M58 6258 - Image Ultra Builder Unattended Deployment Problem With R&R

Hi,
We are trying to build a Lenovo M58 using Image Ultra Builder (IUB)
We can get everything to work silently in unattend mode except Rescue and Recovery.
The version we are using is 4.21 and installing the .exe via a batch file using  /s /qn switches, which are silent, and quiet with know intervention switches.
The IUB is running the install but it requires a manual intervention process to run through the setup process. Once this has been done then it does perform a BaseBackup and puts this on the hidden secondary partition of the HDD.
Does anyone know of anyway to get this to run silently without the need of a manual intervention.
We have tried packaging R&R into an MSI but without success.
Any help would be appreciated
Nick
Moderator Note; subject edited to reflect thread content.

Found out this was a limitation to do with apex <= 3.x .. see http://marcsewtz.blogspot.com/2008/06/one-question-about-pdf-printing-feature.html

Similar Messages

  • Image Ultra Builder 3.x issue with T61 Network Driver load

    Hello,
    I am having issues with a Network deployment of an image on a T61 (7659-12U) During the intial boot up phase with the Network Boot disk that was created from IUB, I receive and error 1231 - The Network Location cannot be reached..  I am currently using IUB for deployment of A31, T40/42 as well as the T60 model line. None of these loads are having the problem.
    Any help on this would be very much appreciated.
    Thank-you in advance.
    Ed

    Hi,
    IUB 4.01 is using WINPE 2.0<Vista based> and IUB 3.1 was using WINPE 1.0/1.1<XP Based>.
    This has nothing to do with the actual image deployment. It's just that the WINPE looks more like
    Vista. And this is why the method changed after you updated from 3.0/3.1 to 4.00/4.01.
    To answer your questions from before:
    1) Does updating IUB to version 4.01 still allow me to deploy Windows XP ?
    Yes, it's still supported and possible.
    2) Where on the boot CD should the new driver files be located. I took this to be PREBOOT\DRIVERS ?
    As the new IUB is using WINPE 2.0, the best location for the NIC drivers is the file :
    tvtos\winpe.wim
    However, this is my advice.!
    For my Image deployment I'm no longer using the CD for network deployment. I'm using USB key which gives me more options for the image deployment and the automatization of the deployment process.
    However, if you want to use CD for network deployment, then you can do it in following way.
    !!!NOTE: this is not the offical way, nor the supported way, but trust me, that it's working like charm !!!
    - go to your repository location %repositorylocation%\modules
    - find the file called "Z633003A.TVT" and open it using your fav zip application
    - after you open this file, go to following location: tvtos\
    - extract the "winpe.wim" and using WAIK unmount this file and add the NIC drivers into this .wim file
    - after all the drivers are in the winpe.wim file, just copy it back to the "Z633003A.TVT" file and create a new Deployment CD
    How to add NIC driver using WAIK:
    This is prety easy step, but for more info, check following link:
    http://www.svrops.com/svrops/articles/winvistape2.htm
    As I described earlier, I'm using USB key for Network image deployment, so I have not done it this way, but I have done it a bit simplier.
    Here are my steps:
    - created a Distribution USB key <suing the same method, that you are using when you create a Network deployment CD, but instead of a CD I select my USB key>
    - once the USB key was created successfully I unmount the "tvtos\winpe.wim" file and add all the NIC dirvers into it
    This is all that I have done.
    Yes, of course there are couple other steps, that I do, like modifying the BCD file, adding other WINPE files, diagnostics and other deployment tools, however, this is not realy a part of IUB, I'm using it for my WDS server and other deployment tools, that I need to use. If you know, what I mean, then you surely understand, that it's a live safer to have everything on one USB key, then on multiple CD where I need to search throught all of then to find the correct CD.
    Let me know, whether this method is more suitable for you.
    As described above, this is not the realy official/supported way, but it's working for sure.
    Rgrds 

  • Deploying problem with remout OC4J (10.1.2)

