M30: FX G05200 + external Widescreen Monitor: Resolution 1440x900 not available

Hi!
I`ve got the following problem:
I`d like to connect a external TFT Widescreen Monitor with a native resolution of 1440x900 to my Satellite M30 with a GeForce FX Go5200.
But: It is not possible to adjust the resolution of the Graphics Card to 1440x900 (16:10), there are just standard resolutions (4:3) available.
I tried nearly everything:
- installed Monitor Drivers ==> no effect
- updated Drivers for the Go5200 (to 4644) ==> no effect
- updated Bios (to 1.7) ==> no effect
- Tried RIVAtuner and PowerStrip ==> no clue = no effect
Now Im pretty helpless and I dont know what to do...
Maybe someone faced the same problem here and found a solution.
Thank you for your help.
Christian

Got the solution:
http://www.laptopvideo2go.com/forum/index.php?showtopic=9243

Similar Messages

External Display native resolution suddenly not available

Hello,
I'm using a Westinghouse LCM-22w3 external monitor with my MBP, connected via a DVI-to VGA adapter. I've used this computer/monitor setup for quite some time with no problem. Yesterday, I hooked my computer up to my 46" Samsung HDTV with no problem.
When I hooked my computer back up to the Westinghouse, the native resolution (1680x1050) was no longer available. Instead, the monitor hooks up at 1600x1000. Strangely, though, the EDID information appears to suggest that 1680x1050 should be available. Here's the EDID:
DDC block report generated by SwitchResX version 4.1.1 for display
LCM-22w3
------------------- RAW DATA ------------------------
0 1 2 3 4 5 6 7 8 9 A B C D E F
0 | 00 FF FF FF FF 91 FF 00 5C 85 03 22 01 01 01 01
1 | 13 11 01 03 68 2F 1E 78 2E C5 85 A4 59 49 9A 24
2 | 12 50 54 BF EF 00 81 80 81 40 71 4F 95 00 95 0F
3 | B3 00 81 C0 81 00 21 39 90 30 62 1A 27 40 68 B0
4 | 36 00 D9 28 11 00 00 1C 00 00 00 FD 00 38 4C 1E
5 | 52 10 00 0A 20 20 20 20 20 20 00 00 00 FF 00 30
6 | 0A 20 20 20 20 20 20 20 20 20 20 20 00 00 00 FC
7 | 00 4C 43 4D 2D 32 32 77 33 0A 20 20 20 20 00 1D
< 00FFFFFF FF91FF00 5C850322 01010101 13110103 682F1E78 2EC585A4 59499A24 125054BF EF008180 8140714F 9500950F B30081C0 81002139 9030621A 274068B0 3600D928 1100001C 000000FD 00384C1E 5210000A 20202020 20200000 00FF0030 0A202020 20202020 20202020 000000FC 004C434D 2D323277 330A2020 2020001D >
Invalid EDID block: checksum failed. Last byte should be 8B
------------------- MAIN EDID BLOCK -----------------
EDID Version........1.3
Manufacturer........WDE
Product Code........802 (0322) (2203)
Serial Number.......01010101
Manufactured........Week 19 of year 2007
Max H Size..........47 cm
Max V Size..........30 cm
Gamma...............2.20
Display Supported Features:
Power Management: Active off
Display type:
RGB color display
Display is non continuous frequency
Default color space is sRGB standard
Preferred timing mode includes Native Pixel Format
Input signal & sync:
Analog input with: 0.700V / 0.000V
Composite Sync
Color info:
Red x = 0.644 Green x = 0.286 Blue x = 0.143 White x = 0.313
Red y = 0.348 Green y = 0.603 Blue y = 0.070 White y = 0.329
Established Timings:
720 x 400 @ 70Hz
640 x 480 @ 60Hz
640 x 480 @ 67Hz
640 x 480 @ 72Hz
640 x 480 @ 75Hz
800 x 600 @ 56Hz
800 x 600 @ 60Hz
800 x 600 @ 72Hz
800 x 600 @ 75Hz
832 x 624 @ 75Hz
1024 x 768 @ 60Hz
1024 x 768 @ 70Hz
1024 x 768 @ 75Hz
1280 x 1024 @ 75Hz
Manufacturer Reserved Timings:
Standard Timing Identification:
#0: 1280 x 1024 @ 60Hz (8180)
#1: 1280 x 960 @ 60Hz (8140)
#2: 1152 x 864 @ 75Hz (714F)
#3: 1440 x 900 @ 60Hz (9500)
#4: 1440 x 900 @ 75Hz (950F)
#5: 1680 x 1050 @ 60Hz (B300)
#6: 1280 x 720 @ 60Hz (81C0)
#7: 1280 x 800 @ 60Hz (8100)
Monitor Description blocks:
Descriptor #0 - Timing definition:
Mode = 1680 x 1050 @ 59.954Hz
Pixel Clock............. 146.25 MHz Non-Interlaced
Horizontal Vertical
Active.................. 1680 pixels 1050 lines
Front Porch............. 104 pixels 3 lines
Sync Width.............. 176 pixels 6 lines
Back Porch.............. 280 pixels 30 lines
Blanking................ 560 pixels 39 lines
Total................... 2240 pixels 1089 lines
Scan Rate............... 65.290 kHz 59.954 Hz
Image Size.............. 473 mm 296 mm
Border.................. 0 pixels 0 lines
Sync: Digital separate with
* Positive vertical polarity
* Negative horizontal polarity
Descriptor #1 - Monitor limits:
Horizontal frequency range.......30-82 kHz
Vertical frequency range.........56-76 Hz
Maximum bandwidth unspecified
Descriptor #2 - Serial number:
0
Descriptor #3 - Monitor name:
LCM-22w3
Any ideas? Switchresx didn't work, either

