M5035MFP displays Permanent Storage Write Failed after firmware update to 48.301.7

After updating the firmware to 48.301.7, I have two M5035MFP machines that are displaying "68 Permanent Storage Write Failed" error messages. The users can press Continue and printing will proceed normally for another 10-50 pages when the message will appear again. The NVRAM and HDD have been reset/intiliased and they have been powered off/on several times.
This is also occurring on two other different models (6040MFP/9040MFP) which also started showing up after a firmware update about the same time.
Could this be a failed update? How would I go about downgrading to a previous firmware version?

Hi Rwelper,
I want to share with you this solution:
Please try first to reseat the Formatter/HDD and the memory DIMM and install the correcly then try:
First it is not adviced to downgrade the firmware at this step, you can try a cold reset and upgrade firmware again.
here, you need to remove the existent Firmware file on your PC and try to download it again from the HP Website, thus you can instaltly disable the firewalls and the antivirus and do this action.
NOTE: You can try a new upgrade firmware before you proceed with the Cold reset* of the printer.
Cold reset (Format disk also can be performed if this don't work): You can check the printer's manual to know how to perform it.
Please try an NVRAM init or Super NVRAM Init if this don't give a solution.
All these manipulations you can find in the printer's manual
Please note also that all these manipulations will delete all the current printer's configuration if it going to be working fine, so you will need to upgrade firmware and set your printer up again.
==> There is a need to delete files on the HDD / data on the DIMM, unplug and restart the printer.
The final solution is to replace the Formatter then the HDD if all these solutions don't bring a result.
Soudani
I work for HP
I hope this solution respond to what you need
You can post a like if you like this answer

Similar Messages

Can't stop Thunderbolt display from flickering white lines after firmware update (Yosemite)

I am having serious issues after the Thunderbolt Display Firmware Update 1.2. Running Yosemite on MacBook Pro and I am now getting white lines that gradiate from the bottom to the top of my screen across multiple browsers, apps and even the finder window anytime I move my mouse. I cannot take a screenshot (it stops when I try) but I posted a video here:
http://youtu.be/3zOKL1JFp5M
It is impossible to work this way and after 20 minutes of watching my screen constantly refresh anytime I move my mouse I am feeling nauseous.
Is there anyway to UNINSTALL this firmware update? I was not having this kind of problem before. Every once in awhile I was finding my Thunderbolt display would not wake up after sleep and I thought the firmware update would fix that, not cause more, crazier problems. It is causing this gradiating line problem on my Thunderbolt display AND my MacBook Pro screen, which is even more bizarre.

I updated and no issues with my 2012 Mini so may be computer related. I believe once a firmware has been "burned" into the chip it cannot be redone.

T410: Getting 'Windows Delayed Write Failed' after applying updates

I have a T410. A 2522-AN4. Running Windows XP/Pro.
I have the System Update process running. Every week I get notification of any updates, etc. that I may need to attend to.
On 10/29 the pop-up came up. There were a number of updates in the 'Optional' category.
I installed them all.
As soon as I rebooted the machine, I started received these 'Windows - Delayed Write Failed' popups. Basically the popup window names a file and indicates that 'Windows was unable to save the data for the file C:......'. Almost every boot up would give me one of those for a file with a name that ended in .....crmlog. Sometimes that would be the only message I got. Other times I might get one or two more popups during my use of the machine. Sometimes when printing which would have a file that ended in ....SPL. I never received these errors before applying these updates. I ran a CHKDSK on my drive. It was clean. I ran the HDD diagnostics from the boot menu. Ran perfectly. I did a defrag of my C: drive. No problems. I tried disabling Write Caching on the C: drive. Didn't help. I'm pretty much left to believe that one of these updates I applied has exposed me to this issue. Now the question is which one? And what do I do about it?
Here is what was installed on 10/29:
ThinkPad BIOS Update Utility US 1.32-1.12
Intel HD Graphics Driver for Windows XP(GM55) 6.14.10.5292
Intel Pro/1000 LAN Adapter Software for Windows XP 11.5.10.1030
Intel AMT 6.0-MEI and SOL Driver 6.0.0.1179D
Intel Rapid Storage AHCI Driver for Windows 32 bit 9.6.0.1014
Conexant Audio Software for Windows 7/Vista and XP 4.95.48.0(Win7/Vista)/3.66.146.0(XP)
ThinkVantage Active Protection System 32bit 1.72
ThinkPad UltraNav Utility 2.13
ThinkPad Power Manager 1.88
ThinkVantage Communications Utility 1.42
ThinkVantage Access Connections for Windows XP 5.72
Presentation Director 4.56
ThinkPad Hot Key Features Integration Package Setup 3.11.0001
Intel Wireless WiFi Link for Windows XP 13.03.0000
Thanks for any help or advice!

