M45-S331 no history of issues... 2 right usb ports and the touchpad have stopped working.
Hi,
I'm really starting to give out of things to try to figure this out. So this laptop was bought, brought home and sat on a little table and has been handled delicately. I was happy to get it and it's never had an issue. Like the title says, now the USBs on the right side (single left usb functioning) and the touchpad have just stopped doing anything. I can't really say for sure exactly what was going on before it started to do that... I'm thinking it was working, I shut it down and maybe a day later I powered it up and noticed it probably as I was trying to log in. I have: checked connections, board contacts, drivers, reinstalled windows... so I mean at that point there's probably nothing I can do... but all seems fine with the equipment from what I can see looking at it, add in the fact that the two aren't really exactly the same so for them both to go like that is odd... I just want to know what I'm not thinking to do as far as troubleshooting it...
I don't know if there's anything else I can provide, but if there is I'll have it...
Thanks.
I'm beginning to think there's not too much more I can check. I still think it's odd that the 2 usbs and the touchpad go out at the same time.
Similar Messages
-
Hi guys well huge issue my Ipod 4th generation shuffle died and I tried to chrge it I plugged it into the USB port and the red light came on and after 5seconds turned off the whole Ipod is dead and I've tried in wall chargers as well that doesn't charge what should I do is there a solution or should I claim my warrenty and have it fixed??
Also my Itunes and computer won'r reconize it
-
2010 i5 MBP USB Ports Not The Same? Griffin iMic Issue
I have a 2010 15" i5 MBP. I got one of the white iMics and it works fine on the port thats closest to the screen. However, when I plug it in to the port that's closer to the SD slot, it doesn't work. Under the audio settings screen, I see the iMic under Input, and the slider is to the right, but the VU meter doesn't register anything. However, when it's in the USB port by the power adapter, it works as it should.
I have read that certain model MBPs have USB ports that are not the same, and some people have problems with programs like Serato when it's plugged into the front port. Traktor and Serato have even mentioned that on the MBP there is one "good" port and one "bad" port.
Curious if anyone else noticed this. Again, it seems to only affect 2010 i5 MBPs.Hi WebBrowser2,
As I understand your query its not a single doubt you are having at all, actually it’s a bunch of multiple doubt you are carrying here in your mind allied to Mac Book Pro (USB Ports are not working). There might be various reasons behind- not working of USB ports in Mac Book Pro, as you already had searched out various ways to fix all your issues. A few months ago, I faced the same issue as my USB port was suddenly stopped to respond, then I also tried to find various ways to get rid of this issue, and I found an informative blog link which has fixed this issue and make me tension free.
For more information visit at- http://www.olmtopsts.com/blogs/when-macbook-pro-usb-ports-not-working.html
And I am hoping- it will assist you in the same way as it assists me. -
I have plugged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?
if the device I connected have caused this, shouldn't the macbook itself have some type of protection that should prevent this from happening.
because when I took it to an apple certified maintenance shop, the guy said that now it could only run while connected to the power. it won't run on batteries. and that I have to change the motherboard.
can I just replace the damaged part only, would apple consider this as a design issue and they could pay for it, or should I just buy a new motherboard for 800$.
Help.BB1B2,
The problem is in finding a tech shop that will/can do board level repairs on Macs. They are few. And I certainly wouldn't spend $800 on a new logic board - I would replace the computer if I had to pay that much!
You could call around to a few repair shops and see if they feel competent to isolate the problem and do a board level repair - but I'm afraid, in the end, that your search will be futile.
Sorry,
Clinton -
Right USB Port stops working after disconnecting device since 10.9.2
Hi,
Since updating to 10.9.2 the right USB port on my MBA stops working after diconnecting a device (tested: external hard drive, USB flash drive, USB HSPA Modem). The only way to get the port recognizing the device on that port is to do a restart. If the device is connected from starting the MBA it works fine, if I then eject the drive and reinsert it or a different USB device the device doesn't get recognized. The devices do get power, my WD passport ultra spins up just fine, the USB HSPA modem also indicates it's working (with signal) but nothing shows up in finder or diskutility. If the modem is connected from start (and thus working) and then disconnect from the internet but not remove the drive I can reconnect to the internet. The problem only occurs after disconnecting the device. The port becomes inactive. The left USB port works as expected.
