M2t HD output file is corrupt
I've been using PE11 and recently, using a HD m2t preset I've used previously with no problems, any m2t file output generated is corrupt upon completion of the encode and won't play in any player or be accepted as input in authoring programs. Unfortunately this is probably a side effect of trying a freeware app called "freevideojoiner" which I purged from my system after only a few uses. I've tried reinstalling PE11 to no avail. I'm on the verge of wiping my system disk and rolling back to a backup image, but I'm hoping other options are available to fix this problem. Any ideas on what do to fix this?
BTW, I did run a full virus scan with Norton and found nothing, and I've yet to experience anything out the ordinary since the purge.
tailspinner
You could use another source of installation files from the following and insert your purchased serial number in them at installation.
http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l
You just have to read and carryout carefully the web site's "Note: Very Important Instructions" in order to avoid an Access Denied Message.
You might want to look at a scheme
Uninstall the usual Control Panel route
Do a free ccleaner run through to get rid of leftovers from incomplete downloads and installs
CCleaner - PC Optimization and Cleaning - Free Download
Reinstall with antivirus and firewall(s) disabled.
Do you have one of these HD m2t files (that could be played back in your player) saved to the computer hard drive?
If so, please determine if what was once OK for playback is still playable. This could put to rest the status of the current HD .m2t
export that you have decided is corrupt.
Looking forward to your follow up.
ATR
Similar Messages
-
When I import my Sony video, which is in m2ts format, the file size is a few times larger. This affects the volume of clips for creating the blu-ray or DVD discs. How can I squeeze the file size without sacrificing the quality of output? Is there any other ways of achieving this?
wongrayd wrote:
Thanks. I do not have the experience on burning discs from iMovie for the movie after editing (ie for video discs players). It seems that i cannot find the relevant command in the tool bar for this purpsoe. Would you please show me the way?
The command is gone because iDVD has been discontinued by Apple. After Apple discontinued iDVD they removed the iDVD burning link from iMovie. I still use iDVD sometimes, only because I have an old copy.
wongrayd wrote:
You have mentioned about Handbrake as a converter. What is the RF no. (under Constant Quality) meant? It seems that the smaller the no. is, the better quality will be. What is the optimal no.? or should we use the Average Bitrate? Again, what is the best rate? Furthermore, which format is more suitable or the best: H264 or mpeg 2/4?
I don't know what RF means. When I have used HandBrake, I've used presets that apply to what I want to do, so I don't know the meaning of each individual setting. However, it appears that many of them are listed in the HandBrake User's Guide that is linked from the Help menu in the program:
https://trac.handbrake.fr/wiki/HandBrakeGuide
wongrayd wrote:
For iMac, except iMovie, what other software is the best for the amateur? I have read Photoshop. Can this support m2ts files and user friendly?
Photoshop is not amateur-level software, and although it can edit a video, it cannot burn a DVD. Unfortunately, because I still use iMovie, I haven't tried anything else. You might want to read the reviews of various DVD-burning applications in the Mac App Store.
And maybe another forum member will jump in and help us here! -
Receiver file adapter corrupting characters
Hi all,
We have an outbound article/material interface from R/3 that goes through XI 3.0 NW04 SP17 to create a flat file. The data contains characters such as and from the Czech Republic character set. As both our R/3 and XI systems are both Unicode, they seem to hold and carry through these characters fine; however, when XI creates the final output file from the message, these characters are corrupted:
túuý
becomes
¹túuý¾
In the receiver communication channel, I have tried all of UTF-8, ISO-8859-1 and ISO-8859-2 file encoding settings. The above example is from the ISO-8859-2 setting. The other two convert the problem characters to question marks ?.
Am I using the incorrect file encoding setting here or is there something else Im doing wrong?
Many thanks,
Stuart RichardsThe file is correct, but when you view the file, you have the wrong codepage.
When your file is ISO-8859-2, then the characters are correct, but when you watch this and your settings are ISO-8859-1, then you see wrong characters.
= ¹
= ¾
Open the file in Internet Explorer and choose the correct codepage, then you see the characters correctly.
Regards
Stefan -
PDF file gets corrupted when generated from BSP
Hi,
I am generating a PDF file from a BSP page ( see the code below). The problem is that PDF file gets corrupted and I am unable to open it. I also tried to use other functions like GUI_Download and DOwnload as suggested by many and they also do not work either. Has any one generated a PDF from BSP and can some one help?
