M4E Error Codes with SBS/Exchange...
Hi,
Does anyone have a list of the error codes for Mail for Exchange?
I have a Nokia E61 and I am trying to link it to our SBS Server. The SBS server supports RPC/HTTP, so I know all the domain certs/settings/passwords are good.
The E61 also access the Internet via WiFi, so I know this works too.
However, after installing and checking everything I can - I see this in the error log, two error codes I dont seem to be able to find answers to anywhere!
All help most welcome!
08/05/2007 7:28:46 OffPeakTime active
08/05/2007 7:28:50 Mail For Exchange Error -30180
08/05/2007 7:37:47 Profile Updated
08/05/2007 7:37:49 OffPeakTime active
08/05/2007 7:37:50 Profile Updated
08/05/2007 7:37:51 OffPeakTime active
08/05/2007 7:37:54 Mail For Exchange Error -30207
08/05/2007 7:38:15 Setting ROAMING status to True
08/05/2007 7:38:24 Mail For Exchange Error -30207
08/05/2007 7:38:50 Profile Updated
08/05/2007 7:38:52 OffPeakTime active
08/05/2007 7:38:53 Profile Updated
08/05/2007 7:38:54 OffPeakTime active
08/05/2007 7:38:55 Cancel job:3,type1:
08/05/2007 7:38:58 Mail For Exchange Error -30207
08/05/2007 7:40:35 Profile Updated
08/05/2007 7:40:36 OffPeakTime active
08/05/2007 7:40:39 Mail For Exchange Error -30207
08/05/2007 7:41:06 Mail For Exchange Error -30207
08/05/2007 7:57:53 OffPeakTime active
08/05/2007 8:09:44 Setting OFFLINE Status to True
08/05/2007 8:40:39 Mail For Exchange Error -30180
Help, I need somebody Help, not just anybody Help, you know, I need someone Help
When I was younger (less IT smart,but arrogant), so much younger than today I never needed anybody's help in any way But now these days are gone, I'm not so self assured Now I find, I've changed my mind, I've opened up the doors (i really am stuck!)
Help me if you can, I'm feeling down And I do appreciate you being 'round Help me get my feet back on the ground Won't you, please, please help me? (this M4E error is killing me!)
Similar Messages
-
Error Code 8224 Ldifde Exchange 2010 installation failure
Hi, here is a problem I have been bashing my head with for about a week. I am transitioning to Exchange 2010 from 2003. I have two DC's running Windows Server 2003 Sp2, one of which is the Exchange 2003 server. I have just brought online a windows 2008R2
member server, which I am attempting to install exchange 2010 on. I get the following error message during installation.
Organization Preparation
Failed
Error:
The following error was generated when "$error.Clear(); install-ExchangeSchema -LdapFileName ($roleInstallPath + "Setup\Data\"+$RoleSchemaPrefix + "schema1.ldf")" was run: "There was an error while running 'ldifde.exe' to
import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\PostExchange2003_schema1.ldf'. The error code is: 8224. More details can be found in the error file: 'C:\Users\administrator.CFN\AppData\Local\Temp\2\ldif.err'".
There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\PostExchange2003_schema1.ldf'. The error code is: 8224. More details can be found in the error file: 'C:\Users\administrator.CFN\AppData\Local\Temp\2\ldif.err'
Elapsed Time: 00:00:22
And from the ldif.err:
The connection cannot be established
The error code is 8224
Now I have checked dns, all is good. I can resolve the DC without issue.
I have done dcdiag and netdiag and passes all tests. I have even written a hosts file, all this to no avail.
Any help would be appreciated.
Thanks
BI had a same and I fixed this........
Solution
1. The error is happening at the "Organization Preparation" stage, so let's go 'old school' and do that manually.
2. Locate the server on your network that is the schema master (Locate FSMO Servers).
3. Put the Exchange 2010 DVD in the schema master (Or share it over the network and connect to it from the schema master server).
4. Drop to command line and change to the DVD Drive/Directory with the Exchange 2010 setup files in it.
5. ONLY do this if you have Exchange 2003 already! Run the following command, (If no Exchange 2003 present, skip to the next step).
X:\Setup /PrepareLegacyExchangePermissions (Where "X" is CD ROM derive letter)
6. Run the following command:
X:\Setup /PrepareSchema
7.
