M276nw scanner not discovered in mac os 10.9

We bougth a M276nw MFP that is not being discovered as a scanner on MAC 10.9. Several things have been done with out resolving the probem.
1. Reset the print system
2. Reinstall latest drivers: HP-LaserJet-SW-OSX-Mavericks_v12.34.45
But scanner stil not beng discovered.
This question was solved.
View Solution.

There is no mac filtering, there has never been firewall in the middle of my mac and the printer.
As it works flawlessly on windows, I can send you access instructions by teamviewer so you can take a look:
Espinal-MBAir:~ jespinal$ ifconfig en0
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
   ether 98:fe:94:47:a8:d4
   inet6 fe80::9afe:94ff:fe47:a8d4%en0 prefixlen 64 scopeid 0x4
   inet 192.168.1.50 netmask 0xffffff00 broadcast 192.168.1.255
   nd6 options=1<PERFORMNUD>
   media: autoselect
   status: active
Espinal-MBAir:~ jespinal$ ping 192.168.1.7
PING 192.168.1.7 (192.168.1.7): 56 data bytes
64 bytes from 192.168.1.7: icmp_seq=0 ttl=255 time=41.390 ms
64 bytes from 192.168.1.7: icmp_seq=1 ttl=255 time=2.305 ms
64 bytes from 192.168.1.7: icmp_seq=2 ttl=255 time=2.176 ms
64 bytes from 192.168.1.7: icmp_seq=3 ttl=255 time=3.518 ms
64 bytes from 192.168.1.7: icmp_seq=4 ttl=255 time=2.286 ms
64 bytes from 192.168.1.7: icmp_seq=5 ttl=255 time=2.170 ms
64 bytes from 192.168.1.7: icmp_seq=6 ttl=255 time=2.387 ms
^C
--- 192.168.1.7 ping statistics ---
7 packets transmitted, 7 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 2.170/8.033/41.390/13.625 ms
http://192.168.1.7 I got:
Resumen de red TCP/IP(v4)
Estado (inal.): Preparada Dirección IPv4: 192.168.1.7 Máscara subred: 255.255.255.0 Puer. enla. pred: 192.168.1.1 IP configurado por: Manual Método de dirección IP preferida: Manual Servidor DHCP/BOOTP: Servidor TFTP: No especificado Servidor WINS: No especificado Dirección DNS preferida: 192.168.1.1 Dirección DNS alternativa: 8.8.8.8
TCP/IP(v6)
Estado (inal.): Preparada Dirección de enlace-local: FE80::E84CFF:FE3E:5C29 Sin estado (de router): No especificado Con estado (de DHCPv6): No especificado
Identificación de red
Nombre de host: NPI607793 Nombre de dominio (IPv4/IPv6): Nombre de dominio (sólo IPv6): Nombre de servicio Bonjour: HP LaserJet 200 colorMFP M276nw (607793) Nombre de dominio Bonjour: NPI607793.local. Servicio de máxima prioridad Bonjour: Impresión IPP
Configuración de red de cable
Estado: No conectada Dirección de hardware: f0:92:1c:60:77:93 Negociación dúplex y veloc. enl.: Automático
Configuración de la red inalámbrica
Estado: Conectada Inalámbrico: Activado Nombre de red (SSID): JE-HOME1 Modo de comunicación: Infraestructura Tipo de autenticación: wpa2-psk Cifrado: tkip+aes Dirección de hardware: 0c:84:dc:3e:5c:29 Direcc. de hardware del punto de acceso: 20:2b:c1:b2:f3:20 Canal: 11 Intensidad de señal: Excelente
Configuración de directa inalámbrica
Estado: Desactivado
SNMP
SNMPv1/v2   Estado: Activado acceso de lectura y escritura   Nombre de comunidad Set: No especificado (de forma predeterminada 'public')   Nombre de comunidad Get: No especificado (de forma predeterminada 'public') SNMPv3   Estado: Desactivado
Syslog
IP del servidor: No especificado Puerto del servidor: 514 Mensajes máximos por minuto: 10 Mensajes máximos con prioridad: 7 Dispositivo: LPR Tipo de conexión del servidor: UDP
Estadísticas de red
Total paquetes recibidos: 4189 Paq. único destinat. recibidos: 2982 Paquetes incorrectos recibidos: 0 Errores de trama recibidos: 0 Total paquetes transmitidos: 1955 Paquetes no enviables: 0 Colisiones de transmisión: 0 Colisiones retraso transm.: 0 Usuarios de impresión WS: 0
Características activadas
IPv4: Activado IPv6: Activado DHCP: Activado BOOTP: Activado AUTOIP: Activado Archivo de configuración TFTP: Activado Configuración del Telnet: Activado DHCPv6: Activado Impresión LPD: Activado Impresión página banner LPD: Activado Impresión FTP: Activado Impresión 9100: Activado Bonjour: Activado IPP: Activado AirPrint: Activado SLP: Activado WS-Discovery: Activado WS-Print: Activado WS-Scan: Activado SNMP: Activado LLMNR: Activado Syslog: Activado Habilitar cumplimiento de DHCPv4 con RFC 4702.: Activado ARP-Ping: Desactivado
Seguridad Contraseña de administrador: No especificado Certificado de la impresora: Instalada Certificado CA: No instalado Forzar HTTPS: Desactivado Lista control de acceso: Desactivado Firewall: Desactivado Autenticación 802.1X: Desactivado Nivel de cifrado 802.1X: Bajo (DES-56-bits, RC4-128-bits o 3DES-168-bits) Error de autentificación: Conectar de todos modos (802.1X conmutación por error) Seguridad de PJL: Desactivado