Data: GG type String.
event handler for data retrieval
data : event type ref to cl_htmlb_event.
class cl_htmlb_manager definition load.
class CL_HTTP_RESPONSE DEFINITION LOAD.
DATA : PARAMS TYPE PRI_PARAMS,
VALID TYPE C,
GV_SUCCESS_SPOOL_NO LIKE SY-SPONO.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING DESTINATION = 'LOCL'
COPIES = COUNT
LIST_NAME = 'TEST'
LIST_TEXT = 'Test NEW-PAGE PRINT ON'
IMMEDIATELY = ''
RELEASE = 'X'
NEW_LIST_ID = 'X'
EXPIRATION = DAYS
LINE_SIZE = 140
LINE_COUNT = 23
LAYOUT = 'X_PAPER'
SAP_COVER_PAGE = 'X'
RECEIVER = 'SAP*'
DEPARTMENT = 'System'
NO_DIALOG = 'X'
IMPORTING OUT_PARAMETERS = PARAMS
VALID = VALID.
IF VALID <> SPACE.
NEW-PAGE PRINT ON PARAMETERS PARAMS NO DIALOG.
write :/ 'Hello Message1'.
write :/ 'Hello Message2 '.
NEW-PAGE PRINT OFF .
ENDIF.
data : spool_no TYPE TSP01-RQIDENT .
spool_no = sy-spono.
DATA: itab TYPE TLINE,
witab TYPE TABLE OF TLINE,
output TYPE STRING,
outputx TYPE XSTRING.
data : l_pdf_len type i.
data: mi_bytecount type i.
DATA : APP_TYPE TYPE STRING VALUE 'APPLICATION/PDF' .
DATA: cached_response TYPE ref to if_HTTP_RESPONSE.
data : l_display_url type string .
data : guid type GUID_32 .
call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
SRC_SPOOLID = spool_no
NO_DIALOG = 'X'
IMPORTING
PDF_BYTECOUNT = mi_bytecount
TABLES
PDF = witab
EXCEPTIONS
ERR_NO_ABAP_SPOOLJOB = 1
ERR_NO_SPOOLJOB = 2
ERR_NO_PERMISSION = 3
ERR_CONV_NOT_POSSIBLE = 4
ERR_BAD_DESTDEVICE = 5
USER_CANCELLED = 6
ERR_SPOOLERROR = 7
ERR_TEMSEERROR = 8
ERR_BTCJOB_OPEN_FAILED = 8
ERR_BTCJOB_SUBMIT_FAILED = 9
ERR_BTCJOB_CLOSE_FAILED = 10
others = 11.
if sy-subrc EQ 0.
LOOP AT witab INTO itab.
CONCATENATE
output
itab-tdline
INTO output in character mode.
ENDLOOP.
endif.
CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
EXPORTING
text = output
mimetype = 'APPLICATION/PDF'
IMPORTING
buffer = outputx.
concatenate cl_abap_char_utilities=>byte_order_mark_little
outputx
into outputx in byte mode.
response->set_header_field( name = 'content-type' value =
'APPLICATION/PDF; charset=utf-16le' ).
response->delete_header_field( name =
if_http_header_fields=>cache_control ).
response->delete_header_field( name = if_http_header_fields=>expires
response->delete_header_field( name = if_http_header_fields=>pragma )
response->set_header_field( name = 'content-disposition'
value = 'attachment; filename = TEST.PDF'
l_PDF_len = xstrlen( OUTPUTX ).
response->set_data( data = OUTPUTx
length = l_PDF_len ).
navigation->response_complete( ).
Regards
Amit AgrawalHI Craig Cmehil,
I have tried this code as well as given in the URL specified by you. But using this also browser shows the following content. It seems that PDF content is corrupted.
