.m4a files not 'working' on windows server

Hey kids..
I use GoDaddy.com for my webhosting needs... and i recently switched my site from being hosted on a linux server to a windows one...
when i navigate to my .m4a podcasts now the links don't work, and i receive a 404 error. i know the files are there... they're present in the ftp window... and i know i'm not mistyping the file name becuase i host both and mp3 and m4a with the same file name.
also, if i change the m4a to have an mp4 extension, it works just fine. but if i update my RSS file to reflect the new file name, the iTunes subscriber sees duplicate episodes.
what can i do to keep using my m4a files?
PS> Itunes does not function with the m4a also...
1.5Ghz Powerbook 15 Mac OS X (10.3.7)

I just spoke with godaddy and they told me "too bad".
Maybe it's time to find a different server?
The only issue now is that existing subscribers are seeing both the m4a and the mp3 episodes. Is there a way in the RSS podcast feed to force the iTunes subscription to clear its episodes and start over? or to only update the episodes if they aren't already downloaded...
Chris, there are two slightly different things here. What shows up in the iTMS is based on your feed. Once you change your feed, the iTMS will show the changes (you may need to ping the iTMS to force it to update).
For users who already subscribed to your feed, and have already downloaded files, what will happen in their iTunes Podcasting window is that all the old files will remain there, and the changed feed will show all the new files as well - but they will be grayed out with a "Get" button next to them.
So each episode will be duplicated in their list, the one they downloaded and a grayed out one which is the new one. iTunes is smart enough to not force a new download of all the new ones (fortunately).
basically hundreds of people are going to see duplicats in my cast and be saying '*** mang?'
Only the ones who already subscribed will see the duplicate listings, and after a while, they'll get used to it - or can hit "delete". The iTMS listing will not show duplicates (unless, of course, you keep duplicates in your feed).
Hope this answers your question, Chris.

Similar Messages

Web Service Client(Console App) not working on Windows Server 2008 R2 Standard Edition

I am trying to consume an ASMX Web Service in a console app, its working fine in Windows 7,Windows Server 2012 Standard,Windows Server 2008 R2 DataCenter,Windows Server 2008 R2 Enterprise, But its not working in Windows Server 2008 R2 Standard Edition which
is the deployment server.
I tried consuming the ASMX web service using Web Reference and Service Reference as well but its not helping. Its throwing up the following error,
Message:There is an error in XML document (1, 331491).
Inner Exception : System.Xml.XmlException: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 331491.
The scenario is that i call the web service and it returns me an XML i am not able to receive the XML on Windows Server 2008 R2 Standard Edition.
Please provide suggestions on this I need to resolve this ASAP.

Hi,
This question is better asked here:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=asmxandxml
Experts here are more familiar about it and they can give you more efficient suggestion.
Thank you.

Addon not working on Windows Server 2008 OS

Dear Friends,
I have developed an addon in XP and its working fine with XP operating system but it is not working on Windows Server 2008 Standard. Error is "An Attempt was made to load a program with an incorrect format.(Exception from HRESULT: 0x8007000B)".
Regards,
Mahesh.
Edited by: mahesh A on Sep 19, 2009 9:26 AM

Hi,
Since only Windows 2008 SBS is supported with SAP Business One and that Server is available for 64bit Hardware as defined by Microsoft, I guess you should look into that direction.
Regards
Mario

Group Chat feature in Office Communications Server 2007 R2 does not work in Windows Server 2008 R2 domains

   Hello to all, there are two confliting articles about this topic:
   1-
http://technet.microsoft.com/en-us/library/upgrade-domain-controllers-to-windows-server-2008-r2(v=ws.10).aspx#BKMK_Whatsnew : this one says that it does not work "The Group Chat feature in Office Communications Server 2007 R2 does not work in Windows
Server 2008 R2 domains". This article was updated in 2013.
   2-
http://technet.microsoft.com/en-us/library/ee692314(office.13).aspx: this other article says that it will function "Office Communications Server 2007 R2 Group Chat will function in a Windows Server 2008 R2 forest". This article was updated in
2010 and was refered by the first one.
   What is the correct support position for Group Chat feature in Office Communications Server 2007 R2 and Windows Server 2008 R2 domains?
   Regards, EEOC.