Steps I've taken:
Disk Persmission
PRAM
SMC
Reapplied the 10.9.2 update
Sent feedback to Apple
Some Output:
Boot Mode: Normal
Total CPU usage:
User 11% System 10%
Max %CPU by process (name, UID, %):
WindowServer 0 4.6
Loaded extrinsic kernel extensions:
at.obdev.nke.LittleSnitch (4052)
com.driver.JRDUSBModemData64 (4.0.5)
com.protech.NoSleep (1.3.3)
Loaded extrinsic daemons:
net.sourceforge.MonolingualHelper
com.oracle.java.JavaUpdateHelper
com.oracle.java.Helper-Tool
com.microsoft.office.licensing.helper
com.freemacsoft.appcleanerd
com.adobe.fpsaud
at.obdev.littlesnitchd
Loaded extrinsic user agents:
com.oracle.java.Java-Updater
at.obdev.LittleSnitchUIAgent
/Library/LaunchAgents:
at.obdev.LittleSnitchUIAgent.plist
com.oracle.java.Java-Updater.plist
/Library/LaunchDaemons:
at.obdev.littlesnitchd.plist
com.adobe.fpsaud.plist
com.freemacsoft.appcleanerd.plist
com.microsoft.office.licensing.helper.plist
com.oracle.java.Helper-Tool.plist
com.oracle.java.JavaUpdateHelper.plist
net.sourceforge.MonolingualHelper.plist
/Library/PrivilegedHelperTools:
com.freemacsoft.appcleanerd
com.microsoft.office.licensing.helper
com.oracle.java.JavaUpdateHelper
net.sourceforge.MonolingualHelper
Extrinsic loadable bundles:
/System/Library/Extensions/JRDMassStorageDriver32.kext
(No bundle ID)
/System/Library/Extensions/JRDMassStorageDriver64.kext
(No bundle ID)
/System/Library/Extensions/JRDUSBModemData32.kext
(com.driver.JRDUSBModemData32)
/System/Library/Extensions/JRDUSBModemData64.kext
(com.driver.JRDUSBModemData64)
/System/Library/Extensions/LittleSnitch.kext
(at.obdev.nke.LittleSnitch)
/System/Library/Extensions/NoSleep.kext
(com.protech.NoSleep)
/Library/Audio/Plug-Ins/Components/A52Codec.component
(com.shepmater.A52Codec)
/Library/Internet Plug-Ins/Flash Player.plugin
(com.macromedia.Flash Player.plugin)
/Library/Internet Plug-Ins/JavaAppletPlugin.plugin
(com.oracle.java.JavaAppletPlugin)
/Library/PreferencePanes/Flash Player.prefPane
(com.adobe.flashplayerpreferences)
/Library/PreferencePanes/JavaControlPanel.prefPane
(com.oracle.java.JavaControlPanel)
/Library/PreferencePanes/NoSleep.prefPane
(com.protech.NoSleepPref)
/Library/QuickTime/AC3MovieImport.component
(com.cod3r.ac3movieimport)
/Library/Spotlight/LogicPro.mdimporter
(No bundle ID)
Library/Address Book Plug-Ins/SkypeABDialer.bundle
(com.skype.skypeabdialer)
Library/Address Book Plug-Ins/SkypeABSMS.bundle
(com.skype.skypeabsms)
Library/QuickLook/Pacifist.qlgenerator
(com.charlessoft.pacifist.qlgenerator)
Library/Services/Clip to Day One.workflow
(No bundle ID)
Login hook:
/Library/Scripts/Hooks/login.sh
Global login items:
$HELPER_PATH
$HELPER_PATH
$HELPER_PATH
$HELPER_PATH
$HELPER_PATH
User login items:
iTunesHelper
Sparrow
Sort Menubar Items
AppCleaner Helper
SurplusMeterAgent
Safari extensions:
Shut Up
AdBlock
SafariKeywordSearch
Disconnect
MapTricks
Restricted user files: 28
Font problems: 0
Elapsed time (s): 130
etrecheck output:
Hardware Information:
MacBook Air - model: MacBookAir3,1
1 1.4 GHz Intel Core 2 Duo CPU: 2 cores
2 GB RAM
Video Information:
NVIDIA GeForce 320M - VRAM: 256 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 0:20
Disk Information:
APPLE SSD TS064C disk0 : (60.67 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
disk0s2 (disk0s2) <not mounted>: 59.81 GB
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
EFI (disk2s1) <not mounted>: 209.7 MB
Radha (disk2s2) /Volumes/Radha: 1.81 TB (1.73 TB free)
disk2s3 (disk2s3) <not mounted>: 189.89 GB
Boot OS X (disk2s4) <not mounted>: 134.2 MB
FireWire Information:
Kernel Extensions:
at.obdev.nke.LittleSnitch Version: 4052
com.driver.JRDUSBModemData64 Version: 4.0.5
com.protech.NoSleep Version: 1.3.3
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] at.obdev.littlesnitchd.plist
[loaded] com.adobe.fpsaud.plist
[loaded] com.freemacsoft.appcleanerd.plist
