M400 cannot output 1680x1050 to external 20" Wide monitor

Hello,
WE've juste purchased 2 Protege M400 and 20" Wide (1680x1050) monitors to go with it. Thr problem is that the current driver provided by Toshiba doesn't seem to have this resolution. The graphic hardware is perfectly capable of handling though, since it goes up to ~2000x1500 and is compatible with wide screen displays and digital TV.
This is a high end laptop with all the latest technology.
I'm quite sure it's a driver issue, I've tried several from Toshiba and Intel without luck.
Any ideas ?

Hi
I agree with you. According the users manuals this resolution is not supported (Appendix B Display Controller and Modes). Sorry but if the original Intel driver can not help I dont see there other solution.
Have a lot of fun with this nice unit!!!

Similar Messages

Satellite Pro U300: DVD issue - error: cannot output to external monitor

Hi,
I was having problems playing a dvd on my U300.
Basically the software would load but when I tried to play the dvd it said "cannot output to external monitor".
Having gone through all options I could not find anything to stop this happening. I then downloaded the latest software from the toshiba site.
dvdpl-20070807102909.zip
I resintalled this but got the same error message.
I then uninstalled the software and tried to reinstall but now it just produces an error mesaage saying it cannot intsall the software on this computer.
How can I reinstall this?
Regards,
Mark

I presume you have received the Toshiba Recovery CD. Am I right?
On this CD you can find the Toshiba image file. This image contains the Vista OS, Toshiba drivers, tools and additional software.
But note; you cannot install only a single program. To reinstall a application from the Recovery CD you have to format the HDD and have to reinstall the whole OS using the Recovery CD.
As Gipsyman said, the Toshiba driver page contains update and the original preinstalled software is needed.

Customs document type cannot be determined for external document Type F8

Hello Experts
Need help
I am trying to transfer F8 to GTS 10.1 and getting following message in GTS Transfer log for export:
Customs document type cannot be determined for external document Type F8
New implementation
GTS 10.1 running with SP 12
ECC side Plug-In settings are fine. BAdi is Active.(There is no document mapping for F8/CUSDEC as it is not required in 10.1)
GTS side configurations are also fine. Checked several times by 4 sets of eyes!!
(Include general settings configurations, Customs communication configurations:)
(Defining technical medium, conditions/output parameters, defining messages for communication process,
defining determination for activity sequence and control settings for communication process)
Despite this I am not able to trnasfer F8 successfully
Can someone throw some light on this issue please?
Keshav Murthy
[email protected]

Hi Dhilipan
Here we go..
You asked me to check the following
Please check following things
1) Legal regulation is activated. - Yes Activated
2) Process template assigned to the legal regulation - Yes Assigned
3) Activity Sequence determination - Yes done
4) Open the activity sequence in under Control settings for Communication processes and check if there is a document type assigned to it. Table- /SAPSLL/TLEPAF - Yes done.
It is really puzzling.
Thanks
Keshav Murthy

Cannot output HDV seq to tape

I have a Z1 camera connected via Firewire, and am trying to Print to Video a 1080i50 sequence. The inputs on the camera are set correctly. I have successfully printed to video many times in DV format - this is the first time I have attempted to output in HDV. I am using FCP v6.0.6.
In the A/V devices tab of Audio/Video Settings, in the Video Output list, I am only given the option of None, or Digital Cinema Desktop. All the flavors of HDV are listed, but are greyed out. Also, if I uncheck Different Output for Print-to-Video, it resets itself to checked the next time I look. I cannot set the View/External Video to All Frames - it remains set at Off no matter what I do. I suspect that here is the root of the problem - the video is not getting out of the computer to the recording deck.
I have only one external drive containing the sequence footage connected to the computer - I have previously experienced problems when multiple drives were connected.
Does anyone know where I may be going wrong?

