M125 synch to Win7 problem

Trying to USB synch my old m125 with my new Win7 Pro (32 bit) machine at work. Always worked fine on prior XP machine. Per Palm's suggestion, I installed Palm Desktop v. 6.2.2 and the installation went smooth. HotSynch appears to "work" normally, but data on my m125 isn't appearing in Palm Desktop. User Name is correct (I only ever had one) on both m125 and HotSynch Manager. Any suggestions would be greatly appreciated. Thanks in advance.
Post relates to: Palm m125
This question was solved.
View Solution.

Just found the answer by searching the forum (I know, should've begun there). For those with 32-bit Win7, just download the free app named PalmHotSynchSetup here: http://www.pimlicosoftware.com/ (bottom of page). I did that, selected the option to load legacy databases when promted, and then ran HotSynch, and viola! all data from my handheld appeared in the Palm Desktop. Took all of 2 minutes. Awesome, now I can go on using my ancient m125.

Similar Messages

Dma2200 win7 problems

my hard wired network works fine with vista media center connecting to the extender and also on another win7 pc connecting but my main pc connects for 1 second then on the extender the screen goes black (sounds can be heard) then after a few minutes disconnects, has anyone else had this problem please?
Solved!
Go to Solution.

Hi,
Well if the other PC's running on Windows 7 is working with the DMA2200 then we can say that its the configuration on that single pc thats causing a problem. I think you already know this but most of the troubleshooting steps actually for extenders are mostly on the PC as long as your extender(hardware) is connecting to your network and can be pinged, all the other troubleshooting steps are on the software side/settings on the MediaCenter PC. The "EventViewer" tool on windows is the best way to find errors and find solutions when setting up an extender.
Launch Windows Vista EventViewer thru ...
Start > Search > type "EventViewer"
or
Start > Control Panel > System and Maintenance > Administrative Tools > EventViewer
On the EventViewer window, select "Applications and Services Log" then "Media Center", you can then use the link below to find out what is causing the problem.
MediaCenter Error Codes and Solutions
I hope this helps.

Muse published to BC - BC synching to Muse problems

We have a problem with a Muse site that has been published to Business Catalyst. http://www.parkerandassociates.co.nz/
The client needs to access the File Manager which by default with Muse is not enabled, so in order to allow this the setting 'Enable online content editing (incompatible with Muse)' in My Details was enabled. We noticed that if edits were made in BC (namely uploading pdfs and linking theses to areas of text in Muse pages) and the enabled compatibility was left on, when the site was opened again by us in Muse the ‘Merge changes’ functionality began to ‘unravel the site. It would begin to highlight each text box and elements on the page (none of which had been edited), one by one. In other words if we just clicked 'Merge all changes’ it would delete the entire site, one element at a time. Changes that the client made in BC were corrupting the Muse file on synching back to Muse. We told the client to make sure the compatibility option was disabled after changes were made and this seemed to fix things. Initially this stopped the ‘unraveling’ and we were able to continue merging the in browser edits with the Muse file, until yesterday. Now we can’t merge new edits without this problem arising.
The site is also using the added Blog Modules by Muse Grid Adding a Business Catalyst Blog to your Adobe Muse website
Any assistance or advice on what is going on greatly appreciated as we have no idea why this is happening and it's starting to look like the site needs to be rebuilt in BC and abandon Muse (obviously we don't want to do this).
Thanks

Hi Grant,
The sync feature assumes that changes have been made using In-Browser Editing alone. Changes made manually are not supported.
That said, merge should not end up unraveling/deleting the site. I assume you mean it deletes content within individual text frames?
You always have the option to ignore changes per text frame. That would work so long as the manual changes and the in-browser edits were performed on separate text frames.
Also, the 'Enable online content editing' option does not affect the sync feature at all.
Abhishek

MSI GT70 0ND win7 problem

Hi!
Im having problems installing intel integrated graphics card on win7 x64 and without that i cant install my GTX 675MX 3gb...
my config: intel core i7 3630QM
nvidia gforce gtx 675mx
DDR3 16gb
750gb HD + 128gb SSD
laptop came with win8 but in my experience its crap so i wanted to downgrade...
any help is appreciated!

