M476nw not printing with pcl5 driver

I have a new MFP M476nw printer that I am trying to set up with the PCL5 driver from the HP website on my Windows 7 32-bit computer. I can not get it to even print a test page - it just hangs up everytime. Is there an issue with this driver?
Thanks

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
Click on New Post.
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

D7360 automatic duplex printing is not available with latest driver

d7360 automatic duplex printing is not available with latest driver
This question was solved.
View Solution.

Hello ephsh,
Welcome to the HP Forums.
I see that you are having an issue attempting to do some duplex printing.
So I can better assist you, please respond with which Operating System you are running:
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
I am going to attach a document that deals with a Two-Sided Print Option Is Not Available Even Though an Automatic Two-Sided Printing Accessory (Duple....
Please feel free to write me back at your convenience.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Can not print with HP LaserJet 6L since the upgrade to Mavericks.

Can not print with HP LaserJet 6L since the upgrade to Mavericks. Any alternative driver for this printer?

I have an HP LaserJet 5P and had the same problem. My LaserJet is connected to a D-Link ethernet print server, then to an Airport Express to support wireless printing.
As recommended in earlier posts, I first downloaded the Gutenprint HP drivers at Sourceforge, version 5.2.9 That did not work. Then found the reference to the Apple kb here: http://support.apple.com/kb/dl907
Downloaded these drivers. When setting up the printer, I got the autoselect option for Generic Postscript Printer and used that. Printer worked, but printed out garbage. I then deleted the printer, and this time selected the HP LaserJet 5P CUPS + Gutenprint v.5.2.9 THAT WORKED! I don't know if was the combination of downloading the drivers from Sourceforge and the Apple kb, or just the Apple kb that solved the problem, but I'm glad this is now sorted.
I was a bit surprised when I hit this snag to begin with because the last upgrade I did from Lion to Mountain Lion, I did not have this issue. It was seamless.

Can not Print with HP LaserJet 5000 and Epson AcuLaser C9100

I am using MacBook Pro 2.3 GHz Intel Core i7 with Mac OS X (10.6.6)
I already install the latest print driver from the Apple Software Update website.
The driver for HP is Ver. 17.5 & for Epson is Ver. 5.2
I connect two of the printer to my Belkin Surf N300 wireless N Router with ethernet cable.
The error when print to HP LaserJet 5000 is as follow:-
Unable to get printer status (Not Implemented)!
Network host 'x.x.x.x' is busy; will retry in 30 seconds...
This error can stay forever if I do not delete the print job
The error when print to Epson AcuLaser C9100 is as follow:-
Printer not responding
This error can stay forever if I do not delete the print job
Previously I can print with my emac with OS X 10.4.10, but now I can not print with 2 of my printer.
My 2 printer are in good condition, so this is not the printer problem.
Please, do anyone know how to fix this problem fast, because I need to use this two printer for my business.
Thanks in advance.

That is not what Greg needs to know. That is just the way that the IP addresses are assigned to the printers.
Your problem is probably that the printers were probably originally found by AppleTalk. AppleTalk is not included in Snow Leopard. If the printers support Bonjour, they should be found that way. Otherwise, you have to use other methods.
How did you add your printers on the new computer? If you delete them from Print & Fax, how would you add them again?

Elements 11 will not print with Epson R2000?

Cannot make Elements 11 work with new Epson r2000 printer. Prompt on screen states it is not compatible or settings are not correct. Epson tech support worked on it, said to contact without success, said to contact Adobe. Printer works fine on all other applications. Help please.

Thanks again.
Richard
Date: Thu, 12 Sep 2013 08:49:39 -0700
From: [email protected]
To: [email protected]
Subject: Elements 11 will not print with Epson R2000?
    Re: Elements 11 will not print with Epson R2000?
    created by A.T. Romano in Premiere Elements - View the full discussion
Ollie37
Thanks for the follow up.
Barbara Brundage in the Photoshop Elements Forum will probably have the answer to your Photoshop Elements Epson scanner issue. Look into that Twain driver. She will give you good input on all this.
Also, see your other thread about Adobe telephone contact information. I have posted in that other thread also.
ATR
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5676121#5676121
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5676121#5676121
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5676121#5676121. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Lightroom 2.5 not printing with main account user but prints with a new use