Hi,
I notice the following sentence in the link below “Office Communications Server 2007 R2, Group Chat will not function in a Windows Server 2008 R2 forest or when Group Chat member servers are joined to a Windows Server 2008 R2 domain.
We know of an issue with changes in Windows 2008 R2 that requires a Group Chat Client and Group Chat Admin Tools hotfix. The Group Chat Client and Group Chat Admin Tools hotfixes are currently scheduled for mid-April 2010.”
http://blogs.technet.com/b/nexthop/archive/2010/11/06/supportability-for-office-communications-server-2007-r2-and-windows-server-2008-r2.aspx
So in my opinion, if you update to the latest version of Windows Server 2008 R2, OCS Server 2007 R2 and Group Chat Client, Group Chat Admin Tools to the latest version, it should work.
However, the best method for you is make a lab to test the problem firstly.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

MFA not working on Windows Server 2012 R2

Been using MFA since PF days. Deployed it successfully many times but for some reason it's not working with Windows Auth, Terminal Services on a Win 2012 R2 DataCenter box? The machine was successfully added to my domain PhoneFactor group, I
can see and add the machine on the master MFA. Services are running but when I remote in I go right through without MFA stopping me? Any ideas?
TIA

6.3.0 has just been released and 2012 R2 is *still* not supported. What the hell?!?
"Version 6.3.0 of the Azure Multi-Factor Authentication Server adds the
following additional functionality:
* Added one-way SMS functionality for AD FS, RADIUS and User Portal
* Added .csv file import for OATH tokens
* Added support to parse phone numbers in E.164 format during import
From the directory
* Fixed problem preventing slave servers from performing MFA if the
master server was unavailable. This problem was found to exist in
all 6.2.x builds. All customers running 6.2.x should upgrade to 6.3.
* Fixed directory sync issue for recursive security groups
* Added additional logging to AD FS adapter
* Other minor bug fixes and security improvements
Known Issues:
* Windows Authentication for Terminal Services is still not supported for
Windows Server 2012 R2"
So they added a whole stack of other functionality, but still didn't get around to taking a look at this bug. I'm stunned. Is there any sort of timeline on fixing this, or is 2012 R2 just going to remain unsupported forever?

LocalLAT.txt file not working in Windows 7

hi,
i want to exclude few ip addresses from tmg client installed on a host and want it to be routed through another gateway placed on a router. I used to do this via locallat.txt file placed in all users directory with windows xp. but it is not working with
windows 7.
i have placed the file in: %ProgramData%\Microsoft\Firewall Client 2004
thanks

Hi,
As the issue is specific with Forefront TMG , you may contact Microsoft Forefront TMG Forum for further assistance on the issue:
Contact - Forefront TMG support:
https://social.technet.microsoft.com/Forums/forefront/en-us/home?category=forefront
Please revert for any clarification on this or any Windows issue. We will be glad to help you.
Roger Lu
TechNet Community Support

Email Notification Script is Not Working in Windows Server 2012..