Run the following command:
X:\Setup /PrepareAD
Note: At this point it may fail, and say it requires an organization name, (it will do this if it finds no existing container in Active Directory).
Error
Exchange organization name is required for this mode. To specify an organization name, use the /organizationName parameter.
If that is the case, then run the following command:
X:\Setup /PrepareAD /OrganizationName:"Your required org name"
Reboot your server and try to install exchange 2010.
Jotiba Patil -
Solved!
Go to Solution.Error codes display to help diagnose issues detected by the camcorder. Below is a list of common error code numbers, followed by their causes and the necessary steps to resolve the issue.
IMPORTANT: If model-specific information is required to complete any of the steps in this solution, refer to the operating instructions supplied with the product. Manuals are available online in the Manuals/Specs/Warranty section of the Sony® eSupport Web site.
NOTE: The xx in the error codes below represent any random numerical digits and does not affect the overall diagnosis of the issue.
Error Code
Cause
Resolution
C:13:xx
The recording media you are using is either not supported for use with the camcorder or the media has a problem.
Ensure the recording media you are using is supported for use with the camcorder or try using different recording media.
NOTE: If you have a DVD camcorder and are using a recordable DVD, the disc may be dirty or have scratches; try cleaning the disc with a soft cleaning cloth.
C:21:xx
Moisture condensation has occurred.
Remove the recording media from the camera.
Leave the media compartment open for at least one hour.
Insert different recording media into the camcorder.
Power on the camcorder.
C:22:xx
The video heads are dirty.
Clean the video heads using a dry head-cleaning cassette.
C:04:xx
C:23:xx
The battery being used is not an InfoLithium® battery.
Replace the battery in the camcorder with a Sony® InfoLithium battery or connect the supplied AC power adapter.
C:31:xx
C:32:xx
The camcorder has detected an issue that may require a power reset.
Turn off the camcorder.
Remove the battery or disconnect the AC power adapter for 60 seconds.
Insert the battery or reconnect the AC adapter.
E:20:xx
E:40:xx
E:60:xx
E:61:xx
E:62:xx
E:91:xx
E:94:xx
The camcorder has detected an issue that may require service.
Reset the camcorder to factory specifications to try resolving this issue.
The troubleshooting steps listed above should resolve your issue. If you have completed all of the steps and the issue is not resolved, service may be required. The Sony® eService Web site at https://eservice.sony.com/ can assist you in obtaining service from a Sony Service Center or locating a Sony Authorized Servicer. -
Error Code with Livecycle forms, when opened online - how do I fix this?
Could you please tell me how to fix issue where when I make my forms available online, they open up with an error code? I provide a link to a file, and when the user opens the file, it says there was an error - about a paragraph of text. If they save the file, and then open again in Adobe Reader, it works fine. But most of the time they think the file is corrupt, and don't want to download and save it to their computer. Below is a screenshot of the problem, and it only happens when I open the file online. And, I have already upgraded to the most recent version of Adobe, so why does this happen?
Oh, I found a great instruction page at Configure browser to use the Adobe PDF plug-in That worked! Thank you!
-
Hi
I am in the process of resetting ipod touch 32gb. I was told to update our version itunes to itunes 10. It is now on our computer. I then had to restore my ipod. It downloaded overnight. when i try to set up my ipod there is a picture on the ipod touch which implies connect to itunes ( cable to itunes icon on display) Ive done that then when I open itunes and click on the device after a short time an error code -9808 appears and says we could not complete your itunes store request and try again later. When I turn on the ipod it only shows the connect to itunes display
any ideas plsI'm having the same problem as well. I can't see to get any support from Apple on the phone. I've been on hold for 20 minutes.
-
Error code with download of application manager
Error code A12E1
What does this mean?
I can't complete downloading the adobe application manager because the message suggests I contact customer support.
How can I fix this please?
BiancaTry the direct download links for AAM found in this article
http://helpx.adobe.com/creative-cloud/kb/download-error-403-launching-aam.html -
Hi, I just want to know how to empty my trash because I keep getting this message saying " The operation can't be completed
because an unexpected error occured (error code-8003) I tried looking this up and couldn't find any refference regarding it.
Please helpPlease look to the right of the screen where it says "More Like this" you may find the resolution there.