Well, you can move the file from the desktop back to its original location to at least get back to what you had before.
The file structure under Snow Leopard has changed and it's hard to keep up with this stuff. There is also now a com.apple.WindowServer.plist file in /System/Library/LaunchDaemons that you could try moving to the desktop and restarting. I dunno. Same rule applies.....if it doesn't help, move the file from the desktop back to its original location.

The usage monitor is currently not available

BT.com message...
"The usage monitor is currently not available for a small number of customers. We understand how important it is to monitor usage, and as you're not able to view the usage monitor we will not charge you for going over your usage limit this month. You don't need to do anything, we'll take care of that."
Well, finally BT's complete lack of ability to manage their core business is paying off.....can download/will download.....FANTASTIC!!!
And if you aren't affected by this and Do go over your limit...I'd complain to ofcom....you can't treat one customer one way and another a more preferential way....
Oh, and if you pay for anything more than 10MB download per month, I'd also ask for a discount......
Thank you BT...may your utter incompetence reign supreme forever....
All hail the God of failure...yes, Mr Buckley...I'm genuflecting in YOUR direction!!!

Hi Guys,
Thanks for raising this. I am sorry that you are having problems with the usage monitor. I would like to sort this out.
Can I ask that anyone having issues, Please drop me an email via the 'Contact Us' link in my profile. (click on my name and you will find the link under the "about me" section). Include your BT account details and the link to this thread.
Cheers
Sean
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

External widescreen monitor

I just bought a hannspree widescreen monitor for my pb since the screen has been acting up. I'm using a hdmi to dvi cord. problem is im only getting a letter box view. It is not stretched out. Is there anyway to expand it so it will fit the entire screen?

If you mirror, you won't be taking advantage of the widescreen, since it will be forced to the lower resolution of the eMac's screen, so I see little point in having a big widescreen. A 17" at 1024x768 would do the same, be sharper, and cost less (you might find a 19" that does 1024x768, but they're a bit rare).
You'll need a miniVGA to VGA adapter, and of course a VGA-capable LCD.

Files on external disk connected to TC not available when File-sharing activated?!

Dear all,
I use a TC 1st generation. I have attached a WD Book external drive to the TC which works as a separate "server" for the family documents and photo's. This set-up worked perfectly until I this week formatted the WD and re-installed it. Now the files on the WD are not available through the TC.
Done:
I have connected the WD Book directly to my Windows 7 machine: WD Book visible including a station ID (:E) and name. Files all available. Check.
I have connected the WD Book directly to my MacBook: WD Book visible including a station ID (:E) and name. Files all available. Check.
In the Airport configuration program the WD Book is visible as an extrenal disk, but there appears no name or station ID (:E). Instead it shows the specs of the WD Book. (298 GB WD 3200 JB external....) This is the main problem in my opinion? Something in the TC causes the WD Book not to be available.
Furthermore I have clicked the box for file sharing, with password, plus sharing via WAN in the Airport Configuration Program.
I hope someone can help me.
Thanks,
Paul

You asked the question and then answered it.
.. ughhhh!!! >> Why is that?
This is why..
the whole situation occurred when I had formatted my drive from FAT32 to NTFS since the FAT32 would not allow for large documents such as the export of my Outlook files as .pst. (14GB)
FAT32 is old without large file capability and without indexing. It is simply too old for modern usage.
Furthermore the only reason for me to move the disk was for testing purposes.
OK.. but attached to the TC.. the disk can save 14GB files no problems in HFS+ format from a PC. There is no need to do anything else.
If you want a large disk for backing up windows buy a new drive. And format it NTFS and plug it into the windows PC and leave it there.