Dears
I have Server 2012 and I wants to make new task seclude for email notification, while any user is login to the
server the server will send notification email about user name and IP address for the user, I have script it is working fine in windows 2008 and it is xml file, but the script is not working in 2012 because in task schedule in windows 2008 there is an option
called send email but in windows 2012 this option is deprecated, I’m using start program to run the script in PowerShell instead of send email and I configured as an
end-MailMessage
-From [email protected]
-Subject "Email Notification"
-To [email protected]
-SmtpServer mail.domainName.com
But when I use this PowerShell I only receive email notification without any name and IP address, kindly I need
your support and help, I’m using below script.
<?xml version="1.0" encoding="UTF-16"?>
< Task version="1.2" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
<RegistrationInfo>
<Date>2013-11-27T11:16:32.3962177</Date>
<Author>Company Name\User Name</Author>
<Description>RDP Login V1</Description>
</RegistrationInfo>
<Triggers>
<EventTrigger>
<Enabled>true</Enabled>
<Subscription><QueryList><Query Id="0" Path="Security"><Select Path="Security">*[System[(EventID=4624)]] and *[EventData[Data[@Name='LogonType'] and (Data=10)]]</Select></Query></QueryList></Subscription>
<ValueQueries>
<Value name="IpAddress">Event/EventData/Data[@Name="IpAddress"]</Value>
<Value name="TargetUserName">Event/EventData/Data[@Name="TargetUserName"]</Value>
</ValueQueries>
</EventTrigger>
</Triggers>
<Principals>
<Principal id="Author">
<UserId>Company Name\User Name</UserId>
<LogonType>Password</LogonType>
<RunLevel>HighestAvailable</RunLevel>
</Principal>
</Principals>
<Settings>
<MultipleInstancesPolicy>IgnoreNew</MultipleInstancesPolicy>
<DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries>
<StopIfGoingOnBatteries>true</StopIfGoingOnBatteries>
<AllowHardTerminate>true</AllowHardTerminate>
<StartWhenAvailable>false</StartWhenAvailable>
<RunOnlyIfNetworkAvailable>false</RunOnlyIfNetworkAvailable>
<IdleSettings>
<StopOnIdleEnd>true</StopOnIdleEnd>
<RestartOnIdle>false</RestartOnIdle>
</IdleSettings>
<AllowStartOnDemand>true</AllowStartOnDemand>
<Enabled>true</Enabled>
<Hidden>false</Hidden>
<RunOnlyIfIdle>false</RunOnlyIfIdle>
<WakeToRun>false</WakeToRun>
<ExecutionTimeLimit>P3D</ExecutionTimeLimit>
<Priority>7</Priority>
</Settings>
<Actions Context="Author">
<SendEmail>
<Server>Name of the Server.com</Server>
<Subject>RDP Login V1</Subject>
<To>Sender Name</To>
<From>Any Email.com</From>
<Body>Login Alert on ServerName IP : $(IpAddress) User: $(TargetUserName). Please take necessary action</Body>
<HeaderFields />
</SendEmail>
</Actions>
< /Task>

Dears
I have Server 2012 and I wants to make new task seclude for email notification, while any user is login to the
server the server will send notification email about user name and IP address for the user, I have script it is working fine in windows 2008 and it is xml file, but the script is not working in 2012 because in task schedule in windows 2008 there is an option
called send email but in windows 2012 this option is deprecated, I’m using start program to run the script in PowerShell instead of send email and I configured as an
end-MailMessage
-From [email protected]
-Subject "Email Notification"
-To [email protected]
-SmtpServer mail.domainName.com
But when I use this PowerShell I only receive email notification without any name and IP address, kindly I need
your support and help, I’m using below script.
<?xml version="1.0" encoding="UTF-16"?>
< Task version="1.2" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
<RegistrationInfo>
<Date>2013-11-27T11:16:32.3962177</Date>
<Author>Company Name\User Name</Author>
<Description>RDP Login V1</Description>
</RegistrationInfo>
<Triggers>
<EventTrigger>
<Enabled>true</Enabled>
<Subscription><QueryList><Query Id="0" Path="Security"><Select Path="Security">*[System[(EventID=4624)]] and *[EventData[Data[@Name='LogonType'] and (Data=10)]]</Select></Query></QueryList></Subscription>
<ValueQueries>
<Value name="IpAddress">Event/EventData/Data[@Name="IpAddress"]</Value>
<Value name="TargetUserName">Event/EventData/Data[@Name="TargetUserName"]</Value>
</ValueQueries>
</EventTrigger>
</Triggers>
<Principals>
<Principal id="Author">
<UserId>Company Name\User Name</UserId>
<LogonType>Password</LogonType>
<RunLevel>HighestAvailable</RunLevel>
</Principal>
</Principals>
<Settings>
<MultipleInstancesPolicy>IgnoreNew</MultipleInstancesPolicy>
<DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries>
<StopIfGoingOnBatteries>true</StopIfGoingOnBatteries>
<AllowHardTerminate>true</AllowHardTerminate>
<StartWhenAvailable>false</StartWhenAvailable>
<RunOnlyIfNetworkAvailable>false</RunOnlyIfNetworkAvailable>
<IdleSettings>
<StopOnIdleEnd>true</StopOnIdleEnd>
<RestartOnIdle>false</RestartOnIdle>
</IdleSettings>
<AllowStartOnDemand>true</AllowStartOnDemand>
<Enabled>true</Enabled>
<Hidden>false</Hidden>
<RunOnlyIfIdle>false</RunOnlyIfIdle>
<WakeToRun>false</WakeToRun>
<ExecutionTimeLimit>P3D</ExecutionTimeLimit>
<Priority>7</Priority>
</Settings>
<Actions Context="Author">
<SendEmail>
<Server>Name of the Server.com</Server>
<Subject>RDP Login V1</Subject>
<To>Sender Name</To>
<From>Any Email.com</From>
<Body>Login Alert on ServerName IP : $(IpAddress) User: $(TargetUserName). Please take necessary action</Body>
<HeaderFields />
</SendEmail>
</Actions>
< /Task>