    Hello!
    I have a problem with PDK-Java Portlet deployng. I'm relatively new in this field.
    I use Jdeveloper 10g (10.1.2). I have read in the Jdeveloper help how to deploy portlet on remout Application Server.
    I start the following comand in server's console where OC4J installed:
    java -jar ${ORACLE_HOME}/j2ee/home/admin.jar ormi://myserver:3204 my_pass -deploy -file Oc4jDcmServlet.ear -deploymentName Oc4jDcmServlet
    and get the Error: Unable to find java:comp/ServerAdministrator: Lookup error: javax.naming.AuthenticationException: Invalid username/password for default (adminuser);
    I login to Enterprise Manager 10g Application Server Control by the same user(adminuser) and the same password (my_pass).
    Anybody know how to resolve this problem?

    did you change the admin password after installation?
    Oracle doesnt change all passwords, the password entered during installation of OC4J is the password you have to use for deployment from JDEV
    atleast, thats my experiance

  • Mulitproject solution build failed with batch build but no problem with F6

    when I tried to use batch build on a solution that I have built many times successfully before, the build failed without error message.
    F6 works and no problem with debug using F5 either.
    the build order and dependencies have been verified
    what should do to find the cause of build failure?
    btw: build failed near very end, apparently the last step to completion in the progress bar

    Hello,
    >> what should do to find the cause of build failure?
    Please follow the blog to see how to debug MSBuild script with visual studio.
    http://blogs.msdn.com/b/visualstudio/archive/2010/07/06/debugging-msbuild-script-with-visual-studio.aspx. You can also add logging feature in MSBuild.
    http://msdn.microsoft.com/en-us/library/ms171470%28v=VS.90%29.aspx.
    Feel free to let me know if you have any concerns.
    Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. Click HERE to participate
    the survey.

  • General install and deployment problem with WLS clustering on two boxes

    Hi,
    I've come across a general installation problem with WLS with a cluster spanning two different physical machines and two Managed Servers, one Managed Server per physical machine.
    The problem is, starting from scratch, you install WLS on both physical machines. You can then use the config wizard to create the domain, cluster and managed servers, but this is a manual typing in process.
    So we've now got a WLST Script which we run with "java weblogic.WLST domaincreate.py domain.properties". This is good as it creates the domain, cluster, managed servers and JMS modules.
    Now the trouble is, it doesn't do anything to the 2nd physical machine which will be running only the 2nd Managed Server.
    One dirty way to get around this in order to start the 2nd managed server was to copy the domain directory to the 2nd server, but I'm sure this is bad practice and what you can actually do is improve the WLST script to actually, but the same as the config wizard and dump the nessary information to the 2nd physical machine in order so you don't need to copy the domain directory across so that it will startup straight after running the WLST.
    Any help appriecated.
    Surfbum.

    Hi I think I've found the answer. You can build a managed server template using the pack command.
    http://e-docs.bea.com/common/docs90/pack/tasks.html

  • When Place Image in Photoshop, error msg: 'Problem with Photoshop CS6 caused program to stop working

    When I 'Place Image' in Photoshop, the following error msg comes up: 'A Problem with Photoshop CS6 has caused the program to stop working, close programme?'
    Do I need to adjust my set-up to run this? The PC operates on a 32-bit  system/Windows 6.

    You need to provide much more info: What files are you trying to place into what document? What are the document sizes, resolution, color mode etc.? Anything else we should know about? This could be a million things from color profile issues to color space mismatches to the files to be placed being damaged or badly structured or a importer module being broken. Also provide exact system info and crash logs:
    Working with your Operating System’s Tools
    Mylenium

  • Image Ultra Builder 5

    "Service partition not found (SPDrive is not found) There was a Problem Creating or Resizing the Service Partiotion"  I am getting the above error mesage while deploying the image with IUB 5, could some one pls. advice me how to fix it?
    Thanks,

    I think I may have found one of the issues surrounding this.  it would be good if a  lenovo staffer could respond.
    in the "ImageUltra 5 - Windows 7 Customizations" application module in the OS/Languages tab the only ticked OS fields are for Windows Vista 32 and 64 bit !!!!!!!!!  not Windows 7??????
    If I'm right this would mean that it gets filtered out; yes?  so no Windows 7 Customizations therefore not a proper reboot install sequence etc.  This module is gold.  so how can I edit / fix this?

