.m2ts files no audio in Premiere Pro CS6

So my brother want's me to create a video of his son using the videos he filmed on a Panasonic HC-X800, he gave me these files on an external hard-drive. I've never worked with .m2ts files before so wasn't sure what to expect when I dropped them into Premiere, wasn't expecting there to be no audio, I can't seem to find a fix and the only alternative being is to convert to mp4's using handbrake, which isn't the most easiest alternative considering there are 162 videos all varying in length.
Thanks

No audio is shown in your gspot screen... which MAY be because your video is dv avi type 1 instead of the type 2 that PPro prefers
http://www.deskshare.com/media-converter.aspx Digital Media Converter may work to convert (I've seen it mentioned in other threads)

Similar Messages

Import after effects file (cc 2014) in premiere pro (CS6)

Hello, I try to import after effects file (cc 2014) in premiere pro (CS6), but it says that the file may be corrupted (I tride with several files with no success) , any idea ? (windows)

no can do... it's not backward compatible
you need to pre-render the comp to a digital intermediate file
preferably lossless
hahahahahahahahaha!!!

Premiere Elements Project file wount open in Premiere Pro CS6

My friend Just bought Premiere elements 13 and created a Project. I cant open the Project in Premiere Pro CS6. Getting this error message:
"The Project appears to be damaged, it cannot be opened."
The Project workes fine in Premiere Elements 13
What can I do? What is wrong?

If you have done this:
Import a Premiere Elements project (Windows only)
   Select File > Open Project.
   Browse to an Adobe Premiere Elements project file, with file extension PREL.
   Click Open.
Premiere Pro converts the Premiere Elements project file to a Premiere Pro project file.
and it wont work Elements 13 is probably too new for CS6.

Working with audio | Learn Premiere Pro CS6 | Adobe TV

This movie introduces the robust audio tools in Premiere Pro. Abba Shapiro shows how to preview and trim audio in the Source Monitor. Whether it’s an audio-only file or the audio channel of a video clip, Abba shows how to enable sub-frame audio scrubbing and trimming. He also shows how to interpret clips to combine or separate stereo channels. At the same time, he introduces fundamental audio tools that are essential to working with audio in Premiere Pro.
http://adobe.ly/To00IZ

Is it possible to specify what audio channels to capture during capture from tape? It seems Premiere wants to mix the lavaliere mic and camera mic into a stereo track all the time, and then I have to modify audio settings and force it to mono in the project. In Final Cut pro 7, I am able to specify which audio tracks to capture, and this simplifies things in editing. I cannot see anywhere to do this in Premiere....

Recording audio with Premiere Pro CS6

I'm a new comer to Premiere, having come from Final Cut. I am trying to record audio into Premiere via a USB audio interface and mic. I am able to record, but I want to know how I can monitor while I'm recoding. I've already tried disabling the "mute input during recording."
Does anyone know how I can see my audio levels while recording?

(first importing to internal HD via the Canon XF Utility)
Try skipping any special software and just use Windows Explorer (or Finder).

How to fade audio on Premiere Pro CS6

I want to fade out background music at the end of the clip for a video i'm making and solutions appreciated
Thanks

You can use one of the Audio crossfades transitions or
keyframe the volume in the Effect Controls.

Premiere Pro CS6 Audio Sync Help.

Hi I am having problems with trying to sync my audio in Premiere Pro CS6. I clicked all of my audio files and hit synchronized and it does not come up with an option to sync by the audio. I know you can do this in Premiere Pro CC but why not in CS6? For the future, thank you all for whoever responded and took the time to answer my problem!

