M1319F Scan error message " cannot communicate with the scanner"
I have a HP M1319F which was able to print/scan/fax. Recently the fax function has ceased. I have ordered a fax board which will hopefully resolve that problem. Now it does not scan as well. I get the error message " cannot communicate with the scanner" . unistalled and resinstalled the software but to now avail
I have a HP M1319F which was able to print/scan/fax. Recently the fax function has ceased. I have ordered a fax board which will hopefully resolve that problem. Now it does not scan as well. I get the error message " cannot communicate with the scanner" . unistalled and resinstalled the software but to now avail
Similar Messages
-
i am getting the error message "cannot communicate with the server" when i try to sign into my apple account on my ipad - any ideas???
Welcome to the Apple Community.
The following article(s) may help you.
Photo Stream ToU's -
Cannot Communicate with the scanner
Hi
My Printer is Laserjet M1132 on Windows 7 64-bit
"Cannot Communicate with the scanner" this is the error msg I find when I try to scan.
Printing & Copying working well.
I run (HP print and scan doctor) and this was my journey with it ...Hi @AmrEmad1434 ,
I see that you are experiencing issues scanning. The Print and Scan Doctor is showing issues with the WIA and Twain. Thank you for providing the screen shots. I would like to help you out today.
WIA drivers are part of Windows Operating System.
Run this Microsoft Fit It Tool to see if it will resolve this issue.
Diagnose and repair Windows File and Folder Problems automatically.
This document is to Check the Windows Image Acquisition (WIA) services.
Windows: HP Scan Software Does Not Open or Scan on a Printer Using a USB Connection.
Disregard the title.
Go to Solution three: Check the Windows Image Acquisition (WIA) services.
Temporarily turn of the Antivirus Software and try scanning again.
If the issue persists, download and try to repair the WIA drivers. If you don't feel comfortable about doing these steps, you can contact the computer manufacturer or Microsoft to resolve this WIA error.
Back up the registry first.
How to back up and restore the registry in Windows.
Restore Default Startup Type for Windows Image Acquisition (WIA).
If the issue persists, create a new user account with Admin Rights and install the printer software.
Create a user account.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Canon LiDE 120 Error message: "Cannot communicate with scanner for these reasons:"
I've tried troubleshooting multiple times: - Uninstalled and reinstalled drivers- Returned and bought same model scanner- Tried different drivers- Tried different USB ports My computer build is:Intel i7 4770k16GB 1866MHz RAM Asus Maximus Impact VInVidia GTX 780Corsair RM550Windows 8.1 64bit I don't know what I'm doing wrong. Anyone else get this? It's making me quite livid just trouble shooting it. I've read a lot of reviews on this on Amazon and other websites that says that this is plug and play for the most part. What am I doing wrong??
I have CanoScan Lide 120, which was working perfectly fine on Win7, now that I have upgraded to Win10 it does not work anymore. I get an error 2,156,167. Have tried to uninstall the driver, found new one on official website, but it didn't help.Scanner makes noise, like it's going to start scaning, but then nothing happens. When I use the preview function, it actually starts scanning, but stops somewhere in the middle (at 7%, 18%, ...) My specs:OS Name Microsoft Windows 10 Pro
Version 10.0.10240 Build 10240
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name NEW-PC
System Manufacturer ASUS
System Model All Series
System Type x64-based PC
System SKU All
Processor Intel(R) Core(TM) i3-4130 CPU @ 3.40GHz, 3400 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. 0803, 7.1.2014
SMBIOS Version 2.7
Embedded Controller Version 255.255
BIOS Mode Legacy
BaseBoard Manufacturer ASUSTeK COMPUTER INC.