Similar Messages

Canon scanner not communicating with mac min using OS 10.5.8

I am using a mac mini with OS 10.5.8. I am trying to scan in papers with a Canon Canoscan N1240U. This is the message I am receiving.
     Cannot communicate with canner.
     Cable may be disconnected.
     Check status.
     Scanner driver will be closed.
I have used this scanner before with this mac mini. Any suggestions why this is happening and to correct the issue.

I think you should, if you can, try the scanner on a different computer to rule out a problem with the scanner or it's usb cable. Then, if you have the software install disk for the scanner run it. Or download and install a new driver or software. Use the finder to find and delete any files for the scanner and then reinstall them. set the scanner up in systempreferences as if it's a newly installed item.

HP C7200 printer/scanner not working with Mac after new router installed.

I recently had my DSL modem go out and replaced it with a combo modem/wifi router. Since the install, my mac can't detect my printer. If I install it via the printer's IP, it'll detect ink levels for a day or two, but still won't print, and won't even detect the scanner. It says the printer is off-line when I try to print. I've rebooted everything, reset the printing system, downloaded updates, and downloaded the latest HP software. Nothing helps. So much for "just works".
My little Windows 7 computer was totally trouble-free after I reinstalled the printer.

If the printer does support Bonjour and it does not appear in the Default Add Printer view then I would say that the Mac is set to a different subnet to the printer (and the Win7 PC). This could also explain why you can add the printer via IP but it won't print.
If the Mac is definitely on the same IP subnet as the printer then check you don't have an application running that could block Bonjour.
With regards to IP queues, ensure you select HP Jetdirect rather than the default of IPP (Win7 will be using Jetdirect which is known as Port 9100). Also, some drivers cannot be used with network connections. If the printer supports Postscript then try a Generic Postscript printer to test. If it doesn't support PS but supports PCL then there is a Generic PCL Laser driver you would try.

