M251n can't enable hp web services

I just got an M251n printer and I have been trying to set up the wireless for hours going through all the support suggestions and none have worked. When trying to enable the Web Services Setup I get a message of "Connection error. Check internet connection." The connection is fine and working and the printer is connected online via ethernet and my computer is connected to the printer by USB.
I am using a Mac and have downloaded the latest driver for the printer. One support suggestion stated that I might have outdated firmware but I can't find any firmware updates for this printer.
I am not sure what is wrong. It's not straight forward and without the wireless function working I will have to take this printer back and buy a different brand.
Any suggestions are welcomed.
This question was solved.
View Solution.

Hello neilthedirector,
Welcome to the HP Support Forums!
I see that the HP LaserJet Pro 200 color Printer M251n will not allow you to enable the Web Services. I was able to locate a firmware update utility that you can check the printer with, if you are using Mac OS X 10.5 - 10.8.
HP LaserJet Pro Series Firmware Update Utility<---
If the update is not present, or fails to resolve the issue, try applying a manual I.P address and DNS. To do this;
Enter the printer's I.P into the address bar in Safari.
Click Networking, then IPv4 Configuration.
Set the IP Preferred Address Method to Manual.
Increase the last set of numbers by 50.
Subnet Mask should be 255.255.255.0.
Default Gateway will be your router's I.P address.
Click Network Identification on the left.
Under DNS Primary (IPv4) enter 209.244.0.3 and for Secondary (IPv4) enter 209.244.0.4.
Click Apply and then power the printer off and then on.
Try now to enable the Web Services.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

Can not set up Web Service datastore using HTTPS WSDL DS 4.1

I have been trying to configure a Web services data store to connect to an HTTPS Wsdl file
Here is some background.
DS Version: 14.1.1.210
Job Server Windows 2008
if i configure the datastore and leave the field for Keystore path empty, i get the following error:
Error loading [https://stgbbaaviation.taleo.net/enterprise/soap?ServiceName=CorporateRecruitmentSourceService&wsdl]:
org.apache.xmlbeans.XmlException: java.io.IOException: Server returned HTTP response code: 401 for URL: https://stgbbaaviation.taleo.net/enterprise/soap?ServiceName=CorporateRecruitmentSourceService&wsdl
If i put the path C:\Program Files (x86)\SAP BusinessObjects\Data Services\ssl\mds\DSJavaKeyStore.keystore for the keystone path,
I get the following different error:
An error ocurred while importing metadata: WSDLException: faultCode=OTHER_ERROR: Unable to resolve imported document at 'https://stgbbaaviation.taleo.net/enterprise/soap?ServiceName=CandidateService&wsdl':javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building faild: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target (BODI-1111469) (BODI-1112446)
I have recreated the DSJavaKeyStore.keystore and added in additional certificates but nothing seems to work.
As a workaround i saved the wsdl file down to the local machine (I'm currently running designer on the job server machine)
i can then save the web service datastore and import the wsdl function. but at runtime I get the following error:
There is no response for the web service <getMessageByIdentifier>. Ensure that the network, web server, and service are running
properly. Also ensure that the service client call time out is set properly.
I have edited the
C:\Program Files (x86)\SAP BusinessObjects\Data Services\ext\webservice-c\axis2.xml file as follows for the sections that are listed in the documentation:
    <transportReceiver name="https" class="axis2_http_receiver">
        <parameter name="port" locked="false">6060</parameter>
        <parameter name="exposeHeaders" locked="true">false</parameter>
    </transportReceiver>

    <transportSender name="https" class="axis2_http_sender">
        <parameter name="PROTOCOL" locked="false">HTTP/1.1</parameter>
        <parameter name="xml-declaration" insert="false"/>
    </transportSender>
    <parameter name="SERVER_CERT">C:\Program Files (x86)\SAP BusinessObjects\Data Services\ssl\server\DS_server_cert.crt</parameter>
    <parameter name="KEY_FILE">C:\Program Files (x86)\SAP BusinessObjects\Data Services\ssl\server\DS_server_privatekey.pem</parameter>
    <parameter name="SSL_PASSPHRASE">C:\Program Files (x86)\SAP BusinessObjects\Data Services\ssl\server\DS_server_privatekey_password.txt</parameter>
I'm not sure what i'm doing wrong. Not much detail in the documentation on what to enter for the Keystore path in the Datastore config.
also it is unclear if i don't have the correct certifications added to the keystore.
Please help