I have been troubleshooting all day. My new epson r280 is not printing with LR2.5 though it prints in other applications fine. Called epson and we are sure that I have the latest drivers, etc. Called Adobe and they had me create a new user in accounts in system preferences-accounts. When I tried printing from the "test user" LR printed with my epson printer. Adobe said the problem was with my system permissions and I had to reset my system permissions. This doesn't sound right to me. I ran disk utility and repaired my permissions but LR still doesn't print using my original user. Genius Book suggests going to Library-Preferences and to delete the plist. Does this sound right? And do I delete the p-list for LR or for the epson printer? What happens when you delete a p-list? Will I lose my catalog in LR? I would appreciate any help on this problem.

Just trying again to see if anyone has any solutions for this question. Thanks

Why will my epson artisan 810 will not print with ipad?

Why will my epson artisan 810 not print with iPad?

Because it is not a Airprint enabled printer.
http://support.apple.com/kb/ht4356

Officejet Pro 8500A is not printing with Yellow cartridge. Full cartridge and good health ...

I have an OfficeJet Pro 8500 which is not printing with the Yellow cartridge. Printing with the Cyan, Magenta, and Black cartridges is fine. Diagnostics show all cartridges properly installed and having adequate ink supplies.I replaced the Yellow cartridge with a brand new XL cart, but to no avail. I cleaned the orifice with Isopropyl alcohol and a cotton swab, thinking perhaps there was some dried ink or an impurity there. The problem still exists.There are no error messages, either via software or at the printer itself. The printer is out of warranty (imagine that!).I have used HP products for well over 15 years, partly because HP support has been historically excellent. After reading some of the posts on these forums, it seems that HP has allowed their support quality to diminish - significantly. I hope that is not the case in real life.Any ideas out there?

I am having same problem. OfficeJet Pro 8500A Premium. Not printing with Yellow. First replaced Yellow cartridge with new, then spoke with HP Support yesterday and was told that the Black and Yellow Printhead must need to be replaced, at a cost of $49. New Printhead arrived today, inserted and still having same issue with YELLOW! So, for the cost of a new Multi-Pack of print cartridges (which had the Yellow I used to replace the low ink), and the new Printhead, I could have purchased a NEW CANNON PRINTER. I have used HP Products for over 20 years - both professionally (HP Plotters) and at home (always HP Printers, Scanners, Multi-devices, etc. I am VERY frustrated!

No color when printing on pcl5 driver for canon iR 2880i

I have a problem printing from SAP (both sapscript and forms) to Canon iR 2880i using PCL5.
No color is printed, only grayscale and images in forms are also not correctly printed.
I have tried few SAP drivers, delivered by canon and also SAP. (HP color pcl5 drivers)
I did also have the same problem with HP color 3800 printer but there I could solve the problem by using POST2 postscript driver, but the canon printer does not have postscript emulation installed.
I have both tested with access methods C and U but not via sapsprint. Frontend color printing works fine with the printer but I need this for background printing.
So it looks like this is a problem with PCL5 drivers in general.
Can anyone help me with this and give me troubleshooting tips.
Regards
Sindri

Hello Sindri,
We had exactly the same problem with our Canon copiers IRC 2880i. We contacted both Canon and SAP several times without success. No drivers we received from them can print in colors.
What we did to solve our problem:
We installed SAPSPRINT on our print server and configured all printers in SAP with Print method S.
In this case a windows driver is use and we can print in colors on every type of printers.
Please note that if you don't have a print server you can install sapsprint on a simple windows computer and define your Canon 2880i printer on this host.
Best regards,
Olivier Vanderperre