-
Error Code: AIP: 50080: Exchange protocol identification error
Hi,
I have setup a business action to process EDI X12 850 (PO) document version 4010 over EDI X12 over Internet - HTTP. To simulate the Trading Partner sending the EDI data to us I have developed a test.html page to submit the EDI data. The test.html does a http post to the b2b/transportServlet. When I do this I get the following error:
AIP: 50080 Exchange protocol identification errorMy Business Action
setup look like this:
BUSINESS ACTION:
Create Business Action : Review for 850
Business Protocol : EDI X12 over Internet
Process Protocol : B2B
Process Protocol Revision : B2B Process - 1.0
General
Name :Process_850
Revision :1.0
Document Protocol Revision
Name :X12_4010
Revision :4010
Document Type
Document Type :850
Document Definition :850_Def
Create Business Action : Review
Business Protocol :EDI X12 over Internet
Process Protocol :B2B
Process Protocol Revision :B2B Process - 1.0
General
Name :Process_997
Revision :1.0
Document Protocol Revision
Name :X12_4010
Revision :4010
Document Type
Document Type :997
Document Definition :997_Def
Create Trading Partner : Review
General
Name :ACME
Operational Capability
Business Protocol :EDI X12 over Internet
Business Action :Process_850
Use Default Document Protocol Parameters :false
Use Default Document Definition :true
Communication Capability
Delivery Channel :ACME_X12_DC
Document Exchange :ACME_X12_DocEx
Exchange Protocol Revision :AS2 - 1.1
Transport :ACME_X12_Transport
Transport Protocol :HTTP
Transport Server :ACME_X12_Transport_Server
Trading Partner :ACME
Business Protocol :EDI X12 over Internet
Details
Business Action :Process_997 - Responder
Is Initiator :false
Functional acknowledgement required? :false
Is acknowledgement handled by Integration B2B? :true
Document Information
Document Protocol :EDI_X12
Document Protocol Revision :X12_4010
Document Type :997
Document Definition
Document Protocol Parameters
Name Value
Interchange Time #SystemTime(HHMM)#
Interchange ecs File
Security Information Qualifier 00
Security Information
Authorization Information
[ Application Receiver's Code ] ACME
Interchange Control Standard/Repetition Separator U
Segment Delimiter 0x27
Interchange Date #SystemDate(YYMMDD)#
Authorization Information Qualifier 00
[ Application Sender's Code ] ACME
ImplementationClass oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin
[ Interchange Sender ID Qualifier ] ZZ
Replacement Character 0x7c
Subelement Delimiter 0x2b
Interchange Control Version Number 00200
[ Interchange Sender ID ] ACME
[ Interchange Receiver ID Qualifier ] ZZ
Tag Delimiter 0x3d
Usage Indicator P
[ Interchange Receiver ID ] ACME
Version/Release/Industry Identifier Code
Component Element Separator 0x2b
Decimal Separator 0x2e
Functional Group Time #SystemTime(HHMM)#
Responsible Agency Code X
Functional Group Date #SystemDate(CCYYMMDD)#
Group ecs File
Element Delimiter 0x7e
Create Trading Partner : Review
General
Trading Partner :GLOBALCHIPS
Communication Capability
Delivery Channel :GLOBALCHIPS_X12_DOC
Document Exchange :GLOBALCHIPS_X12_DocEx
Exchange Protocol Revision :AS2 - 1.1
Transport :GLOBALCHIPS_X12_Transport
Transport Protocol :HTTP
Transport Server :GLOBALCHIPS_X12_Transport_Server
Confirmation
Trading partner participant successfully added.
Agreement Details: X12_Agreement
Details
Agreement Id X12_1001
Description
Effective From Date
Effective To Date
Invocation Limit
Concurrent Conversations
Trading Partner Participants
ACME - Process_850 - Initiator
GLOBALCHIPS - Process_850 - Responder
GLOBALCHIPS - Process_997 - Initiator
ACME - Process_997 - Responder
If I tried to use enq_850 I am getting the following error:
AIP-50547 : Trading partner agreement not found for the given input values: From party[NAME] "GLOBALCHIPS", To party[NAME] "GLOBALCHIPS", Business action name "Process_850"; also verify agreement effectiveToDateHi Ramesh,
I have created Internal Deliver Channel as File Inbound for the Host Trading Partner and at the time of creating the agreement between the partners I have selected this channel.
