.m4r? Still work or not as ringtone?

Hey guys I was wondering if anyone has the problem of ringtones not working anymore. I used to rename the file extension to .m4r and then add to itunes library. It changes to .m4r fine and it shows ringtone but it will not play in iTunes. Did the new update of iTunes change this. It was awesome and simple just to change from .mp3 to .m4r. The song clip is 23 seconds so it is not to long. Any ideas?

Not sure about any changes with this associated with the recent iTunes update - I haven't seen anything posted here in regards to this yet, but do you have the current iLife version which is '08?
http://docs.info.apple.com/article.html?artnum=307108

Similar Messages

How do I travel to other countries and have my phone still work and not get any surprises in the bill?

How do I travel to other countries and have my phone still work and not get any surprises in the bill?

Depends on what you mean by "surprises" in the bill. Verizon's rates for using your phone internationally are pretty expensive, ~$0.99/minute. I would certainly think a 10 minute call for $10 would be surprising!
Well it would certainly depend on your phone, but if it is a 4G LTE phone, you can simply purchase a prepaid SIM card from the location you are going, switch that with the SIM card currently in your phone and you would be using your phone locally in that location. Of course you would need to notify people needing to contact you of your "temporary" new international phone number. Make sure you keep your Verizon SIM card safe as you would want to switch back to it when returning to the states.
You can see Verizon's global services information HERE. It includes a trip planner and would be more specific on the prices you would expect to pay if you chose to use Verizon's service rather than a local SIM card from where you are visiting.

HELP! iPhone 5S got wet, still working, was not backed up to iCloud. What to do???

Details: Dropped my iPhone 5S (which was in case, but not a waterproof case) into the bathtub where it was fully submerged for maybe 1-1.5 seconds, I grabbed it right away and got it out. I immediately shook out all of the water and ran to grab a bag of rice to put it in. As I went to put it in rice, I remembered that my iCloud was full and hadn't been backing up the phone, and I'm terrified that I might lose everything, especially my photos. I know, my fault for not having it backed up, I've just been putting it off. Everything seems to be working fine, aside from the fact that it's only got about 10% battery life (phone was almost dead when it was dropped in the water). Since the phone was still working, I quickly purchased additional iCloud storage and began a manual backup without plugging the phone in (I'm afraid I will fry it if I plug it in since there may be water still inside of it). Currently the phone is on, manually backing up, sitting in a bag of rice. I know that the phone may die because there wasn't much battery life left, but I'm praying that it is backing up my photos. I know that most of what I read said to turn the phone off before putting it in rice, but I am honestly more concerned with saving all of the photos at this point.
Is there something else that I should be doing? I keep wanting to check it to see if it is still backing up, but don't want to waste what is left of the battery.
Any advice would be amazing!

To add the same content from the iPhone 4 backup, you can only backup and restore using the original Apple ID (iCloud) and password account.
Content cannot be transferred from one Apple ID to another and accounts cannot be merged as noted here.

Flash crashes all the time, firefox crashes too and then will not work period, or my computer will say it is open when it is not, and I cannot open it. When I get on firefox it will not load anything! Explorer still works but not firefox!

I keep getting the error message, problem loading page, even for firefox home! I need help, I hate explorer, I want my firefox back!

Certainly disable FlashPlayer in your plugins by using
* Firefox Button -> Add-ons -> | Plug-ins
You need to get Firefox working again before you are going to be able to do anything with Firefox.
See if you can get Firefox to open in [[safe mode]] noting that when you get a window with a list of options just click on continue.
Also have a look at the articles
* [[firefox hangs]]
* [[firefox is already running but is not responding]]
*[[managing the flash plugin]]
Sorry but at present there are many possible causes of your problem and you will need to try Firefox's SafeMode &/or some of the suggestions in those linked articles in order to narrow it down a bit.

I can't search for apps in App Store why not? Genius still works but not search?

Why can't I search for apps but can still use genius?

I have same issue. It will let me know to update apps.
But if I want to search an app my friend may have. Nothing comes up after typing it in the search bar.
Same with the featured apps or the star charts , nothing comes up.
Now I just updated my iPad and so far so good. But my iPhone 4S is the problem since upgrading to ios6.
What to do.....
Apple...... You shouldn't rush these things.... Take your time and make it right .....
Any ideas .. Guess we just have to wait for apple to fix the issue...

Patch Database outage: SunUC still working but not Sunsolve patch download

Sunsolve's patch database is experienceing an unscheduled outage.
The impact is as follows:
* SunUC - no impact. Patches available
* Sunsolve download patche - not available.
* Patchpro - Solaris 6, 7, 8 - not available.
The patch DB team is has implemented a fix and is restoring the DB. The team anticipates patch availability via Sunsolve later this evening or early tomorrow morning.

