Take care with disk utility operation, if you can back up your data and reinstall everything again it may help . (a external hard drive and Time machine can help you a lot) .
If you are near by a Apple store , the genius bar guys can give you more details and the proper help ..you can bring the iMac there .

Need to do a clean install after firmware update

i have to reinstall os x after the firmware update.
it wont boot up just sticks on the grey logo and sinny thing.... grrrr
will it be ok just to archive and install just leopard instead of tiger, then disc 2(the apps) then leopard??

After installing the recent keyboard firmware update, my iMac G5 refused to boot past the grey apple screen, too. Got the spinning paddle, but multiple hard shutdowns and restarts failed to get it past that point.
I ended up booting the Leopard Install DVD and tried to reboot into my backup, a Superduper clone of the drive. Wouldn't do it -- got the same result.
Used Disk Utility (on the Leopard DVD) to repair the disk/permissions. The only significant repair was this:
permissions differ on "private/var/log/secure.log," should be -rw-------, they are -rw-r-----.
Now, I don't know what that means, but maybe it's relevant.
I rebooted -- and still was unable to get past the grey screen. I tried repairing permissions a second time (and nothing unusual came up) and it still failed to fix the startup problem.
Ultimately, I was forced to do an archive and install of Leopard, which then allowed me to boot successfully.
Really disappointing -- this is the kind of thing I expect Windows users to have to deal with, not us.

Overheating problem after firmware update

Hi,
A friend of mine noticed a CPU temperature increase in between 10 and 15 per cent, after the MacBook EFI Firmware Update 1.1. Has anyone else noticed a similar behavior? Any ideas or suggestions?
Thanks in advance,
Gonzalo

Originally Posted by ketter
HP DL380 G7
OES 11 SP1 / SLES 11 SP2
patched up to March 29, 2013
HP LTO-5 Ultrium 3000 tape drive
Arkeia backup software
Everything was running fine. I updated the server firmware using the
HP Proliant Service Pack on Apr 10, 2013 and haven't been able to get
a good backup since. Arkeia support says problem with the hardware.
But testing with the HP diagnostics says the hardware is fine. I
checked with HP support and they agree that the hardware is fine but
there are some communication issues. They recommended that I upgrade
the driver. They sent me here:
HP Smart Array P212 Controller*-* * RECOMMENDED * HP ProLiant Smart Array Controller (x86/AMD32) Driver for SUSE LINUX Enterprise Server 11 (x86) - HP Business Support Center
I attempted to install that, but it failed due to dependencies. So
before I go any further and risk messing something up. Does anyone
have suggestions for this? If I do need to update the driver, is
there another way I am supposed to do it vs using the driver from the
HP website? Or how do I deal with the dependency issues...the only
patching I have done with SLES so far is through the channel.
Ken
may i ask what kind of dependency issues you're facing? i've installed the SP2 (kernel 3.0.x) based package last weekend without any issues on a default kernel. are you sure that you've grabbed the rpm matching your kernel version?

M1212nf fails to initialize after firmware update

Similar Messages

Maybe you are looking for