OK, that makes sense. That is the driver for the controller for the hard drive?
I double checked in Device Manager. I was at 9.6.0.1014.
According to the Lenovo site that is the latest. I also checked the Intel site and it also listed that same version as the latest.
So I did a Rolback of the driver. That seemed to go with no problems.
Restarted. Got the same error on that .....crmlog file during startup.
So I went back in and now I turned Write Caching back ON for my C: drive.
Restarted. No error on ...crmlog this time. I'll keep running and see if any more pop up.
I think I'm also going to look for some Lenovo diagnostics that run under Windows. I think I saw those.
Does the ThinkPad BIOS Update Utility US that also got installed on 10/29 actually update my BIOS?
That was the other area that looked concerning.
I'll keep you posted. I think we are on the right path here. Although I did have some hard drive trouble when I first got the machine in August. The tech I worked with said that there had been some known problems with the hard drives (320GB) in these machines. But it seems to have run fine since I got past that.
I'll keep you posted.

Qosmio X300 - Can't write disk after firmware update

I have a serious proble. After a firmware-update for my pioneer dvd-drive I can't write anything anymore on disks.
I really need some help there

I just received my new drive and installed it on my Qosmio x300 13E.
It is a LG GBW-T10N drive and it works perfectly. The included software allows me in combination with the newest driver for the nvidia gforce x9800 graphic controller to upscale films to a full HD resolution.
It is absolutely amazing. I just had to try it with a normal dvd and I had a full HD entertainment on my flat screen tv.
The replacement of the broken drive was easy. You simply need to loosen one screw on the bottom of the notebook and then you simply pill it out.
If anyone wants to do it too, I can give accurate advice for it.

WRT160NL Usb storage not recognized after firmware update

Hi.
I've been using an AC powered hard disk in my router for a long time, until i found the new firmware (Ver.1.0.04 Build 2), but after the upgrade the storage didn't work any more. (i don't remember the firmware version it had)
In the storage tab, in the configuration page i can see the disk, i can create sharings but these are not found in the windows network. (i'm using windows 7)
the disk has been tested using FAT32 and NTFS (232.8GB)
do you have a solution for this problem? or should i return to the firmware version it had (the one i don't remember)...
is there another version to switch to?
thanks for your help...
Solved!
Go to Solution.

Please kudo my post for if it solved your issue.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

TC reporting "Hard Drive is Failing" after Firmware update to 7.6.1

I've jumped in and updated my TC and expresses. Everything is working it would seem, however I'm getting intermittent amber alerts on the TC now saying the hard drive is failing. Time Machine backups are happening fine, no problem mounting the drive and the alert goes away after a few minutes. I've read other posts previously about this behaviour but never had it myself. Anyone else having this problem?

AT & T is infamouse for its out-dated PPoE technology. Still don't get how a company that big can still be so behind the times.
Unfortunately, I'm at the point when someone mentions AT&T and internet issues, I just cringe because 9 times out of 10 it's one dreaded PPoE problem you're going to get stuck into, or another.
Good luck with it...

Data recovery after firmware update

Hi guys,
does anyone know it it is possible to recover data after firmware update in N8? some data are preserved (videos) and some are lost (photos).
thx.

if you didn't backup them, there is no way to recover them
Greece Nokia X6 RM-559 v40.0.002

SOLVED Key board and mouse fail after last update

Both my wireless keyboard and mouse failed after I updated yesterday. I'm using KNOPPIX to post they both work with knoppix so its not a hardware problem.
KDE 4.1
Logitech keyboard and mouse
Last edited by normc (2008-11-08 00:05:37)

Thanks a lot
Just want to add that I had to edit grub at start up and add "single" at the end of the kernel line.
The reason is that switching to runlevel 3 didn't work for me.

3014 error i can't restore ipad after firmware update attempt

3014 error i can't restore ipad after firmware update attempt

See this thread with the same question.
https://discussions.apple.com/thread/5045573?tstart=0

After firmware update to V2.0.03, the web UI dos not look right. (WRT160 V2)

Hi
After firmware update from V2.0.01 to V2.0.03, the web UI dos not look right.
I can't see menus, just version number and the basic setup page.
Router Linksys WRT160 v2.
Allan

Hi
Thanks for the reply.
I't works ok now.
Thanks again.
Allan

Restoring after firmware update - Ways :)

Hi All,
Nowadays we are receiving quite a few complaints that customers are unable to restore the application after updating their firmware. I would like all to discuss to come up with some ways to restore their applications after firmware update.
Before updating firmware
Customer can backup his phone using Nokia PC Suite's Content Copier application.
He can store his Contacts and Messages using Nokia Communication Centre as .csv file or .txt file.
For his Contacts he can sync with pc suite supported sync applications.
Messages he can store in Memory card and he can make a backup of memory card in PC.
If he is using Nokia PC Suite for his Multimedia items he can use Image Store if he is using Nokia PC Suite or Nokia Photos if he is using Nokia OVI Suite.
For Music he can use Nokia Music Manager or Nokia Music.
Once after updating his firmware, if he is unable to restore he can get those from above said applications.
If his calendar entries are not restored(as in case of some of Nokia e 71s and Nokia N 95/95 8 GBs), for God's sake if he has got one more similar device(or device having switch application on phone), he can restore the backup file to another phone having switch application, then he can transfer his data (Contacts, Calenders etc ) to his original phone
Dear Forum members, if you have got any other work around please let me know regarding the same, which will help our customers