Remote video streaming not working with Windows Server Essentials Media Pack

I installed Server Essentials Media Pack and the video streaming via remote access does not seem to be working. I see all the video files on the server's remotewebaccess page in "Media Library" group. When I try to play the video in Chrome
the player appears for a brief moment, but then the browser starts downloading the entire file. With Internet Explorer the empty browser window opens and the download starts. I am trying it while outside of my local network. The video streaming used to work
with Server 2012 Esesentials. Am I missing some additional codecs or remote streaming is no longer supported?

Hi,
What’s the default player for these media files on your computer? The issue may be caused by the default player could not load the media file correctly. Please make sure Windows Media Player
with full codec installed is the default one. And then check if the media streaming feature could work as normal. Here is an article about how to configure the media streaming feature, hope it helps.
Manage Digital Media in Windows Server 2012 Essentials
http://technet.microsoft.com/en-us/library/jj628151.aspx
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

Full Text Search in PDF file Not Working in SQL Server 2012

OS: Windows Server 2012 @ Azure
DB: SQL Server 2012 SP 1 with Cum Update 6
Filter: OfficeFilter installed, PDFFilter64 11 installed (actually I tried 9 too)
I have done the following steps:-
1. Configure SQL Server Instance to enable FILESTREAM for Transaction-SQL Access (IO Access and Allow Remote Client Access to FileStream data) and restart the instance service.
2. Set Stream Access Level to Full Access and
3. Create Database with file stream folder and set the created database Properties.Options: FileStreamDirectorName = fileContainer and FileStream Non-Transaction Access = Full.
4. Create a FileTable with file director
5. Execute the following scripts to ensure all installed components working. PDF is listed as one of the supported filter.
EXEC sp_fulltext_service @action='load_os_resources', @value=1;
EXEC sp_fulltext_service 'verify_signature', 0 -- don't verify signatures
EXEC sp_fulltext_service 'update_languages'; -- update language list
EXEC sp_fulltext_service 'restart_all_fdhosts';
EXEC sp_help_fulltext_system_components 'filter'
reconfigure with override
6. Copy a few PPTX, DOCX, PDF file into the file director.
7. Search the data by following command. I can PPTX and DOCX files can return right result but PDF is not returned although it contains the searching contents.
SELECT *
FROM dbo.Course
WHERE CONTAINS(file_stream, 'Counsellor');
Any expert advise?
Ant in SG