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] com.oracle.java.JavaUpdateHelper.plist
[loaded] net.sourceforge.MonolingualHelper.plist
Launch Agents:
[loaded] at.obdev.LittleSnitchUIAgent.plist
User Launch Agents:
User Login Items:
iTunesHelper
Sparrow
Sort Menubar Items
AppCleaner Helper
SurplusMeterAgent
3rd Party Preference Panes:
Flash Player
Java
NoSleep
Internet Plug-ins:
Default Browser.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
JavaAppletPlugin.plugin
QuickTime Plugin.plugin
User Internet Plug-ins:
Bad Fonts:
None
Top Processes by CPU:
12% com.apple.WebKit.Networking
6% Safari
4% WindowServer
3% EtreCheck
2% hidd
1% Terminal
1% notifyd
1% opendirectoryd
1% com.apple.WebKit.WebContent
0% Dock
Top Processes by Memory:
147 MB Safari
137 MB com.apple.WebKit.WebContent
49 MB mds_stores
29 MB com.apple.WebKit.Networking
27 MB TextEdit
23 MB WindowServer
20 MB Disk
20 MB Sparrow
20 MB CVMCompiler
18 MB Finder
Nothing out of the ordinairy. Thanks for any helpIt's an Apple Pro keyboard and mouse, the dongle is
plugged into the Mac and not the keyboard. The same
set-up is, and has been working on all our other
Macs.
The sleep issue sounds interesting- hum, maybe...
Is your keyboard plugged into one of the USB connections on an Apple monitor? If so, you may want to change that connection to one that is on the G5 itself. My monitor came with a warning note indicating that problems will likely occur if the keyboard is connected to the monitor.
I also had a problem with the automatic sleep function. After much trouble-shooting and a logic board replacement, it was concluded that coming out of the automatic sleep function with any USB device active would freeze the entire USB bus. After disabling automatic sleep in system preferences, I've had no freezing problems. My machine works fine with the manual sleep function in the Apple Menu.
AndyH -
Imprumut = loan
I have 6 tables:
I have one combobox(from where I select utilizatori(users)) and 2 CheckedListBox(Between first box and second box I have 2 buttons:imprumuta(loan) and restituie(return))
This c# code works just for first user: Utilizator, but something's not good. When I add new utilizator(user) and select it, the loan will be add in my SQL DataBase, but... the book who I selected doesn't move to the right in CheckedListBox and the reason
is that I can't make an return
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using MySql.Data.MySqlClient;
namespace proiect
public partial class Imprumut : Form
MySqlConnection con = new MySqlConnection("DataSource=localhost;UserID=root;database=biblio1");
//stabilim conexiunea
MySqlCommand comUser;//interogarea pe baza careia umplem comboBox
MySqlDataAdapter adaptu;
DataTable userT = new DataTable();
MySqlCommand cmdCarti;//interogarea pe baza careia umplem checkListBox
MySqlDataAdapter adaptCarti;
DataTable CartiTabel = new DataTable();
MySqlCommand cmdCartiImprumutate;//interogarea pe baza careia umplem checkListBox
MySqlDataAdapter adaptCartiImprumutate;
DataTable CartiImprumutateTabel = new DataTable();
public int UserId
get
return Convert.ToInt32(user.SelectedValue.ToString());
void Completez_Combo_User()
try
comUser = new MySqlCommand("SELECT n.userid, CONCAT(n.UserName) as UserN FROM users n left join userroles us on n.userid=us.userid left join roles r on r.roleid=us.roleid WHERE r.roleid='3'",
con);
adaptu = new MySqlDataAdapter(comUser);
adaptu.Fill(userT);
user.Items.Clear();
user.DataSource = userT;
//DataTable din care sunt preluate datele pentru ComboBox user
user.ValueMember = "UserID";
//Valoarea din coloana UserID nu se afiseaza in combobox
user.DisplayMember = "UserN";
//Eelementele afisate in combobox, preluate din concatenarea mai multor coloane
catch (Exception ex)
MessageBox.Show(ex.Message);
void Completez_CheckList_Carti()
try