Hp 1315 will not print with 10.6.7

I cannot find any answers to this strange set of circumstances.
I had an old iMac and an hp 1315 all-in-one printer, and everything worked fine. I recently bought a new iMac with OS 10.6.7, and, rather than reinstalling the printer software, I just plugged the old printer into the USB port on the new iMac. The printer worked fine but the device would not scan. I have since learned that 10.6.7 supports printing ONLY on this device. So far so good, but this is where things get strange.
I wanted to scan some pictures, so I got out the old software CD that came with the printer and installed it in my new iMac. The result was that the device was now able to scan. I was happy about this until I discovered that the 1315 now will not print. I have done everything I can think of, including:
-- uninstalling the hp software
-- downloading the most recent driver from the HP website
-- deleting the printer from the Print & Fax window and then adding it again
-- running the "Reset Printing System" on the Print & Fax window
-- running "Software Update"
-- unplugging, replugging, restarting, etc.
-- running the test page on the printer
-- using the device to copy (i.e., using it separate from the computer)
-- checking to see that there are no lights blinking on the device and that it has toner and paper
The Print & Fax window shows me that my 1315 is "Idle" and is the "Last Printer Used," and it has the green light next to it that should indicate that there are no issues with the printer. But when I try and print something, it doesn't print, and the job status is simply "Error."
I am fine with using this device as a printer only, like I did up until yesterday. I have another scanner, and if I had known this would happen I would used it and would never have touched the 1315 or messed with its scanning function.
I must be able to print things for my business. Can anyone help me.

Download and use the updated HP software from their web site, don't use the disk.
You might have to perform some of the steps here, including trying a new user and #18 Resintall Just OS X to kick out the traces
Step by Step to fix your Mac

HP PSC 1410 not printing with Airport Express

I have just purchased this printer. I'm running Tiger on a Powerbook G4.
When I set up the printer with a direct USB connection to my computer, the printer is added with the driver "HP All-in-One 3.0.1" automatically chosen. It works just fine.
When I plug in the printer to my Airport Express, the same All-in-One driver is automatically offered. I chose it, and the printer is added to my list of printers no problem. However, it just won't print. It tries to start the print job, and then the printer icon bounces in the dock with a big red exclamation mark. I try to click on start print job, and the same thing happens - it tries to start the job, but then just stops and the exclamation mark appears.
Does anyone know what might be wrong?
Thanks
Theresa

The PSC 1410 is not on the list of known compatible printers found at http://www.efelix.co.uk/tech/1013.html - which may very well explain the problem.

HP6380 will not print with Windows 7 new install

I have an HP 6380 All-in-one printer. It has never given me any problem when
printing in Vista. We purchased a new laptop for the Wife with Win 7. I
installed the printer on there with no problems.
I then decided to upgrade my laptop to 7 Ultimate. What I did was set my laptop as a dual boot machine and Win7 then became a full install, not upgrade.
When I did network printer discovery, 7 performed a search, found the printer,
and set it up. I did the test page print with success. I could not print
anything past that point and subsequent test pages failed.
I went to the HP web site and found a driver download that was supposed to
include 7 support. The installed printer was removed and I ran the new setup.
Still nothing past the initial test page would print. Further research on the HP
site made reference to a patch and reboot which did not fix the problem. There
was another utility on HP site that removed all installed printer files to allow
a fresh install, no luck.
At this point I decided to compare the printer properties between the Wife's
system and mine. Her system called to a port labeled WSD Port HP38147 (HP
Photosmart 6300 Series).
On mine, the reference was to a TC/IP port with the network address of
192.168.1.102.
I tried to change this to a local port also.
There was NO option for a WSD port, and when I tried to add a port, the only
options were Local or TCP/IP.
For now I am having to save items for printing, then go to my Vista via
dual-boot and print there, a royal PIA.
In Vista BTW the port is labeled Standard TC/IP port HP Photosmart C6300 Series.

Did you delete the printer in Devices and Printers and re-add it?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Text not printing with Black Ink on Canon i560

I've been having a pretty annoying problem with my Canon i560: When printing black text, instead of using the black ink, the printer mixes black from the color inks. This has been a problem for a little while but recently, the colors got a little offset so it became really obvious.
Also, I just received an update for the Canon printer drivers and according to the Apple page, the Canon i560 is supported and the drivers are actually updated.
I'm pretty sure that it's a driver problem because I can print from a Windows virtual machine to the exactly same printer all other variables remaining the same - and guess what: When printing from Windows, black is black, colors are colors, as one would expect with this kind of printer.
So, does anyone have an idea how I can make my make send the right signals to my Canon i560?
Here's the data from my System Report:
Canon i560:
Status:     Idle
Print Server:     Local
Driver Version:     10.57.2.0
Default:     Yes
Shared:     Yes
URI:     usb://Canon/i560?serial=2089RX
PPD:     Canon i560
PPD File Version:     10.57.2.0
PostScript Version:     (3010.000) 705
CUPS Version:     1.5.3 (cups-297.9)
Fax support:     No
Scanning support:     No
Printer Commands:     PrintSelfTestPage ReportLevels
CUPS filters:
Raster2CanonIJ:
Path:     /Library/Printers/Canon/BJPrinter/Filters/Raster2CanonIJ/Raster2CanonIJ.bundle/ Contents/MacOS/Raster2CanonIJ
Permissions:     rwxr-xr-x
Version:     10.57.2
Command2CanonIJ:
Path:     /Library/Printers/Canon/BJPrinter/Filters/Command2CanonIJ.bundle/Contents/MacOS /Command2CanonIJ
Permissions:     rwxr-xr-x
Version:     10.57.2
Printer utility:     /Library/Printers/Canon/BJPrinter/Utilities/BJPrinterUtility2.app
Printer utility version:     7.27.3
PDEs:
CanonIJPDE.bundle:
Sandbox compliant:     Yes