Hi,
If you have issue in Nokia PC Suites, [subject to your phone's compatibility with Nokia OVI Suite 2.0.0.10 ],
you can install Nokia OVI Suite 2.0.0.10 and check if you can take backup and restore it later.
Also i would suggest to use USB for taking backup, since it will be faster than Bluetooth. Also you can select one category at one time(say backup contacts alone, then Calendar, then messages etc and so on ....)
Its better to skip memory card backup while backup-ing other Phone data for faster backup. Memory card backup can be done separtely(since it wont be affetcted while updating firmware, users can safely remove memory card while updating firmware)
Nowadays though recent phones has got UDP(User Data Prevention i.e., even if you update your phone's firmware, your data wont get erased ), still it is recommended to backup your phone data.
Hope this could help
I welcome our experts to add more details related to this topic.

Problems after firmware update 52.0.007

Hi,
I got my phone back after the shop fixed a problem and updated the firmware to the latest version 52.0.007.
But now I have following problems:
I can't get the calendar anymore to show up on the homescreen, even after checking the checkbox to do so
The Radio app. is gone
Does anyone has a solution for this?
Iwan

It may sound crazy but sometimes you need to "hard reset" device after firmware update (beware all data erased) by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by yourself). Sometimes UDP = User Data Prersevation feature of 5800XM can carry over corrupt entries when updating.
Happy to have helped forum with a Support Ratio = 42.5

Ovi Maps 3 don´t start after firmware update (6220...

Hello!
a few days ago I installed ovi maps 3 on my nokia 6220c and it works well. Later I updated the firmware from version 03.06 to 05.15.
After firmware update ovi maps don´t start-> "Cannot open application. Install latest version from nokia.com/maps."
But Nokia Map Updater says, there are no updates for my maps.
What´s wrong?
Can I reinstall Ovi Maps 3? Or is it possible to install Ovi Maps 3 new?
thanks

Hello!
The Map Updater said: "there is no update for your phone" ...because maps 3 is already installed.
But in the meantime I have found a solution!!
I downloaded maps 2.0 from the German nokia page and installed it. Later I started Map Updater and could update to Maps 3 and now it works!!!
I think the problem was: I first updated to Maps 3 and later updated the firmware. There was any older version of fixes included in the firmware update, so Maps 3 was damaged...
thanks
sorry for my bad English

Restore fails with "Firmware update failure. Disk write Error" message

I am going totally bonkers with this one. My Shuffle stopped working suddenly.
My iTunes was not able to read the contents of the iPOD and there seems to be a corrupt filesystem. After reviewing various posts, I have tried the following with little success:
1. Tried Restore using the Updater tool that came with the Shuffle (2005-09-23). I kept getting the "Firmware update failure. Disk write Error"
2. Downloaded the new updater tool (2006-03-23) and tried restore again. I got the same error message again.
3. Tried formatting using Windows format, it is not able to complete the format
4. Tried chkdsk. Get an error message saying "CHKDSK is not available for RAW drives."
5. Tried connecting it to a different computer and tried pretty much the same steps. Similar results.
I am using USB 2.0 both on my current Thinkpad as well as the other computer I tried with.
I am totally clueless and am not sure how to go about fixing this one. Though there have been lots of posts about this, I haven't been able to find a solution that works for me. Any thing else that I may have missed out which I can try?
Thanks,
Kris
Thinkpad Windows XP Pro

hiya!
just checking. have you worked through the possibilities from this document yet?
"Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod
given that you're connecting to a laptop, we'd better check on this possibility too:
iPod not recognized when connected to Windows laptop over USB
... and even though you aren't using a Toshiba, this technique might be worth a try (if all else fails):
iPod not recognized correctly on Toshiba laptop
love, b

IMac won't start with Thunderbolt Display connected after firmware update

After updating my thunderbolt display firmware to version 1.2 this morning via the App Store, my mid-2014 iMac won't start up with the external display connected. I can get the iMac to start up only by disconnecting the display's thunderbolt connector. After the iMac comes up, I can reconnect the display and everything appears to function normally. I've tried several restarts and the iMac won't start up with the display connected. Anyone else experience this?

Hello rameta,
It may help to reset your Mac's SMC and PRAM.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Reset your computer’s PRAM
http://support.apple.com/kb/HT1379
Cheers,
Allen

M5035MFP displays Permanent Storage Write Failed after firmware update to 48.301.7

Similar Messages

Maybe you are looking for