BaseBoard Model Not Available
BaseBoard Name Base Board
Platform Role Desktop
Secure Boot State Unsupported
PCR7 Configuration Binding Not Possible
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale Slovenija
Hardware Abstraction Layer Version = "10.0.10240.16392"
User Name NEW-PC\Gašper
Time Zone Central Europe Daylight Time
Installed Physical Memory (RAM) 8,00 GB
Total Physical Memory 7,68 GB
Available Physical Memory 4,73 GB
Total Virtual Memory 15,4 GB
Available Virtual Memory 12,1 GB
Page File Space 7,75 GB
Page File C:\pagefile.sys
Hyper-V - VM Monitor Mode Extensions Yes
Hyper-V - Second Level Address Translation Extensions Yes
Hyper-V - Virtualization Enabled in Firmware No
Hyper-V - Data Execution Protection Yes -
I'm trying to scan but instead of the scan a message comes up from PS saying "An error occurred while communicating with the scanner." help- I cannot scan!
Best practices: Usage
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc. -
My iPod touch 4th gen. Keeps giving me the error message "cannot connect to the app store when I sign in. I can open the app store and browse it but I can't download anything. I have full signal strength with my wi-fi and safari is working perfect. I turned it off and restarted it 3 times now. I have an iPad 2 and the app store works flawlessly with it. What is going on?
Same here on my lpad2. Can access the web just fine from browsers but cannot install new apps or updates in appl store. Seeing a few others reporting same issue tonight so likely an apple server issue and staff will notice it in network monitors and fix it...sometime this weekend.
Rob -
I keep getting an error message "cannot connect to the internet." Is this a problem with my internet provider, or has anyone else had this problem.
I get that problem once in a while and I will not be able to connect to the Internet with any of the 5 or 6 (or 7 or 8 ) web browsers that I use on my iPad. The one thing that I do that has never failed to work for me is to close all apps on my iPad and reset the device. I can't guarantee that it will work for you, but this works for me every time I get the server failed to load/can't connect to the Internet message.... Or whatever the exact message is.
If you have a ton of apps in the multitasking display, it can take a while to close them all, so you could just trey resetting the iPad first and that might be all that you need to do.
Closing apps in iOS 7 works like this. Drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
Jabber is unable to register through expressway (Error:Cannot communicate with the server)
Hello Experts !
I am getting below error while trying to login in jabber through expressway . Please help me to fix this issue
Attached is the file .
(Error:Cannot communicate with the server)
Regards;
KVOk, let's clarify, what u have (correct me, where I am wrong):
1. We assume,that outside server's config is okay (there are only collab_edge srv for outside domain);
2. Traversal Zone is up (everything is okay with certs, IM&P nodes,CM are added);
3. Both domains (inside/outisde) are created on E/C and properly configured;
4.Inside DNS server has has srv records (cuplogin,cisco-uds) for both domains:outside,inside;
If yes, then you need to reset jabber, make "ipconfig /flashdns" on client, flash dns on E/C.
Start logging with packet captures and tries to login. After that, start checking from packet captures: client, E/C. Try to search for DNS lookups, if evry node tries to find appropriate server (client->E, C->IM&P) .
Regards,
Kirill -
Canoscan 88ooF error report, "Cannot communicate with scanner."
When I try and use my scanner I get the error report,"Cannot communicate with scanner, check that it is plugged in and truned on." When I go to Windows device manager I can see it and when I click on the properties buttonn it says that the device is working properly. I have downloaded the latest driver software etc., and I have uninstalled everything and re installed again but I still get the same error report.
I am using Windows 7, 64 bit version.
Above is the error message I get.
Solved!
Go to Solution.After two days of fruitless effort I have found my own solution. I have downloaded and installed VueScan x64 and it works a treat. I think the problem I have been having is due to the fact that the scanner driver is 64 bit and the programs that install are 32 bit and although scanner driver is working perfectly well the 2 bit probrams can't see it.
-
LDOM Issue on T2000 ldmd cannot communicate with the hypervisor as the re
Hi,
There were some issues with old primary LDOM at T2000 so I installed
new o/s 64 bit on SUN SPARC T2000 and reset SC on factor-default and
also installed LDOM 1.2 version. Seems like old hypervisor is not
deleted.
Now I am getting error.