holtsch wrote:
Ah, sorry, I missed that when reading your reply. Probably should have re-read it. However, I have just made a test-print from TextEdit with the "Grayscale Printing" checkbox enabled - and I'm still getting precisely the same ugly, greenish result.
Then it is not working as it should be and it is either the driver or the core printing system. To check both there is alternate driver available called Gutenprint. With this driver suite installed you can create another printer queue on the Mac, this time selecting the Gutenprint i560 driver. When you then print and have the i560 Gutenprint driver selected, change to the Printer Features menu and then select the General tab in Feature Sets submenu and then set the Color Model to Grayscale. Does this work correctly?
And with the Canon driver, if you want to repair the colour offset, you can go to Print & Scan, select the i560 using the Canon driver and then open Options & Supplies. Then select the Utilities tab and click on Open Printer Utility. This will open the Canon IJ Printer Utility. From here you can select the Test Print menu and then Print Head alignment.

Samsung clp 315 not printing with os 10.5.8

i have a samsung clp printer that i bought with my mbp a year and a half ago. after working nearly flawlessly for all this time, suddenly i'm having problems printing. nothing shows up in the print que after i sent it and of course nothing prints. i have re-installed both the drivers and the printer itself many times and i still can't print. i don't have access to printing on my campus because my tech support "doesn't support macs" and my mbp is apparently incompatible with every single printer on campus and the whole system. my printer is conected through my time capsule, which i connect to my mbp via ethernet cable. the wireless stopped working when i upgraded to the 1tb model. previously this configuration worked great. even when i directly connect my printer to my mbp i cannot print. are there any fixes yet??? i would happily roll back to a previous version if the issue is the latest update, however i have no idea how to do this. i purchased a mac because "it just works" and am afraid of messing something up. can anyone help!!?? i have stuff that needs to be printed for school and i'm at a total loss.

I have the same issue. The current Samsung print driver has a bug whereby it will not print a document if the application from which you are printing is different from the application you used last time you printed. The workaround is to restart the printer whenever it does this. I have written to Samsung about this.

LR3 won't print to my printer with postscript driver

System config below. Can print to USB attached Epson R1800 no problem. Can print to network attached HP2840 with the PCL drivers (though it comes out in black and white not colour). Can not print to HP2840 using Postscript drivers through either its USB or network port. Process monitor shows print engine thread consuming 1 CPU for each print job launched. Cancelling the print job in LR3 does NOT kill the print engine thread (!), leaving LR3 consuming 50% of my total CPU resource when I've tried to launch 2 print jobs. This worked fine under LR2.7 and all previous. No changes to printer drivers / config since LR3 upgrade.
Anybody with any suggestions and or experience (good or bad) with other postscript printing would be appreciated.
cheers
Rod
Quad core 3.4GHx, 8GB 1066Mhz RAM, System on SSD. Catalogue on (huge and fast) workstation RAID. nVidia GTX8800. Dual screen

Sigh...
Rebooted several times still same problem.
Installed latest Windows updates and rebooted, printing now works.
...I am sceptical that it was the windows updates, and something about one of the reboots I suspect just cleaned a cache somewhere or allowed a clean LR3 load without some memory glitch.... I suspect I will never know....
computers - dont'cha just love 'em?
cheers
Rod

M476nw not printing with pcl5 driver

Similar Messages

Maybe you are looking for