Jim: Sony HDV 1080i50 is set as the device control, although I don't think device control is used when printing to video. The recorder is started manually.
Thrillcat: The settings are correct on the camera for HDV when trying to record an HDV sequence, and yes, the sequence is HDV. I can successfully connect my DSR-11 DV-only deck and record to it from FCP, even recording a DV output directly from the HDV sequence.
Sharon: I'm checking the A/V devices settings right before I go. The problem seems to be that although FCP is acknowledging there is an HDV device connected, it is not letting me connect to any of them (the list of HDV device options is greyed out). Consequently all subsequent actions will not work (like selecting All Frames in the View menu). I need to find out why that list is greyed out.
If I check Different Output for Edit-to-Tape/Print-to-Video, the list of HDV devices is available, but I get a warning asking me to check external connections to the device, (as this output does not go to the Firewire output and I have no alternative video card installed). If I try to proceed further, I get a warning that "The sequence is not compatible with HDV Print to Video". However, the sequence is a correct 1080i50 sequence.

Cannot hear audio from external iSight

My machine is a 2007 Mac Pro octo, 16GB RAM, OS 10.5.2. Software Update reports the system as up-to-date.
I just got an external iSight webcam. It's recognized by System Profiler as model 0x8, revision 1.0.3. (For unknown reasons it's reported as having four sub-units and a 200MB/sec connection speed.) iSight Updater reports the unit as up-to-date.
Its video appears in iChat's (4.0.2) video preview window, and the video's quality is acceptable. The audio meter at the bottom of the preview displays a signal that varies in response to the sound level in the iSight's environment.
The iSight appears in System Prefs/Sound as a FireWire input. The display there varies with the environment's sound level, and is responsive to changes in the Input Volume setting on the same screen.
The iSight shows up in Audio MIDI Setup as a fixed one-channel, 16-bit, 48kHz audio source.
The above tells me the iSight is producing an audio signal. Nothing I've been able to do, however, has permitted me actually to hear this audio signal. Whether I select the Mac Pro's built-in output, its built-in line output, or an external FireWire audio interface, I cannot hear the iSight's audio. Using these same configurations, however, I can hear audio from QuickTime Player or any other audio app I've tried, as well as all system alerts. The problem seems to lie in the signal's routing.
I've followed this forum's maintenance and troubleshooting guidelines, including isolating the iSight on the FireWire bus and repairing permissions from a second 10.5.2 start-up drive.
I've spent several hours searching for clues about what might be happening, but have exhausted the suggestions I could find.
Does anyone have any further thoughts on how I might go about capturing this camera's audio signal?
I'd appreciate any assistance that gets me there.
Thanks.

Hello Hominahomina
You sound like an experienced Mac user, and you have tried most of the things that can cause this problem. You probably have already checked to be certain that your iChat > Video > Microphone Enabled has a check (tick) mark.
If so, the next suspect I can suggest for your consideration is a possible hardware or software conflict with your "external FireWire audio interface". Disconnect it and test iSight audio again. If it still does not work, uninstall any software that was installed with your audio interface and try again.
If that does not help, you can use any of the suggestions from How to test your iSight to ensure it is functional that you have not already tried.
If, when you play back the file, you can hear the sound recorded with your iSight using iMovie (4 or later), QuickTime Pro, or some other app that can record audio, your iSight itself cannot be the problem. You may have a corrupted iChat preference file. Try this:
• quit iChat if it is running
• delete your Home(User)/Library/Preferences/com.apple.ichat.plist file.
A new .plist file will be created the next time you launch iChat, but deleting the .plist file deletes several iChat preference settings, so those you want to be different from the default values will need to be reset.
If all else fails, your external iSight likely needs help form an Apple Service Technician. The external iSight you bought is likely not covered by Apple Warranty. If the seller is not providing you service guarantees or warranty, you may be want to check Apple's iSight Service: Frequently Asked Questions. If your external iSight needs parts that you or your Service Technician cannot locate, http://www.synaptech.com may be able to help you obtain those that are still available.
BTW, your posted system info shows Mac OS X (10.4.10), but you say that you repaired permissions from "a second 10.5.2 start-up drive." Hopefully, your posted info merely needs to be updated. Although we must start from a different disk to repair a disk, I am sure you know that we repair permissions on a startup disk using its disk utility when started from that drive. For benefit of less experienced readers, don't repair permissions for a disk with one Mac OS version (like 10.4.x) when started up from a different Mac OS like 10.5.x because doing so can cause serious permissions problems.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2) External iSight

PO output medium as 'External Send' for Language BG giving '#' instead of character in PDF output

Hi Experts,
When we maintain the PO output medium as ‘External Send’ for Language ‘BG’, the PO pdf is showing # instead of character.
But, if the output medium is PRINT and language is ‘BG’, the PO pdf prints correctly in BG language.I have checked the output type
NEU and find that same smartform is maintained for both the case.
Also it is working fine in the Quality as well as in development server.. issue is coiming only in PRD.
Thanks in advance!!
Regards
Mrinal

Hi,
PLease review the steps from SAP note 191470.
Best Regards,
Arminda Jack

TV off audio output possible to external sound system?