cmdCarti = new MySqlCommand("SELECT BookID, CONCAT(title, ' ', ISBN,' ',author)as date_carte FROM books WHERE NumberLeft > 0 ORDER BY BookID", con);
adaptCarti = new MySqlDataAdapter(cmdCarti);
adaptCarti.Fill(CartiTabel);
imp.Items.Clear();
//carti.DataSource=null;
imp.DataSource = CartiTabel;
//DataTable din care sunt preluate datele pentru ComboBox carte
imp.ValueMember = "BookID";
//Valoarea din coloana BookID nu se afiseaza in combobox
imp.DisplayMember = "date_carte";
//Eelementele afisate in combobox, preluate din concatenarea mai multor coloane
catch (Exception ex)
MessageBox.Show(ex.Message);
void Completez_CheckList_Cartires()
try
cmdCartiImprumutate = new MySqlCommand(string.Format("SELECT b.BookID, CONCAT(title, ' ', ISBN,' ',author) as date_carte FROM books b inner join userbooks ub on ub.bookid = b.bookid
WHERE ub.userid = {0} ORDER BY BookID", UserId), con);
adaptCartiImprumutate = new MySqlDataAdapter(cmdCartiImprumutate);
adaptCartiImprumutate.Fill(CartiImprumutateTabel);
res.Items.Clear();
//carti.DataSource=null;
res.DataSource = CartiImprumutateTabel;
//DataTable din care sunt preluate datele pentru ComboBox carte
res.ValueMember = "BookID";
//Valoarea din coloana BookID nu se afiseaza in combobox
res.DisplayMember = "date_carte";
//Eelementele afisate in combobox, preluate din concatenarea mai multor coloane
catch (Exception ex)
MessageBox.Show(ex.Message);
void Inregistrez_imprumut_in_BD()
int useridu = Convert.ToInt32(user.SelectedValue.ToString()); //useridu = id book
int bookidi;
try
DateTime azi = System.DateTime.Now; // Data imprumutului
DateTime atunci = termenul.Value; // Data restituirii
MySqlTransaction tranzactie = con.BeginTransaction();
MySqlCommand adaugImpr = new MySqlCommand("INSERT INTO bookshistory(UserID, BookID,BorrowDate) VALUES(@UserID, @BookID, CAST(@BorrowDate as datetime))", con);
MySqlCommand scadCarti = new MySqlCommand("UPDATE books SET numberleft=numberleft-1 WHERE bookid=@bookid", con);
MySqlCommand adauga_userbooks = new MySqlCommand("INSERT INTO userbooks(userId,bookID)VALUES(@userID,@bookID)", con);
adauga_userbooks.Transaction = tranzactie;
adaugImpr.Transaction = tranzactie;
scadCarti.Transaction = tranzactie;
try
foreach (int i in imp.CheckedIndices)
imp.SelectedIndex = i;
bookidi = Convert.ToInt32(imp.SelectedValue.ToString());
MessageBox.Show(bookidi.ToString());
//bookidi va fi id-ul cartea bifata, pe rand din checklistBox
//Inregistrez in tabela imprumut
adaugImpr.Parameters.AddWithValue("@UserID", useridu);
adaugImpr.Parameters.AddWithValue("@BookID", bookidi);
adaugImpr.Parameters.AddWithValue("@BorrowDate", azi);
adaugImpr.ExecuteNonQuery();
adaugImpr.Parameters.Clear();
adauga_userbooks.Parameters.AddWithValue("@userID", useridu);
adauga_userbooks.Parameters.AddWithValue("@bookID", bookidi);
adauga_userbooks.ExecuteNonQuery();
adauga_userbooks.Parameters.Clear();
//Scad numarl de carti disponibile pentru cartea imprumutat
scadCarti.Parameters.AddWithValue("@bookid", bookidi);
scadCarti.ExecuteNonQuery();
scadCarti.Parameters.Clear();
tranzactie.Commit();
catch (Exception ex)
tranzactie.Rollback();
string message = ex.Message;
if (ex.Message.ToLower().Contains("duplicate entry"))
message = "Una dintre carti mai exista deja";
MessageBox.Show(message);
catch (Exception ex)
MessageBox.Show(ex.Message);
void Inregistrez_restituire_in_BD()
int useridu = Convert.ToInt32(user.SelectedValue.ToString()); //useridu = id book
int bookidi;
try
DateTime azi = System.DateTime.Now; // Data imprumutului
DateTime atunci = termenul.Value; // Data restituirii
MySqlTransaction tranzactie = con.BeginTransaction();
MySqlCommand modificIstoric = new MySqlCommand("UPDATE bookshistory SET returndate = @returnDate WHERE userID = @userID AND bookID = @bookID", con);
MySqlCommand adaugCarti = new MySqlCommand("UPDATE books SET numberleft = numberleft + 1 WHERE bookID = @bookID", con);