  • Image Ultra Builder 4.0: "An error occurred while connecting to server: Check the server"

    Ladies & gentlemen 
    I am using evaluation version of ImageUltra Builder 4.0 for Windows
    XP. Both server and console have been installed on the same machine.
    When I try to add a new repository, then after pressing the final
    "Finish" button I get the message "An error occurred while
    connecting to server: Check the server". 
    This message appears when the service IUServer runs. 
    I have not found any mention of this error neither in the Internet nor
    in the documentation. Can any one suggest what could have been done wrong?
    Thanks, Ilya Druker

    I've had the same problem when trying to generate a database on an external storage unit. When I create a new repository there are two option:
    1) Location: - This is the location where you want to store the files itself. This server does not have to have a database running on it
    2) Server: - This is the name of the server that actually runs the DB2 database that keeps track of the repositories. This server does not have to be the same as the location where you store the files. This could also be the IP address of the server, not necessarily the name.
    The documentation for this is somewhat confusing, but the above stuff works atleast. I have tried in never versions than 4.0 as well.

  • Java Stored Procedure Deployment Problem with JDev 3.1.1.2

    Dear JDeveloper Team:
    I am having a problem deploying a test Java stored procedure to the database. In the Deployment Profile Wizard Connection tab, it displays no connection in the connection dropdown even though I have defined some connections that have been sucessfully connected to the database.
    Please help.
    Thanks,
    Tom

    Tom,
    Verify that your Connections are valid as follows:
    Double Click on the Connections folder of JDeveloper Navigator.
    This opens up the Connection Manager.
    Make sure you have defined JDBC Connections.
    Pick your connection of intrest and select Edit... and then press the Test button to test the conneciton.
    If this is a valid JDBC connection, then it should appear later when you run the deployment wizard.
    -John

  • Image 10.7.3. Problems with settings when new image is used on another mac

    10.7.3 image.I create an image of 10.7.3 using disk utility with the "Require an admin password to access system preferences" checked under Security and Privacy, once i move the image to another mac it reverts and unchecks the setting "Require an admin password to access system preferences. There is no problems creating the image or loading the image on new mac. There is something that is reverting the setting from original image on new mac. I am not using a 3rd party software to create an image. As what i understand the image should exactly the same. Not sure what is causing these problems since it only happens when using 10.7.3 and did not happend on 10.7.2. Any feedback will be appreciated. thanks

    Also AppleScript for QuickTime player control is broken. Instead of moving playhead forward, this AppleScript now moves it backward!
    set the increment_amount to 40
    tell application "QuickTime Player"
              try
                        ignoring application responses
                                  tell document 1
                                            set the movie_length to the duration
                                            repeat
      step forward by the increment_amount
                                                      if the current time is equal to the movie_length then exit repeat
                                            end repeat
                                  end tell
                        end ignoring
              end try
              try
                        ignoring application responses
      play document 1
                        end ignoring
              end try
    end tell

  • Deployment problem with glassfish v2

    hi,
    when i am trying to deploy a WAR file on glassfish v2 following errors are coming.....
    Timestamp Sep 11, 2008 14:30:26.006
    Log Level SEVERE
    Logger javax.enterprise.system.tools.deployment
    Name-Value Pairs ThreadID=17;ThreadName=Thread-682;_RequestID=b8995ab4-b83a-4c5f-a476-acd3863f6428;
    Record Number 1424
    Message ID Exception occured in J2EEC Phase com.sun.enterprise.deployment.backend.IASDeploymentException
    Complete Message Error expanding archive C:\Users\ADMIN\AppData\Local\Temp\systemcontrol53465.war; please see the server log file for more information at com.sun.enterprise.deployment.backend.J2EEModuleExploder.explodeJar(J2EEModuleExploder.java:359) at com.sun.enterprise.deployment.backend.WebModuleDeployer.preDeploy(WebModuleDeployer.java:131) at com.sun.enterprise.deployment.backend.ModuleDeployer.doRequestFinish(ModuleDeployer.java:171) at com.sun.enterprise.deployment.phasing.J2EECPhase.runPhase(J2EECPhase.java:191) at com.sun.enterprise.deployment.phasing.DeploymentPhase.executePhase(DeploymentPhase.java:108) at com.sun.enterprise.deployment.phasing.PEDeploymentService.executePhases(PEDeploymentService.java:919) at com.sun.enterprise.deployment.phasing.PEDeploymentService.deploy(PEDeploymentService.java:279) at com.sun.enterprise.deployment.phasing.PEDeploymentService.deploy(PEDeploymentService.java:788) at com.sun.enterprise.management.deploy.DeployThread.deploy(DeployThread.java:187) at com.sun.enterprise.management.deploy.DeployThread.run(DeployThread.java:223)
    but the page is running perfectly fine in my IDE.i have observed that this problem occurs when i use any .js file in my project.
    Please help

    As the stack trace states ("please see the server log file for more information"), you should look at the server log to get more details on what is causing this.