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

Export Media in Premiere Pro CS6 ONLY produces an Audio File in Media Encoder

First, all the system info:
Windows 7 Home Premium Service Pack 1
Intel HD Graphics 3000 Display Adapter
I’m using Premiere Pro CS6 Version 6.0.5 (001 (MC: 264587)) “Mighty Kilt”
Version 6.0.3.1 (64 Bit) of Adobe Media Encoder CS6
Other Adobe applications installed: AIR, Creative Cloud, Download Assistant, Encore CS6 Library, Flash Player 12 ActiveX, Flash Player 12 Plugin, Help Manager, Premiere Pro CS6, Premiere Pro CS6 Functional Content, Reader XI
I’ve run check for updates on both Premiere Pro and Media Encoder and everything is up to date
I'm producing a two disc, dual layer DVD set for 100 families of my son's marching band.
I have a half hour "masterwork" of interviews, performance segments, rehearsal sequences, credits, etc that I've edited together complete with sound, etc.
I also then have various other video segments from the season, some high quality (1920x1080) and some lower quality.
Rather than import everything into Encore and have Encore transcode them all at the same quality, I wanted to ensure that the half-hour piece and certain other segments were transcoded as high quality as possible and given the largest file sizes I could and then transcode other segments at lower quality levels as needed so everything would fit on the discs.
The company I'm using to duplicate/replicate the 100 DVDs from my Master DVD advised me to encode them FIRST in Premiere Pro as desired, and THEN import those files into Encore.
I've used Adobe Media Encoder a lot to export the individual segments into files I could upload to Youtube and have had no problem for the last several months.
But now, two things happen:
1) AME automatically designates the "Output File" with an .aac extension (see attached)
2) When I do an "Import As" of the AME encoded file in Encore it only loads an audio file (obviously)
Huh?
Here are the settings I use in my Export Media dialogue in Premiere Pro CS6:
Format: MPEG2-DVD
Preset: NTSC Widescreen High Quality
Output Name (and filetype): ______ name with Save as Type of "Video Files(*.mpg)
BOTH the "Export Video" and "Export Audio" boxes are checked (see attached screen print)
Filters Tab: left as is, don't do anything here
Multiplexer Tab:
choose the "DVD" button (vs the "None" button)
Bitrate Type: left as Variable which is what is selected as a default
Video Tab:
Codec: Reads MainConcept MPEG Video
Quality: increase it to the max of 5
TV Standard: NTSC
Frame Rate: 29.97
Field Order: None (Progressive)
Pixel Aspect Ration: Widescreen 16:9
Render at Maximum Depth box checked
Bitrate Encoding: I choose CBR for my high quality segments and VBR 2-pass for my lower quality segments
Bitrate: kick it up to the max for high qulaity segments, adjust as needed to get the filesize I want for my lower quality segments
Audio Tab:
Audio Format: Dolby Digital
Codec: Dolby Digital
Bitrate: At least 320, sometimes higher for the segments I want to be the highest quality
I check the "Use Maximum Render Quality" box
I chose "Queue" for everything and then let it run overnight
And yes, the original media has BOTH a video track and an audio track that works (see Screenprint)
So... what am I doing wrong, helpful experts????

Larry, Mark, Jim & Bill -
It is 1 am Tuesday morning and I'd do a primal scream if my family weren't all sleeping upstairs.
Somewhere along the way, I either read or was given the advice to just skip AME, load my videos as timelines in Encore, and just do the transcoding there.
I spent almost a day trying to figure out how to get "buttons" for my menus I was building (they weren't appearing in Encore's library like they should) and eventually found a simply workaround.
So I then spent the last 24 hours or so building all my menus, creating small clips for my "motion menu" buttons, getting all that straightened away.
Got really excited earlier tonight since it seemed like I was nearly finished and coming down the home stretch.
I hit "build" in Encore, went away for a couple hours, and came back to find a big error message awaiting me telling me that "Encoding Failed."
I have read a lot of posts, and the outlook is not good, or at least the possible solution not simple or short from a time perspective.
I have a 100 families awaiting their DVD they've paid for that they initially were told they'd have by mid-February. I've been telling everybody that they would have it - guaranteed - by this weekend when there's a band festival that would be ideal for distribution. The DVD duplication company says they have to have it by Wed morning at the absolute latest. Meaning I've got about 24 hours to figure this out and burn my dual-layer masters of the two DVDs or once again tell people "I know I guaranteed you'd have it by this weekend, but I don't have it ready yet."
Almost as importantly, I can't afford to keep spending the hours and hours and hours on this that I have. It's impacting my personal and professional life.
Thus the primal scream.
The posts I read about the encoding failure all pretty much advise that I use AME to do all the transcoding work. Which of course brings me squarely back to my original problem: I cannot get a video file out of AME.
I'm embedding a screenshot of what I see when I click on the pull-down menu in the AME dialogue window. The problem: there is no MPEG2-DVD option listed to be chosen.
Although I'm relatively new to forums, I've read enough posts by now that it seems like most people are in crisis mode when they post. So I realize my situation is not all that unique. But from a newbie rookie in the field to you experts, I REALLY could use some assistance right now, because between this and the long, cold winter we've had, I'm about to lose it. :-)
P.S. Mark, in answer to your question about frame rates, I have 18 different videos/films/projects that I'm including in my two DVD-set. There have probably been nearly 6-7 different cameras that have contributed footage to one or more of those films by borrowing camcorders of different brands and types and quality levels from people. Nearly every one of those 18 films have multi-camera sequences in them. And many films are collections of sequences which themselves are "nested sequences" sometimes three deep. In otherwords, there is no way I can tell you all the various frame rates that may be represented among these 18 separate projects and I certainly can't go back and hope to change them all to the same one.
Help. Please. :-)