Resolution 1920x1080 not available for an external monitor

Hi,
I've just bought a Tv Lcd + Monitor 24 Samsung P2470hn, I have a DisplayPort to DVI adapter and a DVI to HDMI cable to the monitor. But when a I go to System Preferences -> Displays, I only have resolutions up to 1600x900. The monitor supports 1920x1080 but it isn't available. What I'm doing wrong? Could it be the DVI to HDMI cable? The monitor has a DVI input.
One weird thing is that when I go to System Profiler -> Graphics/Displays I see that the external monitor has this
SyncMaster:
Resolution: 1600 x 900 @ 60 Hz
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Rotation: Supported
Television: Yes
Note the last item "Television: Yes" could be that the problem? if so how can I change it?
Thanks
Gabriel

I find it very annoying that I have to use MiniDisplay Port to VGA to get 1366x768 or 1920x1080 resolution options in the Display Control Pane. If I use MiniDisplay Port to HDMI, I get some old common resolutions, (some weird ones too like 1344x1024) as well as 720p, 1080i, and 1080p. 1080p would be great, except this is more of a "TV" video input rather than a "PC" monitor input, I either get overscan or underscan (depending on the "Overscan" check box).
Why, especially since it's all digital with HDMI, doesn't Apple include nice 1:1 Pixel mapping using HDMI? It's very frustrating! I've noticed some, (generally more expensive HDTVs, like my 63" Samsung Plasma), HDTVs will do "Just Scan" (as opposed to "OverScan" or "UnderScan") then the 1080p with HDMI works beautifully.
All of my VIZIO TVs, I have to use the VGA to get 1:1 Pixel mapping. At least, with a high quality VGA cable (even my 25 foot one from MonoPrice.com that would cost 10 times more at a local store) does convert back to digital (for LCD panel) without noticeable noise and pixel shifting (or ghosting, which I've seen with cheap VGA cables, weird, seeing analog distortions on a digital LCD display, but hey, bad analog in -bad analog looking image out). Plus, unless you have the newest Macs with audio supported through the MiniDisplay Port, you can only get the TV speakers to work with the "PC" VGA input and the "PC" audio input (3.5mm stereo phono jack) next to it. With an HDMI input, the TV will look for audio in the HDMI source and not from the "PC" audio input.

External widescreen monitor not working properly

Hi! i have an LG Flatron 2243S monitor and i just hooked it up to my late 2011 macbook pro 15" through the mini display port and vga cable since the monitor does not have DVI input, Im having issues with the resolution it shows. if i put it in 1920x1080 60hz it leaves a black space on the left side of the screen. I have it set to 1400x1050 60hz so it fils the screen but it looks streched since i believe that is more of a 4:3 resolution... Can you guys help me?

Well, I think I have solved the problem. One of the external cases apparently was screwing up the works as far as the USB bus was concerned. After removing that unit from the setup, it seems as if everything is back to normal. I now have to test the HDD's to see if either of the two from that particular enclosure have a problem.

External display monitor suddenly is not working; power is on

Hello,
My LG external monitor display suddenly is not working today. It powers on, and it says "analog power saving mode", and it is detected by my ibook G4. When I go to preferences, and show displays, it shows that two displays are active, my laptop "Color LCD" and my external, "L1932Tq". If the external is plugged in, it indicates that that is the system in use, though the external monitor is black and unresponding (except for power light which is on). I replaced all cords - the power cord and the mini VGA cord and it's connecting cord to the monitor, and there are no changes.
Is this monitor just suddenly broken, perhaps through it's internal connection devices??
Thanks!!
alidocs

Dear Shankar,
Issue is solved. It was Program Error from SAP side.
Now All the buttons are working fine and I am able to print PDF also.
Solution is implement the note 2031585 - SAP NWBC ABAP Runtime Patch 40.
System Details : ECC 6.0 NetWeiver 7.4 ,
EHP 7 , SP-Level 06
Thanks a lot for all your suggestions.
Regards,
Namsheed.