One thing i like about ATV2 is the ability to ;isten to my itunes music.
I havnt bought one yet but wanted to know if it is possible and if so how to have the TV turned off and audio outputed to my external speakers? My current speakers are not SPDIF just anolog inputs
It would seem crazy to have to run the TV screen while I was just listening to music. My TV has HDMI inputs and looks like an optical in as well.
Any comments on best way to set this sort of thing up or do I have to have the TV on?

Yes.. If you have a separate av receiver powering your speakers (even if it passes the video signal through). if you just plug external speakers into the TV you turn them off when you turn off the TV.

T430 cannot duplicate desktop on external display

I am having a problem with my brand new T430.
I have purchased a miniDP to HDMI adapter, if I connect the adapter to my thinkpad and then an HDMI cable from the adapter to the external monitor it will correctly duplicate the display. However when I use the Fn to switch between duplicate, extend etc. I cannot get it back to successfully duplicate. If I disconnect the adapter and reconnect it will still not duplicate the display.
If I enter the monitor properties on Windows 7 the internal display is labelled as display 1 and 2 whereas the external display is labelled as display 3. I can only duplicate 1 to 2 so cannot duplicate to the external device. If I extend my display it will display on the external device as expected and if I select external only it works fine.
Anyone else experienced this?
This is my spec:
i7-3520M (3.6GHz)
8GB Corsair Vengence RAM
250GB Samsung 840 SSD
14in 1600x900 HD+ LCD
NVIDIA NVS 5400M 2GB
Win7 Pro 64
Thanks
Solved!
Go to Solution.

I called Lenovo and they helped me resolve the issue.
It is a known bug with the HD4000/Nvidia switchable graphics, Windows is not able to control the clone display so in order to clone the display you must open Nvidia control panel, goto setup multiple displays, if the internal monitor shows as 'Laptop Display' and 'Analogue Display' then untick Analogue display. Make sure the external display is ticked, right click the Laptop Display and select Clone and clone to the external. Then click Apply at the bottom of the screen.

Ipad1 running ios5 cannot output screen through vga adapter

My iPad running ios4 is able to project its screen output onto a projector using the vga adapter.
After upgrading to ios5, projecting onto a screen is not possible. The projector screen remains blank after connecting the vga adapter.
The same adapter and projecter were used for a iPad 2 and the projection is fine.
Confirmed this is a problem with iPad running ios5.

Why not use a DVI output, almost all external displays have DVI or HDMI input.

Outputting currency in external format???

I am doing project for an external client. (China). I was outputting some currency values in report. I a mworking from india. Now i am getting warning that i should output currency in external format?? What does that mean???
Rakesh

Hi,
The format currency depends on the user parameters.
You can use the WRITE statament, and the system automatically will write the currency in according to the user parameters.
You can try to use the statament SET COUNTRY <COUNTRY>, set all formats (date, currency) used in a country. In this way your program should be independent from user parameters.
Regards,
Satish

Cannot output 5.1 audio on HDMI after installing Windows 7

Hi All,
I have Pavilion dv7 1270us, which came with Windows Vista x64. I've managed to watch DVD Movies and Blu ray discs through the HDMI-output, having multichannel audio as well (5.1)
I thought that it was time for a Windows upgrade. This week I've purchased a copy of Windows 7 Professional, formatted my harddrive and installed my new Windows. After that I browsed HP's driver page to download my missing drivers.
Everything looks good now, except the fact that I cannot output multichannel audio to my amplifier now.
Firstly, I thought that this could be a codec issue, but it isn't. This is what I've found in my Sound settings - Windows says that my HDMI supports only 2 channels:
Am I missing something? A driver maybe or a setting? I looked at all possible settings and I am almost sure that the problem isn't there.
Please help!
P.S. I forgot one more thing. When my laptop was running on Vista, it was "smarth enough" to automatically choose the HDMI sound output for default sound device when I connect my HDMI cable, and the opposite - select "speakers" on disconnect. Now it does not.