Hi Duke,
I can reproduce the issue on one other TechNet feeds, but not yours... I have the same configuration as you..win8.1
http://social.msdn.microsoft.com/Profile/u/activities/feed?displayName=thumbd%D0%BEwn
As a guess.... (I have been doing software testing and frequently changing language and date/time settings in windows
8.1 without rebooting)...please try checking your current language and date and time preferences and then rebooting (shutdown then start, not the restart). I have one language pack installed but several language choices.
Incorrect date/time settings or local preferences may explain also the missing Frequent links from the new tabs page.
Could you download and install fiddler from http://telerik.com/fiddler
strangely when I put fiddler in the middle I can display the above feed.
here's the trace showing the authentication handshake.
GET http://social.msdn.microsoft.com/Profile/u/activities/feed?displayName=thumbd%D0%BEwn
200 OK (application/rss+xml)
GET http://social.msdn.microsoft.com/Profile/u/activities/feed?displayName=thumbd%D0%BEwn
200 OK (application/rss+xml)
GET http://social.msdn.microsoft.com/Profile/u/activities/feed?displayName=thumbd%D0%BEwn
200 OK (application/rss+xml)
GET http://social.msdn.microsoft.com/Profile/u/activities/feed?displayName=thumbd%D0%BEwn
302 Redirect to https://login.live.com/login.srf?wa=wsignin1.0&wtrealm=social.msdn.microsoft.com&wreply=https%3a%2f%2fsocial.msdn.microsoft.com%2fProfile%2fu%2factivities%2ffeed%3fdisplayName%3dthumbd%25D0%25BEwn%26stoAI%3d10&wp=MBI_FED_SSL&wlcxt=microsoft%24microsoft%24microsoft
CONNECT http://login.live.com:443
200 Connection Established ()
Thx.
Rob^_^

HT201412 All sounds are mute tho mute is not on. Keystroke sounds and other phone sounds but they ring tones and notifications are still working period I have tried turning the phone off and on please help

All the keystrokes sounds in different sounds that go with the phone have stopped working do you know how to make them go again? The ring tones and notifications down this still work but not that keystrokes are other in phone sounds. Is there something I can do other than turn the phone off and on to restore them?

Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as NEW.
If the basic troubleshooting steps don't work, then you'll need to bring your phone into Apple for evaluation and probable replacement.

If my iPhone was stolen and i want to reactive an old phone using that same number for the time being while i waited to see if I could get my iPhone back, would the iPhone still work while i was using a re-activated old phone of mine?

If my iPhone was stolen and i want to reactive an old phone using that same number for the time being while i waited to see if I could get my iPhone back, would the iPhone still work while i was using a re-activated old phone of mine?

If a new SIM is activated on the same account for the same number, any existing SIMs for that number are deactivated.
Why exactly would you care if the SIM in the missing device still works or not?

Does the Free iMovie HD download on the Apple Support site still work

Hi Forrest and Karsten, et. al:
Well guys, I just called to Apple store salesman to get my fix before someone commits me to rehab. I was going to buy the new iMac that came out today, with all the bells and whistles. i had to terminated the sale. The salesman had never heard of the free iMHD download for those who had purchased iM08. When I gave him the download URL, he said he couldn't pull it up on the Apple site and that he had to Google it up. He said that since he couldn't access it on the Apple site, the download is probably no longer available. He also said that, if I tried to load iM06 HD off my old iLife disk into Leopard, it would change my OS back to Tiger. I don't know how one can tell if the download still works or not unless one actually downloads it. I can't tell if it will download to leopard because I have a G4 with Tiger. Before I buy the iMac, I need to know if iMovie 06HD can still be downloaded, and if it will work on Leopard in the new iMac.

Yes Forest, I'm about to pull my hair out; all three or four of them! Carl, the link you posted to the free download is the same URL that I gave the Apple salesman over the phone, from whom i was about to buy an iMac. When he said he had never heard of the free download and couldn't pull it up on the Apple site, I suggested that he Google it. He did and could see it, but said that it was probably no longer functional because it was posted in 2006, and because he could not pull it up on the Apple site. This caused me paranoia that, maybe it's still there on the internet, but useless as the salesman said. This is the point where I asked him about loading iM06HD into a new iMac from my old ilife disk, and he responded that it would make Leopard revert to Tiger. This whole conversation really bothered me. What he told me is not consistent with the stuff I thought I had been reading and seeing about iM06 HD, i.e.,
( http://www.youtube.com/watch?v=_NNFnacJSdw )
Near the end of this video on AVCHD (Forest knows about my AVCHD issue) and iMovie, the reviewer mentions that one can import AVCHD video into iMovie 08, then move the clips into iMovie 06HD for editing (at least that's what I think I'm hearing). Either the Apple salesman or the reviewer in the video is wrong. I think you guys would agree that the Apple salesman "should" be the most credible. In the interest of being abundantly cautious with what I put into the new $2500 imac that I want, I want to know as much as I can about what I put in it. This way, I don't do something experimental and end up with a $2,500 smokey crater in my floor, and all three or four of my hairs singed off!
kenneth (grubworm)

