M2727nf_duplex printing using Tray-2 does not work

My laserjet M2727nf has been working fine for the last 5 years.  However, after I upgraded to Yosemite (Mac OSX 10.10) recently, duplex printing gives me strange problems.
a. Duplex printing from Tray 1 works fine, however,
b. With tray 2, when I choose duplex printing option,  first it prints the page#2, and  then it prints the  page#1 on a different paper.  Also while printing the page#1 on a 2nd paper, it mimicks (rotates the paper) as if it's prinitng page # 2 again.  But effectively, it does not print both pages on one paper, but it prints two pages on 2 papers.
I tried several solutions usch as installing the new HP mac driver 3.0 again, and removing all the presets again creating the new ones. However, none of these measures have not solved my problem.
Any help in this regard is sincerely appreciated.
best
ravi

Hi @kots 
I suspect your question would be better answered in the HP Enterprise Business Community, as your HP Printer is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP LaserJet M2727 Multifunction Printer series page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Similar Messages

  • Print icon on toolbar does not work

    Recently bought new computer running W7
    Use acrobat to print postage labels on royal mail site
    Have latest version of acrobat and when screen comes up showing label to be printed the 'floating' toobar appears but clicking on print icon has no effect
    I am forced to used 'CTRL P' and then 'enter'
    Occasionaly CTRL P gives me another toolbar at the top of the window which also has a print icon, this does nothing either
    Can anyone suggest what is going wrong, should I go back to an earlier acrobat that worked fine on my old XP PC ?
    Thanks
    Graham

    Thank you
    Yes you are correct using a PDF in browser to print post labels.
    Running Windows 7, Internet explorer 9, Acrobat Reader Version 10.0
    CTRL P brings up dialog box OK and I can print from there.
    Cannot comment if problem happens outside of browser as it is home
    computer and do not have need to view PDF's offline but will find thsi
    out if important.
    Graham
    >--Original Message--
    >From: [email protected]
    >Date: 23/02/2012 13:18
    >To: "flat-pack"<[email protected]>
    >Subj: Print icon on toolbar does not work
    >HitenderPrakash [http://forums.adobe.com/people/HitenderPrakash
    created the discussion
    >"Re: Print icon on toolbar does not work"
    >To view the discussion, visit: http://forums.adobe.com/message/4224450#4224450

  • HP Officejet Pro L7590 Printer - HP Solution Center does not work

    I am not able to get the Solution Center suite to work because the installation has an error.  I am using Windows 7 Home Premium.  The printer I am installing is the HP Officejet Pro L7590.
    If I go to Devices and Printers and add the printer.  The driver Windows 7 driver would work, it would detect the printer and the test page and everything would be fine. 
    However, if I install using the software provided by HP for the L7590 it would result in an error and it would not work. 
    The failed driver installation is only from installing the full bundle software provided by HP, if by itself through Windows 7 it would be fine.
    Because of the failed installation using HP software the HP solution center does not work.
    In Devices and Printers, the printer has the yellow exclamation point requiring troubleshooting, I click on troubleshoot and no device drivers were found.  In addition, I could not remove the printer.  Before installing the HP software, I could successfully install the printer and there would be a green checkmark, and there would be an option to remove the printer.  This leads me to believe HP has a faulty software bug that is causing the error.
    I am suppose to use the HP add a printer shortcut that populated on my desktop after installing the software, the first time it would show the failure to successfully install the driver, afterwards it would not even detect my printer if it is plugged in.  If I remove the usb and reinsert it, the Windows would just show the failed driver.  I repeat, it failed after I install the software, it works fine without.  The primary reason I want the software is to use the scanning feature.

    Hello NickRT, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are having software installation issues.  i would like to try and assist you.
    I would suggest Uninstalling the Printer Software.
    Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration.  You can do so by following this document: How to perform a clean boot in Windows.
    Once the computer is in clean boot mode, I would reinstalling the HP Officejet Pro Full Feature Software and Driver.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Printing the document grid does not work

    Hi,
    I got here a lot of master documents. The design is built with a squre document grid. I need to print or export it as PDF. But activating the checkbox does not work. Is it possible to print it? Ruler guides and the base grid are working. But I need to print the document grid.
    Is there any possiblility to to this?
    Thanks
    DerSiedler

    Printing the document grid is not an option, but you might be able to work around it by creating your own grid using Layout > Create Guides... then printing the visible guides.
    I'd do that on a separate layer. If you want  the grid, but not other guide, make a real grid with colored strokes using step and repeat, again on a separate layer.