And I am keeping the EDI document in the end point folder. I am giving the file name as XXX_850_4010_1_12345.dat.
Now I am not getting General validation error. This time I am getting the below error.
Please Let me know If my approch is correct?
Error Brief :
5000: Parser error - Missing trailer.
5042: Parser error - No matching parser schema was found.
Error Brief :
5000: Parser error - Missing trailer.
5042: Parser error - No matching parser schema was found.
iAudit Report :
<?xml version="1.0" encoding="UTF-16"?><AnalyzerResults Guid="{BACD5C1A-90BE-4D6D-8F48-97E66EE909B6}" InterchangeReceived="1" InterchangeProcessed="1" InterchangeAccepted="0"> <ExecutionDate>Friday, January 12, 2007</ExecutionDate> <ExecutionTime>02:26:40 PM (India Standard Time)</ExecutionTime> <AnalyzerReturn>Failed</AnalyzerReturn> <NumberOfErrors>2</NumberOfErrors> <ErrorByCategory> <Category Name="Rejecting"> <Severity Name="Normal">2</Severity> </Category> </ErrorByCategory> <Status>Finished</Status> <DataFile> <FilePath>D:\OraASRel2\ip</FilePath> <FileName/> <LastModified/> <FileSize/> <DataURL>file:\\D:\OraASRel2\ip</DataURL> </DataFile> <Interchange Guid="{A87B69C1-43E3-423B-AA44-9F0C3BE37CF3}" InterchangeAckCode="R" FunctionalGroupReceived="1" FunctionalGroupProcessed="1" FunctionalGroupAccepted="0" RError="1" NError="0" OtherWI="0"> <DataXPointer> <StartPos>0</StartPos> <Size>951</Size> </DataXPointer> <NodeInfo> <Links> <Link Name="InterchangeSenderQual">ZZ</Link> <Link Name="InterchangeSenderID">BLUECHIPS </Link> <Link Name="InterchangeReceiverQual">12</Link> <Link Name="InterchangeReceiverID">colourchips </Link> <Link Name="InterchangeControlVersion">00300</Link> <Link Name="Standard">X12</Link> </Links> <Properties> <Property Name="InterchangeAuthorizationInfoQual">00</Property> <Property Name="InterchangeAuthorizationInfo"> </Property> <Property Name="InterchangeSecurityInfoQual">00</Property> <Property Name="InterchangeSecurityInfo"> </Property> <Property Name="InterchangeSenderQual">ZZ</Property> <Property Name="InterchangeSenderID">BLUECHIPS </Property> <Property Name="InterchangeReceiverQual">12</Property> <Property Name="InterchangeReceiverID">colourchips </Property> <Property Name="InterchangeDate">061207</Property> <Property Name="InterchangeTime">1601</Property> <Property Name="InterchangeControlStandard_RepeatingSeparator">U</Property> <Property Name="InterchangeControlVersion">00300</Property> <Property Name="InterchangeControlNumber">000050524</Property> <Property Name="InterchangeAckRequested">1</Property> <Property Name="InterchangeUsageIndicator">P</Property> <Property Name="InterchangeComponentElementSep">0x2a</Property> <Property Name="DecimalSeparator"/> <Property Name="ElementDelimiter">0x7e</Property> <Property Name="ReleaseCharacter"/> <Property Name="RepeatingSeparator"/> <Property Name="SegmentDelimiter">0x2b0xd0xa</Property> <Property Name="SubelementDelimiter">0x2a</Property> </Properties> </NodeInfo> <FunctionalGroup Guid="{BF922FB1-9661-462C-B5A6-D868869A8C79}" FunctionalGroupAckCode="R" TransactionSetsIncluded="1" TransactionSetsReceived="1" TransactionSetsProcessed="1" TransactionSetsAccepted="0" RError="0" NError="0" OtherWI="0"> <DataXPointer> <StartPos>108</StartPos> <Size>843</Size> </DataXPointer> <NodeInfo> <Links> <Link Name="GroupSenderID">BLUECHIPS</Link> <Link Name="GroupReceiverID">colourchips</Link> <Link Name="GroupVersionNumber">004010</Link> </Links> <Properties> <Property Name="GroupID">PO</Property> <Property Name="GroupSenderID">BLUECHIPS</Property> <Property Name="GroupReceiverID">colourchips</Property> <Property Name="GroupDate">20061207</Property> <Property Name="GroupTime">1601</Property> <Property Name="GroupControlNumber">150524</Property> <Property Name="GroupAgencyCode">X</Property> <Property Name="GroupVersionNumber">004010</Property> <Property Name="GroupChildCount">1</Property> <Property