T420 - external 24" monitor DVI- Displayport : not detected when connected via KVM switch

Hi,
I've been using a 2port USB KVM Switch from InLine for a long time connecting a mac mini and a macbook pro
to a 24" LCD. Recently I had to replace the MacBookPro with a T420. Unfortunately the T420 does not detect the
monitor, when connected via the KVM switch.
I tried:
A) T420 -> Lenovo Displayport to DVI-Adapter -> KVM-Switch -> 24" monitor: NO SUCCESS
B) T420 -> Thinkpad miniDock Series 3 DVI Port-> KVM Seitch -> 24" monitor : NO SUCCESS
C) T420 ->Thinkpad miniDock Series 3 DVI Port-> 24" monitor - > SUCCESS
D) T420 ->Thinkpad miniDock Series 3 VGA Port -> 24" monitor - > SUCCESS
So I have a workaround, but leaving out the KVM switch is not a long term option.
This is all on Win 7 professional / 64bit
Using config (A) I then installed the Intel HD Graphics Driver version 8.15.10.2342 16 May 2011
SURPRISE: during driver install, the monitor WAS detected!!!
SECOND SURPRISE: after reboot I was back in the old situation where the monitor was NOT DETECTED
CONCLUSION:
Seems like a software issue with the Intel HD Graphice driver.
ANY HINT/COMMENT/HELP highly appreciated!
Thanks,
Michael

hey mgold,
as the T420 works correctly with the external monitor and with the miniDock ; it is sad to say the the KVM switch is non-compatible.
I would recommend that you get in contact with the manufacturer of the KVM. At the same time, try uninstalling the current video drivers of your T420 and see if it makes any difference with the KVM if the T420 is running on a generic driver
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

30" Cinema Resolution Option not Available

Hi,
I just got a 30-inch cinema display, installed the software, but when trying to set the resolution to 1250x1600, my computer only goes up to 1280x800.
I have a G5dual 2.5 GHz Power PC with 1GB of RAM running OSX 10.4.8
Does anyone know what is not set correctly?
Thanks very much for any help or troubleshooting ideas.
-Cherry

Thank you for your reply. It looks like I have only one DVI port, as there is only one port that takes the Display connector.
The system profiler states the following under Hardware->Graphics/Display:
ATI Radeon 9600 XT:
Chipset Model: ATY,RV360
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x4152
Revision ID: 0x0000
ROM Revision: 113-A13602-121
Displays:
Cinema HD:
Display Type: LCD
Resolution: 1280 x 800
Depth: 32-bit Color
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Display:
Status: No display connected
=========
The "No display connected" certainly doesn't look good!
Am I missing the right graphics board? The guys at the Mac store reviewed a printout of my system profiler that I brought in and declared that I had everything I needed.
Thanks again

Spool Error Monitoring through CCMS not available in Standard Delivered MTE

Hi Everyone,
My Client requirement is to monitor SPOOL Errors through CCMS. But Standard Monitoring Tree Elements (MTEs) does not capture the Spool Errors .
Can anybody Please let me know , How Can I setup Spool Error Monitoring through CCMS.
Thanks & Regards
Deepak Gosain

Deepak,
Check this One...
//help.sap.com/saphelp_nw70/helpdata/en/34/658a3b15566262e10000000a11402f/content.htm]
Hope this Helps....
Happy Learning
Chander N Purna

HP Monitor driver is not available for Windows 10

Hi, When I try to download the driver for my monitor (http://support.hp.com/us-en/drivers/selfservice/HP-25-inch-Flat-Panel-Monitor-series/3757979/model/4332278#Z7_3054ICK0KGTE30AQO5O3KA30R1), there is no option for Windows 10. What can I do?

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that you are attempting to install drivers for your HP monitor, but there are no drivers to install for Windows 10. I would be happy to help you! To connect your monitor without downloading drivers from the website, I recommend following the steps in this document on HP Products - Where do I find Windows 10 drivers and software for my model? This should help to install the necessary drivers for your system. I hope this helps! Best Regards

Tecra A2: Cannot use the 1680x1050 resolution on external LCD monitor

Hi All,
I need to make my Tecra A2 run at 1680x1050 at 60Hz for my new external VW222U LCD monitor which is connected to my port replicator.
I know the card (which is 82852/82855) can run at this resolution as when using the Intel Embedded drivers it works, just one has to give up all the little nice things when using the standard drivers, like monitor switching etc....
I have been discussing on many forums over at Intel's site why this resolution is not available by default, it appears that it is not a resolution enabled in the video BIOS which the display drivers read by default, so the vendor need to add it, the reason that the embedded drivers work, is that they don't read this directly from the video BIOS....
Thanks and regards,
Adam