  • CWA using customized portal does not work IPAD 2

    Hi all,
    I have another interesting case that I have been testing for more than a month but it is not working. Cisco provides templates to create the customized portals for LWA or CWA. However, Success Page HTML does not work on LWA and Cisco ISE uses internal default success page.
    On my specific case, we need to move from LWA to CWA in order to minimize the number of redirections and the customized portal for login and AUP work fine BUT when the SUCCESS PAGE is presented on the IPAD, the button on the top right corner never changes from CANCEL to DONE even though the Authentication is successful. We modified multiple times the HTML Files following Cisco Templates and the following link (which looks like has an error) with the same incorrect behavior. Only works if I click the go back arrow on the IPAD so I move back to the AUP page (not an acceptable workaround).
    Reference Link:
    http://www.cisco.com/c/dam/en/us/td/docs/security/ise/how_to/HowTo-42-Customize_ISE12_Web_Portals.pdf
    In the link, Cisco mentions version 1.2.0.899 patch 8 as the version to be used on the ISE devices running the customized templates. However, we recently moved from 1.1.3.124 to 1.2.1.198 patch 3. I created a brand new VM running 1.2.1.198 patch 3, imported the cisco templates for login, AUP, success and error and I am still getting the same problem on IPAD 2 for SUCCESS PAGE even though I am using Cisco Templates.
    I could give a try configuring another VM running 1.2.0.899 patch 8 and use the Cisco templates + IPAD 2 but that is not a good solution.
    Have anyone experienced the same problem?
    thanks

    I opened a case with Cisco TAC, let's see what happens. In the meantime, I created a VM ISE which will be running 1.2.0.899 patch 8 so I will upload the Cisco HTML Files on it and see it this option works properly on IPAD 2, IPAD 4, Chromebook, Win 7 and Samsung Tablets.

  • NI Volumetrix used in FCP does not work as in Motion

    Hi,
    Recently I purchased NI Glow and Zoom filters and created my title within Apple Motion and tried to use in both ways either as Master Template or as Motion file adding in the FCP TL.
    It works fine in Motion and strange in FCP. Now when contacted NI they say to use as Nest -- here bit confused. I can understand the nesting probably means to create another alayer and place the filter in.
    But I look forward to see some expert inputs from anyone of you who has already used this -- please.
    My second problem is: I am unable to get the audio used in the Motion within FCP. Here also I tried both way 1. Creating a temple and used as master template withing FCP and 2. Use as Motion file -- either way Audio is missing in FCP. But, audio plays when browsing the Master template within FCP.

    I think in this instance "nest in Motion" = bake.
    Like those old cooking shows where you are making a pie, let's say it's an Apple pie for the sake of explaination. The chef, Steve Jobs,  Certified, or what have you shows you how to make the Apple pie then throws it in the oven and a few seconds later "bam" I mean "boom" or whatever it is SJ says @ keynote the Apple pie is taken out of the oven all cooked and ready-to-eat. In Motion you bake by creating your animation, exporting as QT then importing that QT into FCP. You don't have all the meat-and-potatoes of the Motion project file you just have the baked Apple pie err... QT movie
    Reason why third party plug in filter *made for Motion(?) does not work in FCP could be anyone's guess. You asked manufacturers' advice and they told you to bake so they most likely don't even know what's up.
    Not a "BUG" that a Motion project (not Motion+Audio as the name implies, mind you) does not include audio in the project file. It's the nature of the beast. It's made for Motion gfx not motion/audio mix.

  • Output Tray 2 does not work when we print a smartforms document immediately

    Dear printer specialists,
    we've the following issue:
    We are printing the same smartforms document in different plants. One plant decided to get the print output into output tray 2 of the printer (lower tray), so we've copied the standard device type into a z-device type and made the SPAD set-up with a preselection for the tray 2 (lower tray). The new device type has been assigned to the output device. Now we made a test and released the print-output for an immediate printing. The output was printed as before in tray 1 (upper tray). When we restart the output from the spool (SP01), the output will be printed in tray 2. Why does this not work, when we print immediately ? Does anyone know how to solve this problem ? (We don't want to change the smartforms document.)
    Thany you for every information to solve this problem.
    Kind regards, Wolfgang