#ldm list
Failed to connect to logical domain manager: Connection refused
So far I have trying the following steps. but still no luck
I installed version 1.2 LDOM. and also I updated SC. Plus I installed
below patches:
•118833-36, Kernel update patch
•124921-02, which contains updates to the Logical Domains 1.0 drivers
and utilities
•125043-01, which contains updates to the qcn (console) drivers.
SC> bootmode config="factory-default"
SC> poweroff
SC> resetsc -y
SC> poweron
Now I tried everything but still no luck
Here are some errot which I am getting
#Svcs -xv
[ Oct 5 00:07:14 Method "start" exited with status 96 ]
[ Oct 5 00:32:11 Leaving maintenance because disable requested. ]
[ Oct 5 00:32:11 Disabled. ]
[ Oct 5 00:32:21 Enabled. ]
[ Oct 5 00:32:21 Executing start method ("/opt/SUNWldm/bin/ldmd_start") ]
Service LOG file Info:
ldmd cannot communicate with the hypervisor as the required device
does not exist:
/devices/virtual-devices@100/channel-devices@200/virtual-channel@0:hvctl
Either this is not the control domain or the firmware does not support LDoms
[ Oct 5 00:32:21 Method "start" exited with status 96 ]
[ Oct 5 00:43:54 Leaving maintenance because disable requested. ]
[ Oct 5 00:43:54 Disabled. ]
[ Oct 5 00:45:19 Enabled. ]
[ Oct 5 00:45:19 Executing start method ("/opt/SUNWldm/bin/ldmd_start") ]
ldmd cannot communicate with the hypervisor as the required device
does not exist:
/devices/virtual-devices@100/channel-devices@200/virtual-channel@0:hvctl
Either this is not the control domain or the firmware does not support LDoms
[ Oct 5 00:45:19 Method "start" exited with status 96 ]
[ Oct 5 00:45:19 Rereading configuration. ]
bash-3.00# cd /opt/SUNWldm/bin/
bash-3.00# ls
ldm ldmconfig ldmd ldmd_start schemas
bash-3.00# ./ldmd_start
ldmd cannot communicate with the hypervisor as the required device
does not exist:
/devices/virtual-devices@100/channel-devices@200/virtual-channel@0:hvctl
Either this is not the control domain or the firmware does not support LDoms
bash-3.00# ldm
Failed to connect to logical domain manager: Connection refused
bash-3.00# sc>
sc> showhost
Sun-Fire-T2000 System Firmware 6.7.12 2011/07/06 20:03
Host flash versions:
OBP 4.30.4.d 2011/07/06 14:29
Hypervisor 1.7.3.c 2010/07/09 15:14
POST 4.30.4.b 2010/07/09 14:24
bash-3.00#
bash-3.00# uname -a
SunOS ldom-srv 5.10 Generic_118833-36 sun4v sparc SUNW,Sun-Fire-T200
Thanks in advanceHi,
There were some issues with old primary LDOM at T2000 so I installed
new o/s 64 bit on SUN SPARC T2000 and reset SC on factor-default and
also installed LDOM 1.2 version. Seems like old hypervisor is not
deleted.
Now I am getting error.
#ldm list
Failed to connect to logical domain manager: Connection refused
So far I have trying the following steps. but still no luck
I installed version 1.2 LDOM. and also I updated SC. Plus I installed
below patches:
•118833-36, Kernel update patch
•124921-02, which contains updates to the Logical Domains 1.0 drivers
and utilities
•125043-01, which contains updates to the qcn (console) drivers.