My Output as shown on Browser Starts below this line----
DF-1.3
%âãÏÓ
2 0 obj
/WinAnsiEncoding
endobj
3 0 obj
<<
/Type /Font
/Subtype /Type1
/BaseFont /Courier
/Name /F001
/Encodg 2 0 R
>>
endobj
4 0 obj
<<
/Length 5 0 R
>>
stream
/F001 7.30 Tf 0 0 0.753 rg BT 18.00 570.65 Td 0 Tw <33302E30362E3230302020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020>Tj ET 0 0 0.753 rg BT 2950 570.65 Td 0 Tw
<20204854545020436F6E74726F6C202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020>Tj ET 0 0 0.753 rg BT 572.40 570.65 Td 0 Tw <2020202020202020202020202031>Tj ET q 0 0 0 RG 0.55 w 18.00 562.90 m
634. 562.90 l S Q 0 0 0.753 rg BT 18.00 551.45 Td 0 Tw <48656C6C6F20416D6974>Tj ET 0 0 0.753 rg BT 18.00 541.85 Td 0 Tw <48656C6C6F204765726176>Tj ET
endstream
endobj
5 0 obj
624
endobj
6 0 obj
<<
/Type /Page
/MediaBox
/Parent 1 0 R
/Resource
<<
/ProcSet
/PDF /Text
/Font
<<
/F001 3 0 R
>>
/XObject
<<
>>
>>
/Contents 4 0 R
>>
endobj
7 0 obj
<<
/Author (AMG )
/CreationDate (20050630 181301)
/Creator (Form X_58_170 EN)
/Producer (SAP R/3 Release 620 )
%SAPinfoStart TOA_DARA
%FUNCTI=( )
%MANDANT=( )
%DEL_DATE=(00000000)
%SAP_OBJECT=( )
%AR_OBJECT=( )
%OBJECT_ID=( )
%FORM_ID=( )
%FORMARCHIV=( )
%RESERVE=( )
%NOTIZ=( )
%SAPinfoEnd TOA_DARA
>>
endobj
1 0 obj
<<
/Type /Pages
/Kids
[ 6 0 R
/Count 1
>>
endobj
8 0 obj<<
/Type /Catalog
/Pages 1 0 R
/PageMode /UseNone
>>
endobj
xref
0 9
0000000000 65535 f
0000001801 00000 n
0000000017 0000n
0000000052 00000 n
0000000157 00000 n
0000000840 00000 n
0000000862 00000 n
0000001048 00000 n
0000001869 00000 n
trailer
/Size 9
/Root 8 0 R
/Info 7 0 R
>>
startxref
1944
%%EOF
Browser Displey Content Ends----
My Coding Starts----
Data: GG type String.
event handler for data retrieval
data : event type ref to cl_htmlb_event.
class cl_htmlb_manager definition load.
class CL_HTTP_RESPONSE DEFINITION LOAD.
DATA : PARAMS TYPE PRI_PARAMS,
VALID TYPE C,
GV_SUCCESS_SPOOL_NO LIKE SY-SPONO.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING DESTINATION = 'LOCL'
COPIES = COUNT
LIST_NAME = 'TEST'
LIST_TEXT = 'Test NEW-PAGE PRINT ON'
IMMEDIATELY = ''
RELEASE = 'X'
NEW_LIST_ID = 'X'
EXPIRATION = DAYS
LINE_SIZE = 140
LINE_COUNT = 23
LAYOUT = 'X_PAPER'
SAP_COVER_PAGE = 'X'
RECEIVER = 'SAP*'
DEPARTMENT = 'System'
NO_DIALOG = 'X'
IMPORTING OUT_PARAMETERS = PARAMS
VALID = VALID.
IF VALID <> SPACE.
NEW-PAGE PRINT ON PARAMETERS PARAMS NO DIALOG.
write :/ 'Hello Amit'.
write :/ 'Hello Gaurav '.
NEW-PAGE PRINT OFF .
ENDIF.
GV_SUCCESS_SPOOL_NO = sy-spono.
data : spool_no TYPE TSP01-RQIDENT .
spool_no = sy-spono.
write: GV_SUCCESS_SPOOL_NO.
*write: spool_no.
IF display_type = 'convertspool'.
DATA: itab TYPE TLINE,
witab TYPE TABLE OF TLINE,
output TYPE STRING,
outputx TYPE XSTRING.
data : l_pdf_len type i.
data: mi_bytecount type i.
DATA : APP_TYPE TYPE STRING VALUE 'APPLICATION/PDF' .
DATA: cached_response TYPE ref to if_HTTP_RESPONSE.
data : l_display_url type string .
data : guid type GUID_32 .
spool_no like TSP01-RQIDENT .