Thank you so much!! ive been battling this for a whole day...i dont know why but i was always aiming for 4600...
works perfectly

Blackberry Bold 9700 will not synch with win7/outlook 2010 64 bit

Can any one please help I upgraded my BB Bold 9700 to OS 6 and have the newest version desktop 710_b042 I run windows pro 64 bit and office 2010 64 bit. When I synch the desktop recognises my phone behaves normally and goes through all the motions as if synching but nothing is synchronised. Am I missing some drivers? Spent over a day on this problem already. Will be gratfull for any help or advice thanks

drumfly wrote:
Or, should I pull out my old Palm TX... it would probably work better.
lol, oh yea.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

SYNCHING OUTLOOK CALENDAR PROBLEM!

I had no problems synching my Outlook calendar with my boss's Z10 until the latest BlackBerry Link software update (1.1.1.26) (which was a problem in itself: after several fruitless attempts to update, had to uninstall and download from the BlackBerry site).
Now when I do the synch, the Z10 Calendar is rendered completely blank - although the data is obviously somewhere on the Z10 as appointments DO come up under 'forthcoming appointments' or whatever the title is on the Hub.
Any help on this very gratefully received!

Alas, I can't remember and my boss is away with his BlackBerry! Once I get it in my hands again, I'll have a look and see if I can work out what it was I found ....

P45 and Win7 problems?

Hi,
My system is about 10 months old, homebuilt, originally installed Vista64. It took a while but with bios Ver.1.4 was finally able to get stable,Ram at 1066 and OC to 3.0ghz.
Upgraded to Win7 64. Started having random blue, green or black screen crashes. Flashed to Ver 1.6 . This did not seem to help or make things worse. All drivers and Win7 were up to date. No problems running memtest or prime.
Next I setup a dual boot with XP sp3 32bit. Also went from the onboard sound to Soundblaster. XP runs fine with no crashes. Have had this setup for about a month.
Today, set ram back to 800mhz. Still getting the crashes in Win7. Most time crash starts with mouse lock and audio stutter if music is playing, this lasts for about 1 to 2 secs then screen goes green or light blue/white or black. Then have to hit reset. PC will then reboot to option for safe mode but loses wireless mouse and keyboard, has to time out then will load windows and mouse and keyboard will start to work again.
I downloaded the latest beta bios but did flash yet....I hate flashing the bios.
Any help will be appreciated....
Thanks,

Quote
All I can say is don't mess with flashing BIOS again as 1.6 seems to be just fine for the rest of us with P45 Plat
Unless you have 4 sticks of matched RAM. Which there is a bug in 1.6 that causes the chipset to be confused about the size of the RAM sticks and you end up with 5 memory slots and 12GB of RAM.
Also, the newest beta compared to the 1.6 final is far better in RAM performance. I am seeing 33% Bandwidth increase and greatly reduced latency in my overclocks.
But down to the real matter.. The major culprit is almost certainly the dedicated sound card.

Synch and connect Problems after upgrading to latest version 7.6.1.9 itunes

OK... this is getting painful!!!!!!!!
1. Has worked for 6 months flawlessly....
2. Upgraded Apple TV to the latest update - 2.0 - new look and feel.
3. Said I now needed to update iTunes to latest
4. Updated itunes to 7.6.1.9
5. Apple TV still showing in iTunes. Went to synch - "got apple TV not responding port 3689".
Apple TV could still connect to movie trailers, youtube, everything,
6. Tried repairing iTunes 7.6.1.9 with install. Had to reenter Apple TV password. Showed in device list - still same not responding error.
7. Uninstalled iTunes - reinstalled - along with cycling Apple TV. Apple TV showed in device list - not responding still.
8. Verified firewalls - non enabled just for a sanity check. I've kept all firewall stuff off. Still same issue.
9. Tried Edit/ Preferences/ Sharing/ Share my library on local network. Nothing
10. Verified "Look for Apple TVs" enabled and mine shows in list. Still nothing.
11. Turned Airport Expres in Apple TV off. Cycled everything... itunes, Apple Tv... nothing... Turned it back on....
12. In Apple TV I synched to local itunes.... Apple TV now got fully erased. as I expected, but did not care just wanted it to synch to the new content.
13. Reset the Apple TV to factory settings...... It showed in the Itunes for a few seconds, but not enough time for me to put in the password. I've recycled everything again. For the life of me I can't get it to now show consistently in the device list..... My wireless works flawlessly browsing the internet. I've done netstat checks to verify the ports and everything seems as it always has. IT HAS TO BE THE UPDATES!!!
There should be no application conflicts, because this machine has only been used to synch my Apple TV, nothing has been installed in a while, except iTunes!
I'm about to bring it back........
Any other thoughts out there?