I added a custom ringtone . Then later I tried to add another three set but now after sync . Am not able to get rid of the first one... It's still there as my custom ringtone. But my iPhone in iTunes shows all four... But the phone shows only one...?

I added a custom ringtone . Then later I tried to add another three set but now after sync . Am not able to get rid of the first one... It's still there as my custom ringtone. But my iPhone in iTunes shows all four... But the phone shows only one...?

Paul--you are a life-saver!! Worked great. I did have to look around to make sure I was getting 4.9 instead of 4.7 (even when the file was named 4.9 at techspot.com), but I finally got the right file, did the install as you suggested, and everything is now fine. One note, though, that I haven't seen mentioned in any of this thread: when I first tried to open up iTunes after getting back to 4.9, the following message appeared: "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes." I merely went to the old .itl file that was created when I did the update to iTunes 5, renamed it, moved it over to my now new 4.9, and iTunes opened fine. My library was a few days out of date, because of the few days' lag from the time I did the iTunes update, but that was easily taken care of, and everything's now working fine. Thanks again!!!

The screen on my iPhone 4 turned black while i was using it-it was not dropped or damaged in anyway. The phone itself is still working as it comes up in itunes when I plug the phone into my computer, but the screen is completley black. What can I do?

The screen on my iPhone has gone black while I was using it. It just "shut off". The phone is still working as I can hear/see it when it plugs into the computer, but the screen just wont turn on. I've tried the soft reset "holding down home and lock screen" and i've tried to restore settings. I went to the apple store and they said I had to send it to my provider (in another country) but my phone contract has run out.
Is there a way to fix this?
If not, is there some way apple can replace the phone? It's less than 2 years old. Surely the screen shouldn't just give out like that.
Thank you

You wrote...
' What can I do to solve this'
What have you tried...?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...

My USB port on my Macbook Pro stopped working and i tried the SMC reset and the one closest to the SD port still continues to not work. Is there anything i can do besides bringing it in?

My USB port on my Macbook Pro stopped working and i tried the SMC reset and the one closest to the SD port still continues to not work. Is there anything i can do besides bringing it in?

I would do another SMC reset. If nothing changes you should take the computer in to an Apple store for a free diagnostic. You should make an appointment.
http://www.apple.com/retail/geniusbar/

The Power Supply Fan is still working, but does not appear to respond to increased loads, and its speed cannot be increased using SMCFanControl. Any suggestions?

Hi all - My mac pro 1,1 has an enigmatic problem. It's quad-core, 3Ghz, running OS X 10.7.5. The problem began some months back, when running HD video conferences, HD streaming videos and some other graphics-moderate (I won't say intense) uses, such as slide shows in Just Looking. My machine has an ATY, RadeonX1900 card and 2 monitors - both Apple displays, one being 30 inch 2560x1600, the other being 24 inch 1920x1200.
When I start those types of graphics-moderate apps, after about 5 minutes, something would crash (the monitors making a noise as it did) and the displays would both go black. The power did not appear to be fully cut off from the monitors. I think that the underlying applications, however, did not crash. So, I could still hear and speak to people during video conferences, and I could hear the sound tracks of videos.
Attempts to restart the computer and get the monitors back did not immediately work to undo the problem, if done straight away. The only way to correct the problem (so as to have the monitors work) was to wait for a few minutes and then restart.
After a lot of puzzled looking at console logs (and I confess that I am not an expert), I ran into a blank.
But, because of the timing of the crashes (after ~5minutes use) and restarts (after some minutes wait), I reasoned that the problem might be temperature related.
Once on that path of thought, I found this article:
http://worldtv.com/blog/guides_tutorials/fixing_an_overheating_mac_pro_no_expens e_required.php
I installed both Temperature Monitor and SMCFanControl. And I experimented, and got interesting results:
Now to the puzzling bit: SMCFanControl shows that the speed of the Power Supply Fan doesn't vary much, even if I use SMCFanControl to ramp fan speeds right up. All of the other fans react to SMCFanControl, going up to and above 2500rpm when commanded. But the Power Supply Fan does not. Having watched it for a few days now, the Power Supply Fan, according to AFCFanControl, never varies outside of a range from about 600-640 rpm, regardless of what I do with AFCFanControl.
Also (and not surprisingly), whenever the graphics-moderate apps run, when I ramp all the fan speeds up using SMCFanControl, Temperature Monitor shows that the all of the temperatures within the machine plummet, except in the power supply locations. Power Supply Location 2 is the worst affected. Because the Power Supply Fan does not react as the other fans do, the "crashes" still occur.
I could post some screen shots of the read outs of SMCFanControl and Temperature Monitor, although I think I have covered the key points in this post.
It seems that the Power Supply Fan is still working, but does not respond to increased loads.
Instinctively, I'm worried that if that's right, it might be a hard problem to fix. Any suggestions? Help! I would really appreciate them!
Cheers
P

