M3800 Developer Edition: wifi doesn't work after sleep

I have an M3800 Developer Edition (2015 model). Ubuntu is factory-installed 14.04, with hardware enablement stack installed. Recently (past 1-2 weeks) wifi doesn't work after sleep (lid closed or open doesn't matter), and only rebooting gets in back. Tried rmmod and modprobe with no success. Has anyone else seen this, and/or are you aware of any open bug(s) for this?
Relevant ouput:
lsmod when problem exists:
iwlmvm                217725 0
mac80211              652718 1 iwlmvm
iwlwifi               179412 1 iwlmvm
cfg80211              494362 3 iwlwifi,mac80211,iwlmvm
rfkill list when problem exists:
1: phy0: Wireless LAN
        Soft blocked: no
        Hard blocked: no
3: hci0: Bluetooth
        Soft blocked: no
        Hard blocked: no
rmmod the above, then modprobe iwlwifi. Does not fix problem, only rebooting does:
May 4 08:23:14 jonathan-m3800 kernel: [69089.189614] cfg80211: Calling CRDA to update world regulatory domain
May 4 08:23:14 jonathan-m3800 kernel: [69089.192181] cfg80211: World regulatory domain updated:
May 4 08:23:14 jonathan-m3800 kernel: [69089.192184] cfg80211: DFS Master region: unset
May 4 08:23:14 jonathan-m3800 kernel: [69089.192185] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
May 4 08:23:14 jonathan-m3800 kernel: [69089.192187] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
May 4 08:23:14 jonathan-m3800 kernel: [69089.192188] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
May 4 08:23:14 jonathan-m3800 kernel: [69089.192189] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
May 4 08:23:14 jonathan-m3800 kernel: [69089.192190] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
May 4 08:23:14 jonathan-m3800 kernel: [69089.192191] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
May 4 08:23:14 jonathan-m3800 kernel: [69089.204141] Intel(R) Wireless WiFi driver for Linux, in-tree:
May 4 08:23:14 jonathan-m3800 kernel: [69089.204143] Copyright(c) 2003- 2014 Intel Corporation
May 4 08:23:14 jonathan-m3800 kernel: [69089.204414] iwlwifi 0000:06:00.0: irq 48 for MSI/MSI-X
May 4 08:23:14 jonathan-m3800 kernel: [69089.204904] iwlwifi 0000:06:00.0: loaded firmware version 25.228.9.0 op_mode iwlmvm
May 4 08:23:14 jonathan-m3800 kernel: [69089.207709] iwlwifi 0000:06:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
May 4 08:23:14 jonathan-m3800 kernel: [69089.207790] iwlwifi 0000:06:00.0: L1 Enabled - LTR Enabled
May 4 08:23:14 jonathan-m3800 kernel: [69089.208150] iwlwifi 0000:06:00.0: L1 Enabled - LTR Enabled
May 4 08:23:14 jonathan-m3800 kernel: [69089.392408] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
May 4 08:23:14 jonathan-m3800 NetworkManager[901]:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/net/wlan0, iface: wlan0)
May 4 08:23:14 jonathan-m3800 NetworkManager[901]:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/net/wlan0, iface: wlan0): no ifupdown configuration found.
May 4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> (wlan0): using nl80211 for WiFi device control
May 4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> (wlan0): driver supports Access Point (AP) mode
May 4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> (wlan0): new 802.11 WiFi device (driver: 'iwlwifi' ifindex: 4)
May 4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/2
May 4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> rfkill5: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/ieee80211/phy0/rfkill5) (driver iwlwifi)
May 4 08:23:16 jonathan-m3800 ModemManager[852]: <warn> Couldn't find support for device at '/sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0': not supported by any plugin
lspci:
06:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b)
After reboot:
lsmod |grep -i iwl:
iwlmvm                217725 0
mac80211              652718 1 iwlmvm
iwlwifi               179412 1 iwlmvm
cfg80211              494362 3 iwlwifi,mac80211,iwlmvm
rfkill list after reboot:
0: nfc0: NFC
        Soft blocked: no
        Hard blocked: no
1: phy0: Wireless LAN
        Soft blocked: no
        Hard blocked: no
2: hci0: Bluetooth
        Soft blocked: no
        Hard blocked: no

Wi-Fi still not reconnecting after sleep
http://forums.macrumors.com/showthread.php?t=1229591

Similar Messages

Wifi doesn't work after sleep

I'm having an issue where my wifi will stop working after sleep. This isn't the same problem where the network had to be manually reconnected--
The "radar" will be grayed out, and I can see the networks if I click on it, but I cannot reconnect, disable wifi (make the radar the pie shape). The only thing I can do is do a hard reset holding the power button until the computer shuts off.
In fact, if I select 'Apple -> Restart,' nothing happens. I have to hold the power button down.
Any thoughts?