Are you seeing any errors in the SQL Server Error Log, the Windows Application or System logs? How about in the Full-text crawl logging?
Troubleshooting Errors in a Full-Text Population (Crawl)
If your server has a mix of multi-threaded iFilters and single-threaded iFilters, this can cause serious problems with building the full text index. (How do I know this? Well, let's just say that I have suffered as well. And I was shocked!)
The efficiency was greatly increased by this article:
Troubleshooting: Slow Full-Text Indexing Performance Due to Filtering Process
This means changing the threading model for the multi-threaded (e.g. Microsoft Office) filters to be Apartment Threaded. Or perhaps if you are full text indexing PDF files, abandoning the free single-threaded Adobe IFilter and purchasing the FoxIt
(or some other) multi-threaded PDF iFilter would benefit you.
RLF

BMR/Systemstate backup not working on windows server 2008 error 2147942487

Hi, trying to backup system image using SCDPM 2010 RTM.Most of the server are getting healthy backups except for this one server which is giving error:
Affected area: Computer\System Protection
Occurred since: 1/27/2014 2:43:27 PM
Description: The replica of System Protection Computer\System Protection on server.DOMAIN.COM is inconsistent with the protected data source. All protection activities for data source will fail until the replica is synchronized with consistency check. You can recover data from existing recovery points, but new recovery points cannot be created until the replica is consistent.
For SharePoint farm, recovery points will continue getting created with the databases that are consistent. To backup inconsistent databases, run a consistency check on the farm. (ID 3106)
DPM cannot create a backup because Windows Server Backup (WSB) on the protected computer encountered an error (WSB Event ID: 517, WSB Error Code: 0x80070057). (ID 30229 Details: Internal error code: 0x809909FB)
More information
Recommended action: For resolution actions and more information on the WSB error, go to http://technet.microsoft.com/en-us/library/cc734488(WS.10).aspx.
Synchronize with consistency check.
Run a synchronization job with consistency check...
Resolution: To dismiss the alert, click below
Inactivate alert
On the server, event viewer show the following events:
1. Backup Log:
Backup started at '2014-01-27T11:26:21.356950100Z' failed with following error code '2147942487'.
2. Application Log:
The description for Event ID 517 from source Microsoft-Windows-Backup cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
27-Jan-14 11:26:21 AM
2147942487
%%2147942487
The resource loader failed to find MUI file
However, when I observe the backup process using "wbadmin get status", it reaches 99% then stops.
Running backup of volume Local Disk(C:), copied (97%).
Running backup of volume Local Disk(C:), copied (98%).
Running backup of volume Local Disk(C:), copied (99%).
Backup stopped before completing.
Summary of backup:
Backup stopped before completing.
The parameter is incorrect.
The server hardware is HP blade with two disk which are mirrored, and has 12 GB free space. below is the output from systeminfo command:
Host Name: server
OS Name: Microsoftr Windows Serverr 2008 Enterprise
OS Version: 6.0.6002 Service Pack 2 Build 6002
OS Manufacturer: Microsoft Corporation
OS Configuration: Member Server
OS Build Type: Multiprocessor Free
Registered Owner: Admin
Registered Organization: -
Product ID: 55041-339-7818202-76771
Original Install Date: 04-Aug-08, 3:15:18 PM
System Boot Time: 21-Jan-14, 3:58:47 PM
System Manufacturer: HP
System Model: ProLiant BL460c G1
System Type: x64-based PC
Processor(s): 2 Processor(s) Installed.
[01]: Intel64 Family 6 Model 23 Stepping 6 GenuineIntel ~3000 Mhz
[02]: Intel64 Family 6 Model 23 Stepping 6 GenuineIntel ~3000 Mhz
BIOS Version: HP I15, 02-May-11
Windows Directory: C:\Windows
System Directory: C:\Windows\system32
Boot Device: \Device\HarddiskVolume1