No Audio File in Premiere Pro CS6

I have a Sony NX30. I use the sony media importer to get the files on my computer and then use the files in Premiere Pro CS6. Everything works fine.
I have a new desktop computer. Same windows OS. I installed the exact same sony media importer and the exact same Premiere Pro CS6. But on the new computer, when I import a video (using the sony media importer) there is no sound in Premiere Pro. Not even an audio file. Just the video file.
Here is what I learned while trouble shooting:
I can play the video files using the windows media player and I can hear the sound. The sound is there.
I tested some older video files previously imported on my old computer and they worked just fine on the new computer. I could hear the sound and there was a sound file in Pr.
The files I originally tried to import onto the new computer (that had no sound in Pr CS6) I imported on the old computer and they played just fine in Pr.
The newly imported files on the old computer will not play sound when I try them on the new computer (I put the files on an external hard drive and move them on the new computer.)
FYI: the sony media importer has no settings, you just click import amd it works.There are no options to change anything.
Anybody have a clue what could be the problem?
Thanks,
Steve

Adding to what Jim said...
Metadata contained in folder http://forums.adobe.com/thread/1015001?tstart=0
-and http://helpx.adobe.com/premiere-pro/using/transferring-importing-files.html
-http://helpx.adobe.com/premiere-pro/using/importing-assets-tapeless-formats.html

Premiere Pro CS6 importing .mp4 = "The file has no audio or video streams."

Hi,
When I import an MP4 clip into Adobe Premiere Pro CS6, I get the following message:
"File Import Failure
151_0010_01.mp4
Error Message
The file has no audio or video streams."
I have the latest Quicktime, and I have reinstalled Premiere Pro CS6 a few times already. If anyone knows a fix for this, I would greatly appreciate it. My system and clip info are found below. Thank you, Robert.
OPERATING SYSTEM
Win 7 Ultimate 64bit
CLIP INFO
Complete name                         \BPAV\CLPR\151_0009_01\151_0009_01.MP4
Format                                   : MPEG-4
Commercial name                    : XDCAM EX 35
Format profile                         : Base Media / Version 2
Codec ID                                : mp42
File size                                : 1.76 GiB
Duration                                 : 7mn 5s
Overall bit rate mode                 : Variable
Overall bit rate                         : 35.6 Mbps
Encoded date                             : UTC 2009-07-19 04:22:10
Tagged date                              : UTC 2009-07-19 04:22:10
Video
ID                                       : 1
Format                                   : MPEG Video
Commercial name                          : XDCAM EX 35
Format version                           : Version 2
Format profile                           : Main@High
Format settings, BVOP                    : Yes
Format settings, Matrix                  : Custom
Format settings, GOP                     : M=3, N=15
Codec ID                                 : 61
Duration                                 : 7mn 5s
Bit rate mode                            : Variable
Bit rate                                 : 34.0 Mbps
Maximum bit rate                         : 35.0 Mbps
Width                                    : 1 280 pixels
Height                                   : 720 pixels
Display aspect ratio                     : 16:9
Frame rate mode                          : Constant
Frame rate                               : 29.970 fps
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Progressive
Compression mode                         : Lossy
Bits/(Pixel*Frame)                       : 1.231
Stream size                              : 1.68 GiB (96%)
Language                                 : English
Encoded date                             : UTC 2009-07-19 04:22:10
Tagged date                              : UTC 2009-07-19 04:22:10
Color primaries                          : BT.709
Transfer characteristics                 : BT.709
Matrix coefficients                      : BT.709
Audio
ID                                       : 2
Format                                   : PCM
Format settings, Endianness              : Big
Format settings, Sign                    : Signed
Codec ID                                 : twos
Duration                                 : 7mn 5s
Bit rate mode                            : Constant
Bit rate                                 : 1 536 Kbps
Channel(s)                               : 2 channels
Sampling rate                            : 48.0 KHz
Bit depth                                : 16 bits
Stream size                              : 77.9 MiB (4%)
Language                                 : English
Encoded date                             : UTC 2009-07-19 04:22:10
Tagged date                              : UTC 2009-07-19 04:22:10

