M4E with N73 - MS Exchange server 2007

Hi Guys,
maybe I am stupid, but I can't seem to get this thing to work,
I have installed mail for exchange 2.3, finally the security setting is showing, I have approved the certificate but still I am getting the very general :
"Error in Exchange server. try again later."
to explain my steps:
1. configure the connection to use the HSDPA/Cellular link.
2. hostname: owa.domain.com , username and password.
server is Exchange server 2007 and configured behind an ISA server. OWA 2007 from a browser works fine.
please any assistance would be great, I don't even know how to approach it anymore.
thanks in advance,
Badsyntax (Simon)

Hi Imran,
As per my information Webcenter Suite 10.1.3.2 does not have any direct integration capability with MS Exchange Server due to DEEP LINK LIMITATION. Only possible work around is go for External Application SSO registration and then render that URL in IFRAME.
As far as WEBCENTER INTERACTION is concerned i think its seprately licensed and eventhough it's free you need extra Hardware to Install and Configure.
Regards,
Vindhyachal Sharma

Similar Messages

MimeMessage.reply() issue with MS Exchange Server 2007 Emails

I have an application that retrieves emails from an MS Exchange Server 2003 mailbox. The data from each message is read, validated and conditionally loaded to a table. If the message doesn't pass validation, a rejection email is sent back to the sender with an error message and a copy of the email. (We're using Java 1.5. However, I test with both 1.5 and 1.6.)
Also, if the message passes validation, positive notification is sent back to the sender.
Both processes use the method: javax.mail.Message.reply()It's coded as:
MimeMessage reply = (MimeMessage) message.reply(false);My organization is in the process of migrating to MS Exchange Server 2007. We've found that the reply() method no longer finds the sender method, thus unable to create a reply message. The error message we receive is:
javax.mail.SendFailedException: No recipient addresses
     at javax.mail.Transport.send0(Transport.java:110)
     at javax.mail.Transport.send(Transport.java:80)
     at org.ccci.gms.datacollector.DataCollector.sendReply(DataCollector.java:514)
     at org.ccci.gms.datacollector.DataCollector.processMessages(DataCollector.java:162)
     at org.ccci.gms.datacollector.DataCollector.main(DataCollector.java:101)After creating the MimeMessage object from the reply() method, I printed out the email header detail from both 2003 and 2007 messages. You'll note from below that the "To" or recipient address is missing from Server 2007.
MS Exchange 2003 works fine
From: [email protected]
To: [email protected]
Subject: Re: Report
In-Reply-To: <[email protected]>MS Exchange 2007 no longer works
From: [email protected]
Subject: Re: Reports
In-Reply-To: <[email protected]>I know I could just use the "addRecipient()" method to get around this problem. I wanted to know if anyone has encountered this issue. Please share the resolution. Any suggestions will be greatly appreciated.
Thanks,
LaelW

When the original message is accessed using IMAP, the reply method uses the information in the
IMAP ENVELOPE to determine where to send the reply. It first looks for the Reply-To address
in the ENVELOPE, then the From address.
Interestingly, when not using IMAP, the getFrom method returns the Sender header if the From
header is empty. The IMAP-specific code doesn't do that, although perhaps it should.
It would be interesting to compare the ENVELOPE data from the protocol trace in the two cases.
The ENVELOPE data will follow this syntax:
envelope     = "(" env-date SP env-subject SP env-from SP
          env-sender SP env-reply-to SP env-to SP env-cc SP
          env-bcc SP env-in-reply-to SP env-message-id ")"
So it's the first three address fields after the Subject that are relevant. If the From and Reply-To
fields are NIL, but the Sender field has a valid address, let me know. I should probably fix the
IMAP provider to fall back to the Sender field if the From field is missing.

Need Documentation on how to intehrate Exchange server 2007 with SAP portal

hi,
i need some documentation on how to integrate microsoft Exchange server 2007 with SAP portal.
can anybody help?

Hi Payel,
Pls check the links below..
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/7a/ec015c8446d447a83776d40f31c84f/content.htm">Link</a>
Note : As specified in the document, only the following versions of Microsoft Exchange server are supported:
● Exchange Server 2000
● Exchange Server 2003
Regards,
Venkat.

How to setup microsoft outlook 2011 with exchange server 2007

How to setup microsoft outlook 2011 for Mac with Exchange server 2007?

The folks who set up the Exchange Server should be happy to help you.