Hi Prashant,
Please refer the below KBA related to BODI-1111469 issue in SAP Data Services 4.1 Support Pack 1 Patch 1 (Version 14.1.1.284).
ADAPT01664699
An importing operation from a WSDL that has a recursive import of a schema would fail with the error: "An error occurred while importing metadata: Unknown JNI error... (BODI-1111469)”. This issue has been fixed in this release.
1804623 - Release Notes for SAP BusinessObjects Data Services 4.1 Support Pack 1 Patch 1 (Version 14.1.1.284)
https://service.sap.com/sap/support/notes/1804623
Thanks,
Daya

P1102w cannot enable "HP WEB SERVICES" for sprintConnection error" check

I have a new printer which works fine for wifi printing but I'd like to use web printing which I beleive is called eprint.
I printed the configuration page and my firmware is 20120814
I cannot see were my printers email address is.
I navigated to the printers url and clicked on the tab "hp web services" and clicked on the green button enable but I keep getting the following error message.
"connection error: check internet connection"
From the router I can see that both the laptop and printer are on the same network 192.168.0.??
Can you please advise I suspect I have a fault on the printer but cannot be certain what can I do, I have updated the software on my mac which is running mavericks 10.9.2 , I've even hit the update software and there is no further updates available whch should mean I have the latest software and firmware for the printer.
Please advise how I may overcome the error when there clearly is no network issue as I can get to the printer to print and go to its web pages without any issues at all?

Hi paz_egap,
Thank you for the thorough response, I appreciate it.
Since you have set a static ip with manual DNS servers and you are still cannot enabled the web services is the firmware up-to-date on the printer. Please follow the steps in Getting the Firmware and Product Updates. Once the firmware is current and the printer still has its manual ip address and manual DNS servers you should be okay to enabled the web services on the printer.
If you are still having an issue after completing the above please call HP’s Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region please click here to find the Technical Support number for your country/region.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Cannot enable HP Web Services: "Connection error. Check Internet connection."

Hello,
I have a problem with LaserJet setup using Wi-Fi network from windows 7 and 8. The problem as far as I understand is due to inaccessible HP Web Services.
Details:
1, The printer works good by USB.
2. The printer is correctly configured to use Wi-Fi router with right password.
3. It can be successfully ping'ed from Windows
4. In Web browser I can enter on printer's IP
(Serial Numbers are hidden as you recommend, firmware updated)
4. But when I try to Enable HP Web Services, an error message appears:
which is strange, because the printer is connected to the same router as the computers and other devices with automatic configuration (and internet is available without any proxy when I am typing this message):
Please help to resolve this issue.
Thanks,
Fedor

Thanks for clarifying Fedor,
HP Web Services are not related to the pritner installation over the local network, those are two different features.
However that may indicate a nework issue.
First try running the HP Print & Scan Doctor below on one of your PCs:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/p...
Does the tool can see your printer throught eh local network?
By clicking the top Network menu and Troubleshoot Firewall, what Firewall software is detected on your system?
Try disabling it and check if that may help.
From teh top Network menu select Show Advanced Information.
What is the IP address of your PC?
I also suggest rebooting the router by unplugging its power for a moment, then reboot the printer and try installing it again.
If the issue persists, what is your router model?
May you see any difference by connecting the printer to your router with an Ethernet cable?
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

B110a Trying to enable the Web Services Error message received

I am trying enabled the Web Services but I get the Error Message 'There was a problem connecting to the Server"
I get the same when I try to update the firmware but the printer is connect to a wireless network with internet connection and no firewall.

Hi Confused_Techie, Hope you are doing well and having a great day;
I will first try using the Network diagnostic utility.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/n...
Hope this can identify and solve the issue for you.
If not than please include the operating system you are using and the build of the Operating system i.e. Win 7 sp1 64 bits. As well as router you are using. Also please take the time to add as much information that you may consider relevant. This will give you a better chance of getting an answer from not just me but other member of the community as well.
Cheers;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Help! Getting "Connection error Check connection" when trying to enable HP Web Services on M1536DNF

Can anyone tell me what I need to do in order to enable HP Web Services on HP LaserJet Pro M1536DNF model? Everything works fine and shows it's connected to the network but I cannot enable HP Web Services. It says "Connection error Check connection" I've tried restarting everything; network, printer, computer. I've also updated firmware to latest version as well.