Hi,
I know that issue, but we have to live with it because it seems that the graphics card vendors are giving some really "default" drivers to the notebook manufacturers.
I have an Satellite Pro S200 and I also use the Intel drivers from the Intel homepage. But my monitorswitching, etc.. works like a charm so maybe if you install the tools like the "FN-F5" etc.. it would probably work.
I would give it a try, otherwise: it is like it is.. :/
Greets

Satellite 5200-S801 resolution 1680x1050 on external wide monitor ?

How ?
videocard 460GO

Hi
I can only repeat some suggestions which were posted here in the forum
The available screen resolution depends on the graphic driver.
Usually the resolution is not available because its not listed in the graphic driver!
Therefore there is not much to do. If the driver does not support the 1680x1050 resolution you will not be able to choose it.

Unable to use external display native resolution

Dear all,
Here is the current setup I'm using :
MacbookPro 15", hi res, Mid 2010 with Mac OS 10.6.6, software up-to-date
Apple MiniDisplayPort to VGA Adapter Firmware 1.03
IIYAMA Prolite E2607WSD, a 26" monitor with native resolution of 1920x1200 @ 60Hz
When connecting the MiniDisplayPort to VGA adapter to the VGA cable, the MBP doesn't enable me to set the external native monitor resolution of 1920x1200 with extended desktop. The maximum available resolution the macbookpro is able to diaply is 1920x1080.
What I tried :
-using high performance graphics in the energy saver settings
-using clamshell mode
-using mirroring mode
-reset PRAM
-reset SCM
-delete com.windowserver.plist
-use SwitchResX.app and DisplayConfigX.app to force the native resolution
To make sure that the monitor was correctly behaving, I tried with a PC with WinXP, and I was able to get max resolution of 1920x1200 without an issue. I also tried with a Macbook 2008 with 10.5.6, and with it's own DisplayPort to VGA adapter (the "normal size" one, not the "mini" one I'm using with the MBP), and it worked as well with the native resolution of 1920x1200.
I 'm coming to the conclusion that either the minidisplayport to vga adapter doesn't accept any resolution higher than 1920x1080 or that the one I bought from Apple is not properly working, or that I should use the minidisplay port to DVI adapter (no HDMI here as an input for the monitor)...
I also browsed the forum and found a lot of similar issues, so I guess it's pretty common, but no workaround seems possible.
Does anybody in the community had the same issue and know how to solve it ?
Thanks in advance.
PolCls