*spool_no = GV_SUCCESS_SPOOL_NO .
call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
SRC_SPOOLID = spool_no
NO_DIALOG = 'X'
IMPORTING
PDF_BYTECOUNT = mi_bytecount
TABLES
PDF = witab
EXCEPTIONS
ERR_NO_ABAP_SPOOLJOB = 1
ERR_NO_SPOOLJOB = 2
ERR_NO_PERMISSION = 3
ERR_CONV_NOT_POSSIBLE = 4
ERR_BAD_DESTDEVICE = 5
USER_CANCELLED = 6
ERR_SPOOLERROR = 7
ERR_TEMSEERROR = 8
ERR_BTCJOB_OPEN_FAILED = 8
ERR_BTCJOB_SUBMIT_FAILED = 9
ERR_BTCJOB_CLOSE_FAILED = 10
others = 11.
if sy-subrc EQ 0.
LOOP AT witab INTO itab.
CONCATENATE
output
itab-tdline
INTO output in character mode.
ENDLOOP.
endif.
*write : output.
CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
EXPORTING
text = output
mimetype = 'APPLICATION/PDF'
IMPORTING
buffer = outputx.
*concatenate cl_abap_char_utilities=>byte_order_mark_little
*outputx
*into outputx in byte mode.
CREATE OBJECT cached_response TYPE CL_HTTP_RESPONSE EXPORTING add_c_msg = 1.
some Browsers have caching problems when loading Excel Format
response->set_header_field( name = 'content-type' value =
'APPLICATION/PDF' ).
response->delete_header_field( name =
if_http_header_fields=>cache_control ).
response->delete_header_field( name = if_http_header_fields=>expires
response->delete_header_field( name = if_http_header_fields=>pragma )
l_pdf_len = xstrlen( outputx ).
cached_response->set_data( data = outputx
length = l_pdf_len ).
cached_response->set_header_field( name = if_http_header_fields=>content_type
value = 'application/pdf' ).
cached_response->set_status( code = 200 reason = 'OK' ).
cached_response->server_cache_expire_rel( expires_rel = 180 ).
CALL FUNCTION 'GUID_CREATE'
IMPORTING
ev_guid_32 = guid.
CONCATENATE runtime->application_url '/' guid '.pdf' INTO l_display_url.
cl_http_server=>server_cache_upload( url = l_display_url
response = cached_response ).
RETURN.
My Coding Ends----
Any Further help on this.
Regards
Amit Agrawal -
ByteArrayInputStream as source for zip file entry corrupts the ByteArray
Hi All,
I have managed to create and add a (in-memory) zip file as an email attachment. I add a file to the zip file , then push data to this file via a ByteArrayInputStream.
Adding the file (created via ByteArrayInputStream) to an email works perfectly. If i then add another step and zip this file it corrupts the output.
It looks like it is turning the carriage return into a [] . Its 'almost right' as when I cut & paste the contents of the txt file i created (from the zip file) into Word it displays correctly, with the carriage returns. Is it some kind of encoding problem, or mime type issue?
My ByteArrayInputStream uses buf.append("\n"); for carriage returns. I think the problem is with
ByteArrayInputStream baIn = new ByteArrayInputStream( getAttachementNoFormat(eq_rt.getStoredProc()) );where I think i need to encode this somehow. Here is the complete code to create and add the zip file to an email. Any isuggestions will be appreciated.
//START of new ZIP code
/* Specify files to be zipped */
// Create temp file.