MySqlCommand sterge_userbooks = new MySqlCommand("DELETE FROM userbooks WHERE userID = @userID AND bookID = @bookID", con);
sterge_userbooks.Transaction = tranzactie;
modificIstoric.Transaction = tranzactie;
adaugCarti.Transaction = tranzactie;
try
foreach (int i in res.CheckedIndices)
res.SelectedIndex = i;
bookidi = Convert.ToInt32(res.SelectedValue.ToString());
MessageBox.Show(bookidi.ToString());
//bookidi va fi id-ul cartea bifata, pe rand din checklistBox
//Inregistrez in tabela imprumut
modificIstoric.Parameters.AddWithValue("@UserID", useridu);
modificIstoric.Parameters.AddWithValue("@BookID", bookidi);
modificIstoric.Parameters.AddWithValue("@returnDate", termenul.Value);
modificIstoric.ExecuteNonQuery();
modificIstoric.Parameters.Clear();
sterge_userbooks.Parameters.AddWithValue("@UserID", useridu);
sterge_userbooks.Parameters.AddWithValue("@BookID", bookidi);
sterge_userbooks.ExecuteNonQuery();
sterge_userbooks.Parameters.Clear();
//Scad numarl de carti disponibile pentru cartea imprumutat
//adaugCarti.Parameters.AddWithValue("@bookid", bookidi);
adaugCarti.Parameters.AddWithValue("@bookid", bookidi);
adaugCarti.ExecuteNonQuery();
adaugCarti.Parameters.Clear();
tranzactie.Commit();
catch (Exception ex)
tranzactie.Rollback();
MessageBox.Show(ex.Message);
catch (Exception ex)
MessageBox.Show(ex.Message);
public Imprumut()
InitializeComponent();
try
con.Open();
catch (Exception ex)
MessageBox.Show(ex.Message);
Completez_Combo_User();
Completez_CheckList_Carti();
Completez_CheckList_Cartires();
//selecteaza_carti_utilizator();
// Initializez termenul din dateTimePicker la data de peste 15 zile fata de data sistemului
termenul.Value = System.DateTime.Now.AddDays(15);
private void imprumuta_Click(object sender, EventArgs e)
Confirmare c = new Confirmare("Confirmati imprumutul?");
DialogResult dr = c.ShowDialog();
if (dr == DialogResult.Yes)
try
Inregistrez_imprumut_in_BD();
MessageBox.Show("Imprumutul a fost inregistrat");
//Dupa inregistrarea imprumutului o parte din carti nu mai sunt disponibile pentru imprumut
//Reincarc in CheckList cu Carti noua lista cu carti ramase dupa imprumut
//Pentru asta "resetez" datele din dataTable cartiT (sursa pentru carti.DataSource)
CartiTabel.Clear();
adaptCarti.Fill(CartiTabel);
CartiImprumutateTabel.Clear();
adaptCartiImprumutate.Fill(CartiImprumutateTabel);
catch (Exception ex)
MessageBox.Show(ex.Message);
if (dr == DialogResult.No)
MessageBox.Show("Imprumutul NU a fost inregistrat");
imp.ClearSelected();
//deselecteaza cartea selectat
foreach (int i in imp.CheckedIndices)
imp.SetItemChecked(i, false);
//debifeaza cartile bifate
//if (imp.CheckedItems.Count > 0)
// //res.Items.Clear();
// foreach (string str in imp.CheckedItems)
// res.Items.Add(str);//adauga in partea cealalta, imprumuta
// while (imp.CheckedItems.Count > 0)
// imp.Items.Remove(imp.CheckedItems[0]);
private void restituie_Click(object sender, EventArgs e)
Confirmare r = new Confirmare("Confirmati restituirea?");
DialogResult dr = r.ShowDialog();
if (dr == DialogResult.Yes)
try
Inregistrez_restituire_in_BD();
MessageBox.Show("Restituirea a fost inregistrata");
//Dupa inregistrarea imprumutului o parte din carti nu mai sunt disponibile pentru imprumut
//Reincarc in CheckList cu Carti noua lista cu carti ramase dupa imprumut
//Pentru asta "resetez" datele din dataTable cartiT (sursa pentru carti.DataSource)
CartiTabel.Clear();
adaptCarti.Fill(CartiTabel);
CartiImprumutateTabel.Clear();
adaptCartiImprumutate.Fill(CartiImprumutateTabel);
catch (Exception ex)
MessageBox.Show(ex.Message);
if (dr == DialogResult.No)
MessageBox.Show("Restituirea NU a fost inregistrata");
res.ClearSelected();
//deselecteaza cartea selectat
foreach (int i in imp.CheckedIndices)
res.SetItemChecked(i, false);
//debifeaza cartile bifate
if (res.CheckedItems.Count > 0)
foreach (string str in res.CheckedItems)