    HI,
    Check if there is a different tra setting in the smartform itself.
    /nsmartforms -> <Form> -> Pages and Windows -> FIRST, NEXT, TERMCOND -> field Resource Name
    Regards,
    Aidan

  • Print range with JavaScript does not work on Mac

    Problem: I am using this.print({bUI: true, nStart: 1, nEnd: 2, bSilent: false}); to print a range of pages. Works perfectly on Reader 8 and 9 and AcroPro 8 in Windows XP. Works in AcroPro 8 on OSX 10.4 but not in Reader 8.1.2 or 9 in 10.4 or Leopard.
    What happens: the print dialogue opens, the range is selected correctly and the pages radio button is selected, but the preview shows the first page, and clicking to print prints the whole document.
    Workaround: making any change - even adding and deleting a space - to the print range in the print dialogue immediately causes the preview to switch to the desired pages, and the range now prints as desired.
    Have submitted this as a bug, but wondered if there is another way to do this from a button, as we're on a deadline.
    Thanks

    See this: http://windows.microsoft.com/en-US/windows-vista/Take-a-screen-capture-print-screen
    OR http://www.sevenforums.com/general-discussion/75540-print-screen.html
    Granted this is not directly for Windows 8 but give it a try.
    {---------- Please click the "Thumbs Up" to say thanks for helping.
    Please click "Accept As Solution" if my help has solved your problem. ----------}
    This is a user supported forum. I am a volunteer and I do not work for HP.

  • Cannot print in Adobe 9 it will only print to file which does not work

    I cannot print a PDF file that is in Adobe 9.  It is not the file, I opened several other files and they all do the same thing.  INstead of printing.  When I click OK after choosing the printer, it goes into a print to file mode.  The print to file always fails and then it will nto print.  This morning it was working fine.  Now it will not print. It may have installed an update to Adobe 9, I do not remember it being 9 before.   I am in trouble if I cannot print tonight.  Any ideas?

    WHat is a "print dialogue?n  How can I find it"  There is nothing that I can find called print dialogue.
    Where do nI find "print to file in order to disable it?

  • In LabVIEW OI the Run Selected Step Using Test UUTs does not work

    TestStand LabVIEW Operator Interface (old style) - TestStand Version 2.0.1 & 3.0
    The Interactive option was enabled for the Process Model Entry Point - Test UUTs in the SequentialModel.seq.
    When selective steps were selected to run within the LV OI using the menu item 'Run Selected Step Using - Test UUTs' it was found not to work.
    The reason for it not working was because the main event string was "Run Selected Step 0" but this isn't available in the case statement. Changing the "Run Selected Step 1".."Run Selected Step 9999" to "Run Selected Step 0".. didn't produced the desired result. Instead of the selected steps running using the entry point Test UUTs, the steps ran without the process model.
    The Case Statement string was retored back to "Run Selected Step 1".
    The changes that are required to make the "Run Selected Step 1".."Run Selected Step 9999" work with either of the Entry Points are as follow.
    In the VI TestStand - Create Entry Point Menus for Interactive Exec.vi
    Insert an Increment from the iteration terminal of the FOR loop. This ensures the Message Queue string generated is in the range 1 - 9999 not 0 - 9999.
    In the TestStand - Sequence Display.vi
    For the Main Message Event "Run Selected Steps", "Run Selected Step 1".."Run Selected Step 9999"
    In the case "1, Default", decrement the input 'Entry Point Index' to the VI TestStand - Start Interactive Entry Point Execution.vi. This ensures the Entry Point Index starts from the value 0.
    Now when the selected steps are run using a Pocess Model Entry Point, they run correctly.
    This problem only appears to affect the LabVIEW Operator Interface and only the old style. The new style that comes with TestStand 3.0 runs correctly.
    There is one other problem. When an Operator is logged in to TestStand, the Entry Point - 'Single Pass' is disabled. But this is not reflected to the menu item 'Run Selected Step Using'. Both 'Test UUTs' and 'Single Pass' are available to the operator.
    The reason for this is because in the VI 'TestStand - Create Entry Point Menus for Interactive Exec.vi' the sub menu item is enabled as a result from the property Sequence.AllowInteractiveExecutionOfEntryPoint. This is not enough to disable the 'Single Pass'. The Engine.CurrentUserHasPrivilege needs to be checked as well. Which means modications to the VI 'TestStand - Create Entry Point Menus for Interactive Exec.vi'.
    Hope is maybe of help to anyone that may need to use this option.
    Regards
    Ray Farmer
    Regards
    Ray Farmer
    Attachments:
    In_Labview_OI_-_Run_Selected_Steps_Using_Test_UUTs_doesnt_work.txt ‏3 KB