Hello BSteely,
I actually tried to get the EDID information and to replicate them as much as possible but everytime I tried a custom resolution, after reboot, SRX will say " the system didn't accept this setup"... and the proper resolution is not available..
See below the data :
DDC block report generated by SwitchResX version 4.2 for display
PLE2607WSD
------------------- RAW DATA ------------------------
0 1 2 3 4 5 6 7 8 9 A B C D E F
0 | 00 FF FF FF FF FF FF 00 26 CD 03 66 21 02 00 00
1 | 0C 14 01 03 68 37 22 78 2A 7B 65 A5 55 48 99 26
2 | 12 50 54 BD EF 80 71 4F 81 80 81 8F 95 00 95 0F
3 | A9 40 B3 00 D1 C0 7D 4B 80 A0 72 B0 2D 40 88 C8
4 | 36 00 26 58 21 00 00 1C 00 00 00 FF 00 31 31 30
5 | 35 36 30 31 32 30 30 35 34 35 00 00 00 FD 00 37
6 | 4C 1D 51 14 00 0A 20 20 20 20 20 20 00 00 00 FC
7 | 00 50 4C 45 32 36 30 37 57 53 44 0A 20 20 00 11
< 00FFFFFF FFFFFF00 26CD0366 21020000 0C140103 68372278 2A7B65A5 55489926 125054BD EF80714F 8180818F 9500950F A940B300 D1C07D4B 80A072B0 2D4088C8 36002658 2100001C 000000FF 00313130 35363031 32303035 34350000 00FD0037 4C1D5114 000A2020 20202020 000000FC 00504C45 32363037 5753440A 20200011 >
{ 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x26, 0xCD, 0x03, 0x66, 0x21, 0x02, 0x00, 0x00, 0x0C, 0x14, 0x01, 0x03, 0x68, 0x37, 0x22, 0x78, 0x2A, 0x7B, 0x65, 0xA5, 0x55, 0x48, 0x99, 0x26, 0x12, 0x50, 0x54, 0xBD, 0xEF, 0x80, 0x71, 0x4F, 0x81, 0x80, 0x81, 0x8F, 0x95, 0x00, 0x95, 0x0F, 0xA9, 0x40, 0xB3, 0x00, 0xD1, 0xC0, 0x7D, 0x4B, 0x80, 0xA0, 0x72, 0xB0, 0x2D, 0x40, 0x88, 0xC8, 0x36, 0x00, 0x26, 0x58, 0x21, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x00, 0xFF, 0x00, 0x31, 0x31, 0x30, 0x35, 0x36, 0x30, 0x31, 0x32, 0x30, 0x30, 0x35, 0x34, 0x35, 0x00, 0x00, 0x00, 0xFD, 0x00, 0x37, 0x4C, 0x1D, 0x51, 0x14, 0x00, 0x0A, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x50, 0x4C, 0x45, 0x32, 0x36, 0x30, 0x37, 0x57, 0x53, 0x44, 0x0A, 0x20, 0x20, 0x00, 0x11, }
Valid EDID block: checksum passed
------------------- MAIN EDID BLOCK -----------------
EDID Version........1.3
Manufacturer........IVM
Product Code........870 (0366) (6603)
Serial Number.......00000221
Manufactured........Week 12 of year 2010
Max H Size..........55 cm
Max V Size..........34 cm
Gamma...............2,20
Display Supported Features:
Power Management: Active off
Display type:
RGB color display
Display is non continuous frequency
Default color space is not sRGB standard
Preferred timing mode includes Native Pixel Format
Input signal & sync:
Analog input with: 0.700V / 0.000V
Composite Sync
Color info:
Red x = 0,646 Green x = 0,283 Blue x = 0,149 White x = 0,313
Red y = 0,335 Green y = 0,601 Blue y = 0,072 White y = 0,329
Established Timings:
720 x 400 @ 70Hz
640 x 480 @ 60Hz
640 x 480 @ 67Hz
640 x 480 @ 72Hz
640 x 480 @ 75Hz
800 x 600 @ 60Hz
800 x 600 @ 72Hz
800 x 600 @ 75Hz
832 x 624 @ 75Hz
1024 x 768 @ 60Hz
1024 x 768 @ 70Hz
1024 x 768 @ 75Hz
1280 x 1024 @ 75Hz
Manufacturer Reserved Timings:
1152 x 870 @ 75Hz
Standard Timing Identification:
#0: 1152 x 864 @ 75Hz (714F)
#1: 1280 x 1024 @ 60Hz (8180)
#2: 1280 x 1024 @ 75Hz (818F)
#3: 1440 x 900 @ 60Hz (9500)
#4: 1440 x 900 @ 75Hz (950F)
#5: 1600 x 1200 @ 60Hz (A940)
#6: 1680 x 1050 @ 60Hz (B300)
#7: 1920 x 1080 @ 60Hz (D1C0)
Monitor Description blocks:
Descriptor #0 - Timing definition:
Mode = 1920 x 1200 @ 59,885Hz
Pixel Clock............. 193,25 MHz Non-Interlaced
Horizontal Vertical
Active.................. 1920 pixels 1200 lines
Front Porch............. 136 pixels 3 lines
Sync Width.............. 200 pixels 6 lines
Back Porch.............. 336 pixels 36 lines
Blanking................ 672 pixels 45 lines
Total................... 2592 pixels 1245 lines
Scan Rate............... 74,556 kHz 59,885 Hz
Image Size.............. 550 mm 344 mm
Border.................. 0 pixels 0 lines
Sync: Digital separate with
* Positive vertical polarity
* Negative horizontal polarity
Descriptor #1 - Serial number:
1105601200545
Descriptor #2 - Monitor limits:
Horizontal frequency range.......29-81 kHz
Vertical frequency range.........55-76 Hz
Maximum bandwidth unspecified
Descriptor #3 - Monitor name:
PLE2607WSD
What do you think are the parameters I should use ?
Thanks in advance;
Paul

M30: FX G05200 + external Widescreen Monitor: Resolution 1440x900 not available

Similar Messages

Maybe you are looking for