//File temp = File.createTempFile(fileName, ".txt");
//temp.deleteOnExit();
//BufferedWriter bOut = new BufferedWriter(new FileWriter(temp));
//ByteArrayInputStream baInTemp = new ByteArrayInputStream( getAttachementNoFormat(eq_rt.getStoredProc() ) );
//bOut.write( baInTemp.toString() );
//bOut.close();
String[] filesToZip = new String[3];
filesToZip[0] = "C:\\Program Files\\NetBeans3.6\\firstfile.txt";
filesToZip[1] = "C:\\Program Files\\NetBeans3.6\\secondfile.txt";
filesToZip[2] = "C:\\Program Files\\NetBeans3.6\\thirdfile.txt";
final String fileToZip = fileName;
/* Create a memory buffer to store the ByteArray, fixed size */
byte[] buffer = new byte[18024];
/* Specify zip file name */
String zipFileName= eq_rt.getReportName() + ".zip";
try {
/* Create ZipOutputStream to store the FileOutputStream */
// ZipOutputStream out = new ZipOutputStream(new FileOutputStream(zipFileName));
ByteArrayOutputStream byteArray = new ByteArrayOutputStream();
ZipOutputStream out = new ZipOutputStream(byteArray);
/* Set the compression ratio */
out.setLevel(Deflater.DEFAULT_COMPRESSION);
/* iterate through the array of files, adding each to the zip file */
for (int a = 0; a < filesToZip.length; a++) {
/* Print the filenumber being added to the zip */
System.out.println(a);
/* Associate a file input stream for the current file */
// FileInputStream in = new FileInputStream(filesToZip[a]);
This ROCKS as it is passing a array into the text file .getBytes() seems
to be the KEY in getting ByteArrayInputStream to WORK
//String strSocketInput = "TAIWAN";
//ByteArrayInputStream baIn = new ByteArrayInputStream(strSocketInput.getBytes());
//String strSocketInput = new String (getAttachementNoFormat(eq_rt.getStoredProc()).toString() );
//ByteArrayInputStream baIn = new ByteArrayInputStream( getAttachementNoFormat(eq_rt.getStoredProc()) );
ByteArrayInputStream baIn = new ByteArrayInputStream( getAttachementNoFormat(eq_rt.getStoredProc()) );
//String strSocketInput = "TAIWAN";
//ByteArrayInputStream baIn = new ByteArrayInputStream(strSocketInput.getBytes());
/* Add ZIP entry to output stream. */
out.putNextEntry(new ZipEntry(filesToZip[a]));
/* Transfer bytes from the current file to the ZIP file */
int len;
while ((len = baIn.read(buffer)) > 0)
out.write(buffer, 0, len);
/* Close the current entry */
out.closeEntry();
/* Close the current file input stream */
baIn.close();
/* Close the ZipOutPutStream (very important to close the zip before you attach it to the email) Thanks DrClap */
out.close();
/* Create a datasource for email attachment */
// DataSource sourcezip = new FileDataSource(zipFileName);
DataSource sourcezip = new ByteArrayDataSource(byteArray.toByteArray(), zipFileName, "application/gzip" );
/* Create a new MIME bodypart */
BodyPart attachment = new MimeBodyPart();
attachment.setDataHandler(new DataHandler(sourcezip));
attachment.setFileName(zipFileName);
/* attach the attachemnts to the mail */
multipart.addBodyPart(attachment);
catch (IllegalArgumentException iae) {
iae.printStackTrace();
catch (FileNotFoundException fnfe) {
fnfe.printStackTrace();
catch (IOException ioe)
ioe.printStackTrace();
// End Of New ZIP codeI came up with 'a' solution (not sure if its the best way but appears to work)
\n = corrupt
\r\n = ok in zip -
SDMKIT.JAR The file is corrupt
Hi,
I'm trying to install NW04 SneakPeak Java edition and keep getting this error. I have tried extracting both the files together and into a directory with a small name (c:/nw4) as these seem to be common problems but I still get the same problem, Any suggestions?
! CRC failed in NW04SneakPrevJavaSP11\NWSneakPreviewSP11\SneakPreviewContent\SDM\SDMKIT.JAR. The file is corrupt
Cheers,
PaulI had this same problem. When I was trying to install I would the get the following error at the step "Install Java Engine".
ERROR 2006-12-30 18:10:24
MUT-03011 Execution of the command "C:\j2sdk1.4.2_09\bin\java.exe -classpath C:/DOCUME1/ADMINI1/LOCALS~1/Temp/sapinst_exe.1928.1167518691/JAR/ins-j2ee.jar com.sap.ins.j2ee.JarInfo -u C:/sap/DevWPInstallation\JAVA_EXPORT\SDM/SDMKIT.JAR" finished with return code 3. Output: C:/sap/DevWPInstallation\JAVA_EXPORT\SDM/SDMKIT.JAR is not a jar file!
I fixed it by using <b>WINRAR</b> freeware to extract the <b>.RAR</b> files.
My environment for installing SAP NetWeaver 2004s SR2 (SP9)
1. Download the two files Part1 (1.36 GB) and Part2 (1.34 GB)
2. JDK: jdk1.4.2_09
3. OS: Windows 2003 Server Evaluation version (6 months free @ microsoft.com)
4. Download and Install the WINRAR software on your machine.
5. Download JCE for Java from Java website.
Steps
1. Extract the two files in step 1 into the same folder. For ex: c:\s. Keep it short.
After extraction the size of my c:\s folder is 2.77 GB.