SC> bootmode config="factory-default"
SC> poweroff
SC> resetsc -y
SC> poweron
Now I tried everything but still no luck
Here are some errot which I am getting
#Svcs -xv
[ Oct 5 00:07:14 Method "start" exited with status 96 ]
[ Oct 5 00:32:11 Leaving maintenance because disable requested. ]
[ Oct 5 00:32:11 Disabled. ]
[ Oct 5 00:32:21 Enabled. ]
[ Oct 5 00:32:21 Executing start method ("/opt/SUNWldm/bin/ldmd_start") ]
Service LOG file Info:
ldmd cannot communicate with the hypervisor as the required device
does not exist:
/devices/virtual-devices@100/channel-devices@200/virtual-channel@0:hvctl
Either this is not the control domain or the firmware does not support LDoms
[ Oct 5 00:32:21 Method "start" exited with status 96 ]
[ Oct 5 00:43:54 Leaving maintenance because disable requested. ]
[ Oct 5 00:43:54 Disabled. ]
[ Oct 5 00:45:19 Enabled. ]
[ Oct 5 00:45:19 Executing start method ("/opt/SUNWldm/bin/ldmd_start") ]
ldmd cannot communicate with the hypervisor as the required device
does not exist:
/devices/virtual-devices@100/channel-devices@200/virtual-channel@0:hvctl
Either this is not the control domain or the firmware does not support LDoms
[ Oct 5 00:45:19 Method "start" exited with status 96 ]
[ Oct 5 00:45:19 Rereading configuration. ]
bash-3.00# cd /opt/SUNWldm/bin/
bash-3.00# ls
ldm ldmconfig ldmd ldmd_start schemas
bash-3.00# ./ldmd_start
ldmd cannot communicate with the hypervisor as the required device
does not exist:
/devices/virtual-devices@100/channel-devices@200/virtual-channel@0:hvctl
Either this is not the control domain or the firmware does not support LDoms
bash-3.00# ldm
Failed to connect to logical domain manager: Connection refused
bash-3.00# sc>
sc> showhost
Sun-Fire-T2000 System Firmware 6.7.12 2011/07/06 20:03
Host flash versions:
OBP 4.30.4.d 2011/07/06 14:29
Hypervisor 1.7.3.c 2010/07/09 15:14
POST 4.30.4.b 2010/07/09 14:24
bash-3.00#
bash-3.00# uname -a
SunOS ldom-srv 5.10 Generic_118833-36 sun4v sparc SUNW,Sun-Fire-T200
Thanks in advance -
Am I correct in assuming that Messages cannot communicate with non-Apple devices?
Am I correct in assuming that Messages cannot communicate with non-Apple devices from laptops and or desktop apple devices? From iPhone there seems to be no barriers to this using Messages.
I wonder if Mt. Lion will include texting to "other" devices. For there to be true continuity across platforms this needs to happen.
Right now I am having an interesting thing happen - even messaging with another Mac User I am getting the red ! on all my messages sent from my mac. Yet he is gitting them. I am assuming this is some kind of beta thing. -
CRS-0184: Cannot communicate with the CRS daemon.
I am getting teh foll error when starting up a database
[oracle@linux2 ~]$ srvctl start database -d orcl
PRKH-1010 : Unable to communicate with CRS services.
[oracle@linux2 ~]$ product/crs/bin/crs_start -all
CRS-0184: Cannot communicate with the CRS daemon.
From the available information on the net, I have already tried the below steps.
a) Deleted all the files from /var/tmp/.oracle
b) Ensured that the deamon is running
[oracle@linux2 ~]$ ps -ef | grep crs
root 6192 1 0 15:31 ? 00:00:00 /bin/sh /etc/init.d/init.crsd run
oracle 1284 9630 0 16:02 pts/1 00:00:00 grep crs
c) The foll lines are already added to the /etc/inittab file
h1:3:respawn:/sbin/init.d/init.evmd run >/dev/null 2>&1 </dev/null
h2:3:respawn:/sbin/init.d/init.cssd fatal >/dev/null 2>&1 </dev/null
h3:3:respawn:/sbin/init.d/init.crsd run >/dev/null 2>&1 </dev/null
Plz help. I'm still getting the error on one node of the Cluster.[oracle@linux2 bin]$ crsctl check crs
Failure 1 contacting CSS daemon
Cannot communicate with CRS
Cannot communicate with EVM
The node is setup on RHEL 4u7 (2.6.9-78.0.13.ELsmp)
The first error in the crsd.log file says
2009-11-05 06:07:57.196: [ CRSOCR][3086907072]0OCR api procr_open_key failed for key CRS.CUR. OCR error code = 4 OCR error msg: PROC-4: The cluster registry key to be operated on does not exist.