I encountered a similar problem. I had quicktime files that would play in the quicktime player from the desktop, but wouldn't import the files "the file has no audio or video streams". I had just reinstalled quicktime, and Premier with no change. Finally realized that we had Barracuda protection that was at fault. It was preventing communication to the quicktime codec and thus Premier could not interpret the footage. Another symptom, I would also launch After Effects and it would tell me that quicktime wasn't installed.
I solved this by uninstalling Barracuda. We reported the fault to Barracuda, and have not seen any change in the software.

Premiere Pro CS6 not playing audio on imported MP4 files.

I am editing a series of MP4 clips shot with a Canon Vixia, and for some reason, Premiere Pro CS6 will not play the audio on a few of the imported files. All of the clips were videotaped with the same camera. I know that there is audio on the clips in question, because it works fine when they are opened in Windows Media Player. I have deleted and reimported the faulty files, to no avail. I noticed in the online discussions that several others have had this problem; but I haven't been ablet o find an online fix thus far. I would greatly appreciate advice on this!

I have a Canon Vixia HFS100, which saves AVCHD files to an SD card... exactly what model is your camera?
If you are copying from an SD card to your hard drive, read these two links
Metadata contained in folder http://forums.adobe.com/thread/1015001?tstart=0
-and http://helpx.adobe.com/premiere-pro/using/transferring-importing-files.html

Premiere Pro CS6 playback freezes, regenerates .pek and .cfa files

When I try to watch something in a sequence, the Program Monitor freezes. The playhead moves in the timeline as usual and the audio plays just fine, but the visual freezes. Sometimes it stops a few seconds after I start playing and sometimes the video never plays at all. When I stop playback, it remains frozen for a while, then resets to the frame the playhead is on.
As I checked different options, I discovered Premiere is regenerating both the .pek and .cfa files every time I open it, even though all of my projects have already conformed. I have it set to store the media files with the project, so I know the preview files have not moved or been deleted. I work on this setup 8 hours a day, 5 days a week, and nothing changed since I was in yesterday. It was working fine when I shut it down last night, no one could have logged in while I was gone, and this morning it doesn't work. No updates were installed, no files were moved, no drives switched.
I have searched the internet for help, but all of the forums I've found are at least two months old and recommend installing the 6.0.3 update. I did run updates for all my Adobe software, and it didn't help. I also deleted and re-rendered my peak and cfa files.
One six-month-old forum said that Premiere CS6 cannot playback long AVCHD .m2ts files. Previously I had no problem working with .m2ts files 35 minutes and shorter, or with .mp4 files up to 75 minutes long. The video I'm currently working with is about 75 minutes long. And again, it was working fine yesterday.
Further investigation revealed that playback does not freeze when I import a selection from the Source Monitor (vs. importing from the Bin and trimming in the Timeline) and do not layer clips or apply effects.
Any thoughts?
Thanks.
Media Spec:
File type: AVCHD Video
Resolution: 1920x1080 (1080p), 29 fps
Imported from camera hard drive using PlayMemories Home
Computer Spec:
Adobe Premiere Pro CS6
Windows 7, 64-bit Service Pack 1
Graphics card is Quadro 5000, driver 276.19
OS/boot drive is a solid state 250gig, and files running off a 2TB local hard drive

