M1536DNF Duplex garbled mess, Lion, Snow Leopard and Win 7
I've had my M1536DNF for about a year now, everything has been fine, great printer, no issues whatsoever until recently.
I attempted to print some flight information, set it for 2 sided and thought nothing of it, went over to collect print job, the sides facing me are fine, the back side was almost entirely horizontal lines, some text did print top and bottom though. Exactly the same result on second attempt. As I was going away, I didn't have time to mess with it so I printed single sided and promptly forgot about it. This was with a Mac OSX Lion.
Month or so later, my partner was trying to print a document from her Win 7 laptop, same issues, multiple attempts and nothing useful on the back side. Transferred the files to another Mac - Snow Leopard and still same issues.
I've re-booted the printer, cleaned the printer, downloaded new drivers (which are not available for Lion yet so I don't know how this thing is working at all). Nothing seems to get it up and running again properly. Has something died on my printer or is this a software issue. I'm guessing hardware as the issue is 100% reproduceable from multiple machines, multiple operating systems.
At no point have I seen an error from the printer or print utility.
Scratch all of that. The issue is Chrome - the beta print panel seems to destroy the duplex side.
Turn it off with these instructions.
http://maketecheasier.com/enable-disable-google-chrome-print-preview/2011/04/13
Thanks Google!
Similar Messages
-
What external hard drives are compatible w/ lion, snow leopard and time machine?
I am looking to buy an external hard drive to back up all data on my Macbook Pro that is currently running Snow Leopard, then upgrading to Lion. I want an external hard drive that is compatible with BOTH Snow Leopard (for use of creating a backup prior to my upgrade) and Lion (for daily use once I've upgraded). I also don't want to spend more than $100 if possible. Any suggestions? Thanks!
There is currently a shortage of drives due to flooding in one of the countries in which they are manufactured.
Getting one for under $100 at this point might be difficult. You didn't mention how full your current hard drive is, but for Time Machine, you should plan on two to three times the data you currently have (or expect to have).
I looked through Newegg's selection and didn't see more than a couple 1TB drives for less than $100. I recently bought a 3TB drive for $150. They're in the $200-$300 range, now.
I always buy bare drives and put them in an enclosure I buy separately. All the name-brand, ready-to-use drives come with a bunch of software you don't need and some of their software causes problems.
I had some bad luck/bad customer service with Seagate, so I've been buying Western Digital. Though, my replacement drives from Seagate have been going fine.
I've used Icy Dock and MacAlly enclosures. Both have worked well. If you do decide to go that route, you must make sure the enclosure can support the size of drive you buy (both physical--2.5" or 3.5", and storage size--1TB, 2TB, 3TB). The controllers in the cases may not be able to handle a 3TB drive, for example.
No matter how you go, you have to decide what kind of interface you want to use. USB is cheaper, but Firewire is faster. Firewire 800 is even faster, but costs more. All of that depends on what ports you have on the computer. OS X doesn't currently support USB 3. -
I currently use Snow Leopard because I like the way it preserves the operation of OS10 PPC programs. I have both an expensive CAD program and Adobe Photoshop CS3 which are PPC programs.
Can you launch your machine with Lion when you want to use that, and launch with Snow Leopard when you want that. Its too bad Lion does not support PPC OS10.Absollutely. This is a very common practice whenever a new OS or OS update comes out. By far the best way to do what you want is to install Lion onto an external firewire 800 disk, then boot off it when you want to use Lion and boot off your iMac's internal disk when you want to use Snow Leopard. USB 2 will work, but firewire 800 will be faster.
The second best option is to partition your iMac's boot drive, then use one partition for Snow Leopard and the other for Lion, but be sure to back up your boot drive to an external disk drive before you partition it.
You can switch operating systems during a restart by holding down the option key. -
I was using OS Snow Leopard and on 8/1/13 I downloaded Mountain Lion. Then I found out it was not compatible with my HP Printer (HP Photosmart C5580 all-in-one) so I called Apple support and the tech told me to erase the hard drive instead of going in the time machine. Well I did that and then it took about three hours three days a week for about three weeks on the phone with an apple tech to get all my stuff back on my computer. I have had trouble with my printer (won't do the scan anymore and wasn't printing on my DVDs. Also the computer keeps freezing up when it is in the sleep mode, etc.