imp.Items.Add(str);
while (res.CheckedItems.Count > 0)
res.Items.Remove(res.CheckedItems[0]);
private void button2_Click(object sender, EventArgs e)
con.Close();
this.Close();
//private void selecteaza_carti_utilizator()
// res.Items.Clear();
// MySqlCommand selectcart = new MySqlCommand("select title from books,userbooks where userbooks.userid='" + user.SelectedValue.ToString() + "' and userbooks.bookid=books.bookid", con);
// MySqlDataReader reader = selectcart.ExecuteReader();
// try
// while(reader.Read())
// res.Items.Add(reader["title"]);
// catch(Exception ex)
// MessageBox.Show(ex.Message);
// finally
// reader.Close();Hello Vincenzzo,
This issue seems to be a window form UI implemented related issue, for this i suggest that you could ask it to the windows form forum:
http://social.msdn.microsoft.com/Forums/windows/en-US/home?forum=winforms
The current forum you posted to is used to discuss and ask questions about .NET Framework Base Classes (BCL) such as Collections, I/O, Regigistry, Globalization, Reflection.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Issues with Win 7 & CS2. Illustrator and Photoshop have "Stopped Working"
Hi, New to this so I apologize in advance. Bought a new computer in December '09. 6gig quad processor and plenty of 500gigs of disc space. NOt a Memory Issue! Installed CS2 ( 'cause the computer took all of my money!) and all worked fine until 4 days ago. I mainly use illustrator and photoshop. When I tried to save a document... The programs simply "Stopped Working" I'm a rookie with the tech stuff so please speak slowly and simply.... I would appreciate any help as I'm losing money and work right now! Thanks
CS2 is totally unsupported under Win 7. And if you have 6 gigs of RAM I'll guess that it's a 64 bit system which simply adds to the complexity.
Sorry, but the best advice you'll get is to upgrade.
Bob -
Right USB port has exactly the same tasks as the left side one?
I v a USB sound cart (MBox 1 by digidesign)
Wen I use togeteher with it an external hard disk connected with USB (some time the fire wire is occupied by another hard disk) if the USB hard disk is on the left side (looking the screen) and the MBox on the right...the hard disk start making a "periodic" sound similar to a metronome and it doesn't run....if I invert the positions it work fine.
Is this normal ? The USB port works fine with the MBOX but with the USB Lacie hard disk is not working....the other USB port is working fine with both.
Is an hardweare problem ? Since my MBP is 2 weeks old I would consider the idea to send it to fix this problem.
tanx
ShiamaThis sounds like the same problem I'm having with my MacBook Pro. For whatever reason the USB port on the left side of the machine does not provide sufficient power to spin up any USB bus-powered hard drive. The USB port on the right side of the machine works just fine for external USB bus-powered devices.
I have sent my system back to Apple to have this problem fixed. Unfortunately, their "repair" did not fix the problem at all. I just got off the phone with Apple again, and they are going to re-repair my system again.
I would suggest that you try an experiment with your USB hard-drive. Just plug it into the left side port without having any other USB devices plugged into the right side. Check if the drive just clicks and does not spin up. Then try the same thing with the USB port on the right side.
If you find that the drive works fine on the right, but not on the left, I would call Apple support for a repair. I do not think this is an isolated issue, but rather is probably a design issue with the systems. The issue should have been caught during testing before the MacBook Pro went into production, but obviously that is not the case. Hopefully if enough people complain about this Apple will take it seriously and fix the problem.