Canon pixma mp500 scanner not working with mac osx 10.6.8

I'm having difficulty using my scanner. I've updated the Canon driver with the most recent version. It recoginises the printer/scanner but won't import image. Has anyone had a similar issue and successfully resolved it?

duncan, I've got an MX 880 series all in one printer, and have the same issue. A work around that I use is to select "e-mail" the scanned item. The scanned item is then inserted into an e-mail format where I can choose to download/save the scanned document into whatever folder I want. This was the only expedient method I could find. The Canon software capability between some of their newer printers and Mac operating systems is not totally compatible. For example, sometimes the top half of a line of text gets printed on one page, and the bottom half of the line gets printed on the ensuing page. Doesn't happen often, but it is annoying.
Wuz

Canon scanner not recognised after Mac wakes up.

Hi
I have been using a Canon LIDE 60 scanner since I bought my eMac 4 or so years ago. It's always worked fine.
But since upgrading to Leopard a few months ago I've been having trouble with it.
What happens is that after the Mac goes into deep sleep mode (it's set to have the hard drive sleep too) and the scanner is not recognised after the computer wakes up.
I get an error message when I open up a TWAIN program (CanoScan Toolbox or Image Capture) saying that there is no scanner available.
Sometimes, usually actually, if I disconnect the USB cable and then re-attach it the scanner becomes available again. But sometimes not.
I have what I believe to be the most recent driver for this scanner, dl'd recently from Canon's web site. First I uninstalled the old driver and then restaterd my eMac before installing the new driver.
I'm using whatever version of Image Capture came with Mac OS and I'm using CanoScan Toolbox version 4.9.3.4 (version 5.0 does not work at all).
Any way to get this to stop happening?

Bump
Joey Goldstein wrote:
Hi
I have been using a Canon LIDE 60 scanner since I bought my eMac 4 or so years ago. It's always worked fine.
But since upgrading to Leopard a few months ago I've been having trouble with it.
What happens is that after the Mac goes into deep sleep mode (it's set to have the hard drive sleep too) and the scanner is not recognised after the computer wakes up.
I get an error message when I open up a TWAIN program (CanoScan Toolbox or Image Capture) saying that there is no scanner available.
Sometimes, usually actually, if I disconnect the USB cable and then re-attach it the scanner becomes available again. But sometimes not.
I have what I believe to be the most recent driver for this scanner, dl'd recently from Canon's web site. First I uninstalled the old driver and then restaterd my eMac before installing the new driver.
I'm using whatever version of Image Capture came with Mac OS and I'm using CanoScan Toolbox version 4.9.3.4 (version 5.0 does not work at all).
Any way to get this to stop happening?
Message was edited by: Joey Goldstein

Scanner not working w Mac

I am using HP Officejet Printer. The scanner function is not working with my Mac ver V10.9.4. Can you help

Hi,
Please clarify your printer model, there are dozens of different models for that profuct line.
Additionally, what application you are trying to scan from? is it HP Scan, Image Capture? the front panel of the printer?
Finally, is the printer connected to your Mac through a USB or through the network?
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Scanner not scanning with MAC OS X 10.9.4

I cannot scan from my HP Photosmart All In One Scanner, Product #CN731A to my MAC OS X 10.9.4. I also use Safari. Please advise!
Thank you

I just learned how to do this with my HP Photosmart 3310 All-in-One from watching a video on the HP website. I used Image Capture.
Place the item that you want to scan on the scanner glass, or load it into the Automatic Document Feeder (ADF) if your printer has one.
In the Applications folder or from the Dock, click Image Capture .
Select your printer from the list. If your printer connects to a network, select it from the Shared list. The details of the scan display.
Click Show Details to view scan settings and options.
Change any settings as necessary, and then click Scan .

HP Photosmart 2610 scanner not recognized by Mac OSX Mavericks 10.9.2

Is there a problem with the current HP printer/scanner driver for Mavericks?
I have performed software update and when I go to "Printers and Scanners", Mac recognises the printer but when I click the "Open scanner", the scanning window opens but I get an error message saying it can't find the device. I can't even get Preview or Image Capture to recognise the scanner.
Thanks!
This question was solved.
View Solution.