When I tried to list my problem on this forum it lists your OS at the bottom and mine had Mountain Lion listed as what I was using so apparently it didn't erase it. Want to know how to get Mountain Lion off and put my Snow Leopard on so things start working right.Go to the menu/About This Mac - what OS version shows there?
Do a backup, preferably 2 separate ones on 2 separate drives.
Revert to a Previous OS X
Revert to Snow Leopard
If you do revert, I'd use Setup Assistant to restore your data. This process takes a while, so do it when you won't need the computer for several hours, based on my experience. -
I have been making back ups on a Seagate Back up plus drive on a macbook pro running on Mountain lion. Sadly the mac was stolen and all I had was the seagate back up. I tried opening it on my old iMac running on snow leopard and after several visits to this forum managed to open it. The data was safe and sound. Now I have received a hand me down macbook pro which runs on osx 10.9.5. I'm assuming there is a compatability issue as the drive does not come on at all when I hook it up to the usb port. I checked the seagate drive once again on the imac and its light came on on that system. Then I suspected there may be a problem with this macbook pro usb port. But it seemed to work fine when i hooked my camera cord into it. Is it that I must reinstall mavericks. In which case how do I back up before reformatting or reinstalling. BTW I did the command+ R thingy and repaired my internal Hard disc which was showing errors. What do I do next, your help is most appreciated if you have had a similar problem.
Your 2010 MBP would be able to handle Yosemite, but I would strongly suggest that you get the current problem sorted out before trying to upgrade to Yosemite. I'd also recommend another backup that isn't created by Time Machine if you are thinking of upgrading. SuperDuper and CarbonCopyCloner can make bootable clones of hard drives. If you clone your existing system to a fresh external drive, you would be able to boot from that drive and recover quickly in the event that your Yosemite upgrade didn't work out. Time Machine backups are not 100% reliable.
It's possible that, if your internal HD is the one that shipped with your MBP in 2010, it may be failing. If it keeps needing repairs, that is probably a sign that it is approaching the end of its useful life.
Have you run Disk Utility's Repair tool on the external drive as well?
I mentioned the hub because some people have reported here that attaching their USB 3 drives through a USB 2 hub solved some disconnection problems. A good-quality powered USB 2 hub won't cost much.
My most recent brush with random disconnections involved a nice new OWC drive enclosure. I used the cable that came with the drive, but the drive kept disconnecting. Using a different cable solved the problem. You wouldn't expect that what appeared to be a high quality cable would be a problem straight out of the box, but it was. -
I am running Mac OSx Lion 10.7.2.
My issue is that I am not able to run a search in the finder toolabar on a network server. No files show up nor does it search on the server anymore. I was able to run the search in snow-leopard and am no longer able to do so with Lion. Is there a preference I can change or some kind of app or program I can download that will help me with this issue? This is extremely problematic for me as I am searching for files all day everyday. Thank you!Hello,
It isn't the fw in Network you want o use or look at, that's for something completely different.
My first suspect is the Power Adapter on the LaCie has gone.
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html -
HI, SO I BOUGHT MOUNTAIN LION ON MY MACBOOK PRO TRYING TO UPGRADE FROM SNOW LEOPARD, AND WHILE TRYING TO REINSTALL THE OS SETUP AS IT SHOWED IT COULDNT BE VERIFIED, I CROSSED OUT MOUNTAIN LION FROM MY PURCHASES, ITS NOW GONE, DO I HAVE TO BUY IT AGAIN?
Please google search for "Mountain Lion disk crash" before upgrading you mac pro. You might need to replace you Mac hard drive after the upgrade.So many people had the same problems including me.
Be aware of the Mountain Lion upgrade problem. -
Can I do a clean install of Lion, onto my Mac Book Pro4,1, that is currently running 10.5.8? I have seen U-tube videos on how to do a clean install to Snow Leopard, and another from SL to Lion, but can zero out my HD, and do a clean install to Lion?
See this article.