Good luck. -
Lenovo u400 2 usb port on the right isnt working
Hey i recently started using my lenovo u400 and i realized that the 2 usb ports on the right isnt detecting anything. Only the one on the left works.
Hi
Welcome To Lenovo Community
Please try going into device manager and uninstall all the USB ports and restart the system
If it is not fixed please contact Lenovo local service center to have it fixed
Hope This Helps
Cheers!!!
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with Kudos!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
i bought an IPAD air (32 gb wifi only) from USA just one month ago and the screen is not working correctly(picture attached) and right now i'm in Egypt ,can i send my ipad to service in Egypt and the warranty will work in Egypt or what?
Have you tried a soft-reset to see if that fixes it ? You might be able to get warranty service in Egypt for your iPad, but the warranty includes :
IMPORTANT RESTRICTION FOR iPHONE AND iPAD SERVICE.
Apple may restrict warranty service for iPhone and iPad to the country where Apple or its Authorized Distributors originally sold the device.
As it's wifi-only you should have a better chance of it being serviced under warranty, but there are no guarantees, it might depend upon the repairer.
Egypt authorised service providers : https://locate.apple.com/eg/en/ -
My Macbook Pro Retina's USB port on the right side not working at all
Dear all,
I received my macbook pro 15inch with retina display a week ago, but not until today had I got the chance to use the USB port on the right side, only to find out that it is not connecting to anything at all. I have tried to use my iPhone 4 and iPad 3 with two different cables, my USB thumb drive, and my Blackberry 9900, none of them are charging nor shown in iTunes/Finder. All of above works on the left and on other windows machines too.
I'm also not able to charge my Blackberry with the usb port on the left side, thought it would pop up a message saying "charging not supported" on the phone.
For you information, I have applied both updates including the one released few days ago. I have also tried to reset the PRAM. Also, I have migrated from my old late 2008 13inch unibody Macbook using Migration Assistant, not sure if this would affect anything.
I'm aware that there have been reports and discussions regarding the USB port not been able to run devices on 3.0 speed, but I wonder if anyone else have the same problem with me, where the port simply not connecting to anything at all?I also have a problem with the USB port on the right side of my Retina MBP. The USB3.0 port on the left side works fine, even with high speed external SSD enclosures, like the OWC Mercury Extreme Pro 6G which enables me to copy large files at a sustained rate of 160-170MB/sec. Wow USB3.0 and the Mercury SSD is a FAAAAST combination connected to the Retina MBP.
However, like the forum entries about the USB3.0 ports in general on the new Retina MBP, the USB3.0 port on the RIGHT side is plagued with dropping intermittently, disconnecting my external hard drives while copying large files AS WELL AS disconnecting while just sitting there connected to an external hard drive and doing nothing.
Therefore, since I don't feel like returning my Retina MBP and waiting weeks for a replacement, I have chosen to only use the left side USB3.0 port for now.
I have my suspicions about why the right side USB port might be more problematic than the left side one. I found this older post on the internet about how "Not all USB ports are created equal on MacBooks..." that talks about how on older models of MacBooks one of the USB ports shares a USB hub with multiple other devices like the iSight camera etc. therefore making it less tolerant of heavy traffic or something like that. (http://www.wired.com/gadgetlab/2008/05/the-macbook-all/)
Therefore, I wonder if the right side USB port is sharing a USB internal hub where-as the left side one is more 'dedicated' and therefore in my case able to handle the high speed transfers/traffic I am throwing at it with my external SSDs.
I have also read that USB3.0 in general, on non-Macs, has had trouble for years. For instance, some forum entries on Apple Support Communities and other non-Apple forums has made mention that 'they' are not surprised at the problems encountered on USB3.0 external hard drives connected to the Retina MBP because Windows laptops have had a lot of flakey problems with USB3.0 for 'years'.
Also, I have recently purchased a "Buffalo" external Thunderbolt 1TB drive from OWC and have been doing Clones onto that drive for several weeks. I use SuperDuper to clone >600GB of data on my 768GB Retina MBP several times a week. And, I have (knock on wood) not had any problems with the stability of my externally connected Thunderbolt drive.
So, in my case, I am racking it up to high-speed stresses on the USB3.0 ports at least in part...and perhaps the possibility that the LEFT side USB port on the Retina MBP is more dependable and/or a more dedicated USB port than the right side one.
This doesn't really solve your problem, but it may at least help you feel like you are not alone. -
Right USB Port faster than left (MBP 15 2013) ?