  • MDM Business Package : Deployment problem with SDM GUI

    Dear Experts,
    I want to deploy the MDM Business Package on to the j2ee engine.However, when i go to the SDM GUI and select the first SDA(com.sap.mdm.tech.mdm4j.sda) file for deployment, it just hangs and nothing happens after that.I feel something is wrong with the SDM GUI.
    Please let me know any possible solutions/alternatives to this problem.
    Thanks,
    Karambir Singh

    Hi Karambir,
    1) Are you trying to deploy the sda from your local machine or from a network drive? If a network drive, try copying it to your local machine and then deploying it.
    2) If the SDM is connecting to a remote application server, it can sometimes take a long time to get a response.
    3) Can you deploy other deployable archives via the SDM, or is only mdm4j.sda causing a problem?
    Walter

  • OSB project deployment problem with MFL file

    Hi,
    I have created a OSB project to transform a xml message into a text file. For this I have created a mfl and the necessary proxy/business service. I can generate the sbconfig.jar from OEPE tool. But while trying to deploy the sbconfig.jar (generated from OEPE toll) in the OSB server the following error is coming:
    <Sep 30, 2013 3:19:06 PM CEST> <Error> <ALSB Console> <BEA-494002> <Internal error occured in OSBConsole : com/bea/nonxml/util/NonXMLSchemaGenerator.genXsdFromMfl(Ljava/lang/String;Ljava/io/Reader;)Ljava/lang/String;
    java.lang.Exception: com/bea/nonxml/util/NonXMLSchemaGenerator.genXsdFromMfl(Ljava/lang/String;Ljava/io/Reader;)Ljava/lang/String;
            at jsp_servlet._jsp._main.__errorpage._jspService(__errorpage.java:134)
            at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
            at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
            at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
            at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
            Truncated. see log file for complete stacktrace
    Caused By: java.lang.NoSuchMethodError: com/bea/nonxml/util/NonXMLSchemaGenerator.genXsdFromMfl(Ljava/lang/String;Ljava/io/Reader;)Ljava/lang/String;
            at com.bea.wli.common.mfl.MflExecutor.create(MflExecutor.java:76)
            at com.bea.wli.sb.resources.mfl.MflExecutor.create(MflExecutor.java:72)
            at com.bea.wli.sb.resources.mfl.MflEntryHelper.validate(MflEntryHelper.java:90)
            at com.bea.wli.sb.resources.mfl.MflTypeDef.validate(MflTypeDef.java:54)
            at com.bea.wli.config.validation.ResourceValidator.validateContents(ResourceValidator.java:118)
            Truncated. see log file for complete stacktrace
    >
    [INFO ][alloc  ][Mon Sep 30 15:19:11 2013][00464] [YC#33320] Pending requests
    Can someone please help me out regarding this problem and let me know the reason.
    I am using 11.1.1.5.0 version of OSB.
    Please let me know if you need any further details.
    Thanks.
    Rahul

    Hi Ahul,
         It may cause because of the following problem,
    1) Make Sure that your MFL is working perfectly
    2) Make sure that your OSB Server is Running with out any error..
    Let me know still your facing the problem
    Regards,
    Kiran

  • Deployment problem with update

    Hi,
    I'm new in SAP NetWeaver Developer Studio etc. So I installed a local test environment on my pc and everything works fine. Then I created the first test project (Calculator) deployed and tested it. No problems. Looks good. Then I tried to make a simple change (changed text) in the JSP file and deployed it. The deployment succeeded but the changes are not visible in the browser. I exported the EAR file and looked in the contained JSP file; there are the changes available. So I guess something runs wrong during deployment to the J2EE environment?!
    Any ideas where I failed ???