Hi snapry,
Welcome to the HP Support forums. I understand that you are getting an unable to connect message when trying to enable the web services for your Laserjet CP1025nw printer.
Please set a manual IP address and manual DNS servers for the printer. The instructions can be found in the document Printer Does Not Maintain Wireless Connection. There is a Windows section and a Mac section. In the Windows section you will find the instructions in the sub-section titled “Solution three: Assign the printer a static IP address”. For Mac the applicable sub-section is titled “Solution two: Assign the printer a static IP address”. When entering the information for the Manual Preferred DNS server please use 8.8.8.8 and for the Alternate Preferred DNS server please use 8.8.4.4. These are Google’s DNS servers.
After setting the manual IP address and manual DNS servers, you should have no problems enabling the web services.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Enabling OBIEE web Services for Metadata manager

Hi All,
We are trying to connect from Informatica metadata manager to OBIEE, and one of the pre requisite says we have to enable OBIEE web services. Please help on how I can enable the web services.
Thanks for your time and help.

You will have to include the servlet(SPML Handler) in your web.xml.

How can I call a web service using JAVAscript in LCD

hi guys,
I know it can call a WSDL in LCD, but I have not any WSDL web service , and I have a REST web service ,how can I call this REST web service in LCD? I checked some documents and found nothing...if it's possible that it can call a REST web service using JAVAScript code, I mean I can program some code to call this web service ?
thanks,
Jesse

Hi Jesse,
You can do GET, PUT and POST using FormCalc, so you should be able to access a REST web service.
There is a example of accessing a RSS feed in this thread, http://forums.adobe.com/message/5695433#5695433
Regards
Bruce

Can't setup ePrint / Web Services on a new HP 8600 Pro Plus Wireless Printer

I just purchased a new HP Officejet Pro 8600 Plus All in one printer. I setup the printer on my home wireless network and it prints great. I am now trying to setup ePrint and when I go through the option to setup the Web Services /ePrint function on the Printer or via the web application for the printer I get the following error:
"Cannot connect to the server.
Check the Internet connection and try again. Or contact your system administrator or the person who set up the printer. If your network requires a proxy server address to connect to Internet, click Enter Proxy or check your browser settings."
My primary PC is running Windows 7 Home Premium with Svc Pac 1, 64 bit
My home network is set for DHCP and I do not have a Proxy Server setup but the Web Services setup page is asking for a Proxy Server an Port.
I have already established a ePrint ID but cannot complete the process until I can get the Printer Web Services setup process to complete.
Any suggestions?
This question was solved.
View Solution.

HI Adrianf;
Hope you are doing well,welcome to the community,
I wil take several steps to make sure they are not causing the issue,
Try this tool Click here
I will also set an static ipaddress for my printer and change the DNS servers provided by your ISP to Google DNS servers
How to set an static IP address
Follow these steps to assign an unchanging static IP address to the product through the Embedded Web Server (EWS).
Open a new Web browser window.
Type the IP address located on the Network Configuration Page in the address bar of the Web browser, using http:// to begin the address e.g. http://192.168.0.1 Then press Enter . The EWS home page for the product opens.
In the EWS screen, click the Network tab.
Click Wired (802.3) , and then click the IPv4 Configuration or the IPv6 Configuration tab.
Click Manual IP . The Manual IP Address box opens.
In the Manual IP Address box, type an IP address with the same values in the first three sets of digits (subnet values) as the product's IP address (listed on the Network Configuration Page), and a higher value (between 1 and 254) in the fourth set of digits. This creates a static IP address on the same subnet, but outside the Dynamic Host Configuration Protocol (DHCP) range.
For example, if the product's original IP address is 192.168.0.1 , assign the static IP address to 192.168.0.200 .
NOTE:
Do not type the static IP address use as the example. Enter a static IP address based on the IP address for your product. This can be found on network configuration page.
Enter the Subnet Mask and the Default Gateway settings as they appear on the Network Configuration Page.
Click OK to save the new settings, and then click Exit or close the browser to exit the EWS.
While you are here in the IPV4 you can set the DNS servers of google instead of the DNS servers provided by your ISP just change the option of automaticly select DNS server and use this;
DNS servers of google are 8.8.8.8 and alternative DNS 8.8.4.4
Make sure that the operating system is updated, that the routers firware is the lastest.
Hope it helps and best of luck;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

How can I invoke the web service manually in websphere?