Hello guys,
I just installed Drive Genius 3. Im assuming bad sectors on my external hard drive. When I connect the drive on the left usb next to thunderbolt normal scanning says can take up to 8/9 hours.
Plugging it into the right USB port only says around 3,5 hrs.
Is there a difference in speed?
One more question:
Dont all new drives have SMART? My latest WD Elements says it has no SMART Status. So I cant find out any bad sectors except by doing a scan with Drive Genius?The thing is, when I use an adaptor with the keyboard, it works fine in Logic. But the USB port cant seem to power the keybaord like the left one can. Could the USB port on the left really be broken if it is working with Logic with the adaptor?
-
Macbook Pro right USB port disconnects
Hi - When using the dialup modem adapter in the right USB port it will disconnect after 3-4 minutes but works fine in the left port. Flash drives & scanner seem to work OK in the right.
Also, a friend has computerized embroidery sewing machine and the right port does not recognized it but the left does on her MAC.
Are Macs were bought a couple weeks apart.
Is there a setting for each USB port that maybe wrong or is this just a defect?Well, does that link...
http://lists.apple.com/archives/Usb/2006/Oct/msg00052.html
still lock up your Mac? No way it should have any such effect. -
Right USB Port not reading External HD
I'm using Mid 2014, Retina, 13-inch, Macbook Pro. I noticed that my right USB Port is not reading my 1 TB WD External HD but able to use mouse. How to fix it?
According to the fount of knowledge that is Wikipedia…
https://en.wikipedia.org/wiki/USB
As with previous USB versions, USB 3.0 ports come in low-power and high-power variants, providing 150 mA and 900 mA respectively, while simultaneously transmitting data at SuperSpeed rates.[25] Additionally, there is a Battery Charging Specification (Version 1.2 – December 2010), which increases the power handling capability to 1.5 A but does not allow concurrent data transmission.
It doesn't make sense to me that a 'low power' USB port would output 500ma unless it was working in USB2 mode.
A unit load is defined as 100 mA in USB 1.x and 2.0, and 150 mA in USB 3.0. A device may draw a maximum of five unit loads (500 mA) from a port in USB 1.x and 2.0, or six unit loads (900 mA) in USB 3.0.
You may want to get the genius to confirm the spec for both ports if you go along to a store, I guess they may have limitations.
I would also boot into recovery mode just to see if the disk pops up in Disk Utility via both ports - that could indicate the port is being rendered useless by the OS.
Apologies, you appear to have tried that already. -
Issue report:app store awakening cause the soft keyboard cannot work.
As title said, I just open the app store, and want to search something, so I active the search input area,
then I do something others, so I left it free, then the screen auto close and turn black.
then I just return to use my ipad, awake the screen by press the home button, and unlock the screen.
And I found：
1， the soft key board cannot hidden and the delete key cannot work.
2, I only return the destop by press the home botton and then return the app store, issue continue..
someone please also test it and give a reply on it, thanks!As title said, I just open the app store, and want to search something, so I active the search input area,
then I do something others, so I left it free, then the screen auto close and turn black.
then I just return to use my ipad, awake the screen by press the home button, and unlock the screen.
And I found：
1， the soft key board cannot hidden and the delete key cannot work.
2, I only return the destop by press the home botton and then return the app store, issue continue..
someone please also test it and give a reply on it, thanks!
Maybe you are looking for
-
How do I Remotely Control my Canon EOS-1D Mark II Camera?
Hi, I was wondering if anyone out there knew of a driver or a piece of software that I can download to remotely view and remotely control my Canon EOS-1D Mark II digital camera from my MacBook Pro? The drivers that Canon provides only work on PPC pla
-
Hi, We are running domino application in windows server 2008r2 standard virtual machine, we are facing High RAM utilization issue, but there is no such process are running. Machine is running in ESXI host, most of the time it shows high RAM utilizati
-
JMS Message Download & Replay Utility
Hi, I was wondering if there is a utility to download JMS Messages (with their Message Properties) & Replay them whenever needed. I want to do this to test few applications, want to avoid dependency on other teams to send same mes
-
How do i get my Talk Talk email account loaded onto my IPAD
How do i create a short cut for my Talk Talk email account on my IPAD 2. PS it would help if there was written instructions when you purchase the product.
-
I need recommendations for the location of the master repository for the following scenario. - Three physical servers (DEV,UAT,PROD) - Three work repositories on each server - These servers are source and target at the same time I only want to create