Resolved.
After verifying my network configurations, which was fine, I started to look at the services loaded on the machine. I noticeced BLACKICE running! Once this service was stopepd, things went smoothly.
I do still notice that the synch lasts only for so long and then disconnects the device. I have to restart iTunes to kick start the synch again. Still a little painful, but at least I can loat the Apple TV.

Laserjet 1300 driver for Win7 problem

Plugged my Laserjet 1300 into my new computer (System 7) via USB- and Windows couldn't find the right driver for it.
I canceled Windows trying to install driver automatically, and put original CD driver disk (Serial #Q1334-60107 ver 2.0) into drive-
but couldn't get Windows to recognize printer, even after re-boots.
Since I bought printer a while ago, I checked for updated drivers online, that would be 64 bit.
I installed this one:
upd-pcl5-x64-5.4.0.11744.exe
During driver install I plugged in printer & turned it on at what i thought was right time. I see this:
"HP Universal Printing PCL 5" as printer- but it won't print.
Tried Windows 'Uninstall' feature but it doesn't show the driver, to un-install it- OR where the driver's located.
** QUESTIONS: How do I Un-Install the driver? Do I use upd-pcl5-x64-5.4.0.11744.exe OR original disk driver #Q1334-60107 ver 2.0?
What's the procedure for installing this?- I can't find anything, despite an afternoon of Googling.
Thanks.
This question was solved.
View Solution.

Did you follow this guide to install the print? Installing LaserJet 1300 on Windows 7
You should not need to navigate to the driver you download. Actually stick it in the trash can for now When you selecet "Add a Printer" you need to select "Add a local printer." Ignore the writing to the right, that only applies if everything is working properly. If you follow the guide at the top it should get installed properly.
No need to feel foolish and no problem at all for helping. Thats what I am here for
-Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Win7 problem with Telnet with IE8 (32 bit version)

We are not able to run Telnet in Win7 (64bit) with IE8 (32 bit ) (example:
telnet://ip), but it works with 64bit IE8.
Any solution?
Thanks
Bahram

To enable Telnet client functionality in win 7, 64 bit, with IE 8 ,32 bit, please follow these instructions:
1-Open the telnet client in control panel.
A) Go to Control Panel
B) Point to Programs And Features
C)Click Turn Windows features on or off
D)Check Telnet Client
E)Hit OK
2-
Copy the 64 bit version of telnet.exe from %windir%\System32 to %windir%\SysWOW64
3- Add the following registry key for the 32 bit version of IE
Open Regedit.exe and navigate to the following registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Internet Explorer\MAIN\FeatureControl\FEATURE_DISABLE_TELNET_PROTOCOL
Backup to original key by right clicking “FEATURE_DISABLE_TELNET_PROTOCOL” and selecting export.
Save the key to a location where you can easily locate the file if it needs to be restored.
If this key does not exist, please add the Key as named above.
4- Right click “FEATURE_DISABLE_TELNET_PROTOCOL” again and select “New” and “DWORD (32-bit) Value” from the menu.
In the right pane, name the new value “iexplore.exe”.
Verify that the value for iexplore.exe is 0x00000000 and then close regedit.exe.
5- Copy
%windir%\system32\en-US\telnet.exe.mui to %windir%\SysWOW64\en-US

G400s after installing win7 problems..

I install windows 7 in this preinstalled windows 8 notebook, but there're several problems that I need helps with.
1. After installation, the preinstalled programs like youcam and onekey recovery are gone. I can't find them in the g400s drivers download page.
Please let me know where I can download them, and what other preinstall programs beside youcam and onekey, that are useful and I might want to install.
2. So if onekey recovery doesn't work in windows 7, what should I do if I decided to change back to windows 8?
I don't have product key or cd since it's already in the system when I bought it.
3. After installation, my 2nd hard disk (named Lenovo something), just disappeared.. and now left with just 1 disk.
What happened?
Please help! Thanks!