Name="GroupTrailerControlNumber">150524</Property> </Properties> </NodeInfo> <Transaction Guid="{367C24CC-9747-4E49-9F02-AFC4295CF850}" TransactionAckCode="R" RError="0" NError="0" OtherWI="0"> <DataXPointer> <StartPos>171</StartPos> <Size>766</Size> </DataXPointer> <NodeInfo> <Links> <Link Name="TransactionID">850</Link> </Links> <Properties> <Property Name="TransactionID">850</Property> <Property Name="TransactionControlNumber">158192</Property> <Property Name="TransactionImplementationReference"/> <Property Name="TransactionChildCount">26</Property> <Property Name="TransactionTrailerControlNumber">158192</Property> </Properties> </NodeInfo> </Transaction> </FunctionalGroup> <InterchangeErrors> <Error ErrorCode="{03942C04-7909-4DFB-8F7D-6E5B3D8BDF48}" Severity="Normal" Category="Rejecting" Index="1" ID="50000200"> <ErrorBrief>5000: Parser error - Missing trailer.</ErrorBrief> <ErrorMsg>The Interchange Trailer is missing. The segment itself may be missing or the Segment Delimiter may be missing.{br}{br}Trailer was expected after:{br}{tab}Character: 952 </ErrorMsg> <ErrorObjectInfo> <Parameter Name="ErrorLevel">1</Parameter> <Parameter Name="Name">Parser</Parameter> <Parameter Name="_ec_CaseID">02</Parameter> <Parameter Name="_ec_dn_guid_">{A87B69C1-43E3-423B-AA44-9F0C3BE37CF3}</Parameter> <Parameter Name="_ec_start_pos_">952</Parameter> <Parameter Name="ec_error_scope">File</Parameter> </ErrorObjectInfo> <ErrorDataInfo> <Part1/> <Part3/> <DataXPointer> <StartPos>952</StartPos> <Size>0</Size> </DataXPointer> </ErrorDataInfo> </Error> </InterchangeErrors> </Interchange> <AnalyzerErrors> <Error ErrorCode="{9EE55FDF-8668-4499-9F2E-D9247519A850}" Severity="Normal" Category="Rejecting" Index="2" ID="50420000"> <ErrorBrief>5042: Parser error - No matching parser schema was found.</ErrorBrief> <ErrorMsg>The data starting at position 951 is not a valid EDI interchange. The remainder of the data file was ignored.</ErrorMsg> <ErrorObjectInfo> <Parameter Name="ErrorLevel">0</Parameter> <Parameter Name="Name">Parser</Parameter> <Parameter Name="_ec_start_pos_">951</Parameter> <Parameter Name="ec_error_scope">File</Parameter> </ErrorObjectInfo> <ErrorDataInfo> <Part1/> <ErrData/> <Part3/> <DataXPointer> <StartPos>951</StartPos> <Size>0</Size> </DataXPointer> </ErrorDataInfo> </Error> </AnalyzerErrors></AnalyzerResults>
2007.01.12 at 14:26:40:779: Thread-12: B2B - (ERROR) Error -: AIP-50083: Document protocol identification error
at oracle.tip.adapter.b2b.engine.Engine.identifyDocument(Engine.java:2403)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1263)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:1845)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:1777)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:1735)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:455)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:327)
at java.lang.Thread.run(Thread.java:534)
Thanks
Raghu -
Error code with HP DesignJet T520 ePrinter
Good day everyone, recently I had a customer drop off this machine for service. It is of a type I am completely unfamiliar with. Apparently the machine spends most of its time in a hard shell storage case in a warehouse and is only used when the group has to leave the area and travel elsewhere. They are leaving in a few weeks and pulled this machine out to ops ck. it. Upon power up, the machine shows the HP loading screen and then goes to a bluescreen. At the top there is a box of some sort that shows up in white that looks like a corrupted image. Below this is the message "805DE431". This message does not clear up with a power reset, unplugging it from the wall or anything else. I have searched the internet and through the service manuals and find no mention of an error message like this at all. Has anyone ever encountered something like this and can provide me with a direction of where to look? Thanks for any help anyone can provide.