Wi-Fi still not reconnecting after sleep
http://forums.macrumors.com/showthread.php?t=1229591

Why the wifi doesn't work after the upgrade to iOS 5?

The problem is that after the upgrade to iOS 5 the wifi doesn't work. I mean, iPad is connected to the wifi but not to the internet and also the connection on the other device doesn't work. So I had to turn off the router and then turn it on.

Try a hard reset first to see if that does any good. To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
If no luck with that, you'll need to manually connect your iPod to your iTUnes library in recovery mode using the instructions in the Apple support document below. Doing so will allow you to bypass the passcode and restore the iPod.
iOS: Unable to update or restore
B-rock

Wifi doesn't work after screen replacement

My husband was gracious enough to replace the screen on my ipad 2. However, now, I can't connect to wifi unless I'm right next to the router.The antenna needs alot of signal to see any network. He verified the antenna isn't broken. Any ideas on how to fix this problem?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

WiFi doesn't work after repair

Hi,
Today I received my iMac 27" back from repair. It had the screen and the optical drive replaced since both were defect.
According to the papers, nothing else has been replaced, but WiFi doesn't work now. I can't connect to my own network (Time Capsule), and only very few networks show up in the list -- quite often, mine is not there, and sometimes there are none at all. Checking with a laptop right next to the iMac, I can see plenty of networks (and my own network works fine).
Could the Apple guys accidentally have screwed up something? I thought about looking at the antenna connectors on the AirPort card (a guide is available on iFixIt), but it seems quite complicated (and I don't have the necessary screwdrivers).
Thanks,
Michael

And if it under warranty you do not want to open it up and void your warranty.
When the authorized tech installed new memory modules in my 09 Mac mini, he shorted out my wireless card and they had to order a new one and install it. I would take it back and have them figure out what is wrong.

HT4528 iPhone 4s' wifi doesn't work after upgrading to iOS 7

My Verizon iPhone 4s will not connect to wifi after upgrading to iOS 7. You would think Apple would have figured this problem out before releasing iOS 7 to the public. Any fixes?

After having trying everything out on the web, I found a fix that worked out. The thing to do is to deactivate your phone and then reactivate it. The way to do it is to first power off the phone. Then take out the SIM card. Then power on the phone and make an emergency call for about 5 sec. Turn the power off. Place the SIM card back into the phone. Power on the phone and plug it into the computer and to itune. Itune will then ask for your user name and password. The wifi will be working.
All you have to do then, is reinstall your saved restored file.
That's it !!

Wifi won't work after sleep

I close my Macbook Air and put it to sleep. Then when I open it to wake it up, the wifi will not connect. The 'Fan" wifi icon shows it is searching for a connection but after a moment it stops.
This happens at work, home and school.
I have to turn the wifi off and then turn it back on to get it to work.
Any suggestions?

Wi-Fi still not reconnecting after sleep
http://forums.macrumors.com/showthread.php?t=1229591

Bluetooth keyboard and magic pad doesn't work after sleep

This only recently developed, once my 2013 iMac goes into sleep mode, when I tap the keyboard to wake it up to put in my security password, the bluetooth keyboard doesn't work. Also, the track pad shows no point, i.e. I have a sign in screen, but can't sign it.

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/kb/ts3048
-Griff W.

Bluetooth doesn't work after sleep mode wake up

Okay, so my computer goes to sleep while in Windows XP and I wake is up. I have my bluetooth mouse and keyboard hooked up to it and I try to wake them up. My mouse doesn't reconnect. I notice that my computer also says that it's not connected to my wireless network, but the my web browser and messenger still connect fine. I check my bluetooth preferences to find out that nothing is connected and when I try to reconnect it doesn't work. This never used to happen and it just recently started when I reinstalled windows this past week. The only way I could get the devices to reconnect was to reboot and even then when my computer goes back to sleep they still disconnect.
Anyone else have this problem... or better yet, an answer?