Hi,
Try rebooting your Mac, then try scanning from Image Capture again.
If the same persists, try installing the following package and check if that may help:
http://support.apple.com/kb/dl907
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Bought the Iphone 6 2days ago. My mac pro finds the phone on bluetooth but phone will not discover ANY bluetooth divices. Have hard reset the phone and restarted as well. nothing. Any suggestions or issues. This is the first apple phone I have owne

Bought the Iphone 6 2 days ago. My mac pro finds the phone on bluetooth but phone will not discover ANY bluetooth divices. Have hard reset the phone and restarted as well. nothing. Any suggestions or issues. This is the first apple phone I have owned. Am not very happy that Bluetooth would present a problem.

I can't help with the other devices but note that an iPhone will not pair via Bluetooth to a computer (Mac or Windows) except for personal hotspot and then only if your cellular plan supports it. https://discussions.apple.com/docs/DOC-7722
If you are attempting to use Handoff/Continuity, that does involve Bluetooth but the devices are NOT paired; Bluetooth just needs to be on and the devices in range of each other. The following may help with Handoff/Continuity issues: http://support.apple.com/kb/TS5458

Mac book does not discover itouch in bluetooth

My Macbook does not "discover" my Itouch when I sync with Bluetooth. Both units are up to date and "discoverable."
Thanks in advamce.
JT

The iPod does not contain the BT profiles necessary to pair with a computer. The iPod can pair with headphones, speakers, keyboards (newer iPods), and some other iDevices via apps for some file transfer but mainly for game playing. See the following:
iPhone, iPad, iPod touch: Supported Bluetooth profiles

HP Envy 4500 will not scan to Mac

HP Envy 4500 will not scan to MAC. Printing works just fine but when I try to scan the printer says scanning but never completes the scan, there is no error message. I tried uninstall and reinstall of the software, upgraded to Mac OS Yosemite and tried re-install again, no luck.

Hi @eallen1219
From your description, it soudns like we may be haivng a osftware issue. Let's use the following steps to remove currenlty installed software, clean up the Mac, and reinstall the software again;
Scrub/ Uninstall
Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
Click continue, click on one of the printers in the list.
* Only do this step if you do not have any other HP Printers. Hold down Control, Option and Command, While holding the three buttons down,
Click uninstall.
Reset Printing System
Click the Apple icon (   ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Repair Disk Permissions
On the Dock, click Applications, and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer.
Restart the printer. Now you can download and install the printer software and install it. > HP-ENVY-4500-series_v12.34.0.dmg
When you add the printer, please ensure you are using the HP driver.
Select Add other Printer or Scanner
Select the printer you are adding and next to 'Use' you can the printer driver
Please let me know if you can scan now. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

I am trying to setup my Canon DR-4010C scanner to my office Mac's and cannot find driver software any ideas?

I have multiple i Macs and MacBooks using Lion OX. I.T. tells me that the Cannon DR-4010C is not compatible with Mac's, I find that hard to believe it can't be done.
Help!

Your IT department is correct. Canon never released scanner drivers for Mac OS X for this model. And before someone chips in and says to use Vuescan or SANE, these will not work either.
So, if you must use the Mac's, then your only option would be to install Windows XP, Vista or 7 in a VM or Bootcamp on the Mac.

2014 Macbook Pro 10.9.5 not discovering my iPhone 5s iOS8

Why is Airdrop on my new Macbook Pro 10.9.5 not discovering my iPhone 5s iOS8.0.2
Bluetooth on.
On same wireless home network.
Selected Airdrop to everyone on my iPhone 5s.
Macbook Pro was bought in August still not discovering my iphone. Airdrop icon in Finder just keeps spinning.
I'm signed into my Apple ID on the both devices. My admin login account for my Macbook is also connected to my Apple ID.
If only i could transfer selected photos to my Macbook!
Help!