Please, Turn on the printer and open the door ink. Check if a green LED behind the Main PCA is flashing. If a green led is not flashing, is possible that the Main PCA and Bundle Board should be replaced by onsite customer engineer.
-
Internal Table with Oracle's Error Codes
Hi,
Is there any internal table where is stored every oracle error code with it's Cause, Action and all the other similar stuff?
Att,For a table of all "ORA-" error codes and messages, you could do something like:
<BR>
create type t_oracle_error is object (
error_num varchar2(9),
error_desc varchar2(1024)
create type t_oracle_error_tab is table of t_oracle_error;
create or replace function OracleErrors return t_oracle_error_tab pipelined is
l_error t_oracle_error := t_oracle_error(null,null);
begin
for errNo in reverse -32799..0 loop
l_error.error_num := errNo;
l_error.error_desc := sqlerrm(errNo);
if l_error.error_desc not like '%Message % not found;%' and l_error.error_desc != 'ORA'||to_char(errNo,'FM09999')||': ' then
pipe row(l_error);
end if;
end loop;
return;
end OracleErrors;
select * from table(oracleerrors);
SQL> select * from table(oracleerrors);
ERROR_NUM ERROR_DESC
0 ORA-0000: normal, successful completion
-1 ORA-00001: unique constraint (.) violated
-17 ORA-00017: session requested to set trace event
-18 ORA-00018: maximum number of sessions exceeded
-19 ORA-00019: maximum number of session licenses exceeded
-20 ORA-00020: maximum number of processes () exceeded
-21 ORA-00021: session attached to some other process; cannot switch session
-22 ORA-00022: invalid session ID; access denied
-23 ORA-00023: session references process private memory; cannot detach session
-24 ORA-00024: logins from more than one process not allowed in single-process mode
-25 ORA-00025: failed to allocate
-26 ORA-00026: missing or invalid session ID
-27 ORA-00027: cannot kill current session
-28 ORA-00028: your session has been killed
-29 ORA-00029: session is not a user session
-30 ORA-00030: User session ID does not exist.
-31 ORA-00031: session marked for kill
-32 ORA-00032: invalid session migration password
-33 ORA-00033: current session has empty migration password
-34 ORA-00034: cannot in current PL/SQL session
-35 ORA-00035: LICENSE_MAX_USERS cannot be less than current number of users
-36 ORA-00036: maximum number of recursive SQL levels () exceeded
-37 ORA-00037: cannot switch to a session belonging to a different server group
-38 ORA-00038: Cannot create session: server group belongs to another user
-50 ORA-00050: operating system error occurred while obtaining an enqueue
-51 ORA-00051: timeout occurred while waiting for a resource
-52 ORA-00052: maximum number of enqueue resources () exceeded
-53 ORA-00053: maximum number of enqueues exceeded
-54 ORA-00054: resource busy and acquire with NOWAIT specified
-55 ORA-00055: maximum number of DML locks exceeded
-56 ORA-00056: DDL lock on object '.' is already held in an incompatible mode
-57 ORA-00057: maximum number of temporary table locks exceeded
-58 ORA-00058: DB_BLOCK_SIZE must be to mount this database (not )
-59 ORA-00059: maximum number of DB_FILES exceeded
-60 ORA-00060: deadlock detected while waiting for resource
-61 ORA-00061: another instance has a different DML_LOCKS setting
-62 ORA-00062: DML full-table lock cannot be acquired; DML_LOCKS is 0
-63 ORA-00063: maximum number of LOG_FILES exceeded
-64 ORA-00064: object is too large to allocate on this O/S (,)
-65 ORA-00065: initialization of FIXED_DATE failed
-66 ORA-00066: LOG_FILES is but needs to be to be compatible
-67 ORA-00067: invalid value for parameter ; must be at least
-68 ORA-00068: invalid value for parameter , must be between and
-69 ORA-00069: cannot acquire lock -- table locks disabled for
-70 ORA-00070: command is not valid
-71 ORA-00071: process number must be between 1 and
-72 ORA-00072: process "" is not active
-73 ORA-00073: command takes between and argument(s)
-74 ORA-00074: no process has been specified
-75 ORA-00075: process "" not found in this instance
-76 ORA-00076: dump not found
-77 ORA-00077: dump is not valid
-78 ORA-00078: cannot dump variables by name
-79 ORA-00079: variable not found