System Locale: en-us;English (United States)
Input Locale: en-us;English (United States)
Time Zone: (GMT+03:00) Kuwait, Riyadh
Total Physical Memory: 16,381 MB
Available Physical Memory: 8,320 MB
Virtual Memory: Max Size: 21,821 MB
Virtual Memory: Available: 13,722 MB
Virtual Memory: In Use: 8,099 MB
Page File Location(s): C:\pagefile.sys
Domain: DOMAIN.COM
Logon Server: N/A
Hotfix(s): 157 Hotfix(s) Installed.
[01]: {47740627-D81D-4A45-A215-03B075A18EC7}
[02]: {3D019598-7B59-447A-80AE-815B703B84FF}
[03]: {A8E86480-A9C1-4414-8AA2-B05A485C82F0}
[04]: {C444285D-5E4F-48A4-91DD-47AAAA68E92D}
[05]: {DB33A524-845E-4855-9E90-A5619BCDD527}
[06]: {ECC3A660-90E3-4A89-9FE8-F8B3C633B12E}
[07]: {65AFCB03-3111-47E2-B1ED-198D6B0BC96E}
[08]: {F5E29D9D-519A-36C7-87E3-9A22A8180B1B}
[09]: KB971513
[10]: KB971512
[11]: 944036
[12]: 982861
[13]: KB960362
[14]: KB2079403
[15]: KB2117917
[16]: KB2141007
[17]: KB2160329
[18]: KB2183461
[19]: KB2207566
[20]: KB2286198
[21]: KB2296011
[22]: KB2296199
[23]: KB2305420
[24]: KB2345886
[25]: KB2347290
[26]: KB2387149
[27]: KB2388210
[28]: KB2416400
[29]: KB2416470
[30]: KB2419640
[31]: KB2423089
[32]: KB2436673
[33]: KB2442962
[34]: KB2443685
[35]: KB2447568
[36]: KB2467659
[37]: KB938464
[38]: KB942288
[39]: KB948609
[40]: KB948610
[41]: KB949189
[42]: KB950762
[43]: KB950974
[44]: KB951066
[45]: KB951698
[46]: KB951978
[47]: KB952004
[48]: KB952287
[49]: KB953733
[50]: KB954155
[51]: KB954459
[52]: KB955020
[53]: KB955069
[54]: KB955302
[55]: KB955430
[56]: KB955839
[57]: KB956250
[58]: KB956572
[59]: KB956744
[60]: KB956802
[61]: KB957097
[62]: KB957200
[63]: KB957321
[64]: KB957388
[65]: KB958481
[66]: KB958483
[67]: KB958623
[68]: KB958624
[69]: KB958644
[70]: KB958687
[71]: KB959130
[72]: KB959426
[73]: KB960225
[74]: KB960803
[75]: KB961371
[76]: KB961501
[77]: KB967190
[78]: KB967723
[79]: KB968389
[80]: KB968537
[81]: KB969058
[82]: KB969897
[83]: KB969897
[84]: KB969947
[85]: KB970238
[86]: KB970430
[87]: KB970653
[88]: KB971468
[89]: KB971486
[90]: KB971557
[91]: KB971657
[92]: KB971737
[93]: KB971930
[94]: KB971961
[95]: KB972036
[96]: KB972270
[97]: KB972636
[98]: KB973346
[99]: KB973507
[100]: KB973525
[101]: KB973565
[102]: KB973687
[103]: KB973917
[104]: KB974145
[105]: KB974318
[106]: KB974455
[107]: KB974470
[108]: KB974571
[109]: KB975364
[110]: KB975467
[111]: KB975517
[112]: KB975560
[113]: KB975759
[114]: KB975929
[115]: KB976098
[116]: KB976264
[117]: KB976470
[118]: KB976662
[119]: KB976749
[120]: KB976768
[121]: KB976772
[122]: KB977165
[123]: KB978251
[124]: KB978262
[125]: KB978542
[126]: KB978601
[127]: KB978886
[128]: KB979099
[129]: KB979306
[130]: KB979309
[131]: KB979482
[132]: KB979687
[133]: KB979688
[134]: KB979899
[135]: KB979910
[136]: KB980182
[137]: KB980195
[138]: KB980218
[139]: KB980232
[140]: KB980248
[141]: KB980302
[142]: KB980436
[143]: KB980842
[144]: KB981322
[145]: KB981332
[146]: KB981793
[147]: KB981852
[148]: KB982132
[149]: KB982214
[150]: KB982519
[151]: KB982664
[152]: KB982666
[153]: KB982799
[154]: KB983589
[155]: KB948465
[156]: KB960568
[157]: KB968930
Network Card(s): 1 NIC(s) Installed.
[01]: HP NC373i Multifunction Gigabit Server Adapter
Connection Name: Local Area Connection 2
DHCP Enabled: No
IP address(es)
[01]: x.x.x.x
[02]: fe80::f494:43c2:7d90:e774
Hyper-V Requirements: VM Monitor Mode Extensions: No
Virtualization Enabled In Firmware: No
Second Level Address Translation: No
Data Execution Prevention Available: No
Things I have tried:
1. I tried to backup manually to external HDD using wsb snap-in, but it has failed in the same way.
2. Stop and re-add protection.
3. I have researched the error, some results suggest that some bad sectors might exist, however, when I run the command, it forces me to schedule the command on next boot. when I reboot, it loads windows after that gives a message "Cannot open the volume
for direct access"
How to end this loop? please help. Thanks for considering my question ...