    Hi,
    I'm new in SAP NetWeaver Developer Studio etc. So I installed a local test environment on my pc and everything works fine. Then I created the first test project (Calculator) deployed and tested it. No problems. Looks good. Then I tried to make a simple change (changed text) in the JSP file and deployed it. The deployment succeeded but the changes are not visible in the browser. I exported the EAR file and looked in the contained JSP file; there are the changes available. So I guess something runs wrong during deployment to the J2EE environment?!
    Any ideas where I failed ???

  • Deployment problem with finder method

    I have a problem deploying an application that was working prior to my adding a finder method to one of the entity beans. Here is the Descriptor from the EJB Module that i created (which appears to be ok):
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE ejb-jar PUBLIC "-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN" "http://java.sun.com/dtd/ejb-jar_2_0.dtd">
    <ejb-jar>
    <display-name>RFXModule</display-name>
    <enterprise-beans>
    <session>
    <display-name>RFXManager</display-name>
    <ejb-name>RFXManager</ejb-name>
    <home>au.com.alphawest.trader.rfx.business.management.RFXManagerHome</home>
    <remote>au.com.alphawest.trader.rfx.business.management.RFXManagerRemote</remote>
    <ejb-class>au.com.alphawest.trader.rfx.business.management.RFXManagerBean</ejb-class>
    <session-type>Stateful</session-type>
    <transaction-type>Container</transaction-type>
    <ejb-local-ref>
    <ejb-ref-name>ejb/rfx/RFXDocument</ejb-ref-name>
    <ejb-ref-type>Entity</ejb-ref-type>
    <local-home>au.com.alphawest.trader.rfx.business.data.RFXDocumentLocalHome</local-home>
    <local>au.com.alphawest.trader.rfx.business.data.RFXDocumentLocal</local>
    <ejb-link>RFXDocument</ejb-link>
    </ejb-local-ref>
    </session>
    <entity>
    <display-name>RFXAttachment</display-name>
    <ejb-name>RFXAttachment</ejb-name>
    <local-home>au.com.alphawest.trader.rfx.business.data.RFXAttachmentLocalHome</local-home>
    <local>au.com.alphawest.trader.rfx.business.data.RFXAttachmentLocal</local>
    <ejb-class>au.com.alphawest.trader.rfx.business.data.RFXDocumentAttachment</ejb-class>
    <persistence-type>Container</persistence-type>
    <prim-key-class>java.lang.String</prim-key-class>
    <reentrant>False</reentrant>
    <abstract-schema-name>RFXAttachment</abstract-schema-name>
    <cmp-field>
    <field-name>name</field-name>
    </cmp-field>
    <cmp-field>
    <field-name>type</field-name>
    </cmp-field>
    <cmp-field>
    <field-name>attachmentContents</field-name>
    </cmp-field>
    <primkey-field>name</primkey-field>
    </entity>
    <entity>
    <display-name>RFXDocument</display-name>
    <ejb-name>RFXDocument</ejb-name>
    <local-home>au.com.alphawest.trader.rfx.business.data.RFXDocumentLocalHome</local-home>
    <local>au.com.alphawest.trader.rfx.business.data.RFXDocumentLocal</local>
    <ejb-class>au.com.alphawest.trader.rfx.business.data.RFXDocumentBean</ejb-class>
    <persistence-type>Container</persistence-type>
    <prim-key-class>au.com.alphawest.trader.rfx.business.data.RFXDocumentPK</prim-key-class>
    <reentrant>False</reentrant>
    <abstract-schema-name>RFXDocument</abstract-schema-name>
    <cmp-field>
    <field-name>documentGUID</field-name>
    </cmp-field>
    <cmp-field>
    <field-name>creationDate</field-name>
    </cmp-field>
    <cmp-field>
    <field-name>creatorGUID</field-name>
    </cmp-field>
    <cmp-field>
    <field-name>description</field-name>
    </cmp-field>
    <cmp-field>
    <field-name>dueDate</field-name>
    </cmp-field>
    <cmp-field>
    <field-name>emailAddress</field-name>
    </cmp-field>