Hidden Contact Subfolders are visible on iPhone after sync with Exchange Server 2007

Hello,
We have encountered an issue where synchronizing the iPhone with Contacts from an Exchange Server 2007 mailbox, causes hidden contact subfolders (from Outlook) to be visible and appear in the Groups list in the Contacts App on the iPhone. This does not occur with Exchange Server 2010 mailboxes.
We have a 3rd party application that creates hidden subfolders in the default Contacts folder on Exchange Server 2007 mailboxes. The hidden folders do not display in the Outlook client, Blackberry or on an Android phone. We did see that they were showing up in Outlook Web Access until we applied this Microsoft Exchange Server 2007 Service Pack 3 Rollup 2 patch unto the Exchange server:
http://support.microsoft.com/kb/2210042 - A sub contact folder is still visible after you set the "PR_ATTR_HIDDEN" attribute to "True" in an Exchange Server 2007 environment.
After the patch was applied, the hidden contacts do not show up anywhere else. However, when we synced the mailbox to an iPhone and synced existing contacts, all of the hidden folders appear in the Contact Groups list. Is there a way to hide the hidden sub contact folders on the iPhone and prevent them from appearing in the Contact Group lists?
Any help provided would be most appreciated.
Thanks and Best Regards

Hi SBuchan,
I have an open case with Microsoft about it. It is an issue with ActiveSync in Exchange 2007 that sends the hidden objects. Microsoft tried to resolve this in Exchange 2010 by sending a delete message after sending the hidden objects to remove them from the device. Am awaiting to see if they will approve a design change to Exchange 2007 ActiveSync to prevent the synching of hidden objects.

Integrating MS Exchange server 2007 with OracleAS10g Portal

Hi,
We need to integrate MS Exchange server 2007 with our oracle portal so that a user can view his/her mailbox,calendar and to-do list
in the portal page.I can't find any such provider for exchange 2007.Is there any work around to implement this?
Thanks.

Here is one link that might be useful.
http://blogs.msdn.com/dotnetinterop/archive/2008/07/21/connecting-java-to-exchange-over-webdav-with-apache-httpclient.aspx
Also, I think Exchange 2007 might support web services and that would probably be a better solution than web dav. We are stuck on Exchange 2003 and so have to use the web dav bit.

I have problems to connect iCal 6.0 (Mountain Lion) with Exchange Server 2007

I used ICal with Exchange Server 2007 without problems with Lion. After I adopted Mountain it has been impossible to use ICal and I have obliged to use Outlook because It was not possible to connect ICal with Server.
I reinstalled Mountain and rebuilt Outlook data base, canceled cache and so on but without results. How cn I do?

I was having problems with this too. I remember it working okay in iOS 7 and then it breaking in iOS 8.
Fortunately, I'm now on the iOS 8.1 beta, and can confirm it's working fine for me. Just how it used to. - I guess that's one of the bugs that Apple's new software will bust. We'll just have to wait it out.

Hi, in our Enterprise environment, we have a single mac with Mavericks version 10.9.2 and Office for Mac 14.4.1. When setting up outlook, we are trying to connect to a mailbox on exchange server 2007.

Hi, in our Enterprise environment, we have a single mac with Mavericks version 10.9.2 and Office for Mac 14.4.1. When setting up outlook, we are trying to connect to a mailbox on exchange server 2007. We put in the EWS details in the server field since our autodiscover function is not functioning. But still it doesn't work. There are no errors, no popups. We turned on the logging and in the logs, it says a error of -3259. We are stuck and any help will be really appreciated.

I have a customer experiencing exactly the same issue. Their computer is running Windows 7 Pro with Office 2007 SP3. After seemingly exhausting all troubleshooting options, I backed up their data, formatted the hard drive and performed a clean install of
Windows and all their applications. It didn't solve the problem!
What's strange is the customer also has a laptop computer, running the same version of Outlook, and that doesn't experience any problems connecting to Office 365 on the same network.
My next step is to send the customer a new ADSL modem/router to try.
I have another customer on Office 365, also running Outlook 2007, and they also experience issues with emails sitting in the outbox while Outlook displays the status message “Outlook is trying to retrieve data from the Microsoft exchange server outlook.office365.com.”
In this case Outlook doesn't freeze/stop responding, like it does for the first customer I mentioned.