Nozomi wrote:
I install windows 7 in this preinstalled windows 8 notebook, but there're several problems that I need helps with.
1. After installation, the preinstalled programs like youcam and onekey recovery are gone. I can't find them in the g400s drivers download page.
Please let me know where I can download them, and what other preinstall programs beside youcam and onekey, that are useful and I might want to install.
2. So if onekey recovery doesn't work in windows 7, what should I do if I decided to change back to windows 8?
I don't have product key or cd since it's already in the system when I bought it.
3. After installation, my 2nd hard disk (named Lenovo something), just disappeared.. and now left with just 1 disk.
What happened?
Please help! Thanks!
One Key Recovery (OKR) works with Windows 8 pre installed OS using a special partition that is on the hard disk drive. When you installed Windows 7 it mostlikely formatted the entire drive, wiping out both the Windows 8 partition and the OKR partition in the process.
At this point the Windows 8 files are lost and if you wish to re-install Windows 8 it will require the recovery disk set purchased from Lenovo Support. The other programs that were loaded on with the orginal disk may not be supported by Windows 7, or there are no drivers in Windows 7 to support the hardware that is linked to that software.
Good luck.

Downgrade to win7 problem with audio drivers. beats audio software for win7?

I recently purchased the HP Envy 700-074 from best buy. it was necessary to downgrade to windows 7 for some work software and I would like proper audio drivers/software for windows 7. Right now it seems to be detecting as Nvidia audio driver but in this case it doesnt allow my front panel audio ports to output audio. I would also like to have beats working.
here are the hardware ID's associated with the card
HDAUDIO\FUNC_01&VEN_10DE&DEV_001C&SUBSYS_38423619&REV_1001
HDAUDIO\FUNC_01&VEN_10DE&DEV_001C&SUBSYS_38423619
and here's a quick screenshot of the driver that is associating with it right now..
http://gyazo.com/23499c19d5e2a21f81b9124ad822c07d.png
even those VEN_10DE's seem to associate to nvidia, but from HP the driver is meant to be IDT high definition audio? is something going on here?
the only change i've made to the computer is upgraded to an EVGA Nvidia GT 610 video card.,

Hi, Paul.
I have similar problem here.
I bought HP Envy 810-200nr and I hate W8, so I installed Windows Server 2008 R2, which is my favourite.
Then I solved numerous problems with chipset drivers and finally it all works, but Audio (IDT HD Audio) does not work.
Completely silent.
HDAUDIO\FUNC_01&VEN_111D&DEV_76C7&SUBSYS_103C2AF3&REV_1001
HDAUDIO\FUNC_01&VEN_111D&DEV_76C7&SUBSYS_103C2AF3
It looks okay, when playing audio - indicator blinks and shows level, volume can be adjusted, all parametrers - speakers, etc seems okay but silent!
I tried numerous drivers for W8 and W7 64 but they give "Incompatible version" error.
Can you advise me what to do? I really want WS2008R2 here, but this audio is weird..

Synching Address Book Problem

Hi,
I created a group on Address Book that I wanted to use on my iphone to send multiple text messages.
When I synched through Itunes only part of my contacts were imported to the iphone, my favorites were no longer recognized and only part of the group was recorded, as if randomly.
Please help.
Thanks,
Matt

Welcome to Apple Discussions.
There is no way to 'fix' this feature, as it is only applicable to birthdays. It is possible to use other applications to create a calendar into which anniversaries or other dates are copied from the Address Book, or use AppleScript to do it. But the automatic creation of a read-only Birthdays calendar in iCal, based upon birthday data enter in Address Book contact records, is supported only for birthdays.

E50 Outlook Contacts Synch Causes a Problem for my...

Whenever I synch up my Outlook 2003 contacts to my E50, I can see all of my Outlook contacts, but the phone is not displaying the regular (SIM) contacts anymore. In order to get to my SIM contacts, I have to go to "Contacts" --> "Options" --> "SIM Contacts" --> "SIM Directory".
Also, when I synch up my Outlook contacts with my phone, I do not get the caller info (Ex.name) if that caller is one of the SIM Contacts. It will only show the name for the Outlook contacts.
Is there a fix for that? Or maybe it is a user error?
Thanks!

by holding down the power button until it turns off. It should take 5-10 seconds. Or, you first may want to try and force quit Outlook.
"To force quit an application, choose Force Quit from the Apple menu (or press Command-Option-Esc), then choose the unresponsive application in the Force Quit window, and click Force Quit.
Optionally, you may be able to Option-right click the application's icon in the Dock and choose Force Quit from the contextual menu.
Additionally, you can force quit the front-most application in Mac OS X v10.5 or later by pressing Command-Option-Shift-Esc for three seconds."
http://support.apple.com/kb/ht3411

Is it possible to get a cler answer on the Gameport/win7 problem ?