-
I have two partitions on my internal hard drive - one is running Mac OS X 10.6 Snow Leopard and the other is running Mac OS X 10.7 Lion. Mail (5.0) is set up and runs perfectly on the Lion partition and I have not used Mail (4.5) yet on my Snow Leopard partition. I want to know if I can read, download, and save mail into the same user Library folder (probably the Lion user library) from both partitions...
You usually set up your mail accounts on a specific e-mail client programs such as Mail in OS X and Mail on an iPad, which will access the same remote mail server to have your messages show up on each device. Mailboxes can be synced in this way between two devices.
An alternative is to use the same remote application such as Gmail to access that service from multiple devices, so a dedicated e-mail client like Mail is not needed, but the availability of these depends on the e-mail service being used. -
I just upgraded my MAC from OSX 10.5.8 to Snow Leopard and then to Mountain Lion 10.8.2. When I try to access my Microsoft Office for MAC (2004 edition) files I am getting a message "can't open Office because Power PC applications are no longer supported. How can I access all of my save Word documents? I just want to be able to retrieve all of my documents that were in Microsoft Office for Mac (2004). If I purchase the newest version of MS office for Mac from Apple will I be able to retrieve my old documents?
Use any number of free alternatives to your nearly decade old version of MS Office.
Consider
LibreOffice (donation-supported)
NeoOffice (free)
OpenOffice (free)
In addition to the above I also recommend Apple's Pages ($19.99). I use OpenOffice and Pages and have been completely Microsoft - free for years. Life is better without Microsoft. -
I have never done this before, so can someone explain in detail how I reintall my system software and then restore from Time Machine please ?
Your profile indicates that you currently have an older version of Snow Leopard (10.6.2). In order to install Lion, a prerequisite is the latest version of Snow Leopard (10.6.8). Perhaps a few more details would be helpfull in solving your problem. ex. If all you want to do is to upgrade to Lion, a restoration of data is unneccessary. Download the latest version of Snow Leopard and then download (purchase) and install Lion. User data will remain intact.
If I am missing something, please elaborate.
Ciao. -
External hard drive Snow Leopard and Lion compatibility?
I am going to install Snow Leopard on my Mac (so I can then purchase Lion and install THAT into my Mac) but it only has 975 mb of memory left. So, I've decided that I need to purchase an external hard drive so that I can transfer some videos, songs, etc. to create more space on my Mac. My question is, what external hard drive will be compatible with Snow Leopard and Lion? I was going to purchase a Western Digital external but I've heard many problems of it being incompatible with Lion. What's a reliable and compatible brand that I could purchase? I'm looking for an external hard drive that hold at least 500 gb.
I think your analysis is kind of harsh, kurt.
'garbage'? really?
Sure, some familiar paradigms have changed, and change brings pain - or at least, unfamiliarity - but that doesn't necessarily mean they're bad.
Of all the changes you mention three things that you consider abominations...
UI changes more in line with iOS. Sure, and this is bad because...?
It's clear that Apple see the iOS as the future, and it makes sense to unify the experience - at least where it makes sense. You don't actually mention which elements you consider bad, BTW.
The scrolling seems to be the one most often cited, but to me it makes way more sense to manipulate the document directly, rather than manipulate a scroll bar that works inversely. I'm not sure what other UI elements you're concerned about.
As for the Save As... issue, the change to Duplicate makes a lot of sense when you understand the concept of automatic file saving and versioning. There's never a need to 'save as' in order to create a point-in-time backup since you automatically get point-in-time backups just by using the OS. The only reason it makes sense to to force a branch and for that, 'duplicate' makes sense. If it bothers you, just read 'duplicate' as 'save as'.
The big break here is that versioning requires application support - the developer needs to add it to their app code - and that creates inconsistencies in the short term because not all apps support versioning. That will fix in time as developers release updates to their apps.
As for bugs, the current release is 10.7.2, so that's two revisions past the original. Any major release (of any applications, not just an OS) is going to have some number of issues and some people avoid any .0 release just for that reason. I think the concensus is that by the time you get to .2 most of the issues have been resolved. Can you point to any bug in 10.7.2 that directly affects you and your use of the OS? or are you basing your statements on outdated material?
In short, every major OS release, from every OS vendor has some number of changes that confuse and upset users, and some number of short-term pain while application developers and users get up to speed. Lion is no different in that respect, and if you look back in history you'll see the exact same sentiment for Snow Leopard's release, and Leopard's, and Tiger's, and..., and..., and...