How did you actually solve your problem ?
I have this too on a macbook 2.4.
any help appreciated, this is very annoying.
I installed all latest updates to windows/bootcamp. Did not help.

EDIT method doesn't work after adding new row

I would like to start editing after adding new row into TableView.
I copied example from Oracle website: [Using JavaFX UI Controls - 13 Table View|http://docs.oracle.com/javafx/2/ui_controls/table-view.htm#CJAGDAHE]. Then I put additional button for adding new row and define action for the button.
    final Button addButton = new Button("Add");
    addButton.setOnAction(new EventHandler<ActionEvent>() {
        @Override
        public void handle(ActionEvent arg0) {
            Person p = new Person("", "", "");
            table.getItems().add(p);
            table.getSelectionModel().select(p);
            table.edit(table.getSelectionModel().getSelectedIndex(), table.getColumns().get(2));
    });In result I can see selected new row but the table doesn't start edditing in the third column.
I have similar method for editing existing rows and it works properly.
    final Button editButton = new Button("Edit");
    editButton.setOnAction(new EventHandler<ActionEvent>() {
        @Override
        public void handle(ActionEvent arg0) {
            table.edit(table.getSelectionModel().getSelectedIndex(), table.getColumns().get(2));
    });Could you help me what I do wrong?

Try wrapping the setCaretPosition(...) method in a SwingUtilities.invokeLater(...)
caret=outputArea.getDocument().getText(0,outputArea.getDocument().getLength()).length();Should be:
caret = outputArea.getDocument().getLength();

Wifi doesn't work after 4.0.1-1 kernel update

Hi. I use 64bits archlinux, today I've updated linux from 3.18.6 to 4.0.1 and then my wifi card cannot connect to my net, network manager asks me for my password (although the password is obviously well typed). Downgrading linux to 3.18.6 solves the problem and internet connection works 'out of the box' as ever worked
I've compared dmesg and journalctl between both, 3.18.6 and 4.0.1 kernels.
dmesg-4.0.1: http://pastebin.com/ZyMvnmKm
journalctl-4.0.1: http://pastebin.com/r0r5Hd4z
dmesg-3.18.6: http://pastebin.com/1f18z9rh
journalctl-3.18.6: http://pastebin.com/HZkFASGw
I've found a warning in journalctl in 4.0.1 kernel that could be related with my problem
abr 30 14:58:51 surface NetworkManager[276]: <warn> Connection disconnected (reason 15)
However I'm really not sure what it means, any help would be very appreciated
PD: my machine is a Surface Pro and its wifi card has TONS of problems in linux, see https://bugs.archlinux.org/task/44269 and https://bugzilla.kernel.org/show_bug.cgi?id=69661 . However I believe that this problem is not related with those older bugs