    Thanks Ray for the "heads-up". )
    I am about to implement a vi which calls TestStand functions. This vi will allow to select tests and permits test re-entry (loops) if the user has supervisor privileges.
    I will consider what you recommend in this string.
    I will also provide feedback on this thread if I discover anything .... let's say "unusual"..
    On another note, I am using TestStand 3.0 I have not observed any problems when running selected steps or run selected steps using single pass. I have also within TestStand set privileges for certain Operators to do the same. They have not reported any problems.
    Thanks,
    JLV

  • Satellite L300D-202: Restore using Recovery disk does not work

    Good Afternoon,
    Wonder if anyone can shed some light on the following error message I get when trying to restore my laptop...
    "Setting access permissions V:\HDDRecovery...
    V:\HDDRecovery The system cannot find the file specified
    Unpack WinRE...
    ImageX Tool for Windows
    Copyright Blah.....
    Error Opening file [V:\HDDRecovery\SWImg\06546XSP.svml
    ERROR: ImageX could not apply WinRE V:\HDDRecovery\SWImg\06546XSP.svm Index 1 from HDD to W:!
    Press any key to continue..."
    After this I am left with the Toshiba recovery software running with no action and an Active DOS screen but nothing happening...
    I'm guessing HD fault, Recovery media received today from Toshiba for this system
    Laptop is:
    Satellite L300D 202
    NB. If i restart the laptop boots so far and displays BOOTMGR is missing Ctrl Alt Del to restart...
    All help much appreciated,
    Thanks in advance,
    Rick0684

    > NB. If i restart the laptop boots so far and displays BOOTMGR is missing Ctrl Alt Del to restart...
    Hmm... for me it looks like the notebook does not boot from the disk (DVD) but it tries to boot from the HDD....
    Anyway, did you try to boot from another disks; for example Win XP, Linux Live CD?
    Do this and check if this is possible... if yes, format the HDD and try to boot from the recovery disk again!
    PS: Did you try an HDD recovery option?
    Power up the unit, press F8 and in choose Repair my Computer
    After that choose Toshiba HDD recovery option if possible.

  • Printing from iphone/ipad does not work after ios5 upgrade

    have a Brother HL-2140 that would print and show up as the "printer" when printing from an iPhone/iPad thru an Airport Extreme. Everything worked fine till upgrading to ios5 ... now the option for printing is replaced with an "no airprint printer found" ... meanwhile I can still print through the network wirelessly through multiple MacBook Pros and MacBooks around the house. I have re-installed the driver from the Bother website ... I have the Printer Sharing on ... the network allows wireless printing from laptops ... just NOT from iPhones and iPads.

    Today's iOS 6.1 update fixed the printer problem.

  • Printing via Airport Express does not Work

    I have been using an Airport Express Basestation with my Mac Mini and Epson Stylus 880 for about a year without a problem. Now I have moved to an Intel iMac and cannot print via Airport anymore. The file get´s spooled but then I get an error message saying that the printer driver might be incompatible. If I use the same driver with the local USB port everythings works fine.
    Please help,
    Ingo

    Ingo,
    try this link:
    <http://discussions.apple.com/message.jspa?messageID=1674987#1674987>
    Deivy

  • Finger print sign in option does not work

    I am trying to set up a sign in on my profile to use my finger prints. When I try to scan my fingerprints, I get the message,
    'Fingerprint sign on is disable. Contact system administrator.' I am the system administrator according to my account. How do I fix this?

    Is it a Desktop or a Laptop?Which model are you using?
    Ensure your finger is at the same angle as it was during enrollment. Even moderate changes in finger angle during swipe can cause the error.
    Delete and recreate fingerprints.
    Enter the BIOS and Clear Fingerprints data from BIOS.
    Uninstall and reinstall software
    S.Sengupta, Windows Entertainment and Connected Home MVP

  • I have a HP printer 8600 and airport extreme -- want to print from two computers - does not work

    I just bought HP 8600 -- run Lion -- have airport extreme want to print wirelessly from both computers won't work 

    How are you trying to connect the printer - wirelessly or Ethernet or USB to the Airport?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

Maybe you are looking for