-80 ORA-00080: invalid global area specified by level
-81 ORA-00081: address range [, ) is not readable
-82 ORA-00082: memory size of is not in valid set of [1], [2], [4]
-83 ORA-00083: warning: possibly corrupt SGA mapped
-84 ORA-00084: global area must be PGA, SGA, or UGA
-85 ORA-00085: current call does not exist
-86 ORA-00086: user call does not exist
-87 ORA-00087: command cannot be executed on remote instance
-88 ORA-00088: command cannot be executed by shared server
-89 ORA-00089: invalid instance number in ORADEBUG command
-90 ORA-00090: failed to allocate memory for cluster database ORADEBUG command
-91 ORA-00091: LARGE_POOL_SIZE must be at least
-92 ORA-00092: LARGE_POOL_SIZE must be greater than LARGE_POOL_MIN_ALLOC
-93 ORA-00093: must be between and
-94 ORA-00094: requires an integer value
-96 ORA-00096: invalid value for parameter , must be from among
-97 ORA-00097: use of Oracle SQL feature not in SQL92 Level
-99 ORA-00099: timed out while waiting for resource, potential PDML deadlock
-100 ORA-00100: no data found
-101 ORA-00101: invalid specification for system parameter DISPATCHERS
-102 ORA-00102: network protocol cannot be used by dispatchers
-103 ORA-00103: invalid network protocol; reserved for use by dispatchers
-104 ORA-00104: deadlock detected; all public servers blocked waiting for resources
-105 ORA-00105: dispatching mechanism not configured for network protocol
-106 ORA-00106: cannot startup/shutdown database when connected to a dispatcher
-107 ORA-00107: failed to connect to ORACLE listener process
-108 ORA-00108: failed to set up dispatcher to accept connection asynchronously
-111 ORA-00111: not all servers started because number of servers is limited to
-112 ORA-00112: only created up to (maximum specified) dispatchers
-113 ORA-00113: protocol name is too long
-114 ORA-00114: missing value for system parameter SERVICE_NAMES
-115 ORA-00115: connection refused; dispatcher connection table is full
-116 ORA-00116: SERVICE_NAMES name is too long
-117 ORA-00117: value out of range for system parameter SERVICE_NAMES
-118 ORA-00118: value out of range for system parameter DISPATCHERS
-119 ORA-00119: invalid specification for system parameter
-120 ORA-00120: dispatching mechanism not enabled or installed
-121 ORA-00121: SHARED_SERVERS specified without DISPATCHERS
-122 ORA-00122: cannot initialize network configuration
-123 ORA-00123: idle public server terminating
-124 ORA-00124: DISPATCHERS specified without MAX_SHARED_SERVERS
-125 ORA-00125: connection refused; invalid presentation
-126 ORA-00126: connection refused; invalid duplicity
-127 ORA-00127: dispatcher does not exist
-128 ORA-00128: this command requires a dispatcher name
... -
Error code message not appearing
Hi,
I tried to create a set of labview error codes codes using tools-> edit error codes. A created a few test errors and saved the file in
C:\Program Files\National Instruments\LabVIEW 2009\user.lib\errors
The file called test-errors.txt appears as follows:
<?xml version="1.0" encoding="ISO-8859-1"?>
<nidocument>
<nicomment>
First error code file Sean
</nicomment>
<nierror code="5000">
Device unstable
</nierror>
<nierror code="5001">
Device Critically Unstable
</nierror>
<nierror code="5002">
Press Stop or device will begin countdown to destruction
</nierror>
<nierror code="5003">
Destruction Countdown Commenced, all organic life will be destroyed with a 2 mile radius in t - 10 minutes
</nierror>
</nidocument>
I then designed a simple VI to test the error codes, see the attachment. However the error message do not appear in the error out source box.
Does anyone know why LabVIEW is not recognising my error codes?
Rgds,
Sean
Solved!
Go to Solution.
Attachments:
test.vi 12 KBHi Sean,
OK - i took another look at your test VI and probing on the error out wire shows the description, but you are right it is not shown in the control. I have attached a VI that should solve the problem (I have tested it and i works ok)
All I have done is to use the general error handler, which returns the error code and description, write the description to the error cluster and set the general error handler to 'no dialogue' so that the message is not displayed.