Hi people,
I got a SBLive audigy 2 ZS installed on Windows 7 Ultimate 64bit and of course the gameport is not recognized ... I tried a driver posted on this forum ( http:// forums.creative.com/t5/Windows-Vista/Creative-Game-Port/td-p/35808/page/3?view=by_date_ascending ) but it didnt work ....
Is there a fix for that problem ? I use that gameport for my MIDI controler to make music so needless to say that it's mandatory for me to get this to work ...
Also , could it work if I get one of these USB to Game Port adaptor ? ( http://www.usbgear.com/computer_cabl...&catid=626,06)
Thanks in advance.

Like a lot of you, I am trying to get my DA15/Gameport Joystick to work in Windows 7 64bit and I am hoping who ever reads it can possible help fix this problem, I think a solution would help me and a lot of other people. The joystick in this case is my Microsoft SideWinder Force Feedback pro, great stick!
And too boot I thought I had a great solution witch worked on my Dell Precision 650 with Windows 7 x86 32bit.
This was to install a Sound Blaster Audigy 2 zs sound card, which has MIDI/Gameport header on the card (Which requires a purchase of separate, DA15/Gameport header bracket) and the use of Daniel Kawakami's Audigy_Support_Pack_5.3 along with the Gameport_vista.exe drivers he extracted from Windows XP x86 32bit.
But I ran into a problem 3/4 of the way through. With the drivers, I can like most of you get Win 7 x64 to recognize and install the drivers for the Gameport itself. But getting the joystick install is the other part Which is where most have hit a brick wall an seemingly insurmountable one that laughs at us with a **** eating grin. That requires the Gameport Control Panel utility from Windows XP x86 32bit. Which according to research the SYSwow64 emulator in Win 7 x64 dosent allow the 32bit Control Panel utility to install. So therefore, using the Sound Card method to install and use DA15/Gameport joysticks dosent work for 64bit systems.
That is unless someone who is an awesome programmer (which is not me), could re-code, patch, or just some how figure out a way of fixing/installing the 32bit Control Panel utility to be used in Win 7 x64. This would solve a lot of problems not only for me but anyone else for just about another joystick there is and also for anyone who has a horde of great DA15/Gameport joysticks stuck int there Moms basement.
The only thing I have found out on the net, is the use of USB to gameport adapters such as the Rockfire RM-203, but that only works on analog controllers. The MS SideWinder FFB pro is all digital, but then I found about the FFB-Vert Project, its an opensource project that uses Tinsey 2.0 boards and firmware to provide a dedicated adapter for all MS Sidewitnder joysticks including FFB pro with Force Feedback effects. Its 40.00 pre assembled, I am thinking about geting one.
So if you have a x86 32bit system, you can slap in a great Sound Blaster sound card and install the drivers. Then BING BANG BOOM you have your old trusty 'stick back and can go to town on all who dare get in your way just like it was '96. But as always for us x64 64bit users there is always a problem and it costs money to fix, but at least for the FFB-Vert Project it sounds like a good cause and could use the support.
Links:
Scott Johnson's: FFB-Vert Project http://iowajohnsons.com/FFBVert/FFBVert.html
Daniel Kawakami's daniel_k's: Audigy Support Pack 5.3 http://danielkawakami.blogspot.com/2...t-pack-53.html
Gameport_Vista.exe (Which contains the Control Panel utility)
https://onedrive.live.com/redir?resi...7879b%21215758
Amazon RockFire RM-203 USB to Gameport Adapter:
http://www.amazon.com/game-Adapter-R.../dp/B004HAX7OU
Oh PM is you have any questions and/or would like a DA15/Gameport header bracket, there sometimes kinda hard to find.

M125 synch to Win7 problem

Similar Messages

Maybe you are looking for