Hi there Musicoshi,
It looks like this feature will be avlaible in OS X Yosemite later this fall. Take a look at the page below for more information.
Apple - OS X Yosemite - Apps
With AirDrop, sharing ﬁles has never been easier.
AirDrop makes sharing your files between Mac computers simple. And now it works between Mac and iOS, too. So with just a few clicks on your Mac, you can take a file from any folder and use AirDrop to send it to a nearby Mac or iOS device. It’s perfect for, say, sharing a document with a coworker in the next room or sending a presentation to a client across the table.
-Griff W.

HT3669 HP ENVY 4500 e-All-in-One Version 3.2.1 does not work on iMac 20-inch, Mid 2007. Only recognizes scanner not USB printer.

HP ENVY 4500 e-All-in-One Version 3.2.1 does not work on iMac 20-inch, Mid 2007. Only recognizes scanner not USB printer.
I would like to print via the USB connection instead of wireless (the wireless does work, and the scanner works via USB).
I tried connecting the printer directly (via USB) to my MacBook Pro laptop and it worked just fine.
How can I make this printer work on my iMac?
I spent 4 hours on the phone with HP and we did every combination of installation of drivers ad nausum and their bottom line is that it is a Mac problem.
Any help would be appreciated. Will be sending this printer back to Amazon if I can't make it work on the USB.
I am open to questions or suggestions
Thanks,
Chet

After 4 hours on the phone with HP and another hour with Apple (Mavericks support) no real solution other than check everything (removed everything from Login Items, removed all HP software anywhere in the system reboot, reinstall printer) then when nothing worked for the 4500, did an OS Reinstall (boot with CMD+R).
The Mavericks support group did open an incident (# 542875311) and I will update it when I figure out how to find it on the system.
My feel is that the base problem is that somewhere between the HP-Inkjet-SW-OSX-Mavericks_v12.34.49-2 package and the Apple HP Printer software in the Library (version 2.16.1) the app for printing via the USP Port just does not get installed for the mid 2007 20 inch iMac. The scanner is recognized on the USB Port and the Printer works fine on Wi-Fi. I have too many devices to burden my home network with anothe device. Also, every time I put any HP Printer on Wi-Fi, my router (Netgear N600 WNDR3400 running 12 to 20 devices depending on who is home) gets wonky (but that's anothe story...).
Additionally, when I attach the HP Envy 4500 to my MacBook Pro (2010) it works perfect - print and scan via the USB prot and both functions show in the System Preferences - Printers and Scanners just as expected and just as the 3050 does.
Chet

HP Laserjet 3052 Scanner not working

So I upgraded to Leopard and everything seems fine except I cannot run the HP Scan software. The printer [art still works but I just cannot scan. I have tried reinstalling the software but it still not working. HP have no new software and drivers for it yet.
Anyone any ideas?
Thanks,

I can confirm what everybody else in this thread has said and add one detail. I bought an HP 3055 all-in-one yesterday and after installing the software, not only wouldn't it scan ("waiting for PC..." forever) but it also wouldn't print, AND another HP printer elsewhere on my network STOPPED working.
After an hour on the phone with HP support (10 minutes just to register my info), the guy confirmed that there is no 10.5 driver, didn't know when there would be one, and added the following amazing fact. Not only does the software on the CD that comes with the printer/scanner not work with 10.5, it actually BREAKS its printing from Leopard (and similarly the 10.4 or earlier downloadable drivers from hp.com). He claimed that printing from 10.5 works on the 3055 out of the box, but if you are so reckless as to install the software that actually came with the printer, it permanently stops working. (Plus, apparently, stops the printing of other HP devices.)
He went on to say the only fix was to re-install the Mac OS . However, I can report that after un-installing every piece of HP software on my machine (using their uninstallers, not just deleting), then restarting, the printer now works, and so does the other HP printer on the network. (Scanning still doesn't work.)
Btw, echoing other complaints on this thread, the reason I bought a new HP scanner was because my old one had stopped working ever since (I think) 10.4, and I finally gave up.

M276nw scanner not discovered in mac os 10.9

Similar Messages

Maybe you are looking for