M40X-233 Don't Wake after Suspension or Hibernation

Hi to All,
I have a M40X-233 and the problem is: The machine don't wake up after suspension or hibernation.
When system suspend the power button lits flasing red.
When press power button agian system dont wake anymore.
The only solution is remain pressing until power off.
Already uninstall all Toshiba Power Saver related components
and install agian with lastest version and problem persist.
Any sugestion will be very welcome.
Many Thanks
Artur Oliveira

Hi,
Before you do a full recovery, check this driver out and see if it helps.
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=161&selProduct=583&langua ge=13&selOS=10&selType=all&yearupload=&monthupload =&dayupload=&useDate=null&mode=allMachines&search= &action=search&macId=&country=all&selectedLanguage =13&type=all&page=1&ID=37689&OSID=10&driverLanguag e=13
Have a nice day.

Similar Messages

Mac Mini mid 2011 Mountain Lion sleep and don't wake after +/- 6h of sleep

Hello all.
I Have a Mac Mini mid 2011 with Mountain Lion 10.8.5. connected to Wi-Fi network with Time Capsule, with back to Mymac enabled as well as ssh.
The power save is set as default to wake up on lan, put to sleep the disks as nedeed.
It works fine , and i can wake him up by back to mymac or just ssh to until +/- 6 hours of inactivity, after I Can't wake him up unless by bluetooth or with the power button.
I had made a fresh install but it works realy the same.
Before update to Mountain Lion , it was working fine.
Can someone help me
Thanks in advance.
PC

You don't need an expensive USB keyboard, a £10 Logitech UK - Keyboard K120 will work just fine for booting into the Recovery Partition to Repair or Reinstall OS X.
Also see > OS X: About OS X Recovery

Satellite A100-498 crashes after suspension or hibernation

Hello everybody
I just bought a brand new satellite A100-498, and just realised that each time I leave the computer for a while, and it needs to go into hibernation or suspenson, it goes, but when I get back and try to restart, it starts to restart, but it crashes right after with a black screen (in hibernation) or in the desktop (suspension). i tried to modify tye settings on the Toshiba powersaver, but it still happens...
can anyone help?
Thanks in advance

Hi Helena,
Try to install new VGA and chipset drivers.
I think that will solve the problem.

Problems installing Video Controller on M40X-233

I have a Toshiba Satellite M40X-233 and have the following problem: After buying it, I went to this site to get the most recent drivers for my laptop. Everything installed ok except the Video Controller. After installing this one (Intel controller), it requested that I'd reboot the machine and after, it could not login, saying there was not enough resources to load the login profile. I could only correct the problem by loading in Safe Mode and unistalling the #$%& driver. After that, I tried to install the old drivers that came with the laptop, but the behaviour is the same... So now I uninstalled it and do not have any video controller, which is really bad, but hey, at least I can work... does anybody have the same problem? How to correct it?
regards,
Carlos

Hi
Firstly what I want to know is why you updated all your drivers after buying a new notebook? In my opinion the new notebook should works properly and it should be not necessary to update anything.
Secondly, the graphic card you can check in the device manager.
That should you know. But I have also checked this informations about this unit a this notebook has a Mobile Intel 915GM Express Chipset AlvisoGM graphic card. In this case you need a Intel graphic drivers.
On this website you will find a necessary driver.
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

[Solved] Freeze after suspension with linux-ck

Hi all, like i said in the subject, my laptop freezes when I try to wake it up after suspension. I'm running a linux-ck-atom-3.17.3-2 on a eeepc1005PE with intel video drivers.
I read several others topics on the argument and it seems that there isn't a good solution (just change kernel), so i just wanted to point it out.
I tried to add to the kernel line
i915.i915_enable_rc6=0
but it didn't work at all.
Same problem with the offical kernel after the upgrade at the 3.17.3 version. With the 3.17.2 it's all ok, so just a downgrade works well. Everything works well also with the lts kernel.
Thanks and bye
K.
Last edited by kratze (2014-11-25 22:25:53)

just 3 posts ahead of you, we recommend to downgrade the kernel https://bbs.archlinux.org/viewtopic.php?id=190013
adjust the /etc/pacman.conf file like here:
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
IgnorePkg = linux
#IgnoreGroup =
with pacman -Syu you will see then when kernel 3.17.4-1 comes and can try with that version
Warnung: linux: Ignoriere Paket-Aktualisierung (3.17.2-1 => 3.17.3-1)

Fn+b keys don't work after installing Win7 Ultimate (HP Envy 14 BE)

Fn+b keys don't work after installing Win7 Ultimate (HP Envy 14 BE) --not able to use the Beats Speakers. Any software updates I need to install?
This question was solved.
View Solution.

Hi Jim,
You're welcome
Is the version of Windows 7 Ultimate you have installed 32bit or 64bit?
Open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers - do you see an existing entry for the IDT High Definition Audio CODEC listed here?
There is an alternative IDT Audio driver you may wish to try on the following link.
http://ftp.hp.com/pub/softpaq/sp53001-53500/sp53281.exe
Let me know if you get the same error with this version.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Buit in ethernet don't work after installing Lion

Built in ethernet don't work after installing OSX 10.7 on my MacBookPro 2.4 Ghz Intel Core 15.
Someone else has the same problem?
On my MacPro 2 x 2.6 GHz Dual-Core Intel Xeon it's not working good, i have to do a restart to get internet connection.
Is there somebody who has te same problem and has a solution?