Hello Ebttikar,
Please try clean boot then test how the issue goes. Following are the detailed steps about clean boot:
Log on to the computer by using an account that has administrator rights.
Click Start, type msconfig.exe in the Start Search box, and then press ENTER to start the System Configuration Utility.
On the General tab, click Selective Startup, and then click to clear the Load startup items check box. (The Use Original Boot.ini check box is unavailable.)
On the Services tab, click to select the Hide all Microsoft services check box, and then click Disable all.
Click OK, Choose Don’t show this message again and then click Restart.
Please check if RDP session issue is still the same.
Please let me know the result.
Best regards,
Sophia Sun
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

SCORM (flash Player Content) not working on Windows Server 2012 R2 which has IE11 integrated installed on it.

Hi Everyone,
I have website which contains SCORM package, installed on Windows Server 2012 R2 which has IE11 installed on it.
Flash Player is also embedded with IE.
IE Version: 11.0.9600.17278.
Updated Version: 11.0.12 (KB2977629)
When I launch SCORM (flash Player Content) from my application, it is not working. It just displays a blank page however the Title of IE is set to the text from the SCORM content.
However if I access the same URL from any other machine which has previous version of Windows OS (i.e. previous to Windows 8 OS), it is working as expected on IE9, IE10 and IE11.
While trying to find out the cause, I came across some forum which says we have to install the “Desktop Experience” on the server to enable the inbuilt flash player. After doing that also, My SCORM contents are not getting displayed.
To find out more details, I have uploaded the SCORM Package on SCORM Cloud to check if it is working there. Here again the same problem, it doesn’t work and displays
error message saying that “Member is not found” and when I tried to find out the location of the error then it is coming at
Windows.document.myFlash.setVariable(…) method on the Windows Server 2012 R2 with IE11.
When I performed “Addwatch”, it is saying that Windows.document.myFlash doesn’t have setVariable(…) method.
However if access the same cloud URL from other machine (Having OS previous to Windows 8 OS), it is working as expected.
I have attached the screenshot of the error.
Any help would be appreciated.
Thanks

Hello,
I'd ask the SCORM package provider or in Microsoft's ASP.Net forums:
http://forums.asp.net/
As Microsoft's ASP.Net forums are on a different platform, we cannot move the question for you.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Internet Connection not working on Windows Server when static address is set for IPV4

Hi,
We are using Windows server and we have set the static IP address for the machine and when we are trying to access internet, it is not happening.
In case if I change IPV4 property to "Obtain IP address Automatically", the IP is getting changed but we are able to access the internet.
So I want the static IP address to remain as is and also the internet to work.
Thanks in advance.
Vishwas.