David, there is no 'reason 15' in my journalctl.
However, for linux 3.19.3, there is 4-way handshake completed messages:
May 02 14:42:58 Archenlighter NetworkManager[340]: <info> (wlo1): supplicant interface state: associating -> 4-way handshake
May 02 14:42:58 Archenlighter NetworkManager[340]: <info> (wlo1): supplicant interface state: 4-way handshake -> completed
May 02 14:58:51 Archenlighter NetworkManager[354]: <info> (wlo1): supplicant interface state: associating -> 4-way handshake
May 02 14:58:51 Archenlighter NetworkManager[354]: <info> (wlo1): supplicant interface state: 4-way handshake -> completed
May 02 18:20:12 Archenlighter NetworkManager[354]: <info> (wlo1): supplicant interface state: associated -> 4-way handshake
May 02 18:20:13 Archenlighter NetworkManager[354]: <info> (wlo1): supplicant interface state: 4-way handshake -> completed
But during the time linux 4.0.1 kernel was active there is no 4-way handshake message, however I found the following messages in journalctl during the time linux 4.0.1 kernel was in play:
May 02 14:52:49 Archenlighter avahi-daemon[336]: Leaving mDNS multicast group on interface wlo1.IPv4 with address 192.168.137.100.
May 02 14:52:49 Archenlighter wpa_supplicant[381]: wlo1: CTRL-EVENT-DISCONNECTED bssid=ec:f3:5b:3b:14:4a reason=3 locally_generated=1
May 02 14:52:49 Archenlighter kernel: wl0: link down (wlo1)
May 02 14:52:49 Archenlighter wpa_supplicant[381]: nl80211: deinit ifname=wlo1 disabled_11b_rates=0
May 02 14:52:49 Archenlighter wpa_supplicant[381]: wlo1: CTRL-EVENT-TERMINATING
May 02 14:52:49 Archenlighter NetworkManager[340]: <info> (wlo1): device state change: activated -> deactivating (reason 'removed') [100 110 36]
May 02 14:52:50 Archenlighter NetworkManager[340]: <info> (wlo1): device state change: deactivating -> unmanaged (reason 'removed') [110 10 36]
May 02 14:52:50 Archenlighter NetworkManager[340]: <info> (wlo1): deactivating device (reason 'removed') [36]
May 02 14:52:50 Archenlighter NetworkManager[340]: <info> (wlo1): canceled DHCP transaction, DHCP client pid 396
May 02 14:52:50 Archenlighter NetworkManager[340]: <info> (wlo1): DHCPv4 state changed bound -> done
May 02 14:52:50 Archenlighter kernel: IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
May 02 14:58:38 Archenlighter kernel: wl 0000:0d:00.0 wlo1: renamed from wlan0
Thanks David for suggesting this!
Thanks head_on_a_stick, i've updated it.
Last edited by enlighter (2015-05-06 07:11:16)

WiFi doesn't work after the Ipod fell into water

After I reinstalled the systemsoftware in recoverymode WiFi and Bluetooth don't work any more. In the Settings it shows me the WiFi categorie grey and I am not able to enter the WiFi settings.It's the same with Bluetooth.

Oh my GOD!!!!!!!!!!!!!!!!!!!!!!!! IT actually worked for me. Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

WIFI doesn't work after IOS5...

Brand new iPad2 can't connect to wifi after the update.
I was using a 63 character passphrase WPA2 Personal AES that worked great on IOS4.
Now it tries to connect forever (small flower) without being assigned an ip address.
I'm using dd-wrt on the access point.
Any ideas guys?
Apple, my Google Nexus One is working fine and my Microsoft Windows computer.

Hello johnnyh494,
Wifi is an excellent way to supplement additional data needs. I’m always streaming internet radio, YouTube, and update apps on wifi! Not to mention, the device uses less battery power when on wifi, which is another advantage that isn’t often identified. It will be my pleasure to assist in getting your wifi connectivity working for you.
May I ask what company is the provider of the wifi service that you are using? Also, what security setting are you using? It’s traditionally recommended to use WPA2 for the security settings for home wifi networks. On the device, you are not having any data connectivity issues with 4G, correct? If not then I would recommend a hard reset on the device. Below is a link on how to do so on the Droid 4.
http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=51224
As always, I recommend backing up all personal information prior to completing the hard reset. Contacts can be saved using Backup Assistant Plus. Also, contacts and calendar entries can be archived on your Gmail account. Once the reset has been completed, there is a brief tutorial on how to activate and setup the device. After completing the tutorial, please test all voice and data services as well as the wifi functionality. Please post your findings as I am eager to know the results.
Thank you…
ArnettH_VZW
Follow us on Twitter @VZWSupport

Wifi doesn't work after Yosemite upgrade

I upgraded to Yosemite. Now Wifi connects and immediately disconnects. Chatted with support and none of the proposed fixes work.

See http://forums.macrumors.com/showthread.php?t=1802327

Display doesn't work after sleeping.

I have a trouble, after I put my notebook in sleep mode, it doesn't wake up, but the leds are working. I have to shut it down manually from the button, that is not so good.

Hi @m1do ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion 15-n057sr Notebook PC and issues with the sleep mode. Here is a link that goes through some troubleshooting steps to resolve the sleep issues.
Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system making sure your system is up to date, as this could cause this same issue.
Please let me know how this goes.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

M3800 Developer Edition: wifi doesn't work after sleep

Similar Messages

Maybe you are looking for