Hi
I've developed a webservice application using Rational Application Developer (RAD). I deployed it in a websphere 6.1 application server, using the administration console to import the war file that I had previously exported with RAD.
My webservice application is listed in the "Enterprise Applications" section of websphere's administration console as started.
My question is: how can I invoke the web service manually? Is there some kind of websphere generated webpage that I can use to call it manually?
I tried http://<server:port>/<contextroot> and http://<server:port>/<contextroot>/<servicename> in a webbrowser, but it doesn't work. Is it possible to invoke the web service manually, or do I need to develop a client?
Thanks in advance
Pedro

Hi Bo Wang,
    Go to the Portal -> System Administration -> System Configuration
                           -> Portal Content folder
                           -> Open Visual Composer folder
    There you can see the Webservice Systems you have created through VC.
You can delete the unwanted system here.
Regards,
Shemim

Can't setup the Web Services as printer says "cannot connect to the server to get the update"

Just purchased and am setting up my HP Officejet pro 8600. It has set-up wirelessly without a hitch until I tried to install/enable the web services and I continue to get a message saying "the printer could not connect to the server" therefore it cannot check for an update on Web Services apps and they will not be enabled. Never had so much trouble setting up an HP printer in the past. Looks like this web services is more of a headache and a gimmick to sell this printer.

Hi Guys,
I found the solution after 2 days.
Open internet explorer and type in the IP address of the printer in the address bar then press enter.
The embedded web server of the printer should pull up.
C. Click the network tab near the top.
On the left side, click IPv4 under your connection type, wireless or wired.
D. Change the IP address from automatic to manual.
Enter the same IP address, default gateway, and subnet mask.
Enter 8.8.8.8 for the primary dns and 8.8.4.4 for the secondary then click apply.
E. After the apply button has been clicked to apply the static IP settings, enable Web Services.
Good luck

How can i use the web services

i have a web service ,but what is need that can i use the web services?
is only then oc4j,or anything?

You need to write a client that will access the Web service and invoke it.
You can write the client in Java for example - and JDeveloper provides wizards for this.
There is a sample in the JDeveloper Reviewer guide here:
http://www.oracle.com/technology/products/jdev/collateral/papers/10g/reviewer/reviewerguide.html

Can we enable costing to Service items?

Hi!
Can we enable costing to Service items? If so, if I entered a Service item into a Sales order line, will it also be included in the COGS Recognition?
Thanks.

press your home button for a few seconds until you hear the beep and ask siri to calla contact that is listed in your contact app.

Where can I down a web service example of jbuilder?

Where can I down a web service example of jbuilder?
I find everywhere, most is by .net.
Can you give me a example !

Hi
first you go through this site http://www.service-architecture.com/
this has very good description and illustrate the what are the prerequisites of service oriented architecture.
web service is a connection technlogy in this we are using WSDS for describing the webservice,UDDI for register or publish web service and SOAP
regarding web service ie., SOA you have any queries feel free make a mail
regards
[email protected]

I can't use "Import Web Service".

Hi, I can't use "Import Web Service" in LabVIEW Web UI builder.
I write IP:8080 and click on Connect.
And it says "No Web ervices found on the server".
Please help.

I think I'm one step from finished application.
So ... I've tried this building web service from tutorial and when I'm on the step when I have to deploy a Web Service to the Web Server I have a problem.
I rightclick on My Web Service under "build specifications" and click to deploy and I get this message in attachment.
My question is how can I start the web server ?
Thanks in advance and I hope that after solving this I won't bother any of you anymore.
Attachments:
problem.JPG ‏99 KB

M251n can't enable hp web services

Similar Messages

Maybe you are looking for