    <cmp-field>
    <field-name>faxNo</field-name>
    </cmp-field>
    <cmp-field>
    <field-name>locked</field-name>
    </cmp-field>
    <cmp-field>
    <field-name>notes</field-name>
    </cmp-field>
    <cmp-field>
    <field-name>organisationName</field-name>
    </cmp-field>
    <cmp-field>
    <field-name>ownerGUID</field-name>
    </cmp-field>
    <cmp-field>
    <field-name>requestId</field-name>
    </cmp-field>
    <cmp-field>
    <field-name>subject</field-name>
    </cmp-field>
    <cmp-field>
    <field-name>telephoneNo</field-name>
    </cmp-field>
    <cmp-field>
    <field-name>unitGUID</field-name>
    </cmp-field>
    <cmp-field>
    <field-name>buyer</field-name>
    </cmp-field>
    <cmp-field>
    <field-name>organisationGUID</field-name>
    </cmp-field>
    <cmp-field>
    <field-name>sourceId</field-name>
    </cmp-field>
    <ejb-local-ref>
    <ejb-ref-name>ejb/rfx/RFXDocumentAttachment</ejb-ref-name>
    <ejb-ref-type>Entity</ejb-ref-type>
    <local-home>au.com.alphawest.trader.rfx.business.data.RFXAttachmentLocalHome</local-home>
    <local>au.com.alphawest.trader.rfx.business.data.RFXAttachmentLocal</local>
    <ejb-link>RFXAttachment</ejb-link>
    </ejb-local-ref>
    <ejb-local-ref>
    <description>A line item attached to this document</description>
    <ejb-ref-name>ejb/rfx/RFXLineItem</ejb-ref-name>
    <ejb-ref-type>Entity</ejb-ref-type>
    <local-home>au.com.alphawest.trader.rfx.business.data.RFXLineItemLocalHome</local-home>
    <local>au.com.alphawest.trader.rfx.business.data.RFXLineItemLocal</local>
    <ejb-link>RFXLineItemBean</ejb-link>
    </ejb-local-ref>
    <query>
    <description>Find the rfx documents related to the given supplier through it's line items</description>
    <query-method>
    <method-name>findBySupplierId</method-name>
    <method-params>
    <method-param>java.lang.String</method-param>
    </method-params>
    </query-method>
    <ejb-ql>SELECT OBJECT(d) FROM RFXDocument AS d, IN(d.lineItems) l WHERE l.supplierGuid = 'DummySupplierGuid'</ejb-ql>
    </query>
    </entity>
    <entity>
    <display-name>RFXLineItem</display-name>
    <ejb-name>RFXLineItem</ejb-name>
    <local-home>au.com.alphawest.trader.rfx.business.data.RFXLineItemLocalHome</local-home>
    <local>au.com.alphawest.trader.rfx.business.data.RFXLineItemLocal</local>
    <ejb-class>au.com.alphawest.trader.rfx.business.data.RFXLineItemBean</ejb-class>
    <persistence-type>Container</persistence-type>
    <prim-key-class>java.math.BigDecimal</prim-key-class>
    <reentrant>False</reentrant>
    <abstract-schema-name>RFXLineItem</abstract-schema-name>
    <cmp-field>
    <field-name>itemId</field-name>
    </cmp-field>
    <cmp-field>
    <field-name>rfxGuid</field-name>
    </cmp-field>
    <cmp-field>
    <field-name>contractCode</field-name>
    </cmp-field>
    <cmp-field>
    <field-name>supplierGuid</field-name>
    </cmp-field>
    <cmp-field>
    <field-name>productCode</field-name>
    </cmp-field>
    <cmp-field>
    <field-name>description</field-name>
    </cmp-field>
    <cmp-field>
    <field-name>quantity</field-name>
    </cmp-field>
    <cmp-field>
    <field-name>units</field-name>
    </cmp-field>
    <primkey-field>itemId</primkey-field>
    </entity>
    </enterprise-beans>
    <relationships>
    <ejb-relation>
    <ejb-relation-name>RFXDocument-RFXAttachment</ejb-relation-name>
    <ejb-relationship-role>
    <ejb-relationship-role-name>RFXDocument</ejb-relationship-role-name>
    <multiplicity>One</multiplicity>
    <relationship-role-source>
    <ejb-name>RFXDocument</ejb-name>
    </relationship-role-source>
    <cmr-field>
    <cmr-field-name>attachments</cmr-field-name>
    <cmr-field-type>java.util.Collection</cmr-field-type>
    </cmr-field>