It might something wrong with the IP addressing you used when you statically set the configuration or traffic from the IP address you used is denied.
As you already have an IP config that works (Run ipconfig /all to get it) then you can simply proceed using one of these ways:
On your DHCP level, do a reservation of the IP address so that it will always be allocated to your server
or on your DHCP level, exclude the IP address of the server and set it manually on the server
More information if you contact your Network Engineer for assistance.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Instant Client not working on Windows Server 2003

Hi everybody,
I have installed the Instant Client libraries on a machine running Windows Server 2003 in order to connect to a remote Oracle server. I also installed the sqlplus package. I copied them in a local directory, updated the Environment variable PATH and restarted. When I try to execute sqlplus to test if everything works fine, I get the following errors:
sqlplus user/[email protected]:1521/orcl
SP2-1503: Unable to initialize Oracle call interface
SP2-0152: ORACLE may not be functioning properly
Also, when I try to use PHP OCI8 functions like oci_connect() I get an error like:
PHP Warning: oci_connect() [function.oci-connect]: OCIEnvNlsCreate() failed. There is something wrong with your system - please check that PATH includes the directory with Oracle Instant Client libraries
I checked it and the PATH variable points to the instant client libraries.
Any ideas?
Thanks in advance!

I get the following errors: sqlplus user/[email protected]:1521/orcl SP2-1503: Unable to initialize Oracle call interface SP2-0152: ORACLE may not be functioning properly Also, when I try to use PHP OCI8 functions like oci_connect......Like the error suggested, the instant client libraries does not include the Network Service required by SQLPLUS.
The connect string you are trying to use doesn't work for SQLPLUS. SQLPLUS will need proper TNS names configured.
In another words, instanct client libraries installation is not enough to use sqlplus. Use Runtime installation or Customized installation.

Problem Windows 8 logon script not working from windows server 2008 R2

hi there , this is third post regard this problem, here is my problem goes .....
Is a very simple logon script for mapping drive purpose .... PLS take note Domain users can access and run this script for domain users using windows XP / WINDOWS VISTA / WINDOSWS 7 and only users " WINDOWS 8.1 " Does NOT run
at all . the script I put on logon script in Windows server 2008R2 group policy ...
@jrv :- http://social.technet.microsoft.com/profile/jrv/?ws=usercard-mini , insist said is my group policy setup problem so I post here agn...
Manually run the script on WINDOWS 8.1 is 100 % perfect so it is definitely not my logon script issue , PLS any guidance pls share for me ok ?? thanks
Below is my script syntax ;-
@echo off
REM Login.bat Version 1.0
REM Exit if user has logged on to the Server
IF %COMPUTERNAME%.==SL2011. GOTO END
REM Delete pre-existing drive mappings
REM
REM Map M: to SL2011 on sl2011
NET USE M: /DELETE >nul
NET USE M: \\SL2011\sl2011 /YES >nul
REM
REM Map Y: to AccScan on rss2
NET USE Y: /DELETE >nul
NET USE Y: \\rss2\Public\AccScan /YES >nul
REM

Hi Tee Ee Foong,
According to your post, the gpresult showed the GPO was applied and the script could run successfullymanully in the client. Right? Please follow the following step to narrow down
the issue:
1. Change the script to the following command: add
> %SystemDrive%\Users\test.txt to the script.
2. Log on to a client with a regular user account, run gpupdate/force, and then re-log on to this client.
3. Check if the test.txtfile exists in this location %SystemDrive%\Users.
If the test.txtfile exists, the GPO with logon script is applied successfully when user logs on. But the result of running logon script achieves the goal we excepted or not which
is still not sure.
Regards,
Lany Zhang

CanWrite() method of File not working in windows XP

Hi friends,
I am checking permissions of directory and file using File API. In windows 2000 professional, my java program works file showing canWrite() result correctly whereas in Windows XP, even when i set permission to a folder read, canWrite() method showing true ? what would be the error ? can anyone help me out ?
Here is my snippet ?
File file = new File ("c:\testing"); // where my testing folder is set to readonly
System.out.println(file.canWrite()); // returns true instead of false
Regards,
V.Prasanna

You're code isn't working on win2k either because it's bugged.
File file = new File ("c:\testing");should be
File file = new File ("c:\\testing");

.m4a files not 'working' on windows server

Similar Messages

Maybe you are looking for