Also, I have the '/u02/oradata/orcl' for the OCR and the CSS Files. On thsi node this directory is empty.
Whereas on the other node in the sam cluster, thsi directory contains the OCR and CSS files and their mirrors.
Is my OCR corrupted on thsi node? How can I restore it?? -
Cannot communicate with the server. Verify your connection and try again.
Hi,
Recently I performed SharePoint 2010 upgrade to 2013 including Project Server 2010 to 2013.
Error "Cannot communicate with the server. Verify your connection and try again." shows when I access PWA over extranet, while its fine if I access from any system within local network.
Any idea what can be the issue ?
Regards,
MeharHi,
Have you configured SSL configuration NLB. If yes, please add SSL URL in Alternate Access Mapping which is being configured on NLB
For instance. Add Https://servername instead of
http://serverame -
Jabber for Mac 9.2.1 Cannot communicate with the server
Hi All,
I'm using Webex and the Jabber for Mac 9.2.1 client that was automatically pushed. I see "Cannot communicate with the server" when I attempt to login.
The same credentials work correctly when using the 8.6.5 client version. I've attached the problem report file.
I would appreciate some guidance on what I need to do to get this to work.
Cheers,
SteveWe've seen this with a few of our users as well. All started noticing having issues Friday morning. As this is a hosted service for us via webex we had our engineers call in to Jabber support. Cisco performed a modification to their account and they were able to connect again. No SRV records were messed with.
***EDIT*** - This appears to have been caused by a certificate issue. The Trusted Root Certificate for QuoVadis expired and was not renewed on some machines.
Go here: https://www.quovadisglobal.com/QVRepository/DownloadRootsAndCRL.aspx
Install the Cert for : QuoVadis Root CA2 (in windows, download as DER>right click file>install)
Jabber should connect now. The issue was in SSL validation with the appropriate hosted servers. -
When I try to reformat there is an error message about configurations with the pointing device
When I try to reformat there is an error message about configurations with the pointing device
I am not sure I am on the correct section in the support area for Lenovo.
I had a mouse issue. It was unable to read the mouse. Now the mouse is working and it is initialized.
I have no idea why.
There is an error message saying that I should press F 1or F2. I pressed down F 1 and I tried to work with it and I enabled the mouse or I tried. The mouse is working fine but the computer will not recover completely the way it used to.
It is very confusing. When I shut down and restart there is an message that was not there before about the pointing device. Also the recovering operation never asked me for disks. Now it is doing that. I have disks but this is all confusing. I just want the computer to be the way it was. It is working fine except for booting up and the messages.Hi marissa, welcome to the forums,
you may or may not be in the right place, but it would certainly help members to help you if you could post exactly which Lenovo system; notebook / computer, you have and which operating system is installed on it.
Thanks in advance
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog
Maybe you are looking for
-
GetParameter()==NULL and memory
Hi everybody ! I'm creating a web site where users will be able to plot data from a database. So, I've an HTML code which call a PHP one which himself get data from database and create an JAVA applet on the following model : echo "<APPLET\n"; echo "<
-
Can't install Adobe Photoshop 7.0.1 update
I installed Photoshop 7 in a customer's computer and when I am trying to install the 7.0.1 update I get a message that it cannot find the installation folder, even though it is there and the program sees it. I read that this might be an issue of the
-
What are the limitations of the software during the 30 day trial?
what are the limitations of the software during the 30 day trial?
-
Hi Gurus, Could you any body help me the what is the auto cash process in sap Treasury. Thanks in advance. Ramanjaneyulu
-
Af:inputListOfValues popup : selecting first row
Hi, Is there a way to select first row inside lov popup, the by default behaviour is it selects the rowHeader rather than row itself. When the lov popup is opened , there is no focus on table resides in the popup - to focus on table, user has to pres