2. Double click setup.bat. Wait for the program to run.
3. Its takes approximately two hours to completely install it from here.
Try avoiding to UNINSTALL and INSTALL it might give you problems.
Thanks,
Harish -
PDF File is Corrupted or Damaged when the Attachment is Opened
Hello,
I have three Similar forms which are triggered from Sales Order, Delivery & Shipment respectively. Now, the requirement is to send the Form Output as PDF Attachment in a mail. But the Problem I am facing is that the Shipment Output goes as PDF attachment and when opened, it is displayed correctly. However, when the Sales Order & Delivery PDFs are sent as attachments, then the Adobe Reader says
"The File is Corrupted or damaged hence cannot be opened". This is the Message I get when processed from the Delivery. For the Sales Order, the Mail Output triggers with an error in SOST.
We have the Mail Ports open during Testing and I am using the latest version of Adobe Reader. Can someone give me any resolution to handle the Damaged PDF File?
Thanks and Regards,
Venkat Phani Prasad KonduriHi Konduri,
check the function module 'CONVERT_OTF' have you passed to the other forms.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
IMPORTING
BIN_FILESIZE = V_LEN_IN ---> bin_filesize
TABLES
OTF = I_OTF
LINES = I_TLINE
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
ERR_BAD_OTF = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Issue smart form output to Email as PDF attachment
Regards,
Sravanthi -
020: The custom scan file is corrupted.
Hi
Can someone please tell me how to fix the error "020: The custom scan file
is corrupted." This is the error being thrown up when we do a custom scan.
We have already tried creating a new policy package but to no avail, the
output is still the same. Does anyone know of another solution other than
reinstalling zenworks 4?
Thank you.
DannyRobin,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Greetings everyone
as the title says, ive had to install a new hard drive and i want to transfer my old itunes library onto the new drive, maintaining all playlists/play counts/ratings etc, album artwork if possible. The old hard drive is installed as a slave drive and is completely acessible, but due to the boot files being corrupted i cannot use it as the main drive and therefore operate my old itunes. Also, my ipod no longer contains my music library as itunes synced without my permission and wiped it.
The only thing i have tried is copying all of my old music files from the old drive by selecting 'add folder to library' and then the old drive, then replacing the new itunes library.itl file with the one from my old itunes. This restores all my playlists and playcounts but when i try to play any of the songs it says that the files could not be found, and i dont fancy locating 8500 music files individually!
Thankyou for taking the time to read my post, any help will be greatly appreciated.Ah, my reply was based on the assumption that you had a default installation of iTunes.
i.e you had all your music in the iTunes media folder inside your iTunes folder.
If your iTunes folder is so small compared to the amount of music you have, you must have a different arrangement.
This complicates you situation considerably.
iTunes can cope with moving around as long as all the music is in the iTunes media folder, not not if it isn't.
Your first step should be to get iTunes working on the old drive. This will involve editing the xml library file so that the drive letter is correct and then rebuilding the library from the xml file.
Then you will need to consolidate your library which moves everything into the iTunes media fodler. After that you will be able to use my first suggestion.
Step 1
Find the iTunes folder on the old drive and copy the two library files somewhere else so you can find them again. That's iTunes Library.itl and iTunes Library.xml.
Now open the copy of iTunes Library.xml with WordPad.
Look for lines starting:
Location
These contain the paths to tracks.
You will need to use a find/replace to change the drive letter so that it is correct.
Make sure that you include enough in the "find" so that you only change the right thing.
Maybe /c:/ and replace with /d:/ or whatever.
After that, tell iTunes to use the library on the old drive with a shift key start.
Hold down the shift key and start iTunes, keep holding the shift key until you are prompted to choose a library. Navigate to the iTunes folder on the old drive and choose iTunes Library.itl.
Then use the method in the following article to rebuild your library;
http://support.apple.com/kb/HT1451
Unfortunately the date added will be today for all tracks.
If iTunes works correctly after this, consolidate your library
File>>Library>>Organize>>consolidate
This copies all tracks into to iTunes media folder and could create a problem if you do not have disk space so don't do it if you are unsure about free disk space.
Check that iTunes works OK and then use the first method.
Message was edited by: polydorus -
I want to have firefox as my default browser. As this is a new laptop, I hasve to download firefox. As per the instructions, I click on "run" to complete the download, but instead of completing the download, a window appears which says that the author is unknown. If I ignore the window and click on run, I get another window which says the file is corrupt and I can't finish the download and have firefox as my browser.