To call it garbage, though? I think not. -
How do I make a back up system disk. I wish to run snow leopard and Lion on 1 drive.
I wish to run Snow Leopard and Lion on 1 Hard Drive. I need to back up snow leopard and then install Lion. Any suggestions on how to do this?
Too follow up on this topic - I have recently upgraded to 10.8.2. I have a complete backup HD with SL inclluding some SL-only programs on it. What I want is to make a small size, just SL and my few programs, hard drive with which I can boot when needed. Is it possible to trash all the many programs I have on the SL drive and just keep certain ones? How?
Thanks you for any advice,
John -
Can I back up computer with time machine on lion then reinstall snow leopard and restore from backup safely?
If your machine came with Snow Leopard or earlier and you have your install disks, yes, you can reinstall SL. However, you will need to erase the entire hard drive so you will lose all your files. Also note that there are some apps (such as Mail) which can't be downgraded "automatically" such as with a restore from Time Machine. Here is some info on TM:
http://pondini.org/TM/14.html -
I have a mid 2010 Macbook Pro running Snow Leopard and foolishly upgraded to Yosemite. Now have numerous problems. Is it possible to go back in time with Time Machine and reinstall Snow Leopard? Then upgrade to Lion or Mavericks? Any other ideas on how I can exit Yosemite?
Once you get yourself back to Snow Leopard, if you still want to upgrade somewhat, I would suggest the following:
1. Get an external hard drive that you can use for experiments with new OS versions. You could partition it into 2 or 3 partitions. You could then clone your existing Snow Leopard system to one partition using Carbon Copy Cloner (well worth $40) or SuperDuper ($25).
2. Buy OS X Mountain Lion for $20, through the Apple online store (I don't think it's available through the App Store). Apple has decided to make it very difficult for anyone to get Mavericks unless they have already downloaded it.
You will receive two e-mails from Apple, one containing a PDF with a redemption code, and one with the password you will need to unlock the PDF. Using the code, you will download Mountain Lion from the App Store, where it will appear among your Purchased items.
After ML finishes downloading, its installer app will launch itself. When you see this launch screen, QUIT the install app immediately! Go to your applications folder, find the Install OS X Mountain Lion app, and copy it to a safe location outside of your Applications folder. Keeping one or more copies will allow you to reinstall without unnecessary aggravation if you later need or want to do that. At this point, you can re-launch the Installer in the Applications folder and let it run. You can install it on a clean partition on your external HD, or you can allow it to upgrade the Snow Leopard clone you created on your external drive, or you can do both. This should allow you to test how everything works for as long as you like.
3. If you left yourself a free partition on your test drive, try a clean install of Yosemite and set everything up from scratch (do not migrate anything). This will allow you to see whether your problems with it were related to something in your Snow Leopard system.
Maybe you are looking for
-
Multi Monitor - Windows Key + Left/Right not working?
Hi everyone, Just checking whether it's just me or other people having this issue (I can't find a similar thread for the Windows 10 Technical Preview). Windows Key + Left/Right does not seem to snap to another monitor. On my setup it continually cycl
-
Build array of elements in a for loop
Hello, I have a program where I am taking voltage measurements and computing resistances inside of a for loop. I then want to take these values an place them in individual arrays which are then sent to another subVI to compute the mean and standard d
-
Third Party Keyboard Function Keys
I have bought a third party keyboard (Razer Anansi) for my MacBook Pro, and I cannot get the the function keys (f#) work as normal keys. I have checked the option "Use all F1, F2, etc. keys as standard function keys" in keyboard preferences, but it s
-
How do I get iMovie to refresh its iPhoto videos import and thumbnails? I've taken several videos which are in iPhoto which don't appear to have been updated in iMovie event. Any help much appreciated. D
-
Playback of captured HD files in Quicktime Pro 7 and FCPS5 no longer works!
Hello to all, this is my first post here on FCP discussions so please be kind also, I am somewhat a novice with FCP, Macs and QT pro. Here is my problem - A year a go a purchased the full FCP pro 5 HD studio and I captured some Hi def 1080i50 footage