I've tried several more things.
The playback does not freeze if I have only one clip in the timeline.
If I have clips on two or more video tracks, it starts freezing.
Once I clear it down to one video track, it takes a couple of seconds (up to 30) to start playing normally again.
Sometimes I can play two tracks for several minutes before it freezes. Sometimes it freezes immediately.
When I open Premiere, I get the "Media Pending" screen for way longer than usual.
I have rebuilt the peak and cfa files, no difference. GPU accelerator is enabled. The latest Adobe updates are installed.
I see a few other forums with similar problems but no solution.
No settings, file formats, or file locations have changed since Monday (the last time CS6 was working properly). After a lot of digging around I found that a Windows Defender Definition update was installed the morning of the day PP started freaking out. I can't get rid of this update.
I edit two or more hours of footage per day. They are lectures, so they are recorded in 1-3 hour chunks. I use two videos simultaneously--one with the professor's powerpoint presentation, and one of the professor. I keyframe the PPT video into the corner, overlaid over the lecturer. I did this for years without problem in CS5.5 and for two months without problem on my current setup.

Premiere Pro CS6: No sound importing .mts files

Hey,
My Setup:
- Adobe Premiere Pro CS6
- Windows 7 x64
My Problem:
I bought a DLSM (Panasonic Lumix G6H) and recorded five hours of footage using AVCHD 50p. I imported the .mts files into Premiere and got no sound at all. Whenever I open the .mts with VLC or WMP there is sound.
I spent numerous hours trying to find a solution for this problem, but unfortunately none of them worked for me.
At this point I'm quite frustrated, I NEVER create accounts to ask questions, because usually they are answered - but this time i couldnt manage to overcome this issue.
I already tried:
1) Copy the entire folder structure - didnt work
2) Rename the .mts to .m2ts - didnt work
3) Using the Media-Browser when importing the files - didnt work
4) Rename it to .avi - didnt work
5) Downloaded "Any Video Converter" as my last resort.. there is no option for 50p .m2ts (which might work) - not satisfying

More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
Are you allowing time for conforming?
Read Bill Hunt on Audio Conforming http://forums.adobe.com/thread/726693

Premiere pro CS6 - no audio

Hi,
I have installed recently on my Mac the trial version of Premiere Pro CS6 and looks like the program is not able to decode the audio for some video files (audio codec is AC3-A52). When I import the m2ts files, it shows only the video, no audio track is available.
I have installed the same trial version also on Windows and there it works fine. But on the mac (Lion), no
Anyone has some suggestions, what can be the issue?
Thanks.

If you submit a bug report here and offer in the bug report to provide a sample clip that shows this problem, that would be helpful: http://www.adobe.com/go/wish

Premiere Pro cs6 - Workspace video pane remains blank when trying to view imported files

Hello,
I'm currently working in Adobe Premiere Pro CS6. When I import my media into my workspace and drag it onto the timeline, the preview box where you can review your cut video remains black. Double clicking on the imported file gives the same result. I was initially importing .jpg files (about 300kb size for each) so I tried importing various other image formats - .png, .tiff, etc... I have even imported a movie file into my scene to determine whether the issue was with my content format. With the video, the audio plays fine, but the video remains blank in the preview box. I have tried rendering my workspace and changing my initial project settings, but to no avail. I went into my preferences for Premiere and from what I can determine, everything looks fine.
I'm running the software on an HP Pavilion, Windows 7 intel i7, 8gb ram, with a nvidia 650M 2GB card. Any help would be greatly appreciated. Thanks!

Hi,
Have you tried to change your Video Renderer? It would be under Project > Project Settings > General. Switch the option to Mercury Playback Engine software only and see if it helps.
Thanks,
Rameez

.m2ts files no audio in Premiere Pro CS6

Similar Messages

Maybe you are looking for