I have windows 7 and explorer is the default browser and I want to change to firefox, but so far am being prevented from doing so. How can I successfully download firefox?It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See also:
* http://kb.mozillazine.org/Unable_to_save_or_download_files -
ITunes 6.0.1 for XP wont install, says installation file is corrupt -
Is this the same error as other people have been getting?
It says Installation file is corrupt, download a fresh copy and try again.
Same error.
This is happening on my friends windows XP machine, it happened on my dads,(problem solved, dont know how??? just d/l it and it worked when i was trying to fix it before i did anything) and on a work mates.
Today, because of this, he formatted his pc, and put everything back on. He tried to install iTunes as soon as he possibly could, no luck. deleted any trace it left, and installed SP 2 etc all the updates. Still no luck. Exact same error.hi Lee!
It says Installation file is corrupt, download a fresh copy and try again.
hmmm. this has been known to be caused by an nvidia firewall:
http://discussions.apple.com/click.jspa?searchID=-1&messageID=813136
... but if that doesn't seem to be relevant, you could also try downloading from the "QT + itunes" site:
http://www.apple.com/quicktime/download/win.html
... or using a different browser for the download.
if no joy with that, we could also try cutting the Gordian knot:
http://discussions.apple.com/click.jspa?searchID=-1&messageID=812538
keep us posted.
love, b -
I have tried it over and over from different links and I can not download and install and I can not figure out whyI have enough memory and I'm running windows vista my computer and virus protection are up to date. I have been trying to download firefox from google chrome and IE. I just don't understand why my computer keeps telling me that your file is corrupt when I know I downloaded it before and it was fine.
hello, the last version that was compatible with os x 10.4.11 is firefox 3.6.28 - you can download it from here: [http://www.mozilla.org/en-US/firefox/all-older.html]
[https://support.mozilla.org/en-US/kb/install-firefox-mac?s=installing&r=7&e=es&as=s#os=mac&browser=fx35 Install Firefox on Mac]
afterwards please disable automatic-updates in preferences > advanced > updates so that it doesn't happen again... -
I paid for and tried to download a song from itunes but the song won't dowload! When I got to store and click on available downloads it looks like it's downloading but I keep getting a message that the file is corrupt.
I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not downloading properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.) -
Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any help??
Please!
Thanks!If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem. -
I ordered a download of PagePlus X5 from Serif in the UK. The program is 706 MB. Several times, only 300+ MBs downloaded. The program had .exe but the partial download had .msi. The message that came up was "Setup was unable to find the msi package or patch . . ." Serif suggested I install Firefox as a web browser to see if the program would download. That is what I tried to do, and that is when I got the message that the file was corrupt. Serif is sending me a disk. Is there a disk for Firefox?
How large is your iPhone's storage? 16GB, 32GB, or 64GB? You can go to Settings > General > Usage, and that will tell you how much storage you have used and how much you have left. If the storage is truly almost full, then you would need to either delete files from your iPhone, or sync less files from iTunes to your iPhone.
Hope this helps!
Maybe you are looking for
-
19 items on a menu and each has text, image and price. HELP???!!!
I have a UITableView with a menu on it. I would like to have a description, picture, title and price for each item. there are 19 items so i figured that creating 19 views in the storyboard would not work. Is there a way of doing this? I have the head
-
How to handle user command method in module ALV Grid
HI Experts, I have 3 containers grid. GR_GRID TYPE REF TO CL_GUI_ALV_GRID, GR_GRID1 TYPE REF TO CL_GUI_ALV_GRID, GR_GRID2 TYPE REF TO CL_GUI_A
-
Video capture creates hundreds of 2 second clips?
If this behavior by-design? Or perhaps iMovie HD has a problem with my camcorder's date-time-stamping? I have an 8mm Sony D8 model DCR-TRV730. The behavior I expected to see was that a clip would be created every time it detected a start/stop based o
-
Need info on this Flash PDF catalog site
Could someone give me a lead on what software or service was used to create the following online Flash PDF catalog? I've searched most of the services that host your converted PDF as Flash on their site but I can't locate any reference in the source
-
I was charged for an app that i uninstalled
I was charged for an app that i uninstalled and i want a refund back because they should not have charged me