Like i say, it works but if there is a better solution let me know!
David
David
www.controlsoftwaresolutions.com
Attachments:
Error cluster from error code (with description).vi 13 KB -
I just want my content. I am frustrated at trying to get on-line help. Either I will not get a reply to my feedback form, or the online support page has an error code, with "please try again later" or "start over". I have paid for this content, and cannot download their corrupted file.
Are you in a country where TV shows can be re-downloaded - if you are then have you tried deleting that copy from your iTunes library and re-downloading it via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes ?
When you say that you used the feedback page, do you mean the feedback page (which you won't get a reply to) or the 'report a problem' link from your purchase history on your account or the contact iTunes Support page ?
'report a problem' : log into your account on your computer's iTunes via the Store > View Account menu option and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that song and use the 'Report a Problem' link and fill in details about the problem (iTunes support should reply within, I think, about 24 hours).
contact iTunes Support : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption (if this page doesn't work then have you tried clearing your browsers history/cache and/or tried a different browser ?) -
Hello everyone,
I am working with CANopen for last 4 to 5 months, the device which i am using is Motor controller drive,Communication used is CANopen.
When I was testing for Emcy with the help of CANopen library, I am getting confused.
The plasma dictionary which I have describes the error codes for ex 3120h,3211h,3212h,3221h etc under voltage error.
But when i read the same error code with the help of Emcy Wait and Emcy Convert , Generic error bit sets .
The voltage bit does not glow and i dont get any error description , why is this????
Are the above error codes user defined??
When I open the Emcy convert VI there are some codes in which the voltage error is defined,the above error codes wont come in that category is it.
Thanks in advanceHi,
You wrote: " The voltage bit does not glow and i dont get any error description ", does that mean you expect the Voltage Error Bit set?
What is the error register Byte and the manufacturer specific error field array in your case?
The Emergency Convert Vi only knows the default errors . You can see them if you open the VI BD.
You could add your specific hex numbers thus you would get the correct message.
DirkW -
HT3964 what does error code "4MOT/2/40000004:ODD-4562" mean
william4510-imac error code with extended hardware test is error code "4MOT/2/40000004:ODD-4562" please help how could i find out if fan has stopped fully or just not going full speed ?- thanking you william4510
X423424X wrote:
You may end up having to take it to apple for them to take a look at.
Alternatively, contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine. -
Illustrator update: Error Code: U44M1I210
i am getting this error code with the log;
problem updating Illustrator CC:"Error installing this update. Please quit and try again later. Error Code: U44M1I210"
i have rebooted, restarted app ( no uninstalled though)
In addition Create Cloud itself ( the login box withthe app update information no longer starts
I am running update from the help menu in illustratorHi Brett,
Please refer the following help document on the problem.
https://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html
Regards,
Sumit Singh
Maybe you are looking for
-
Upgrading to V4 has lost all of my Bookmarks, I still have the restore files in my profile data but they will not load, I have tried importing the html backup file too but it didn't work either. How can I get them back?
-
Is DDL is suported in ogg from sqlserver 2005 to oracle 11g xe
Hi ! i want to use ogg to trasfer all tables and sp from sql server 2005 to oracle 11g xe. (using windows 2008,ogg112101_ggs_Windows_x86_ora11g_32bit.zip) is it suported? becasue i read "Extraction or replication of DDL (data definition language) ope
-
I'm having trouble setting up an AT-AO-6 board on a TMI PC (PV5000HX2) running NT 4.0 and using NiDAQ-5.1. I have the IRQ's set to 11 & 12 in the NiDAQ config and NT diagnostics show them as being registered to NIDAQ, but the board still fails to pas
-
Number range objects not maintained properly...??
Am doing a Purchase Requisition for asset material. While saving the PR document am getting error like I have went to SNRO and checked asset number range object ANLAGENNR , there intervals are maintained. i couldn't go further with the issue, Can any
-
IMac keeps requesting an invalid IP
I have a few iMacs that seem to all be having a very strange problem. The iMacs are setup with reserved IP's on the DHCP server. The maching I'm testing with for example is set to get 10.160.83.83 from the DHCP server. The iMac (Running 10.6.4) is se