Something does look odd to me unless it's a typo in your post.
This look like what I'd expect from the NetGear Router - not form the modem. That is when You browse the router stats (http:/192.168.1.1)
I work with a modem with te folowing preverences:
Wan IP address    87.211.205.210
Lan IP address     192.168.1.1
Primery DNS server       62.58.50.5
Secondary DNS server   62.58.50.6
and a separate router Netgear WGT624v3
This is not exactly what I would expect from System Preferences/Network
the system preferences for the network are
Configure       by DHCP
IP address     192.168.1.15
Subnetmask 255.255.255.0
Router           192.168.5.1 <<<<<<<<<<< this should be 192.168.1.1??????
DNS              208.67.222.222
                     208.67.220.220
The Router address in System Preferences/Network should be the same as the LAN IP Address. In this case it's on a different network.
If this is not a type then this is a problem!
Not sure how it got to be that way.
Does it persist when resetting the modemand router?/
Steve

IPhone 3GS apps don't work after 4.3 upgrade

Some apps like mail, safari, app store, ipod don't work after upgrading to iOS 4.3. itues is up to date and have never had issues before. tried to downgrade to 4.2 but was unable to. Help!

I have the same issue, half the apps no longer work, just stays in 'updating' mode. I've tried uninstalling some but now the app store is freezing. THe ones I am able to reinstall give me error message saying I'm not logging in correctly (I am). I'm guessing some apps versions aren't compatible with the new software but a few I was able to use after the software update and now I can't

All Mac apps don't work after cloning on new hd.

All Mac apps don't work after cloning on new hd.
I used CCC to clone 10.6.8 then onto new drive. Everything works BUT all Mac apps.
Error: You can't open the app(s) because it is not supported on this type of Mac. (On MacBook 2011)
Thanks for your help.

All good. Just drag and dropped each application and they worked until I did a restart. Then repaired permissions and everything works.

My apps don't work after synching music files from my PC

My apps don't work after synching music files from my PC through Itunes....though all the apps are shown in the Apps window in Itunes (The Apps match the iTunes account on the iPhone).....
Disconnecting after the sync and After downloading any app from Appstore through Wi-Fi all my apps start working.....
Please Help.....

What happend is your phone forgot it was authorized to work with items associated with your apple id. If it happens again, download any free app to prompt the sign in, once you install the free app the others should work.

Card reader don't work after installing win 7 ultimate on pavilion dv-6 1260ej

card reader don't work after installing win 7 ultimate on pavilion dv-6 1260ej.
Tried downloading this driver:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75456-1&cc=il&dlc=he&lc=he&...
still dont work.

Hi,
Download and install the Chipset driver on the link below.
ftp://ftp.hp.com/pub/softpaq/sp45001-45500/sp45041.exe
After the installation has completed, restart the notebook.
Next, download and install the Card Reader driver on the following link.
ftp://ftp.hp.com/pub/softpaq/sp45001-45500/sp45046.exe
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

My ipod shuffle (4th gen) don't works after hard reset with itunes

My ipod shuffle (4th gen) don't works after hard reset with itunes, it don't reads too like USB by Windows.
Before that i've seen error (-50) in iTunes, so i reset ipod.
I've read all tips on this site, but nothing helps me.

No, USB works good. I've tried reset on my friend's PC, and it saw my ipod and reset was done. But when i tried to load music, it wrote me, that i've installed incorrect software.

PL/SQL don't work after install Oracle 9204 patch set

I'm using Oracle 9.2.0.1.
some pl/sql don't work after i install database patch set 3 (9.2.0.4).
code--------------------------------
BEGIN
dbms_aqadm.stop_queue(
queue_name => 'WB_RT_SERVICE_QUEUE');
exception
when others
then
null;
END;
error message is: ora-03113 end-of-files on communication channel.
please help. thank you !!

Can you please tell me the soluation of this problem as I am also facing the similar problem ?
Thanks in advacne ?
Regards
Satpal

Webmail in Safari don't work after updating to iOS6.

Webmail in Safari don't work after updating to iOS6. Logging on to office webmail account are redirected. Webmail works with Google Chrome, but it doesn't sove the issue with Safari. Any suggestions on how to configure Safari?

Try this
I was having this problem, seem to happen when waking computer, once finally connected network works great.
You need to edit your network preferences to order the network selection list. Goto this support page Using network locations (Mac OS X v10.6 and later) and edit your selection list.
I also created a "HOME" location and deleted all networks except wifi. Put MB to sleep woke and safari worked great. Still I re-ordered the networks under Automatic putting wifi at top, sequence is from top down. Don't forget to click Apply. Have fun

Illustrator cc don't start after the new update

Illustrator CC don‘t start after I update this. I should loading the font Verdana, but Verdana is activ. What can I do now?

saure sahne,
Are all the faces of the Verdana and Tahoma fonts installed and enabled/active?
Did you receive a message about Verdana?
Is your OS Mac OSX 10.6.8? If so, you will have to upgrade that or roll back the update. You can see instructions for the latter here:
http://prodesigntools.com/adobe-cc-version-control.html

M40X-233 Don't Wake after Suspension or Hibernation

Similar Messages

Maybe you are looking for