    </ejb-relationship-role>
    <ejb-relationship-role>
    <ejb-relationship-role-name>RFXAttachment</ejb-relationship-role-name>
    <multiplicity>Many</multiplicity>
    <cascade-delete/>
    <relationship-role-source>
    <ejb-name>RFXAttachment</ejb-name>
    </relationship-role-source>
    </ejb-relationship-role>
    </ejb-relation>
    <ejb-relation>
    <ejb-relation-name>RFXDocument-RFXLineItem</ejb-relation-name>
    <ejb-relationship-role>
    <ejb-relationship-role-name>RFXDocument</ejb-relationship-role-name>
    <multiplicity>One</multiplicity>
    <relationship-role-source>
    <ejb-name>RFXDocument</ejb-name>
    </relationship-role-source>
    <cmr-field>
    <cmr-field-name>lineItems</cmr-field-name>
    <cmr-field-type>java.util.Set</cmr-field-type>
    </cmr-field>
    </ejb-relationship-role>
    <ejb-relationship-role>
    <ejb-relationship-role-name>RFXLineItem</ejb-relationship-role-name>
    <multiplicity>Many</multiplicity>
    <cascade-delete/>
    <relationship-role-source>
    <ejb-name>RFXLineItem</ejb-name>
    </relationship-role-source>
    </ejb-relationship-role>
    </ejb-relation>
    </relationships>
    <assembly-descriptor>
    <container-transaction>
    <description>This value was set as a default by Sun ONE Studio.</description>
    <method>
    <ejb-name>RFXAttachment</ejb-name>
    <method-name>*</method-name>
    </method>
    <trans-attribute>Required</trans-attribute>
    </container-transaction>
    <container-transaction>
    <description>This value was set as a default by Sun ONE Studio.</description>
    <method>
    <ejb-name>RFXDocument</ejb-name>
    <method-name>*</method-name>
    </method>
    <trans-attribute>Required</trans-attribute>
    </container-transaction>
    <container-transaction>
    <description>This value was set as a default by Sun ONE Studio.</description>
    <method>
    <ejb-name>RFXLineItem</ejb-name>
    <method-name>*</method-name>
    </method>
    <trans-attribute>Required</trans-attribute>
    </container-transaction>
    <container-transaction>
    <description>This value was set as a default by Sun ONE Studio.</description>
    <method>
    <ejb-name>RFXManager</ejb-name>
    <method-name>*</method-name>
    </method>
    <trans-attribute>Required</trans-attribute>
    </container-transaction>
    </assembly-descriptor>
    </ejb-jar>
    I get the following error message when i try to run the EJB Module through the Sun One Verifier Tool:
    Error: ** Error trying to process file: java.lang.RuntimeException: No method found for XML query element: Ambiguous or invalid <query-method>
    java.lang.RuntimeException: No method found for XML query element: Ambiguous or invalid <query-method>
    at com.sun.enterprise.deployment.xml.EjbNode.parseQueries(EjbNode.java:700)
    at com.sun.enterprise.deployment.xml.EjbNode.completeLoadingDescriptor(EjbNode.java:671)
    at com.sun.enterprise.deployment.xml.EjbBundleNode.completeLoadingDescriptor(EjbBundleNode.java:524)
    at com.iplanet.ias.deployment.EjbBundleXmlReader.load(EjbBundleXmlReader.java:249)
    at com.iplanet.ias.deployment.EjbBundleXmlReader.loadStdAloneModule(EjbBundleXmlReader.java:162)
    at com.sun.enterprise.tools.verifier.Verifier.openEjbJar(Verifier.java:2421)
    at com.sun.enterprise.tools.verifier.Verifier.loadEjbJar(Verifier.java:1318)
    at com.sun.enterprise.tools.verifier.Verifier.loadJar(Verifier.java:866)
    at com.sun.enterprise.tools.verifier.gui.MainPanel.run(MainPanel.java:187)
    at java.lang.Thread.run(Thread.java:536)
    Look in file "RFXModule.jar_verified.xml" for detailed results on test assertions.
    Any help would be greatly appreciated.
    Mark Hesketh

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

Maybe you are looking for