Agenda Syncronization with Exchange server 2007

I am unable to syncronize the agenda throug iSync...
I am trying to connect to an Exchange Server 2007 OWA, which default url is:
https://server/owa
We are using windows authentication too...
The Agenda and iSync don't show any kind of error... it just won't sync...
Is there anything else i can do?

iSync is for syncing Contacts and Calendars to mobile phones and PDAs.
It doesn't actually sync with any Exchange Servers (although, once setup, you can use the iSync menu bar item "Sync Now" to manually initiate a sync - that's all).
Are you referring to the "Synchronize with Exchange" option in the *Address Book* application?
If so, the *Address Book* forum is here:
http://discussions.apple.com/forum.jspa?forumID=1223

Syncing my iphone 3gs with exchange server 2007. Is there a way to delete from iphone, without it deleting from my outlook ?

syncing my iphone 3gs with exchange server 2007. Is there a way to delete from iphone, without it deleting from my outlook ?

iCloud does not sync which apps are installed on each device. Deleting an app off of one device has no effect on the others.

Mail / Calendar with Exchange Server 2007

Hi all,
We have a problem with Apple Mail and Calendar (Mountain Lion) connected to an Exchange Server 2007.
Apple Mail for no reason doesn't show the available data on the server. At first all goes right but after a few hours the data get corrupt. Folders disappear, mails aren't shown, ... The folders and mails are there in the server. I can check that with Outlook for Mac or on a collegues machine on Windows.
I tried:
- deleting the mail cache and mail data and restart
- removing the accounts and setting them up again
- creating a new user and trying mail in that user
None of those solved my problem.
Apple Calendar doesn't sync its data correctly. Example:
I create an event in calendar A. From that event I onvite calendar B to join the event. So far, so good. Everything just syncs fine. Then for some reason I delete the event from calendar A. In the server the event is still there. I checked in Outlook. This error is reproducable.
I tried:
- naming the user to <WORKGROUP>\<user>
- deleting the calendar cache and calendar data
None of those solved my problem.
Can anybody help me with this?

Hi and Welcome to the Forums!
The configuration I think you have is MS Exchange on the back end fronted (to the Internet) by Outlook Web Access (OWA). As such, Blackberry Internet Service is the interface between OWA and the BB...there is no direct interaction between the BB and the Exchange server. As such, only email will reconcile wirelessly in this configuration. Calendar, contacts, and other items must be reconciled via USB/BT tether.
Now, that said, there is a free solution to do what you desire -- it's called BES Express. BES is BlackBerry Enterprise Solution and provides OTA sync of email, calendar, contacts, etc. Full BES is not free. But BES-X is. If you truly require full reconciliation of all things from Exchange, I recommend you research BES-X.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Oracle HRMS Integration with Microsoft Exchange Server 2007

I would like to know if it is possible to integrate Oracle HRMS 11.5.10.x with Microsoft Exchange Server 2007 using Microsoft Identity Lifecycle Management (ILM) 2007?
Has anyone ever come across something like this and successfully achieved it? Does anyone know of a step-by-step guide (or forum discussion) to achieve this?
Response(s) will be highly appreciated.

hi,
We actually implemented integration of SAP with microsoft exchange server. It is not necessary for server and IIS to be in the same machine.
regards,
Ganesh.N

Newbie needs some direction with Exchange Server 2007

I am in school and I have been given an assignment that is kinda hard for me. I am not asking for answers but I am asking for direction. If you guys can point me to some research that will help me It would be much appreciated.
Here is the scenario:
Your organization plans to open a remote location that requires a server to host Exchange Server 2007
with the CAS, Hub Transport, UM, and Mailbox roles. Your Senior Administrator has assigned you the
task of choosing the hardware to support this server. Using the links below and internet research, design
a server capable of hosting the previously mentioned roles and 1,000 mailboxes. Choose a processor,
hard drive, and RAM.
Here are the questions associated with the scenario:
Questions
1. What is the total cost of the server you designed?
2. Would you recommend a multiple core processor? If so, why or why not?
3. What is the minimum amount of RAM necessary?
4. Would you recommend a RAID setup? If so, what RAID level? If not, what would you suggest for
fault tolerance.
Your guidance and expertise is much appreciated. Just point me in the right direction for research....

Hi Mikenater,
Thank you for your question.
1. What is the total cost of the server you designed?
A:the total cost depend on the price of hardware and software in your country, we didn’t give an exact answer.
2. Would you recommend a multiple core processor? If so, why or why not?
A: I suggest we use the multiple core processor, because Exchange consume much hardware resources. including CPU,RAM and so on, when we use multiple core processor, Exchange will deal with a mount of request without no response. It is convent for us to manage
Exchange server.
3. What is the minimum amount of RAM necessary?
A: AS you said that a server to host Exchange Server 2007 with the CAS, Hub Transport, UM, and Mailbox roles. The minimum amount of RAM is 4GB. However, if there are 1000 mailbox, we suggest the RAM is higher, we could refer to
the following link:
https://technet.microsoft.com/en-us/library/bb738124(v=exchg.80).aspx
4. Would you recommend a RAID setup? If so, what RAID level? If not, what would you suggest for fault tolerance.
A: Exchange 2007 have high availability for database, for example LCR,CCR,Scc or SCR, we could refer to the following link:
https://technet.microsoft.com/en-us/library/bb124721(v=exchg.80).aspx
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim

Using Exchange Server 2007 with 755p ???