As stolen from someone on another forum, "Basic windows sound will always be 2 channel with HDMI. It is only when a DD/DTS/LPCM signal is bypassed to the receiver that you get 5.1 or greater." Basically, set your HDMI as your Default Device, restart the computer, and test to see what happens.
Assuming this does not solve your problem, looking up your driver page shows that your current set of drivers are out of date. You can go here to download the newest set available from HP:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75858-1&lc=en&dlc=en&cc=us&...
Good luck!
Though I am an HP employee, I am not here as a representative for them. I am here of my own accord to help those requesting it.
Please demonstrate any appreciation for help with a kudos!

Exchange 2010 - Users in a restricted OU cannot login to OWA externally only - internal works

I have an OU setup where user in this OU have Log On To... rights have restricted which computers they can log onto.
This is the only restriction other than some IE browsing settings via GPO. The problem for these users is that...
They cannot login to OWA externally using the https://mail.domain.com/owa - it continues to prompt for authentication.
They CAN login to the same URL internally.
Troubleshooting...
I did give them Log On To... the MAIL SERVER rights.
Other users can login that are NOT in this OU.
May have started after SP3 for Exchange was installed.
Have rebooted.
HELP?

Hi,
The Log On To setting will specify a certain computer to access a user account. Please change this user can log on to
All computers in ADUC to have a try.
Thanks,
Winnie Liang
TechNet Community Support

I would like to ask about imovie. my project cannot output and how can i divide my project in imovie into two part??, i would like to ask about imovie. my project cannot output and how can i divide my project in imovie into two part??

i would like to ask about imovie. my project cannot output and how can i divide my project in imovie into two part??, i would like to ask about imovie. my project cannot output and how can i divide my project in imovie into two part??

Go to the Project Library View and select your project.
Then FILE/DUPLICATE PROJECT and give the duplicate a name like "your name - part 1".
Then duplicate it again and give the duplicate a name like "your name - part 2"
Now you can open "part 1" as a project and delete everything that is in part 2.
Open "part 2" as a project and delete everything that is in part 1.

PC cannot recognize iMac's external Hard Drive on network

I have a network with my PC and iMac. The iMac has an external hard drive that I recently added. I can see my PC from the Mac and I can see the iMac from the PC. What I cannot see is the external Hard Drive connected to the Mac from my PC, only the normal folders on my Mac. Can't find anything to allow me to do this.
Any ideas?
iMac Mac OS X (10.4.3)

Before I tried the software suggested I spoke with my son who finally gave me a script to enter in terminal which added the external drive as something that would be recognized. After a few tries it actually worked and I can read and write to my external drive from my PC. Thanks for the advice and assistance.
Now I just have to figure out how to get iLife 06 to load as it keeps crashing my Mac. Tried 6 times and now I have no iPhoto nor the iWeb, 2 of the 3 programs I really need and use!
Happy "Mac"ing.

Satellite U305: cannot watch videos on external monitor running Vista with Dynadock

Hi Fellows,
I have one Satellite U305 running Windows Vista, I bought also one Dynadock VGA with external HP 20" monitor.
I have uppdated all Dynadock drives (Audio, Video, etc) to the latest version, but DVD Video or MPEG Video recorded with my camera is no possible to watch on extended monitor only in the primary monitor (notebook monitor).
For exemple my Toshiba DVD Player works normally on Notebook monitor but when I transfer the window to extended monitor, Toshiba DVD Player stops to work.
Video doesnt work on extended monitor.
Is it correct or Do I made something wrong configuration? Is it a bug? If it is a bug, how to solve this bug?
I am worry because I bough a big external monitor to watch some movies that I can not watch it.
Thank you in advance for your assistance.
Nilton

I am sorry that I have to tell you that mate, but it wont be possible to watch any kind of realtime content through your dynadock. It is not designed for that.
The USB-Connection has not enough bandwidth to transfer this amount of data that is needed to have a "real" dvi / vga picture on our monitor. It is just made for Office use, e.g. E-Mail, Word etc.
If you can, bring it back and look for another solution...

M400 cannot output 1680x1050 to external 20" Wide monitor

Similar Messages

Maybe you are looking for