Thanks for your response Grant. I had already read about, and I think excluded, dust in graphics card/fan/assembly as a cause. The entire inside of the computer, including the graphics card/fan/assembly, is as clean as a whistle. It looks clean. I've cleaned the dust out every now and then (including a few days ago). Also, my undersanding (derived from the article, linked in my first post) is that I might expect to see high temperatures in the Northbridge and memory module B if the graphics card was overheating. According to Temperature Monitor, however, locations do not increase in temperature when I run the relevant apps. Finally, the graphics card/assembly does not feel too hot to touch.
It is strange that SMCFanControl lists the Power Supply Fan as being software controllable, if that fan is not. Still, your comments are consistent with my observations, as the fan simply does not respond to software control.
There are two upsides: First, I've something of a work-around. I've worked out what temperature must be achieved in Power Supply Location 2 for a crash to occur, and I can watch that location in Temperature Monitor, terminating the process before that treshold is reached. Of course, that's not ideal. Second, ramping all the other fans up does significantly delay the onset of the problem, and makes recovery time much quicker.
Is there any donwside to peridically ramping up the other fans when running the relevant apps? Given that it causes all of the other locations to cool significantly, could this lessesn the life expecancy of the mahcine? (I don't want to run the fans up all the time - that's like sitting next to a jet ready for take off!)
Also, a correction to my first post: Yesterday, with all the other fans running on full and running an HD streaming video, the Power Supply Fan did, eventually, slowly, come up to ~740rpm, which is much higher than the ~640rpm maximum I had previously seen, and this may have aided delaying the onset of the problem.
I'm not sure where this leaves me? The problem might now be able managed. Well, sort-of. But it's not eliminated.

I upgraded for Firefox 4 and now my simplePass identity protection (biometric scanner) on my laptop will not work. WHY? It still works with IE but I don't use IE.

I upgraded for Firefox 4 and now my HP SimplePass Identity Protection (biometric scanner) on my laptop will not work. WHY? It still works with IE but I don't use IE. It worked with the previous Firefox version but now when I use the internet, it doesn't even acknowledge I have the scanner. When I run my finger over it, it opens the settings panel but does not allow use of the already saved information or allow new information to be entered. I need this corrected. Any suggestions?

I asked this same question, and just received a response:
"Thank you for contacting DigitalPersona. There will be no update releases
for DigitalPersona Personal in the future. There will be no updates for
Firefox 4 nor Internet Explorer 9. IF they work they work, if they do
not work with DPPersonal, then you will have to decide to either keep
DPPersonal and forgo Firefox 4 or IE 9, or vice versa. DigitalPersona
is leaving the consumer market and is focusing on business applications.
In fact, DigitalPersona Personal will not longer be supported after
Mid-April of this year.
We apologize for any inconvenience this might cause. Sincerely, Tech Team "
In other words, there will be NO update.

Since v.6.0.2, was installed [I have Win XP] my eBay pages do NOT load properly ... the images cannot be enlarged and I cannot save things to My eBay. Still works OK with IExplorer .... I do not have a clue on the geeky stuff

Since v.6.0.2, was installed [I have Win XP] my eBay pages do NOT load properly ... the images cannot be enlarged and I cannot save things to My eBay. Still works OK with IExplorer .... I do not have a clue on the geeky stuff .... WILL THIS FIREFOX ERROR SOON BE FIXED ?
Don't know what more to ask. I looked at the known problems and couldn't make any sense of the answers

Upgrade your browser to Firefox 8 and check
* getfirefox.com

.m4r? Still work or not as ringtone?

Similar Messages

Maybe you are looking for