After three phone calls to Palm customer service, I still cannot get my 755p to connection to Microsoft Exchange Server 2007 via Versamail. I have tried enumerous combinations without success. One customer service person told me I had to have a "certificate" with Server 2007 (unlike) but she could never tell me how to use it. (I have a line in my regular Outlook account set-up that reads "Only connect to proxy servers that have this principal name in their certificate:" I have that name in Outlook , but see no way of using it in Versamail. Without that certificate, it seems to reject my username and password.)
Any help here from someone who has actually been able to connect using the basic Versamail wizard and Exchange 2007? (I'm using Windows XP, but setting this up in the 755p -- not the computer. My service is Sprint.)
Post relates to: Treo 755p (Sprint)

Click on the following link for the support page for your device on the kb.palm.com webpage.
http://www.palm.com/us/support/treo/treo755psprint/
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
Click on the link for "email setup (Versamail)"
There are instructions there for setting up an exchange account.
If you need to install a certificate on the device, click on the following link for instructions on installing a certificate on a Palm OS device.
http://www.palm.com/us/support/downloads/versamail/certmodtool.html
Post relates to: Palm i705

After upgrading Exchange Server 2007 to SP3 with update rollup 13, OWA not working

Hi,
We have just installed Service Pack 3 and update rollup 13 on our Exchange Server 2007, but unfortunately our OWA has gone inaccessible.
PROBLEM- The following error comes up when we try to access OWA :
Exception
Exception type: Microsoft.Exchange.Clients.Owa.Core.OwaInvalidConfigurationException
Exception message: Object reference not set to an instance
of an object.
Call stack
Microsoft.Exchange.Clients.Owa.Core.OwaConfigurationManager.CreateAndLoadConfigurationManager()
Microsoft.Exchange.Clients.Owa.Core.Globals.InitializeApplication()
Microsoft.Exchange.Clients.Owa.Core.Global.ExecuteApplicationStart(Object sender, EventArgs e)
Inner Exception
Exception type: System.NullReferenceException
Exception message: Object reference not set to an instance
of an object.
Call stack
Microsoft.Exchange.Clients.Owa.Core.Configuration.CheckPublicFolders(ADSystemConfigurationSession session, ADObjectId[] pfdbIds, Boolean& allLegacy, Boolean& allLater)
Microsoft.Exchange.Clients.Owa.Core.Configuration..ctor(ADSystemConfigurationSession session, String virtualDirectory, String webSiteName, ADObjectId distinguishedName, Boolean isPhoneticSupportEnabled)
Microsoft.Exchange.Clients.Owa.Core.OwaConfigurationManager.LoadConfiguration()
Microsoft.Exchange.Clients.Owa.Core.OwaConfigurationManager.CreateAndLoadConfigurationManager()
ACTION TAKEN SO FAR :
1. Removed OWA virtual directories and recreated them again.
2. IIS has been reset.
3. Restarted the HUB/CAS server.
4. Created public folder database.
Even after doing all these activities, owa is still inaccessible. Please help.
Regards,
Ankur

Hi Ankur,
From your description, you can't access to OWA after upgrading Exchange server 2007 to SP3 rollup 13. Firstly, please locate to C:\ExchangeSetupLogs and make sure that it is a successful installation. If not, this issue often occurs.
If it is a successful upgrading, please follow the steps below for troubleshooting.
1. Open IIS Manager, click Default Web Site -> Authentication, make sure that Anonymous Authentication and Windows Authentication are enabled.
2. Click Default Web Site -> SSL Settings, check "Require SSL" and click Ignore.
3. Click Default Web Site -> HTTP Redirect, check Redirect (enter your
https://URL), check "Only redirect" box and Status code Found 302.
4. Expand Server Configuration -> Client Access ->double click owa ->Authentication tab. Check the Basic Authentication and check the Use forms-based authentication button Logon Format: Domain\user name.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

M4E with N73 - MS Exchange server 2007

Similar Messages

Maybe you are looking for